Support Laberthread : Ein Image nach Wunsch / Ein Wunschimage

[rolu2]

Bau gerade MI für 7580 und 7590. Bei Freetz soll sich was getan haben. Neue Oscam für 7580 und 7590 lade ich nachher mal hoch. @16v dann mal testen

Gesendet von meinem SM-A520F mit Tapatalk

So beide MI sind auf dem Teamserver

@16v
Diese

Sie müssen registriert sein, um Links zu sehen.

mal auf deiner 7580 testen. Wenn sie nicht lauft, das neue MI über Freetz drüberflashen und nochmal die oscam testen

 

[16v]

O.K.
OSCAM ist erstmal drauf, läuft auch - ABER:
modprobe: module ftdi_sio not found in modules.dep
Lade USB-Serial Module ... fertig.
Starte oscam ... fertig.

 

[rolu2]

Karten werden erkannt?

 

[16v]

ich meine ja, card detected steht irgendwo dazwischen

Spoiler

• 2018/08/04 13:19:04 00000000 s (main) System name = Linux
• 2018/08/04 13:19:04 00000000 s (main) Host name = fritz.box
• 2018/08/04 13:19:04 00000000 s (main) Release = 3.10.104
• 2018/08/04 13:19:04 00000000 s (main) Version = #1 SMP Tue Jul 17 17:42:16 CEST 2018
• 2018/08/04 13:19:04 00000000 s (main) Machine = mips
• 2018/08/04 13:19:04 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 13376
• 2018/08/04 13:19:04 00000000 s (emu) OSCam-Emu version 770
• 2018/08/04 13:19:04 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/08/04 13:19:04 00000000 s (main) signal handling initialized
• 2018/08/04 13:19:04 00000000 s (config) 171 service-id's loaded in 2 ms
• 2018/08/04 13:19:04 00000000 s (net) cccam: initialized (fd=4, port=13000)
• 2018/08/04 13:19:04 00000000 s (reader) triplereader00 [smargo] creating thread for device /dev/ttyUSB0
• 2018/08/04 13:19:04 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2018/08/04 13:19:04 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/08/04 13:19:04 00000000 s (main) waiting for local card init
• 2018/08/04 13:19:05 21A70B09 h (webif) webif: decompressed 178305 bytes back into 440028 bytes
• 2018/08/04 13:19:05 5FAEBE50 r (emu) Stream key delayer initialized
• 2018/08/04 13:19:05 5FAEBE50 r (emu) Stream relay server initialized
• 2018/08/04 13:19:05 00000000 (emu) INFO: FFDecsa parallel mode = 64
• 2018/08/04 13:19:05 21A70B09 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/08/04 13:19:05 5FAEBE50 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2018/08/04 13:19:05 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:05 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:05 5FAEBE50 r (reader) emulator [emu] card detected
• 2018/08/04 13:19:06 5FAEBE50 r (reader) emulator [emu] found card system emu
• 2018/08/04 13:19:06 5FAEBE50 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/08/04 13:19:07 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:07 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:07 5FAEBE50 r (emu) Reading key file: /var/media/ftp/addon/oscam/SoftCam.Key
• 2018/08/04 13:19:07 5FAEBE50 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0
• 2018/08/04 13:19:09 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:09 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:11 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:11 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:13 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:13 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:15 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:15 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:17 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:17 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:19 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:19 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:21 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:21 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:23 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:23 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:25 7D9DEBAC r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 13:19:25 7D9DEBAC r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 13:19:25 00000000 s (main) init for all local cards done
• 2018/08/04 13:19:25 00000000 s (anticasc) anti cascading disabled
• 2018/08/04 13:19:25 68549092 c (client) encrypted cccam-client 192.168.178.250 granted (user, au=auto (4 reader))
• 2018/08/04 13:19:25 01FB9F69 c (client) anonymous disconnected from 192.168.178.250

bezieht sich auf den EMU nicht auf den Reader...

Hab jetzt auch das MI komplett geflashed, selbiges.

FTDI SIO nicht geladen...

 

[rolu2]

mach mal über konsole ein

lsmod

und poste das Ergebniss

 

[16v]

7580

Spoiler

root@fritz:/var/mod/root# lsmod
Module Size Used by Tainted: P
ltq_eth_oam_handler 2709 0
spdmon 18026 0
hwmon 1065 1 spdmon
ulpcmlink 31820 0
krtp 226927 0
qca_ol 1065408 0
umac 1714589 2 qca_ol
ath_spectral 40084 2 qca_ol
ath_dfs 76293 2 qca_ol,umac
qdf 23677 4 qca_ol,umac,ath_spectral,ath_dfs
asf 7534 4 qca_ol,umac,ath_spectral,ath_dfs
mem_manager 7006 2 qca_ol,umac
aae 116871 3 qca_ol,umac,ath_dfs
userman_mod 77186 4
kdsldmod 1614499 9 userman_mod
cprocfsmod 7042 1 kdsldmod
dect_io 17443 2
avm_dect 320285 1 dect_io
capi_codec 379977 0
isdn_fbox_fon5 894601 6 krtp
pcmlink 412372 5 ulpcmlink,avm_dect,capi_codec,isdn_fbox_fon5
vrx318_tc 190908 0
drv_dsl_cpe_api 297452 2
drv_mei_cpe 162346 3 drv_dsl_cpe_api
xhci_hcd 95121 0
sch_tbf 4979 2
sch_hw 7256 0
ppa_api_proc 33447 0
ppa_api 388242 1 ppa_api_proc
ltq_directpath_datapath 28361 0
ltq_tmu_hal_drv 180535 1 ltq_directpath_datapath
ltq_pae_hal 68166 0
nls_utf8 1040 0
vfat 10593 0
Piglet_noemif 41845 0
rtc_avm 4604 1 pcmlink
led_modul_Fritz_Box_HW225 177207 8
root@fritz:/var/mod/root#

7240

Spoiler

root@fritz:/var/mod/root# lsmod
Module Size Used by Tainted: P
pl2303 20580 0
ftdi_sio 33784 0
usbserial 29962 2 pl2303,ftdi_sio
rtc_avm 6557 1
rtc_sysfs 2704 0
rtc_proc 3847 0
rtc_dev 5493 1
rtc_core 7083 4 rtc_avm,rtc_sysfs,rtc_proc,rtc_dev
rtc_lib 2712 3 rtc_avm,rtc_sysfs,rtc_core
rfcntl 60107 0
avm_audio 33714 3 rfcntl
wlan_scan_ap 8929 1
wlan_acl 4090 1
wlan_wep 6086 0
wlan_tkip 12469 2
wlan_ccmp 8456 0
wlan_xauth 1182 0
ath_pci 155588 0
ath_spectral 95128 1 ath_pci
ath_rate_atheros 61891 1 ath_pci
wlan 232597 9 wlan_scan_ap,wlan_acl,wlan_wep,wlan_tkip,wlan_ccmp,wlan_xauth,ath_pci,ath_rate_atheros
ath_dfs 39299 3 wlan_scan_ap,ath_pci,wlan
ath_hal 242360 5 ath_pci,ath_spectral,ath_rate_atheros,ath_dfs
avm_ath_extensions 47349 7 rfcntl,wlan_scan_ap,ath_pci,ath_rate_atheros,wlan,ath_dfs,ath_hal
kdsldmod 985632 4
musb_hdrc 37123 0
usbcore 126616 5 pl2303,ftdi_sio,usbserial,musb_hdrc
dect_io 16010 0
avm_dect 231543 1 dect_io
capi_codec 350438 0
isdn_fbox_fon5 766545 7
pcmlink 336739 3 avm_dect,capi_codec,isdn_fbox_fon5
dsl_ur8 182890 0
ext2 58217 1
mbcache 7019 1 ext2
loop 13938 2
jffs2 115397 1
Piglet_noemif 41751 0
led_modul_Fritz_Box_7240 61487 3 ath_hal

bei der 7580 fehlen die Module
pl2303
ftdi_sio
usbserial

 

[rolu2]

Bei der 7240 ist es drin

pl2303 20580 0
ftdi_sio 33784 0
usbserial 29962 2 pl2303,ftdi_sio

Somit geht da erstmal kein mouseprotokoll

 

[16v]

wo geht kein Mouse protokoll?
Bei der 7580?
Aber der Argolis triple kann doch auch anderst oder?

Nur hab ich halt eher keine Ahnung...
Und wieso tut der dann auf der 7240 nicht?

 

[rolu2]

wo geht kein Mouse protokoll?
Bei der 7580?

Bei OS70

Aber der Argolis triple kann doch auch anderst oder?

Das Teil ist nicht der Brüller

Und wieso tut der dann auf der 7240 nicht?

[/QUOTE]

Hattest du da den Reader schon?

 

[16v]

ne, an der 7240 is noch NIE ein reader gelaufen.
Sollte nur als Backup dienen, falls eben - so wie jetzt - was schief läuft...

Der Triple ist der 1. Reader im Haus, und der Einzige, und vorher lief der wundergutestens. Kann nicht verstehen, warum der so schlecht sein soll!?

 

[rolu2]

spiel mal bei der 7240 das neuste

Sie müssen registriert sein, um Links zu sehen.

drauf und wir gucken mal wegen dem Reader

Einfach über Freetz drüberflashen

 

[16v]

Geht ned!
wegen dem Mini support...

Ich hab jetzt 3 Reader angelegt, mit allem möglichem... auf der 7580
OSCAM LOG

Spoiler

• 2018/08/04 15:21:42 00000000 s (main) System name = Linux
• 2018/08/04 15:21:42 00000000 s (main) Host name = fritz.box
• 2018/08/04 15:21:42 00000000 s (main) Release = 3.10.104
• 2018/08/04 15:21:42 00000000 s (main) Version = #1 SMP Tue Jul 17 17:42:16 CEST 2018
• 2018/08/04 15:21:42 00000000 s (main) Machine = mips
• 2018/08/04 15:21:42 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 14475
• 2018/08/04 15:21:42 00000000 s (emu) OSCam-Emu version 770
• 2018/08/04 15:21:42 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/08/04 15:21:42 00000000 s (main) signal handling initialized
• 2018/08/04 15:21:42 00000000 s (config) 171 service-id's loaded in 3 ms
• 2018/08/04 15:21:42 00000000 s (net) cccam: initialized (fd=4, port=13000)
• 2018/08/04 15:21:42 00000000 s (reader) argolis [smartreader] creating thread for device 001:002
• 2018/08/04 15:21:42 00000000 s (reader) hdplus_HD01 [smartreader] creating thread for device reader1;Serial:00000a3a
• 2018/08/04 15:21:42 00000000 s (reader) triplereader00 [smargo] creating thread for device /dev/ttyUSB0
• 2018/08/04 15:21:42 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2018/08/04 15:21:42 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/08/04 15:21:42 00000000 s (main) waiting for local card init
• 2018/08/04 15:21:42 643D283C r (emu) Stream key delayer initialized
• 2018/08/04 15:21:42 643D283C r (emu) Stream relay server initialized
• 2018/08/04 15:21:42 00000000 (emu) INFO: FFDecsa parallel mode = 64
• 2018/08/04 15:21:42 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:42 643D283C r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2018/08/04 15:21:42 75360D0C h (webif) webif: decompressed 178305 bytes back into 440028 bytes
• 2018/08/04 15:21:42 75360D0C h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/08/04 15:21:42 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:42 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:42 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:42 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:42 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:42 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:21:43 643D283C r (reader) emulator [emu] card detected
• 2018/08/04 15:21:44 643D283C r (reader) emulator [emu] found card system emu
• 2018/08/04 15:21:44 643D283C r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/08/04 15:21:44 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:44 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:44 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:44 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:44 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:44 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:44 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:21:44 643D283C r (emu) Reading key file: /var/media/ftp/addon/oscam/SoftCam.Key
• 2018/08/04 15:21:44 643D283C r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0
• 2018/08/04 15:21:46 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:46 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:46 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:46 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:46 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:46 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:46 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:21:48 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:48 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:48 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:48 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:48 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:48 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:48 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:21:50 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:50 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:50 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:50 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:50 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:50 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:50 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:21:52 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:52 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:52 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:52 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:52 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:52 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:52 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:21:54 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:54 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:54 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:54 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:54 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:54 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:54 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:21:56 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:56 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:56 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:56 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:56 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:56 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:56 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:21:58 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:21:58 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:21:58 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:21:58 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:21:58 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:21:58 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:21:58 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:22:00 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:22:00 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:22:00 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:22:00 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:22:00 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:22:00 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:22:00 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:22:02 74B15982 r (reader) argolis [smartreader] Smartreader device 001:002 not found
• 2018/08/04 15:22:02 74B15982 r (reader) argolis [smartreader] Cannot open device: 001:002
• 2018/08/04 15:22:02 596D6AD6 r (reader) hdplus_HD01 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2018/08/04 15:22:02 596D6AD6 r (reader) hdplus_HD01 [smartreader] Smartreader device Serial:00000a3a not found
• 2018/08/04 15:22:02 596D6AD6 r (reader) hdplus_HD01 [smartreader] Cannot open device: reader1;Serial:00000a3a
• 2018/08/04 15:22:02 17EE7C26 r (reader) triplereader00 [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
• 2018/08/04 15:22:02 17EE7C26 r (reader) triplereader00 [smargo] Cannot open device: /dev/ttyUSB0
• 2018/08/04 15:22:03 00000000 s (main) init for all local cards done
• 2018/08/04 15:22:03 00000000 s (anticasc) anti cascading disabled
• 2018/08/04 15:22:03 4E797081 c (client) anonymous disconnected from 192.168.178.250
• 2018/08/04 15:22:03 7C8351FC c (client) encrypted cccam-client 192.168.178.250 granted (user, au=auto (6 reader))

oscam server:

Spoiler

[reader]
label = argolis
protocol = smartreader
device = 001:002
device_out_endpoint = 0x81
smargopatch = 1
fallback = 1
caid = 1830
boxkey = A7637C
rsakey = BF358B546186313068E4D9C5CCA4DD5
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,3,2,0




[reader]
label = hdplus_HD01
protocol = smartreader
device = reader1;Serial:00000a3a
device_out_endpoint = 0x81
smargopatch = 1
fallback = 1
caid = 1830
boxkey = A764
rsakey = BF358B5461863130686FC933FB
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,3,2,0


[reader]
label = triplereader00
protocol = smargo
device = /dev/ttyUSB0
smargopatch = 1
fallback = 1
caid = 1830
boxkey = A76
rsakey = BF358B54618631306
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,3,2,0

 

[rolu2]

Geht ned!
wegen dem Mini support...

Schick mir mal das Image oder speicher unter Freetz-Info mal die

.config

und poste die mal hier

 

[16v]

Bitteschön

Du musst Regestriert sein, um das angehängte Bild zusehen.

Gesendet von meinem SM-G920F mit Tapatalk

 

[rolu2]

Geht ned!
wegen dem Mini support...

Warum was das so wichtig?