AW: Freischaltung der "neuen" V14 mit OScam
Hallo,
viel gelesen - nicht nur in diesem Thread - aber nun gehts mit der V14 nicht weiter.
Mein Equipment:
Fritzbox 7170
Oscam r9878
TV-Karte Skystar HD2
DVB-Viewer mit Hadu (CCCam)
2x Optimuss underline
Mit der S02 hat alles wunderbar funktioniert.
Hier die configs
oscam.conf
oscam.server
oscam.user
und hier mein LiveLog
Wenn ich das richtig interpretiere, wird die Karte erkannt, aber der Sender nicht gefunden. Ich habe gestern von 23.00 Uhr bis heute morgen 8:00 Uhr die Kiste laufen lassen - nicht ein emm ist angekommen (Freischaltsignal wurde online gestern gegen 17:00 Uhr angefordert).
Watt nu ? Ich brauch Eure Hilfe.....
Gruß
Hallo,
viel gelesen - nicht nur in diesem Thread - aber nun gehts mit der V14 nicht weiter.
Mein Equipment:
Fritzbox 7170
Oscam r9878
TV-Karte Skystar HD2
DVB-Viewer mit Hadu (CCCam)
2x Optimuss underline
Mit der S02 hat alles wunderbar funktioniert.
Hier die configs
oscam.conf
[global]
logfile = /var/tbmodlog/oscam.log
usrfile = /var/tbmodlog/oscamuser.log
nice = -1
maxlogsize = 10000
preferlocalcards = 1
[cccam]
Port = xxxxx
Version = 2.1.1
keepconnected = 1
stealth = 1
[monitor]
port = xxxxx
aulow = 120
monlevel = 1
hideclient_to = 15
[webif]
httpport = xxxxx
httpuser = xxxxx
httppwd = xxxxx
httphelplang = de
httprefresh = 10
#httpshowecminfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 15
[cache]
delay = 5
logfile = /var/tbmodlog/oscam.log
usrfile = /var/tbmodlog/oscamuser.log
nice = -1
maxlogsize = 10000
preferlocalcards = 1
[cccam]
Port = xxxxx
Version = 2.1.1
keepconnected = 1
stealth = 1
[monitor]
port = xxxxx
aulow = 120
monlevel = 1
hideclient_to = 15
[webif]
httpport = xxxxx
httpuser = xxxxx
httppwd = xxxxx
httphelplang = de
httprefresh = 10
#httpshowecminfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 15
[cache]
delay = 5
oscam.server
[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 600
#cardmhz = 357
group = 1
#ecmwhitelist = 098C:98,9B,97,57,91 könnt ihr für den Anfang auch weg lassen
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
label = V14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 600
#cardmhz = 357
group = 1
#ecmwhitelist = 098C:98,9B,97,57,91 könnt ihr für den Anfang auch weg lassen
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
oscam.user
[account]
User = TVKARTE
Pwd = xxxxx
au = V14
group = 1
[account]
user = underline
pwd = xxxxx
group = 1
[account]
user = underlineBS
pwd = xxxxx
group = 1
User = TVKARTE
Pwd = xxxxx
au = V14
group = 1
[account]
user = underline
pwd = xxxxx
group = 1
[account]
user = underlineBS
pwd = xxxxx
group = 1
und hier mein LiveLog
2014/10/05 23:08:56 0 s >> OSCam << cardserver started, version 1.20-unstable-patch, build r9878 (mipsel-linux-uclibc-libusb)
2014/10/05 23:08:56 0 s creating pidfile /var/run/oscam.pid with pid 2663
2014/10/05 23:08:56 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/10/05 23:08:56 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/10/05 23:08:56 0 s signal handling initialized
2014/10/05 23:08:56 0 s 162 service-id's loaded in 23 ms
2014/10/05 23:08:56 0 s 116 tier-id's loaded
2014/10/05 23:08:56 0 s 3 provid's loaded
2014/10/05 23:08:56 0 s 22 lengths for caid guessing loaded
2014/10/05 23:08:56 0 s monitor: Cannot create socket (errno=124: Address family not supported by protocol)
2014/10/05 23:08:56 0 s monitor: Trying fallback to IPv4
2014/10/05 23:08:56 0 s monitor: setsockopt(IPV6_V6ONLY) failed (errno=99: Protocol not available)
2014/10/05 23:08:56 0 s monitor: initialized (fd=9, port=988)
2014/10/05 23:08:56 0 s cccam: Cannot create socket (errno=124: Address family not supported by protocol)
2014/10/05 23:08:56 0 s cccam: Trying fallback to IPv4
2014/10/05 23:08:56 0 s cccam: setsockopt(IPV6_V6ONLY) failed (errno=99: Protocol not available)
2014/10/05 23:08:56 0 s cccam: initialized (fd=10, port=17124)
2014/10/05 23:08:56 0 s V14 [mouse] creating thread for device /dev/ttyUSB0
2014/10/05 23:08:56 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/10/05 23:08:56 0 s waiting for local card init
2014/10/05 23:08:56 51ABE8 h webif: decompressed 146978 bytes back into 345812 bytes
2014/10/05 23:08:56 51ABE8 h HTTP Server: ERROR: Creating IPv6 socket failed! (errno=124 Address family not supported by protocol)
2014/10/05 23:08:56 51ABE8 h HTTP Server: Falling back to IPv4.
2014/10/05 23:08:56 51ABE8 h HTTP Server running. ip=:: port=83
2014/10/05 23:08:57 518D70 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2014/10/05 23:08:57 518D70 r V14 [mouse] card detected
2014/10/05 23:08:59 518D70 r V14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/10/05 23:08:59 518D70 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/10/05 23:08:59 518D70 r V14 [mouse] Setting baudrate to 38400 bps
2014/10/05 23:08:59 518D70 r V14 [mouse] Calculated work ETU is 20.15 us reader mhz = 600
2014/10/05 23:08:59 518D70 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/10/05 23:09:00 518D70 r V14 [mouse] Card type: P1TV
2014/10/05 23:09:00 518D70 r V14 [mouse] Rom version: 20AA
2014/10/05 23:09:00 518D70 r V14 [mouse] Credit available on card: 0 euro
2014/10/05 23:09:00 518D70 r V14 [mouse] Extended 4C detected
2014/10/05 23:09:00 518D70 r V14 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2014/10/05 23:09:00 518D70 r V14 [mouse] found card system videoguard2
2014/10/05 23:09:00 518D70 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/10/05 23:09:00 518D70 r V14 [videoguard2] card detected
2014/10/05 23:09:00 518D70 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/10/05 23:09:02 518D70 r V14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/10/05 23:09:02 518D70 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/10/05 23:09:02 518D70 r V14 [mouse] Setting baudrate to 153600 bps
2014/10/05 23:09:02 518D70 r V14 [mouse] Calculated work ETU is 5.04 us reader mhz = 600
2014/10/05 23:09:02 518D70 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/10/05 23:09:03 518D70 r V14 [mouse] Card type: P1TV
2014/10/05 23:09:03 518D70 r V14 [mouse] Rom version: 20AA
2014/10/05 23:09:03 518D70 r V14 [mouse] Credit available on card: 0 euro
2014/10/05 23:09:03 518D70 r V14 [mouse] Extended 4C detected
2014/10/05 23:09:03 518D70 r V14 [mouse] FuseByte: 00
2014/10/05 23:09:03 518D70 r V14 [mouse] Region Code:
2014/10/05 23:09:03 518D70 r V14 [mouse] Country Code: DEU
2014/10/05 23:09:03 518D70 r V14 [mouse] Pincode read: 5887
2014/10/05 23:09:03 518D70 r V14 [mouse] PCB settings: FF FF FF FF
2014/10/05 23:09:03 518D70 r V14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/10/05 23:09:03 518D70 r V14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/10/05 23:09:03 518D70 r V14 [mouse] ready for requests
2014/10/05 23:09:03 518D70 r V14 [mouse] found card system videoguard2
2014/10/05 23:09:03 518D70 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/10/05 23:09:03 518D70 r V14 [videoguard2] card detected
2014/10/05 23:09:03 518D70 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/10/05 23:09:08 0 s init for all local cards done
2014/10/05 23:09:08 0 s anti cascading disabled
2014/10/05 23:09:08 531540 c encrypted cccam-client 112.193.183.42 granted (TVKARTE, au=on (1 reader))
2014/10/05 23:09:29 518D70 r V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2014/10/05 23:09:29 518D70 r V14 [videoguard2] classD3 ins54: no cw --> Card is paired
2014/10/05 23:09:29 531540 c TVKARTE (098C&000000/01FB/0017/98:73B6B224869EA2E846E0F8576B7C7B57): not found (124 ms) by V14
2014/10/05 23:09:30 531540 c TVKARTE (098C&000000/01FB/0017/98:73B6B224869EA2E846E0F8576B7C7B57): not found (3 ms) by V14
2014/10/05 23:09:32 0 --- Skipped 1 duplicated log lines ---
2014/10/05 23:09:32 531540 c TVKARTE (098C&000000/01FB/0017/98:73B6B224869EA2E846E0F8576B7C7B57): not found (4 ms) by V14
2014/10/05 23:09:33 531540 c TVKARTE (098C&000000/01FB/0017/98:73B6B224869EA2E846E0F8576B7C7B57): not found (3 ms) by V14
2014/10/06 08:01:25 531540 c TVKARTE disconnected from 112.193.183.42
2014/10/05 23:08:56 0 s creating pidfile /var/run/oscam.pid with pid 2663
2014/10/05 23:08:56 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/10/05 23:08:56 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/10/05 23:08:56 0 s signal handling initialized
2014/10/05 23:08:56 0 s 162 service-id's loaded in 23 ms
2014/10/05 23:08:56 0 s 116 tier-id's loaded
2014/10/05 23:08:56 0 s 3 provid's loaded
2014/10/05 23:08:56 0 s 22 lengths for caid guessing loaded
2014/10/05 23:08:56 0 s monitor: Cannot create socket (errno=124: Address family not supported by protocol)
2014/10/05 23:08:56 0 s monitor: Trying fallback to IPv4
2014/10/05 23:08:56 0 s monitor: setsockopt(IPV6_V6ONLY) failed (errno=99: Protocol not available)
2014/10/05 23:08:56 0 s monitor: initialized (fd=9, port=988)
2014/10/05 23:08:56 0 s cccam: Cannot create socket (errno=124: Address family not supported by protocol)
2014/10/05 23:08:56 0 s cccam: Trying fallback to IPv4
2014/10/05 23:08:56 0 s cccam: setsockopt(IPV6_V6ONLY) failed (errno=99: Protocol not available)
2014/10/05 23:08:56 0 s cccam: initialized (fd=10, port=17124)
2014/10/05 23:08:56 0 s V14 [mouse] creating thread for device /dev/ttyUSB0
2014/10/05 23:08:56 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/10/05 23:08:56 0 s waiting for local card init
2014/10/05 23:08:56 51ABE8 h webif: decompressed 146978 bytes back into 345812 bytes
2014/10/05 23:08:56 51ABE8 h HTTP Server: ERROR: Creating IPv6 socket failed! (errno=124 Address family not supported by protocol)
2014/10/05 23:08:56 51ABE8 h HTTP Server: Falling back to IPv4.
2014/10/05 23:08:56 51ABE8 h HTTP Server running. ip=:: port=83
2014/10/05 23:08:57 518D70 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2014/10/05 23:08:57 518D70 r V14 [mouse] card detected
2014/10/05 23:08:59 518D70 r V14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/10/05 23:08:59 518D70 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/10/05 23:08:59 518D70 r V14 [mouse] Setting baudrate to 38400 bps
2014/10/05 23:08:59 518D70 r V14 [mouse] Calculated work ETU is 20.15 us reader mhz = 600
2014/10/05 23:08:59 518D70 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/10/05 23:09:00 518D70 r V14 [mouse] Card type: P1TV
2014/10/05 23:09:00 518D70 r V14 [mouse] Rom version: 20AA
2014/10/05 23:09:00 518D70 r V14 [mouse] Credit available on card: 0 euro
2014/10/05 23:09:00 518D70 r V14 [mouse] Extended 4C detected
2014/10/05 23:09:00 518D70 r V14 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2014/10/05 23:09:00 518D70 r V14 [mouse] found card system videoguard2
2014/10/05 23:09:00 518D70 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/10/05 23:09:00 518D70 r V14 [videoguard2] card detected
2014/10/05 23:09:00 518D70 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/10/05 23:09:02 518D70 r V14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/10/05 23:09:02 518D70 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/10/05 23:09:02 518D70 r V14 [mouse] Setting baudrate to 153600 bps
2014/10/05 23:09:02 518D70 r V14 [mouse] Calculated work ETU is 5.04 us reader mhz = 600
2014/10/05 23:09:02 518D70 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/10/05 23:09:03 518D70 r V14 [mouse] Card type: P1TV
2014/10/05 23:09:03 518D70 r V14 [mouse] Rom version: 20AA
2014/10/05 23:09:03 518D70 r V14 [mouse] Credit available on card: 0 euro
2014/10/05 23:09:03 518D70 r V14 [mouse] Extended 4C detected
2014/10/05 23:09:03 518D70 r V14 [mouse] FuseByte: 00
2014/10/05 23:09:03 518D70 r V14 [mouse] Region Code:
2014/10/05 23:09:03 518D70 r V14 [mouse] Country Code: DEU
2014/10/05 23:09:03 518D70 r V14 [mouse] Pincode read: 5887
2014/10/05 23:09:03 518D70 r V14 [mouse] PCB settings: FF FF FF FF
2014/10/05 23:09:03 518D70 r V14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/10/05 23:09:03 518D70 r V14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/10/05 23:09:03 518D70 r V14 [mouse] ready for requests
2014/10/05 23:09:03 518D70 r V14 [mouse] found card system videoguard2
2014/10/05 23:09:03 518D70 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/10/05 23:09:03 518D70 r V14 [videoguard2] card detected
2014/10/05 23:09:03 518D70 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/10/05 23:09:08 0 s init for all local cards done
2014/10/05 23:09:08 0 s anti cascading disabled
2014/10/05 23:09:08 531540 c encrypted cccam-client 112.193.183.42 granted (TVKARTE, au=on (1 reader))
2014/10/05 23:09:29 518D70 r V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2014/10/05 23:09:29 518D70 r V14 [videoguard2] classD3 ins54: no cw --> Card is paired
2014/10/05 23:09:29 531540 c TVKARTE (098C&000000/01FB/0017/98:73B6B224869EA2E846E0F8576B7C7B57): not found (124 ms) by V14
2014/10/05 23:09:30 531540 c TVKARTE (098C&000000/01FB/0017/98:73B6B224869EA2E846E0F8576B7C7B57): not found (3 ms) by V14
2014/10/05 23:09:32 0 --- Skipped 1 duplicated log lines ---
2014/10/05 23:09:32 531540 c TVKARTE (098C&000000/01FB/0017/98:73B6B224869EA2E846E0F8576B7C7B57): not found (4 ms) by V14
2014/10/05 23:09:33 531540 c TVKARTE (098C&000000/01FB/0017/98:73B6B224869EA2E846E0F8576B7C7B57): not found (3 ms) by V14
2014/10/06 08:01:25 531540 c TVKARTE disconnected from 112.193.183.42
Wenn ich das richtig interpretiere, wird die Karte erkannt, aber der Sender nicht gefunden. Ich habe gestern von 23.00 Uhr bis heute morgen 8:00 Uhr die Kiste laufen lassen - nicht ein emm ist angekommen (Freischaltsignal wurde online gestern gegen 17:00 Uhr angefordert).
Watt nu ? Ich brauch Eure Hilfe.....
Gruß