Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

KPCS Infos zu KPCS

    Nobody is reading this thread right now.
AW: Infos zu KPCS

Was mich aber doch verwundert ist, dass mittlerweile immer mehr kommen die es haben trotz des hohen Preises...

Es war nie so bekannt daher
Erst seit dem deb hier den Bereich hat kommen immer mehr
Alleine das hier immer die aktuelle Version gepostet wird ist einfach geiler Support speziell dann wenn so wie ich den Kontakt verloren habe bei dem ich es gekauft habe.
 
AW: Infos zu KPCS

Was gut ist, setzt sich auch durch. Ich muss aber auch sagen, das viele dass kpcs schon länger haben, jedoch durch den Support zu uns finden.
 
AW: Infos zu KPCS

Wie sieht es mit der Nova Karte aus? die ist vom provider auf maximal 3 sid´s begrenzt. läuft sie im kpcs ohne diese begrenzung?

wenn ja nehm ich´s sofort
 
Zuletzt bearbeitet:
AW: Infos zu KPCS

Ich kann nur von der BDC behaupten, das Sie keine grenze hat, dies ist jedoch mit jedem Cam der Fall. Eine Originale Nova liegt mir leider nicht vor.
 
AW: Infos zu KPCS

I try latest version . For CAID 4AEE, 5581 - card system not suported. This is true or not? Regards:ja
 
AW: Infos zu KPCS

Hallo zusammen ,


hab 2 Fragen :


1. Welche Hardware würdet ihr empfehlen ?


2. Funktioniert ORF Ice mit AU ? Über Oscam -->CCcam bekomme ich das nicht hin ?



Danke !
 
AW: Infos zu KPCS

Code:
[reader]
Enable           = 1
AU               = 1
Label            = bdc
Protocol         = mouse
Device           = /dev/reader-path
EMMCache         = 1,1,10
BaudRate        = 16000
Detect           = CD
Group            = 1
Fallback         = 0
flowcontrol      = none
Code:
[global]
Nice            = -1
ClientTimeout   = 6
ClientMaxIdle   = 60
CacheDelay      = 0
FallbackTimeout = 1
BindWait        = 10
ResolveDelay    = 10
DyndnsInterval  = 120
#LogFile         = stdout
LogFile         = /tmp/kpcs.log
PidFile         = /tmp/my.pid
MaxLogSize     = 10240
showecmdw = 0
showemmdw = 0
Filter = 1500
ReaderAlarm   = 1
serialreadertimeout=4
WaitCards=0

[newcamd]
Key  = 0102030405060708091011121314
Port = 12345@5581:0
The Easy Mouse II here must be set as follows:

SW2 = 5 Volt
SW1 = Phönix
SW4 = Sd by SW3
SW3 = Y4 (10MHz)

Please read CCcam entitlements, and show this
 
AW: Infos zu KPCS

/etc/sysctl.conf

#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables.
# See sysctl.conf (5) for information.
#

#kernel.domainname = example.com

# Uncomment the following to stop low-level messages on console
#kernel.printk = 4 4 1 7

##############################################################3
# Functions previously found in netbase
#

# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1

# Uncomment the next line to enable TCP/IP SYN cookies
#net.ipv4.tcp_syncookies=1

# Uncomment the next line to enable packet forwarding for IPv4
#net.ipv4.ip_forward=1

# Uncomment the next line to enable packet forwarding for IPv6
#net.ipv6.conf.all.forwarding=1


###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Ignore ICMP broadcasts
#net.ipv4.icmp_echo_ignore_broadcasts = 1
#
# Ignore bogus ICMP errors
#net.ipv4.icmp_ignore_bogus_error_responses = 1
#
# Do not accept ICMP redirects (prevent MITM attacks)
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
kernel.shmmax=2147483648
 
Zurück
Oben