Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Ich suche einen Patch für jede Linux- und CPU-Distribution.mit einem Patch für CAK7

you have a problem with your config....
can you post your config without keys ?
;

post just: oscam.server ;
;
 
[reader]
label =
description =
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1830
boxkey =
rsakey =
mod1 =
idird =
mod2 =
key3588 =
key3460 =
key3310 =
data50 =
mod50 =
nuid =
cwekey0 =
cak7_mode = 1
detect = cd
nagra_read = 1
mhz = 600
ident = 1830:000000,00AA80
group = 1,11,15
emmcache = 1,2,15,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
audisabled = 1
 
Zuletzt bearbeitet von einem Moderator:
#########################################
## reader configuration
###############################################
[readers]
label = MaxTV_1830
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1830
mod1 = xxxx
mod2 = xxxx
key3588 = xxxx
key3460 = xxxx
key3310 = xxxx
data50 = xxxx
mod50 = xxxx
idird = xxxx
ecmheader = 0
nuid = xxxx
cwekey = xxxx,xxxx,..........,xxxx
detect = cd
mhz = 600
cardmhz = 368
nagra_read = 1
detect_seca_nagra_tunneled_card= 2
ident = 1830:000000.00AA80.00AA81
groups = x
emmcache = 1,1,2,0
blockemm-unknown = 1
auprovid = 00AA80,00AA81

you don't need: boxkey && rsakey ;
with my oscam use cwekey = xxxx instead of cwekey0 = xxxx
;
 
Zuletzt bearbeitet:
problem is in card mode
must bee run in special mode
with your oscam and config not do this
here is a log with your oscam and conf
  • 2022/03/13 18:03:15 25E860D7 r (reader) maxtv [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 32 20 4D 65 72 52 32 36 4C
  • 2022/03/13 18:03:15 25E860D7 r (reader) maxtv [mouse] Setting baudrate to 187500 bps
  • 2022/03/13 18:03:15 25E860D7 r (reader) maxtv [mouse] card system not supported
  • 2022/03/13 18:03:15 25E860D7 r (reader) maxtv [mouse] Normal mode failed, reverting to Deprecated Mode
 
Zuletzt bearbeitet von einem Moderator:
please, copy the keys one by one using web inf then save and restart oscam.
########
don't forget these two parameters are very important:
ecmheader = 0
detect_seca_nagra_tunneled_card= 2
;
 
when add cwpk key oscam down , not working
  • 2022/03/13 18:27:26 0ADD4A5B r (reader) maxtv [mouse] card detected
  • 2022/03/13 18:27:27 0ADD4A5B r (reader) maxtv [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 32 20 4D 65 72 52 32 36 4C
  • 2022/03/13 18:27:27 0ADD4A5B r (reader) maxtv [mouse] Setting baudrate to 187500 bps
  • 2022/03/13 18:27:28 0ADD4A5B r (reader) maxtv [mouse] detect native nagra card
  • 2022/03/13 18:27:30 0ADD4A5B r (reader) maxtv [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2022/03/13 18:27:31 0ADD4A5B r (reader) maxtv [mouse] T1 Resync command error, trying to reactivate!
this is log from working oscam
  • 2022/03/13 18:28:29 15F371A0 r (reader) maxtv [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 38 32 20 52 65 76 52 32 36 1C
  • 2022/03/13 18:28:29 15F371A0 r (reader) maxtv [mouse] Initial AES: 90 E6 79 13 DA C1 E2 B7 FB A1 6B C0 2A 13 54 66
  • 2022/03/13 18:28:29 15F371A0 r (reader) maxtv [mouse] Setting baudrate to 187500 bps
  • 2022/03/13 18:28:30 15F371A0 r (reader) maxtv [mouse] Rom revision: DNASP482 RevR26
  • 2022/03/13 18:28:30 15F371A0 r (reader) maxtv [mouse] Card has DT05_00
  • 2022/03/13 18:28:30 15F371A0 r (reader) maxtv [mouse] DT05_00 is correct
  • 2022/03/13 18:28:30 15F371A0 r (reader) maxtv [mouse] Card has DT05_10
  • 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] Card has DT05_50
  • 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] Card has DT05_20
  • 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] OTP CSC No. of keys: 00 01
  • 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] OTA CSC No. of keys: 00 00
  • 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] card needs FASTreinit after 35999 CMDs
  • 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] DT05_10 is correct
  • 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] Card is starting in GLOBAL mode
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [mouse] New AES: F5 60 F0 32 42 18 53 E1 70 62 3F B1 D0 0D 51 9D
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [mouse] ready for requests
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [mouse] found card system nagra merlin
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] ROM: D N A S P 4 8 2
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] REV: R e v R 2 6
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] SER: ############
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] CAID: 1830
  • 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] Prv.ID: 00 00 AA 80 (sysid)
 
Zuletzt bearbeitet von einem Moderator:
can you try this one ?
use the config above
thanks
;
 

Anhänge

Du musst angemeldet sein, um die Anhangsliste zu sehen.
I don't know why not working with you ?
because in other forum tested and worked .
just with my oscam the config not same like the others.
##
cak7_mode is replaced by detect_seca_nagra_tunneled_card .
detect_seca_nagra_tunneled_card =
0 - Merlin, Cayman Cards [ 1856, 1884(NC+), 186A(HD04),...]
1 - Enabled (default) Seca/Nagra Cards
2 - Cameleon, cak6.x Cards [ 1811, 1813, 1830(Maxtv), 1843(HD02), 1860(HD03),...]
;
 
  • OSCam r11704-798

am on this forum "linusat-support"
whats your nick ?
 
Zuletzt bearbeitet von einem Moderator:
@gimiptv21
Here :
Sie müssen registriert sein, um Links zu sehen.

;
 
Zuletzt bearbeitet von einem Moderator:
gmiptv21 schrieb:
Ich habe diesen Patch mit caid 1830 max tv getestet und er funktioniert nicht
Erforderlicher Header-Modus: 0x00
findet ecm nicht
Zum Vergrößern anklicken....
find this line in patch ecmreq[ 9] = 0x04 and change it to this ecmreq[ 9] = 0x00 , compile oscam and max goes
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

Support nftables statt iptables verwenden
Antworten
1
Aufrufe
146
prisrak
C
Suche Suche Vediamo 5.01.01 mit Patch + CBF-Dateien für W204 (C250 US)
Antworten
1
Aufrufe
231
blazepueppa
T
oscam 11726 trunk patch für au client update von HD+ und 1817-1819 Karten im server mit cak7 patch von @leyla38
Antworten
4
Aufrufe
3K
leyla38
  • Angepinnt
Anleitung Fritzbox 6660 (und andere) flashen / recovern für Amateure
Antworten
2
Aufrufe
258
AKruppa
J
  • Artikel Artikel
PC & Internet EBAY-Anbieter von ungeeigneter Hardware für W11
Antworten
0
Aufrufe
214
juppeck
J
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…