Ich suche einen Patch für jede Linux- und CPU-Distribution.mit einem Patch für CAK7

[rumas84]

you have a problem with your config....
can you post your config without keys ?
;

post just: oscam.server ;
;

 

[gmiptv21]

Spoiler

[reader]
label =
description =
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1830
boxkey =
rsakey =
mod1 =
idird =
mod2 =
key3588 =
key3460 =
key3310 =
data50 =
mod50 =
nuid =
cwekey0 =
cak7_mode = 1
detect = cd
nagra_read = 1
mhz = 600
ident = 1830:000000,00AA80
group = 1,11,15
emmcache = 1,2,15,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
audisabled = 1

 

[rumas84]

Spoiler

#########################################
## reader configuration
###############################################
[readers]
label = MaxTV_1830
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1830
mod1 = xxxx
mod2 = xxxx
key3588 = xxxx
key3460 = xxxx
key3310 = xxxx
data50 = xxxx
mod50 = xxxx
idird = xxxx
ecmheader = 0
nuid = xxxx
cwekey = xxxx,xxxx,..........,xxxx
detect = cd
mhz = 600
cardmhz = 368
nagra_read = 1
detect_seca_nagra_tunneled_card= 2
ident = 1830:000000.00AA80.00AA81
groups = x
emmcache = 1,1,2,0
blockemm-unknown = 1
auprovid = 00AA80,00AA81

you don't need: boxkey && rsakey ;
with my oscam use cwekey = xxxx instead of cwekey0 = xxxx
;

 

[gmiptv21]

problem is in card mode
must bee run in special mode
with your oscam and config not do this
here is a log with your oscam and conf

Spoiler

• 2022/03/13 18:03:15 25E860D7 r (reader) maxtv [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 32 20 4D 65 72 52 32 36 4C
• 2022/03/13 18:03:15 25E860D7 r (reader) maxtv [mouse] Setting baudrate to 187500 bps
• 2022/03/13 18:03:15 25E860D7 r (reader) maxtv [mouse] card system not supported
• 2022/03/13 18:03:15 25E860D7 r (reader) maxtv [mouse] Normal mode failed, reverting to Deprecated Mode

 

[rumas84]

please, copy the keys one by one using web inf then save and restart oscam.
########
don't forget these two parameters are very important:
ecmheader = 0
detect_seca_nagra_tunneled_card= 2
;

 

[gmiptv21]

when add cwpk key oscam down , not working

Spoiler

• 2022/03/13 18:27:26 0ADD4A5B r (reader) maxtv [mouse] card detected
• 2022/03/13 18:27:27 0ADD4A5B r (reader) maxtv [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 32 20 4D 65 72 52 32 36 4C
• 2022/03/13 18:27:27 0ADD4A5B r (reader) maxtv [mouse] Setting baudrate to 187500 bps
• 2022/03/13 18:27:28 0ADD4A5B r (reader) maxtv [mouse] detect native nagra card
• 2022/03/13 18:27:30 0ADD4A5B r (reader) maxtv [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2022/03/13 18:27:31 0ADD4A5B r (reader) maxtv [mouse] T1 Resync command error, trying to reactivate!

this is log from working oscam

Spoiler

• 2022/03/13 18:28:29 15F371A0 r (reader) maxtv [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 38 32 20 52 65 76 52 32 36 1C
• 2022/03/13 18:28:29 15F371A0 r (reader) maxtv [mouse] Initial AES: 90 E6 79 13 DA C1 E2 B7 FB A1 6B C0 2A 13 54 66
• 2022/03/13 18:28:29 15F371A0 r (reader) maxtv [mouse] Setting baudrate to 187500 bps
• 2022/03/13 18:28:30 15F371A0 r (reader) maxtv [mouse] Rom revision: DNASP482 RevR26
• 2022/03/13 18:28:30 15F371A0 r (reader) maxtv [mouse] Card has DT05_00
• 2022/03/13 18:28:30 15F371A0 r (reader) maxtv [mouse] DT05_00 is correct
• 2022/03/13 18:28:30 15F371A0 r (reader) maxtv [mouse] Card has DT05_10
• 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] Card has DT05_50
• 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] Card has DT05_20
• 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] OTP CSC No. of keys: 00 01
• 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] OTA CSC No. of keys: 00 00
• 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] card needs FASTreinit after 35999 CMDs
• 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] DT05_10 is correct
• 2022/03/13 18:28:31 15F371A0 r (reader) maxtv [mouse] Card is starting in GLOBAL mode
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [mouse] New AES: F5 60 F0 32 42 18 53 E1 70 62 3F B1 D0 0D 51 9D
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [mouse] ready for requests
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [mouse] found card system nagra merlin
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] ROM: D N A S P 4 8 2
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] REV: R e v R 2 6
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] SER: ############
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] CAID: 1830
• 2022/03/13 18:28:32 15F371A0 r (reader) maxtv [nagra merlin] Prv.ID: 00 00 AA 80 (sysid)

 

[rumas84]

can you try this one ?
use the config above
thanks
;

 

[gmiptv21]

ok thanks will try

 

[rumas84]

I don't know why not working with you ?
because in other forum tested and worked .
just with my oscam the config not same like the others.
##
cak7_mode is replaced by detect_seca_nagra_tunneled_card .
detect_seca_nagra_tunneled_card =
0 - Merlin, Cayman Cards [ 1856, 1884(NC+), 186A(HD04),...]
1 - Enabled (default) Seca/Nagra Cards
2 - Cameleon, cak6.x Cards [ 1811, 1813, 1830(Maxtv), 1843(HD02), 1860(HD03),...]
;

 

[gmiptv21]

can you try this one ?
use the config above
thanks
;

with this working , great
how can i make send you private message ?
can you add me

 

[rumas84]

which version is working the first one from here: Ich suche einen Patch für jede Linux- und CPU-Distribution.mit einem Patch für CAK7 ?
...
#########
if you are in these forums: "linuxsat-support" or "streamboard" we can continue talking in private ;
..........

 

[gmiptv21]

• OSCam r11704-798

am on this forum "linusat-support"
whats your nick ?

 

[rumas84]

@gimiptv21
Here :

Sie müssen registriert sein, um Links zu sehen.

;

 

[gmiptv21]

am send you request

 

[bojanu]

Ich habe diesen Patch mit caid 1830 max tv getestet und er funktioniert nicht
Erforderlicher Header-Modus: 0x00
findet ecm nicht

find this line in patch ecmreq[ 9] = 0x04 and change it to this ecmreq[ 9] = 0x00 , compile oscam and max goes