hi,
ich habe folgendes problem:
homesharing funktioniert, nach extern jedoch nicht.
12000 port ist in der fritzbox offen.
dyndns steht auch im router drin.
bei der internen box steht auch die DYNDNS adresse in der C-line
hier meine cccam.cfg vom server:
wenn der EXTERNE seine CCCAM.CFG in seine box schiebt, sehe ich in der CCcam info, das er ACTIVE ist, aber nach 10sek ist er nur noch als CLIENT sichtbar. in den 10sek ACTIVE hat er aber auch kein bild.
sieht hier einer einen fehler?
WARUM GEHT ES INTERN, ABER NICHT EXTERN?
ich sehe ja in der cccam, das da der externe ist, jedoch halt nicht activiert????
danke
telte
ich habe folgendes problem:
homesharing funktioniert, nach extern jedoch nicht.
12000 port ist in der fritzbox offen.
dyndns steht auch im router drin.
bei der internen box steht auch die DYNDNS adresse in der C-line
hier meine cccam.cfg vom server:
F: intern intern
F: extern extern
N: 127.0.0.1 10110 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
hier die newcs:
-->
- <newCSconfig>
- <readers name="Card Readers">
- <device>
<name>multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>600</mhz>
- <!-- or 357
-->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10110</newcamd_port>
<priority>round</priority>
- <!-- hard is default
-->
- <sid>
- <allow>
- <!--
valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it.
-->
<id />
</allow>
- <deny>
- <!--
valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it.
-->
<id />
</deny>
</sid>
</device>
</readers>
- <radegastserver>
- <!--
valid value for enable are:
0,1 - Enable or Disable radegast server.
-->
<enabled>no</enabled>
- <!--
valid value for port are:
0,65535 - Which port to listen for incomming connections.
-->
<port>10001</port>
- <!--
valid value for allow are:
ALL - Not active yet.
-->
- <allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
- <cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
- <debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile />
<console_options />
<file_options />
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options />
<tcp_port>3001</tcp_port>
<tcp_options />
</debug>
- <newcamdserver>
<enabled>yes</enabled>
<name>bla</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile />
- <user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
</user>
- <user>
<name>User1</name>
<password>Pass1</password>
<au>on</au>
</user>
- <!-- Remove if you dont use reverse login
-->
- <user>
<name>User2</name>
<password>Pass2</password>
<hostname>localhost</hostname>
<port>12345</port>
<spider>yes</spider>
</user>
</newcamdserver>
</newCSconfig>
hier die cccam.cfg von extern:
C: DYNDNS ADRESSE 12000 extern extern
im browser steht bei der CCAM folgendes:
unter CLIENTS:
Connected clients: 2
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share |
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
|INTERN |xx.xxx.xxx.xxx |15336d 22:51:40|00d 00:00:01|161 (161)|0 (0)|2.1.4 |1702:000000:002b (ok) |
|EXTERN |xx.xxx.xx.xx |00d 00:00:42|00d 00:00:42|0 (0) |0 (0)|2.2.1 | |
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
|INTERN |local 1702:000000 161(161) |
|EXTERN | |
+---------+---------------------------------------+
aber ACTIVE ist nur der INTERNE
Connected clients: 2
1 ACTIVE CLIENT IN LAST 20 SECONDS
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share |
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
|INTERN |xx.xxx.xxx.xxx |15336d 22:52:09|00d 00:00:02|166 (166)|0 (0)|2.1.4 |1702:000000:002b (ok) |
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
|INTERN |local 1702:000000 166(166) |
|EXTERN | |
+---------+---------------------------------------+
unter SERVER:
Server connections: 1 +----------------------+------------+-------+--------+----------------+-------+-------------------------------+ | Host | Connected | Type | Version| NodeID | Cards | CAID/Idents | +----------------------+------------+-------+--------+----------------+-------+-------------------------------+ |127.0.0.1:10110 |00d 01:17:47|newcamd| | | 1 |local 1702:000000 675(675) | | | | | | | |remote 1702:000000 666(666) | +----------------------+------------+-------+--------+----------------+-------+-------------------------------+
F: extern extern
N: 127.0.0.1 10110 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
hier die newcs:
-->
- <newCSconfig>
- <readers name="Card Readers">
- <device>
<name>multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>600</mhz>
- <!-- or 357
-->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10110</newcamd_port>
<priority>round</priority>
- <!-- hard is default
-->
- <sid>
- <allow>
- <!--
valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it.
-->
<id />
</allow>
- <deny>
- <!--
valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it.
-->
<id />
</deny>
</sid>
</device>
</readers>
- <radegastserver>
- <!--
valid value for enable are:
0,1 - Enable or Disable radegast server.
-->
<enabled>no</enabled>
- <!--
valid value for port are:
0,65535 - Which port to listen for incomming connections.
-->
<port>10001</port>
- <!--
valid value for allow are:
ALL - Not active yet.
-->
- <allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
- <cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
- <debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile />
<console_options />
<file_options />
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options />
<tcp_port>3001</tcp_port>
<tcp_options />
</debug>
- <newcamdserver>
<enabled>yes</enabled>
<name>bla</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile />
- <user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
</user>
- <user>
<name>User1</name>
<password>Pass1</password>
<au>on</au>
</user>
- <!-- Remove if you dont use reverse login
-->
- <user>
<name>User2</name>
<password>Pass2</password>
<hostname>localhost</hostname>
<port>12345</port>
<spider>yes</spider>
</user>
</newcamdserver>
</newCSconfig>
hier die cccam.cfg von extern:
C: DYNDNS ADRESSE 12000 extern extern
im browser steht bei der CCAM folgendes:
unter CLIENTS:
Connected clients: 2
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share |
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
|INTERN |xx.xxx.xxx.xxx |15336d 22:51:40|00d 00:00:01|161 (161)|0 (0)|2.1.4 |1702:000000:002b (ok) |
|EXTERN |xx.xxx.xx.xx |00d 00:00:42|00d 00:00:42|0 (0) |0 (0)|2.2.1 | |
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
|INTERN |local 1702:000000 161(161) |
|EXTERN | |
+---------+---------------------------------------+
aber ACTIVE ist nur der INTERNE
Connected clients: 2
1 ACTIVE CLIENT IN LAST 20 SECONDS
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share |
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
|INTERN |xx.xxx.xxx.xxx |15336d 22:52:09|00d 00:00:02|166 (166)|0 (0)|2.1.4 |1702:000000:002b (ok) |
+---------+---------------+------------+------------+---------+-----+--------+----------------------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
|INTERN |local 1702:000000 166(166) |
|EXTERN | |
+---------+---------------------------------------+
unter SERVER:
Server connections: 1 +----------------------+------------+-------+--------+----------------+-------+-------------------------------+ | Host | Connected | Type | Version| NodeID | Cards | CAID/Idents | +----------------------+------------+-------+--------+----------------+-------+-------------------------------+ |127.0.0.1:10110 |00d 01:17:47|newcamd| | | 1 |local 1702:000000 675(675) | | | | | | | |remote 1702:000000 666(666) | +----------------------+------------+-------+--------+----------------+-------+-------------------------------+
sieht hier einer einen fehler?
WARUM GEHT ES INTERN, ABER NICHT EXTERN?
ich sehe ja in der cccam, das da der externe ist, jedoch halt nicht activiert????
danke
telte
Zuletzt bearbeitet von einem Moderator: