HIILFEEE: Bin total am Ende.

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Hallo ,

wie deaktiviere ich den Reader ???

Hier mein Aktueller Oscam.log nach 2 min helle.

Spoiler

-------------------------------------------------------------------------------

>> OSCam << cardserver started at Fri Feb 7 19:52:02 2014

-------------------------------------------------------------------------------

2014/02/07 19:52:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/07 19:52:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 4132

2014/02/07 19:52:02 0 s services reloaded: 0 services freed, 6 services loaded, rejected 0

2014/02/07 19:52:02 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/07 19:52:02 0 s signal handling initialized

2014/02/07 19:52:02 0 s 195 service-id's loaded in 1ms

2014/02/07 19:52:02 0 s monitor: initialized (fd=5, port=988)

2014/02/07 19:52:02 0 s newcamd: Bind request failed (Address already in use), waiting another 119 seconds

2014/02/07 19:52:02 0 s cccam: Bind request failed (Address already in use), waiting another 118 seconds

2014/02/07 19:52:02 0 s newcamd: Bind request failed (Address already in use), waiting another 59 seconds

2014/02/07 19:52:02 0 s cccam: Bind request failed (Address already in use), waiting another 58 seconds

2014/02/07 19:52:03 0 s newcamd: Bind request failed (Address already in use), waiting another 118 seconds

2014/02/07 19:52:03 0 s cccam: Bind request failed (Address already in use), waiting another 117 seconds

2014/02/07 19:52:03 0 s newcamd: Bind request failed (Address already in use), waiting another 58 seconds

2014/02/07 19:52:03 0 s cccam: Bind request failed (Address already in use), waiting another 57 seconds

2014/02/07 19:52:04 0 s newcamd: Bind request failed (Address already in use), waiting another 117 seconds

2014/02/07 19:52:04 0 s cccam: Bind request failed (Address already in use), waiting another 116 seconds

2014/02/07 19:52:04 0 s newcamd: Bind request failed (Address already in use), waiting another 57 seconds

2014/02/07 19:52:04 0 s cccam: Bind request failed (Address already in use), waiting another 56 seconds

2014/02/07 19:52:05 0 s newcamd: Bind request failed (Address already in use), waiting another 116 seconds

2014/02/07 19:52:05 0 s cccam: Bind request failed (Address already in use), waiting another 115 seconds

2014/02/07 19:52:05 0 s newcamd: Bind request failed (Address already in use), waiting another 56 seconds

2014/02/07 19:52:05 0 s cccam: Bind request failed (Address already in use), waiting another 55 seconds

2014/02/07 19:52:06 86EF6E0 r v14 [smargo] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 xx xx xx

2014/02/07 19:52:06 86EF6E0 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=16, N=2

2014/02/07 19:52:06 86EF6E0 r v14 [smargo] Calculated work ETU is 4.35 us reader mhz = 534

2014/02/07 19:52:06 0 s newcamd: Bind request failed (Address already in use), waiting another 115 seconds

2014/02/07 19:52:06 0 s cccam: Bind request failed (Address already in use), waiting another 114 seconds

2014/02/07 19:52:06 86EF6E0 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/07 19:52:06 0 s newcamd: Bind request failed (Address already in use), waiting another 55 seconds

2014/02/07 19:52:06 0 s cccam: Bind request failed (Address already in use), waiting another 54 seconds

2014/02/07 19:52:07 0 s newcamd: Bind request failed (Address already in use), waiting another 114 seconds

2014/02/07 19:52:07 0 s cccam: Bind request failed (Address already in use), waiting another 113 seconds

2014/02/07 19:52:07 0 s newcamd: Bind request failed (Address already in use), waiting another 54 seconds

2014/02/07 19:52:07 0 s cccam: Bind request failed (Address already in use), waiting another 53 seconds

2014/02/07 19:52:08 0 s newcamd: Bind request failed (Address already in use), waiting another 113 seconds

2014/02/07 19:52:08 0 s cccam: Bind request failed (Address already in use), waiting another 112 seconds

2014/02/07 19:52:08 86EF6E0 r v14 [smargo] card system not supported

2014/02/07 19:52:08 86EF6E0 r v14 [smargo] Normal mode failed, reverting to Deprecated Mode

2014/02/07 19:52:08 9EB46E0 r v14 [videoguard2] classD0 ins40: (-2) status not ok 1b c0

2014/02/07 19:52:08 9EB46E0 r v14 [videoguard2] The card is not answering correctly! Restarting reader for safety

2014/02/07 19:52:08 9EC88D8 c werner (098C&000000/0067/0204/98:0F842E32B870DDD615538B446F3Axxxx): not found (1066 ms) by v14 - Sky Nostalgie

2014/02/07 19:52:08 9EC88D8 c werner (098C&000000/0067/0204/98:0F842E32B870DDD615538B446F3Axxxx): rejected group (1 ms) - Sky Nostalgie (no matching reader)

2014/02/07 19:52:08 0 s newcamd: Bind request failed (Address already in use), waiting another 53 seconds

2014/02/07 19:52:08 0 s cccam: Bind request failed (Address already in use), waiting another 52 seconds

2014/02/07 19:52:09 0 s newcamd: Bind request failed (Address already in use), waiting another 112 seconds

2014/02/07 19:52:09 0 s cccam: Bind request failed (Address already in use), waiting another 111 seconds

2014/02/07 19:52:09 0 --- Skipped 3 duplicated log lines ---

2014/02/07 19:52:09 9EB46E0 r v14 [videoguard2] creating thread for device /dev/ttyUSB0

2014/02/07 19:52:09 9ECD848 r v14 [videoguard2] smargo init type is smargo

2014/02/07 19:52:09 9ECD848 r v14 [videoguard2] clocking for smartreader with smartreader protocol

2014/02/07 19:52:09 9ECD848 r v14 [videoguard2] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)

2014/02/07 19:52:09 9EC88D8 c werner (098C&000000/0067/0204/98:0F842E32B870DDD615538B446F3Axxxx): rejected group (1 ms) - Sky Nostalgie (no matching reader)

2014/02/07 19:52:09 0 s newcamd: Bind request failed (Address already in use), waiting another 52 seconds

2014/02/07 19:52:09 0 s cccam: Bind request failed (Address already in use), waiting another 51 seconds

2014/02/07 19:52:10 0 --- Skipped 2 duplicated log lines ---

2014/02/07 19:52:10 9ECD848 r v14 [videoguard2] card detected

2014/02/07 19:52:10 0 s newcamd: Bind request failed (Address already in use), waiting another 111 seconds

2014/02/07 19:52:10 0 s cccam: Bind request failed (Address already in use), waiting another 110 seconds

2014/02/07 19:52:10 0 s newcamd: Bind request failed (Address already in use), waiting another 51 seconds

2014/02/07 19:52:10 0 s cccam: Bind request failed (Address already in use), waiting another 50 seconds

2014/02/07 19:52:11 0 s newcamd: Bind request failed (Address already in use), waiting another 110 seconds

2014/02/07 19:52:11 0 s cccam: Bind request failed (Address already in use), waiting another 109 seconds

2014/02/07 19:52:11 0 s newcamd: Bind request failed (Address already in use), waiting another 50 seconds

2014/02/07 19:52:11 0 s cccam: Bind request failed (Address already in use), waiting another 49 seconds

2014/02/07 19:52:12 0 s newcamd: Bind request failed (Address already in use), waiting another 109 seconds

2014/02/07 19:52:12 0 s cccam: Bind request failed (Address already in use), waiting another 108 seconds

2014/02/07 19:52:12 0 s newcamd: Bind request failed (Address already in use), waiting another 49 seconds

2014/02/07 19:52:12 0 s cccam: Bind request failed (Address already in use), waiting another 48 seconds

2014/02/07 19:52:13 0 s newcamd: Bind request failed (Address already in use), waiting another 108 seconds

2014/02/07 19:52:13 0 s cccam: Bind request failed (Address already in use), waiting another 107 seconds

2014/02/07 19:52:13 0 s newcamd: Bind request failed (Address already in use), waiting another 48 seconds

2014/02/07 19:52:13 0 s cccam: Bind request failed (Address already in use), waiting another 47 seconds

2014/02/07 19:52:14 0 s newcamd: Bind request failed (Address already in use), waiting another 107 seconds

2014/02/07 19:52:14 0 s cccam: Bind request failed (Address already in use), waiting another 106 seconds

2014/02/07 19:52:14 0 s newcamd: Bind request failed (Address already in use), waiting another 47 seconds

2014/02/07 19:52:14 9ECD848 r v14 [smargo] ATR: 3F FD 15 02 80 41 0A FF 50 F0 50 31

2014/02/07 19:52:14 0 s cccam: Bind request failed (Address already in use), waiting another 46 seconds

2014/02/07 19:52:15 0 s newcamd: Bind request failed (Address already in use), waiting another 106 seconds

2014/02/07 19:52:15 0 s cccam: Bind request failed (Address already in use), waiting another 105 seconds

2014/02/07 19:52:15 0 s newcamd: Bind request failed (Address already in use), waiting another 46 seconds

2014/02/07 19:52:15 0 s cccam: Bind request failed (Address already in use), waiting another 45 seconds

2014/02/07 19:52:16 0 s newcamd: Bind request failed (Address already in use), waiting another 105 seconds

2014/02/07 19:52:16 0 s cccam: Bind request failed (Address already in use), waiting another 104 seconds

2014/02/07 19:52:16 9ECD848 r v14 [smargo] Init card protocol T1, FI=1, F=372, D=16, N=128

2014/02/07 19:52:16 9ECD848 r v14 [smargo] Calculated work ETU is 4.35 us reader mhz = 534

2014/02/07 19:52:16 0 s newcamd: Bind request failed (Address already in use), waiting another 45 seconds

2014/02/07 19:52:16 86EF6E0 r v14 [smargo] Error activating card.

2014/02/07 19:52:16 9ECD848 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/07 19:52:16 0 s cccam: Bind request failed (Address already in use), waiting another 44 seconds

2014/02/07 19:52:17 0 s newcamd: Bind request failed (Address already in use), waiting another 104 seconds

2014/02/07 19:52:17 0 s cccam: Bind request failed (Address already in use), waiting another 103 seconds

2014/02/07 19:52:17 0 s newcamd: Bind request failed (Address already in use), waiting another 44 seconds

2014/02/07 19:52:17 9ECD848 r v14 [smargo] card system not supported

2014/02/07 19:52:17 9ECD848 r v14 [smargo] Normal mode failed, reverting to Deprecated Mode

2014/02/07 19:52:17 0 s cccam: Bind request failed (Address already in use), waiting another 43 seconds

2014/02/07 19:52:18 0 s newcamd: Bind request failed (Address already in use), waiting another 103 seconds

2014/02/07 19:52:18 0 s cccam: Bind request failed (Address already in use), waiting another 102 seconds

2014/02/07 19:52:18 0 s newcamd: Bind request failed (Address already in use), waiting another 43 seconds

2014/02/07 19:52:18 0 s cccam: Bind request failed (Address already in use), waiting another 42 seconds

2014/02/07 19:52:19 0 s newcamd: Bind request failed (Address already in use), waiting another 102 seconds

2014/02/07 19:52:19 0 s cccam: Bind request failed (Address already in use), waiting another 101 seconds

2014/02/07 19:52:19 0 s newcamd: Bind request failed (Address already in use), waiting another 42 seconds

2014/02/07 19:52:19 0 s cccam: Bind request failed (Address already in use), waiting another 41 seconds

2014/02/07 19:52:20 0 s newcamd: Bind request failed (Address already in use), waiting another 101 seconds

2014/02/07 19:52:20 0 s cccam: Bind request failed (Address already in use), waiting another 100 seconds

2014/02/07 19:52:20 0 s newcamd: Bind request failed (Address already in use), waiting another 41 seconds

2014/02/07 19:52:20 0 s cccam: Bind request failed (Address already in use), waiting another 40 seconds

2014/02/07 19:52:21 0 s newcamd: Bind request failed (Address already in use), waiting another 100 seconds

2014/02/07 19:52:21 0 s cccam: Bind request failed (Address already in use), waiting another 99 seconds

2014/02/07 19:52:21 0 s newcamd: Bind request failed (Address already in use), waiting another 40 seconds

2014/02/07 19:52:21 0 s cccam: Bind request failed (Address already in use), waiting another 39 seconds

2014/02/07 19:52:22 0 s newcamd: Bind request failed (Address already in use), waiting another 99 seconds

2014/02/07 19:52:22 0 s cccam: Bind request failed (Address already in use), waiting another 98 seconds

2014/02/07 19:52:22 0 s newcamd: Bind request failed (Address already in use), waiting another 39 seconds

2014/02/07 19:52:22 0 s cccam: Bind request failed (Address already in use), waiting another 38 seconds

2014/02/07 19:52:23 0 s newcamd: Bind request failed (Address already in use), waiting another 98 seconds

2014/02/07 19:52:23 0 s cccam: Bind request failed (Address already in use), waiting another 97 seconds

2014/02/07 19:52:23 0 s newcamd: Bind request failed (Address already in use), waiting another 38 seconds

2014/02/07 19:52:23 0 s cccam: Bind request failed (Address already in use), waiting another 37 seconds

2014/02/07 19:52:24 0 s newcamd: Bind request failed (Address already in use), waiting another 97 seconds

2014/02/07 19:52:24 0 s cccam: Bind request failed (Address already in use), waiting another 96 seconds

2014/02/07 19:52:24 0 s newcamd: Bind request failed (Address already in use), waiting another 37 seconds

2014/02/07 19:52:24 0 s cccam: Bind request failed (Address already in use), waiting another 36 seconds

2014/02/07 19:52:25 0 s newcamd: Bind request failed (Address already in use), waiting another 96 seconds

2014/02/07 19:52:25 0 s cccam: Bind request failed (Address already in use), waiting another 95 seconds

2014/02/07 19:52:25 9ECD848 r v14 [smargo] ATR: 3F FD 15 40 E0 41 69 FF 00 00 31

2014/02/07 19:52:25 9ECD848 r v14 [smargo] Init card protocol T1, FI=1, F=372, D=16, N=224

2014/02/07 19:52:25 9ECD848 r v14 [smargo] Calculated work ETU is 69.66 us reader mhz = 534

2014/02/07 19:52:25 0 s newcamd: Bind request failed (Address already in use), waiting another 36 seconds

2014/02/07 19:52:25 0 s cccam: Bind request failed (Address already in use), waiting another 35 seconds

2014/02/07 19:52:25 9ECD848 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/07 19:52:26 0 s newcamd: Bind request failed (Address already in use), waiting another 95 seconds

2014/02/07 19:52:26 0 s cccam: Bind request failed (Address already in use), waiting another 94 seconds

2014/02/07 19:52:26 0 s newcamd: Bind request failed (Address already in use), waiting another 35 seconds

2014/02/07 19:52:26 0 s cccam: Bind request failed (Address already in use), waiting another 34 seconds

2014/02/07 19:52:26 9ECD848 r v14 [smargo] card system not supported

2014/02/07 19:52:26 9ECD848 r v14 [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2014/02/07 19:52:26 9ECD848 r v14 [smargo] card initializing error

2014/02/07 19:52:27 0 s newcamd: Bind request failed (Address already in use), waiting another 94 seconds

2014/02/07 19:52:27 0 s cccam: Bind request failed (Address already in use), waiting another 93 seconds

2014/02/07 19:52:27 0 s newcamd: Bind request failed (Address already in use), waiting another 34 seconds

2014/02/07 19:52:27 0 s cccam: Bind request failed (Address already in use), waiting another 33 seconds

2014/02/07 19:52:28 0 s newcamd: Bind request failed (Address already in use), waiting another 93 seconds

2014/02/07 19:52:28 0 s cccam: Bind request failed (Address already in use), waiting another 92 seconds

2014/02/07 19:52:28 0 s newcamd: Bind request failed (Address already in use), waiting another 33 seconds

2014/02/07 19:52:28 0 s cccam: Bind request failed (Address already in use), waiting another 32 seconds

2014/02/07 19:52:29 0 s newcamd: Bind request failed (Address already in use), waiting another 92 seconds

2014/02/07 19:52:29 0 s cccam: Bind request failed (Address already in use), waiting another 91 seconds

2014/02/07 19:52:29 0 s newcamd: Bind request failed (Address already in use), waiting another 32 seconds

2014/02/07 19:52:29 0 s cccam: Bind request failed (Address already in use), waiting another 31 seconds

2014/02/07 19:52:30 0 s newcamd: Bind request failed (Address already in use), waiting another 91 seconds

2014/02/07 19:52:30 0 s cccam: Bind request failed (Address already in use), waiting another 90 seconds

2014/02/07 19:52:30 0 --- Skipped 1 duplicated log lines ---

2014/02/07 19:52:30 86EF6E0 r v14 [smargo] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/02/07 19:52:30 86EF6E0 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=16, N=2

2014/02/07 19:52:30 86EF6E0 r v14 [smargo] Calculated work ETU is 69.66 us reader mhz = 534

2014/02/07 19:52:30 0 s newcamd: Bind request failed (Address already in use), waiting another 31 seconds

2014/02/07 19:52:30 86EF6E0 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/07 19:52:30 0 s cccam: Bind request failed (Address already in use), waiting another 30 seconds

2014/02/07 19:52:31 0 s newcamd: Bind request failed (Address already in use), waiting another 90 seconds

2014/02/07 19:52:31 0 s cccam: Bind request failed (Address already in use), waiting another 89 seconds

2014/02/07 19:52:31 0 s newcamd: Bind request failed (Address already in use), waiting another 30 seconds

2014/02/07 19:52:31 0 s cccam: Bind request failed (Address already in use), waiting another 29 seconds

2014/02/07 19:52:32 0 s newcamd: Bind request failed (Address already in use), waiting another 89 seconds

2014/02/07 19:52:32 0 s cccam: Bind request failed (Address already in use), waiting another 88 seconds

2014/02/07 19:52:32 0 s newcamd: Bind request failed (Address already in use), waiting another 29 seconds

2014/02/07 19:52:32 0 s cccam: Bind request failed (Address already in use), waiting another 28 seconds

2014/02/07 19:52:33 0 s newcamd: Bind request failed (Address already in use), waiting another 88 seconds

2014/02/07 19:52:33 0 s cccam: Bind request failed (Address already in use), waiting another 87 seconds

2014/02/07 19:52:33 0 s newcamd: Bind request failed (Address already in use), waiting another 28 seconds

Danke für jede weitere Hilfe.

Übrigens in mein WI komme ich auch nicht mehr rein, hat genau einmal funktioniert, dann klickte ich nur irgendwo rechts oben auf RESET und seitdem
kommt die Fehlermeldung , Seite kann nicht angezeigt werden...

Gruß

Werner
kommt immer nur ...

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

zeig mal die oscam.conf. bzw da stehen die Zugangsdaten fürs wi drin.

MfG

 

[Pilot]

AW: HIILFEEE: Bin total am Ende.

Übrigens in mein WI komme ich auch nicht mehr rein, hat genau einmal funktioniert, dann klickte ich nur irgendwo rechts oben auf RESET und seitdem
kommt die Fehlermeldung , Seite kann nicht angezeigt werden...

hatte ich bei einem image auch.
Da half nur oscam direkt am Receiver neu zu starten.


Mlg Pilot

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Hallo ,

kann das sein das meine Oscam Verzeichnisse auf meinem Igel in den falschen Ordnerl liegt.
> root , usr , local , etc ... hier sind oscam.conf , .user , .Server , .Services ,.srvid .

log oscam.conf

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9450

# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]

logfile = /var/log/oscam.log

usrfile = /var/log/oscam/oscamuser.log

nice = -1

maxlogsize = 200

preferlocalcards = 1


[cache]


[newcamd]

#port = 12xxx@1702:000000

#serverip = 192.168.2.xxx

#key = 0102030405060708091011121314


　

[dvbapi]

#enabled = 1

#au = 1

#decodeforever = 1

#user = werner


　

　

　

[cccam]

port = 1xx

serverip = 192.168.2.xxx

nodeid = 51A05A22103313E4

version = 2.3.0

reshare = 1

forward_origin_card = 1


[monitor]

port = 988

aulow = 120

monlevel = 4

hideclient_to = 15


[webif]

httpport = 1xx

httpcss = /etc/config/oscam/style5.css

httpuser = rxxx

httppwd = 1sxxxxxx

httphelplang = de

httprefresh = 10

httpallowed = 127.0.0.1,192.168.2.100-192.168.255.255

aulow = 120

hideclient_to = 15

... Aktuell kommt folgende Fehlermeldung im Oscam.log

Spoiler

014/02/07 22:13:59 0 s cccam: Bind request failed (Address already in use), waiting another 2 seconds


2014/02/07 22:14:00 0 s cccam: Bind request failed (Address already in use), waiting another 1 seconds


2014/02/07 22:14:01 0 s cccam: Bind request failed (Address already in use), giving up


2014/02/07 22:14:01 0 s v14 [smargo] creating thread for device /dev/ttyUSB0


2014/02/07 22:14:01 0 s loadbalancer: can't read from file /tmp/.oscam/stat


2014/02/07 22:14:01 0 s waiting for local card init


2014/02/07 22:14:01 87DAD98 r v14 [smargo] smargo init type is smargo


2014/02/07 22:14:01 87DCE98 h webif: decompressed 67795 bytes back into 191100 bytes


2014/02/07 22:14:01 87DCE98 h HTTP Server couldn't bind on port 101 (errno=98 Address already in use). Not starting HTTP!


2014/02/07 22:14:01 87DAD98 r v14 [smargo] clocking for smartreader with smartreader protocol


2014/02/07 22:14:01 87DAD98 r v14 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)


2014/02/07 22:14:02 87DAD98 r v14 [smargo] card detected


2014/02/07 22:14:11 87DAD98 r v14 [smargo] Error activating card.


2014/02/07 22:14:18 87DAD98 r v14 [smargo] ATR: 3F 25 40 E0 02 FF F0 50


2014/02/07 22:14:18 87DAD98 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0


2014/02/07 22:14:18 87DAD98 r v14 [smargo] Calculated work ETU is 69.66 us reader mhz = 534


2014/02/07 22:14:19 87DAD98 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)


2014/02/07 22:14:20 87DAD98 r v14 [smargo] card system not supported


2014/02/07 22:14:20 87DAD98 r v14 [smargo] Normal mode failed, reverting to Deprecated Mode


2014/02/07 22:14:22 87DAD98 r v14 [smargo] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03


2014/02/07 22:14:22 87DAD98 r v14 [smargo] Init card protocol T0, FI=1, F=372, D=16, N=2


2014/02/07 22:14:22 87DAD98 r v14 [smargo] Calculated work ETU is 69.66 us reader mhz = 534


2014/02/07 22:14:22 87DAD98 r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)


2014/02/07 22:14:25 87DAD98 r v14 [smargo] card system not supported


2014/02/07 22:14:25 87DAD98 r v14 [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1


2014/02/07 22:14:25 87DAD98 r v14 [smargo] card initializing error


2014/02/07 22:14:26 0 s init for all local cards done


2014/02/07 22:14:26 0 s anti cascading disabled

Gruß

Werner

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

httpport = 1xx

# httpuser = rxxx

# httppwd = 1sxxxxxx

Ändere mal die oscam.conf [webif] so, gib Deine IPdes Servers ein :1xx dann sollte das wenif von oscam starten, sofern oscam läuft.
Mit welchm Programm greifst Du z.Z. auf die Dateien zu?


httpcss = /etc/config/oscam/style5.css - das gehört nicht zwischen diem Zugangdaten, ist aber nur ein Schönheitsfehler.

MfG

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Hallo ,

geändert , kommt aber immer noch die Meldung .

Momentan greif ich über WinSCP zu .

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

Also das heist, Du bist nicht im oscamwebif?
Mit WinSCP kann es Probleme geben, da es nicht Linuxkonform ist. Ich mach alles über Filezilla und Notpad++.

MfG
Hast Du IPC? Ist wesendlich einfacher.
https://www.digital-eliteboard.com/showthread.php?224070-IPC-Was-ist-das

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Hallo,

also WebIf kann ich doch zugreifen, sieht aber von der Oberfläche ganz anders aus wie beim allerersten mal.
Was meinst du mit, kann es Probleme geben, merke ich das wenn was nicht funktioniert ?

Hat aber hoffentlich nichts mit den zu tun das es bei mir 2 min helle ist und dann dunkel bis ich den Igel neuboote, oder ?



Gruß

Werner

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

Desshalb verstehe ich nicht - WinSCP -, die Konfiguration machst Du doch übers if.

MfG

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

alle Änderungen die ich zb. in der Oscam.conf , user , Server , ändere , Konfiguriere ich über WinSCP.

Nicht gut ?

 

[4gx35]

AW: HIILFEEE: Bin total am Ende.

für newbies ist eigentlich nur das oscam webif sinnvoll,
dann kopierst du wenigstens keine alten parameter, die es nicht mehr gibt,
und kopierfehler gibt es dann weniger, aber bitte nicht dann einfach unter files kopieren

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

Warum machst Du das nicht im oscam WebIf?
Geh auf Files, dann hast Du die einzelnen Dateien. Da kannst Du sehr übersichtlich editieren (copie/paste) und brachst nicht immer hin und her switchen.
SAVE und Restart nicht vergessen, das die Änderungen wirksam werden!

MfG

aber bitte nicht dann einfach unter files kopieren

Wieso nicht? Das mach ich immer so?

 

[4gx35]

AW: HIILFEEE: Bin total am Ende.

da stand für newbies und auch die erklärung,
unter files findest du beispielsweide keine hinweise für reader mhz usw. sowie hilfen vom oscam wiki
oft werden auch falsche parameter bezeichnungen kopiert, services bezeichnungen usw.

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Wollt euch gerade meine Oberfläche zeigen (Webif), denn ich finde hier keinen Option "files" .

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

STATU CONFIGURARION READER USERS SERVICES FILES .......

Oben in der Kopfzeile.

Geh mal mit Putty auf den Sever und gib o compile ein. Compiliere eine andere Version z.B 9213. dann sollte der Kopf ordendlich angezeigt werden.
Geh mal davon aus, das Du IPC hast.
MfG