HIILFEEE: Bin total am Ende.

[supertreki]

AW: HIILFEEE: Bin total am Ende.

ok, Dateien angelegt :Reader in Oscam.Server und Account in oscam.user

..müssen die Rechte der Dateien noch geändert werden ?

 

[bombadil]

AW: HIILFEEE: Bin total am Ende.

Hi,

die Dateien brauchen 0644.

Grüße
Bombadil

 

[supertreki]

ok, aktuelles oscam.log

Spoiler

-------------------------------------------------------------------------------

>> OSCam << cardserver log switched at Sun Feb 2 19:02:08 2014

-------------------------------------------------------------------------------

2014/02/02 19:02:08 0 s readerdb 0 readers freed

2014/02/02 19:02:08 0 s cardserver down

2014/02/02 19:02:08 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)


-------------------------------------------------------------------------------

>> OSCam << cardserver started at Sun Feb 2 19:03:02 2014

-------------------------------------------------------------------------------

2014/02/02 19:03:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/02 19:03:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2687

2014/02/02 19:03:02 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/02 19:03:02 0 s signal handling initialized

2014/02/02 19:03:02 0 s monitor: initialized (fd=5, port=988)

2014/02/02 19:03:02 0 s newcamd: initialized (fd=6, port=13001, ip=192.168.2.112)

2014/02/02 19:03:02 0 s -> CAID: 1702 PROVID: 000000

2014/02/02 19:03:02 0 s cccam: initialized (fd=7, port=12345)

2014/02/02 19:03:02 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0

2014/02/02 19:03:02 0 s loadbalancer: can't read from file /tmp/.oscam/stat

2014/02/02 19:03:02 0 s waiting for local card init

2014/02/02 19:03:02 9F423D8 h webif: decompressed 67795 bytes back into 191100 bytes

2014/02/02 19:03:02 9F423D8 h HTTP Server running. ip=0.0.0.0 port=101

2014/02/02 19:03:02 9F406E0 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2014/02/02 19:03:03 9F406E0 r skyv14 [mouse] card detected

2014/02/02 19:03:05 9F406E0 r skyv14 [mouse] ATR: 3F 40 FF

2014/02/02 19:03:07 9F406E0 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=255

2014/02/02 19:03:07 9F406E0 r skyv14 [mouse] Setting baudrate to 9600 bps

2014/02/02 19:03:07 9F406E0 r skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357

2014/02/02 19:03:07 9F406E0 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2014/02/02 19:03:08 9F406E0 r skyv14 [mouse] ATR_len=3 but ATR is unknown: 3F 40 FF

2014/02/02 19:03:08 9F406E0 r skyv14 [mouse] card system not supported

2014/02/02 19:03:08 9F406E0 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode

2014/02/02 19:03:10 9F406E0 r skyv14 [mouse] ATR: 3F 40 03

2014/02/02 19:03:10 9F406E0 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3

2014/02/02 19:03:10 9F406E0 r skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357

2014/02/02 19:03:10 9F406E0 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2014/02/02 19:03:11 9F406E0 r skyv14 [mouse] ATR_len=3 but ATR is unknown: 3F 40 03

2014/02/02 19:03:11 9F406E0 r skyv14 [mouse] card system not supported

2014/02/02 19:03:11 9F406E0 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2014/02/02 19:03:11 9F406E0 r skyv14 [mouse] card initializing error

2014/02/02 19:03:12 0 s init for all local cards done

2014/02/02 19:03:12 0 s anti cascading disabled

hab mal den Server rebootet ...

Spoiler

> OSCam << cardserver started at Sun Feb 2 19:08:03 2014

-------------------------------------------------------------------------------

2014/02/02 19:08:03 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/02 19:08:03 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2695

2014/02/02 19:08:03 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/02 19:08:03 0 s signal handling initialized

2014/02/02 19:08:03 0 s monitor: initialized (fd=5, port=988)

2014/02/02 19:08:03 0 s newcamd: initialized (fd=6, port=13001, ip=192.168.2.112)

2014/02/02 19:08:03 0 s -> CAID: 1702 PROVID: 000000

2014/02/02 19:08:03 0 s cccam: initialized (fd=7, port=12345)

2014/02/02 19:08:03 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0

2014/02/02 19:08:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat

2014/02/02 19:08:03 0 s waiting for local card init

2014/02/02 19:08:03 831B3D8 h webif: decompressed 67795 bytes back into 191100 bytes

2014/02/02 19:08:03 831B3D8 h HTTP Server running. ip=0.0.0.0 port=101

2014/02/02 19:08:03 83196E0 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2014/02/02 19:08:04 83196E0 r skyv14 [mouse] card detected

2014/02/02 19:08:06 83196E0 r skyv14 [mouse] ATR: 40 03 40 37 5B

2014/02/02 19:08:06 83196E0 r skyv14 [mouse] ERROR: Could not read reader->convention

2014/02/02 19:08:06 83196E0 r skyv14 [mouse] Error activating card.

2014/02/02 19:08:09 83196E0 r skyv14 [mouse] ATR: 40 03 40 37 5B

2014/02/02 19:08:09 83196E0 r skyv14 [mouse] ERROR: Could not read reader->convention

2014/02/02 19:08:09 83196E0 r skyv14 [mouse] Error activating card.

2014/02/02 19:08:12 83196E0 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/02/02 19:08:12 83196E0 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/02/02 19:08:12 83196E0 r skyv14 [mouse] Setting baudrate to 38400 bps

2014/02/02 19:08:12 83196E0 r skyv14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357

2014/02/02 19:08:12 83196E0 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2014/02/02 19:08:16 83196E0 r skyv14 [mouse] card system not supported

2014/02/02 19:08:16 83196E0 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode

2014/02/02 19:08:19 83196E0 r skyv14 [mouse] ATR: 3F FD 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50

2014/02/02 19:08:19 83196E0 r skyv14 [mouse] Warning: D=0 is invalid, forcing D=1

2014/02/02 19:08:19 83196E0 r skyv14 [mouse] Init card protocol T5, FI=3, F=744, D=1, N=19

2014/02/02 19:08:19 83196E0 r skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357

2014/02/02 19:08:19 83196E0 r skyv14 [mouse] ERROR: Parse_ATR returned error

2014/02/02 19:08:19 83196E0 r skyv14 [mouse] Error activating card.

2014/02/02 19:08:21 83196E0 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/02/02 19:08:21 83196E0 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/02/02 19:08:21 83196E0 r skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357

2014/02/02 19:08:22 83196E0 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2014/02/02 19:08:26 83196E0 r skyv14 [mouse] card system not supported

2014/02/02 19:08:26 83196E0 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2014/02/02 19:08:26 83196E0 r skyv14 [mouse] card initializing error

2014/02/02 19:08:26 0 s init for all local cards done

2014/02/02 19:08:26 0 s anti cascading disabled


-------------------------------------------------------------------------------

>> OSCam << cardserver started at Sun Feb 2 19:09:02 2014

-------------------------------------------------------------------------------

2014/02/02 19:09:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/02 19:09:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3069

2014/02/02 19:09:02 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/02 19:09:02 0 s signal handling initialized

2014/02/02 19:09:02 0 s monitor: initialized (fd=5, port=988)

2014/02/02 19:09:02 0 s newcamd: Bind request failed (Address already in use), waiting another 119 seconds

2014/02/02 19:09:03 0 s newcamd: Bind request failed (Address already in use), waiting another 118 seconds

2014/02/02 19:09:04 0 s newcamd: Bind request failed (Address already in use), waiting another 117 seconds

2014/02/02 19:09:05 0 s newcamd: Bind request failed (Address already in use), waiting another 116 seconds

2014/02/02 19:09:06 0 s newcamd: Bind request failed (Address already in use), waiting another 115 seconds

2014/02/02 19:09:07 0 s newcamd: Bind request failed (Address already in use), waiting another 114 seconds

2014/02/02 19:09:08 0 s newcamd: Bind request failed (Address already in use), waiting another 113 seconds

2014/02/02 19:09:09 0 s newcamd: Bind request failed (Address already in use), waiting another 112 seconds

2014/02/02 19:09:10 0 s newcamd: Bind request failed (Address already in use), waiting another 111 seconds

2014/02/02 19:09:11 0 s newcamd: Bind request failed (Address already in use), waiting another 110 seconds

2014/02/02 19:09:12 0 s newcamd: Bind request failed (Address already in use), waiting another 109 seconds

2014/02/02 19:09:13 0 s newcamd: Bind request failed (Address already in use), waiting another 108 seconds

2014/02/02 19:09:14 0 s newcamd: Bind request failed (Address already in use), waiting another 107 seconds

2014/02/02 19:09:15 0 s newcamd: Bind request failed (Address already in use), waiting another 106 seconds

2014/02/02 19:09:16 0 s newcamd: Bind request failed (Address already in use), waiting another 105 seconds

2014/02/02 19:09:17 0 s newcamd: Bind request failed (Address already in use), waiting another 104 seconds

2014/02/02 19:09:18 0 s newcamd: Bind request failed (Address already in use), waiting another 103 seconds

2014/02/02 19:09:19 0 s newcamd: Bind request failed (Address already in use), waiting another 102 seconds

2014/02/02 19:09:20 0 s newcamd: Bind request failed (Address already in use), waiting another 101 seconds

2014/02/02 19:09:21 0 s newcamd: Bind request failed (Address already in use), waiting another 100 seconds

2014/02/02 19:09:22 0 s newcamd: Bind request failed (Address already in use), waiting another 99 seconds

2014/02/02 19:09:23 0 s newcamd: Bind request failed (Address already in use), waiting another 98 seconds

2014/02/02 19:09:24 0 s newcamd: Bind request failed (Address already in use), waiting another 97 seconds

2014/02/02 19:09:25 0 s newcamd: Bind request failed (Address already in use), waiting another 96 seconds

2014/02/02 19:09:26 0 s newcamd: Bind request failed (Address already in use), waiting another 95 seconds

2014/02/02 19:09:27 0 s newcamd: Bind request failed (Address already in use), waiting another 94 seconds

2014/02/02 19:09:28 0 s newcamd: Bind request failed (Address already in use), waiting another 93 seconds

2014/02/02 19:09:29 0 s newcamd: Bind request failed (Address already in use), waiting another 92 seconds

2014/02/02 19:09:30 0 s newcamd: Bind request failed (Address already in use), waiting another 91 seconds

2014/02/02 19:09:31 0 s newcamd: Bind request failed (Address already in use), waiting another 90 seconds

2014/02/02 19:09:32 0 s newcamd: Bind request failed (Address already in use), waiting another 89 seconds

2014/02/02 19:09:33 0 s newcamd: Bind request failed (Address already in use), waiting another 88 seconds

2014/02/02 19:09:34 0 s newcamd: Bind request failed (Address already in use), waiting another 87 seconds

Sie müssen registriert sein, um Bilder zu sehen

 

[SevenEagle]

AW: HIILFEEE: Bin total am Ende.

Abgesehen davon das der v2 reader eine Katastrophe darstellt. Würde ich ihn definitiv nicht im Mouse Protokoll starten. Versuche es zunächst mal mit smargo. Dann könntest du deine Device Einstellungen erst einmal so stehen lassen.

Protocol = smargo

Wenn das nicht klappt smartreader Protokoll versuchen (würde ich auch jederzeit bevorzugen) da sind aber die Device Einstellungen dann anders.

Gesendet von meinem XT1032 mit Tapatalk

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

ok, wird getestet.

Gruß

Werner

 

[bombadil]

AW: HIILFEEE: Bin total am Ende.

Moin,


ich denke mal, du hast das blaue Elend (Smargo) nicht passend zur Config eingestellt.

Grüße
Bombadil

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

Zeig mal die config-Dateien, am besten in einzelnen Spoilern. Das macht die Sache übersichtlicher!

MfG

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

ok, kleinen Moment. ...

hier aktuelles log ..

Spoiler

------------------------------------------------------------------------------

>> OSCam << cardserver log switched at Sun Feb 2 19:15:36 2014

-------------------------------------------------------------------------------

2014/02/02 19:15:36 0 s skyv14 [mouse] Killing reader

2014/02/02 19:15:36 0 s userdb 2 accounts freed

2014/02/02 19:15:36 0 s readerdb 1 readers freed

2014/02/02 19:15:36 0 s cardserver down

2014/02/02 19:15:36 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)


-------------------------------------------------------------------------------

>> OSCam << cardserver started at Sun Feb 2 19:17:02 2014

-------------------------------------------------------------------------------

2014/02/02 19:17:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9450 (i486-linux-gnu)

2014/02/02 19:17:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2739

2014/02/02 19:17:02 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled

2014/02/02 19:17:02 0 s signal handling initialized

2014/02/02 19:17:02 0 s monitor: initialized (fd=5, port=988)

2014/02/02 19:17:02 0 s newcamd: initialized (fd=6, port=13001, ip=192.168.2.112)

2014/02/02 19:17:02 0 s -> CAID: 1702 PROVID: 000000

2014/02/02 19:17:02 0 s cccam: initialized (fd=7, port=12345)

2014/02/02 19:17:02 0 s skyv14 [smargo] creating thread for device /dev/ttyUSB0

2014/02/02 19:17:02 0 s loadbalancer: can't read from file /tmp/.oscam/stat

2014/02/02 19:17:02 0 s waiting for local card init

2014/02/02 19:17:02 94E56E0 r skyv14 [smargo] smargo init type is smargo

2014/02/02 19:17:02 94E73D8 h webif: decompressed 67795 bytes back into 191100 bytes

2014/02/02 19:17:02 94E73D8 h HTTP Server running. ip=0.0.0.0 port=101

2014/02/02 19:17:02 94E56E0 r skyv14 [smargo] clocking for smartreader with smartreader protocol

2014/02/02 19:17:02 94E56E0 r skyv14 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)

2014/02/02 19:17:03 94E56E0 r skyv14 [smargo] card detected

2014/02/02 19:17:07 94E56E0 r skyv14 [smargo] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/02/02 19:17:07 94E56E0 r skyv14 [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/02/02 19:17:07 94E56E0 r skyv14 [smargo] Calculated work ETU is 17.42 us reader mhz = 534

2014/02/02 19:17:08 94E56E0 r skyv14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/02 19:17:09 94E56E0 r skyv14 [smargo] Card type: P1TV

2014/02/02 19:17:09 94E56E0 r skyv14 [smargo] Rom version: 20AA

2014/02/02 19:17:10 94E56E0 r skyv14 [smargo] classD0 ins36: encrypted - can't parse

2014/02/02 19:17:10 94E56E0 r skyv14 [smargo] no boxID available

2014/02/02 19:17:10 94E56E0 r skyv14 [smargo] card system not supported

2014/02/02 19:17:10 94E56E0 r skyv14 [smargo] Normal mode failed, reverting to Deprecated Mode

2014/02/02 19:17:14 94E56E0 r skyv14 [smargo] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/02/02 19:17:14 94E56E0 r skyv14 [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/02/02 19:17:14 94E56E0 r skyv14 [smargo] Calculated work ETU is 69.66 us reader mhz = 534

2014/02/02 19:17:14 94E56E0 r skyv14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

2014/02/02 19:17:17 94E56E0 r skyv14 [smargo] card system not supported

2014/02/02 19:17:17 94E56E0 r skyv14 [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2014/02/02 19:17:17 94E56E0 r skyv14 [smargo] card initializing error

2014/02/02 19:17:18 0 s init for all local cards done

2014/02/02 19:17:18 0 s anti cascading disabled

Gruß

Werner

 

[SevenEagle]

AW: HIILFEEE: Bin total am Ende.

Ist die Karte aktiviert?

Setz mal

MHz = 480

Und Cardmhz komplett raus


Gesendet von meinem XT1032 mit Tapatalk

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

oscam. conf

Spoiler

[global]

logfile = /var/log/oscam.log

maxlogsize = 200

nice = -1

preferlocalcards = 1

fallbacktimeout = 2500


　

　

[newcamd]

Key = 0102030405060708091011121314

serverip = ich denk mal die des igel Servers, oder ?

Port =13001@1702:000000


　

　

　

[monitor]

port = 988

aulow = 120

hideclient_to = 15

monlevel = 4

appendchaninfo = 1




　

[cccam]

port = 12xxx

reshare = 1

ignorereshare = 0

version = 2.3.0

keepconnected = 1

#stealth = 1

#stealth ist alternativ

forward_origin_card = 1


　

　

　

[webif]

httpport = xxx

httphelplang = de

httpuser = welcher ? dyndns ?

httppwd = welcher ? dyndns ?

httprefresh = 10

httpallowed = 127.0.0.1,192.168.2.100-192.168.255.255

aulow = 120

oscam.server

Spoiler

[reader]


Label = skyv14

Description = SkyDE

Enable = 1

Protocol = smargo

services = sky_blue, sky_sportdigital, sky_select, sky_3d, sky_sport_hd, sky_buli, sky_sport, sky_film_hd, sky_film, sky_welt_extra, sky_welt_hd, sky_welt, sky_austriasat

Device = /dev/ttyUSB0

CAID = 098C

Detect = CD

Mhz = 357

CardMhz = 357

Fallback = 0

Group = 1

EMMCache = 1,1,2

oscam.user

Spoiler

[account]

user = dyndns account, oder ?

pwd = xxx

group = 1

au = skyv14

cccmaxhops = 2

cccreshare = 1

ok, ich hoffe das sind die Richtigen .

Gruß

Werner
　

- - - - - - - - - -

Hallo,

ja Karte ist Aktiv, schau ja mit dieser auf den Sky Recis.

 

[SevenEagle]

AW: HIILFEEE: Bin total am Ende.

Habe dir oben noch einen Tipp gegeben zu MHz. Wenn das nicht klappt eventuell auf smartreader Protokoll wechseln. Obwohl die Karte im smargo Protokoll schon mal bis zum vollständigen ATR kommt...

Gesendet von meinem XT1032 mit Tapatalk

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

Moment, reboot Server, oder brauch beim ändern der configs nicht jedesmal den Server neu booten ?

Gruß

 

[SevenEagle]

AW: HIILFEEE: Bin total am Ende.

Oscam restart reicht aus

Gesendet von meinem XT1032 mit Tapatalk

 

[supertreki]

AW: HIILFEEE: Bin total am Ende.

wenn ich im PUTTY OSCAM RESTART eingebe kommt folgende Meldung

WARNING: oscam.conf line 23 section [monitor] contains unknown setting 'appendch aninfo=1'

 

[Derek Buegel]

AW: HIILFEEE: Bin total am Ende.

Spoiler

[webif]

httpport = xxx # Port fürs Webif z.B. 12345

httphelplang = de

httpuser = welcher ? dyndns ? # Usernamen fürs Webif z.B. Thin

httppwd = welcher ? dyndns ?# Der fantasie sid keine Grenzen gesetzt

Spoiler

[account]

user = dyndns account, oder ? # Einen namen für den Clienten

pwd = xxx # Ein PW für den Clienten

Caid = 098C

group = 1

au = skyv14

cccmaxhops = 2

cccreshare = 1

Aber erst muss der Server laufen, dann kannst Du Clienten (User) anlegen.
Was willst Du sharen, Newcamd oder cccam?

MfG