HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

[super_sepp]

Hallo,

ich habe eine Fritte 7170 mit Oscam 1.20 build r9064 TB2.5 am laufen.

Habe zwei Easymouse 2 am laufen. Sky läuft prima aber die HD02 zickt. Sprich tut manchmal und manchmal nicht.

LOG:

Spoiler

014/01/28 20:26:53 4F8488 r hd+ [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): No such device
2014/01/28 20:26:53 4F8488 r hd+ [mouse] Error getting card status.

Reader:

Spoiler

[reader]
label = skyv13
protocol = mouse
device = /dev/ttyUSB0
caid = 09C4
detect = cd
mhz = 600
cardmhz = 357
boxid = 12345678
group = 1
emmcache = 1,1,2
#ins7e11 = 15
#ndsversion = 2

[reader]
label = hd+
protocol = mouse
device = /dev/ttyUSB1
caid = 1843
detect = CD
mhz = 357
cardmhz = 357
rsakey = BF..DD5
boxkey = A7..7C
group = 1
emmcache = 1,1,2
lb_weight = 100

Einstellung der Easymouse HD+
5v,phoenix,3.579mhz
oder unten,unten,unten

Hat jemand ne Idee?

 

[dodo83]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

hi,
hub passiv oder aktiv dazwischen?

 

[super_sepp]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

Hi,

aktiv Belkin f5u237.

 

[dodo83]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

probier mal die Reader per UDEV einzubinden
oder
wenn es geht nur den Reader der aussteigt direkt an der Fritte testen um zu sehen ob es vielleicht doch am Hub liegt
oder
auch mal anderen Hub testen

 

[mxer]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

Oder mal Karten in den Readern tauschen, anpassen nicht vergessen.

 

[super_sepp]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

o.k. versuche ich mal. nur was mich wundert, es tat seid gestern bis heute mit der gleichen config. Warum jetzt nicht mehr?

- - - - - - - - - -

Log: nach USB Hub tausch auf passiv

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Jan 28 21:02:07 2014
-------------------------------------------------------------------------------
2014/01/28 21:02:07 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9064 (mipsel-linux-uclibc-libusb)
2014/01/28 21:02:07 0 s creating pidfile /var/run/oscam.pid with pid 1635
2014/01/28 21:02:07 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/01/28 21:02:07 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2014/01/28 21:02:07 0 s signal handling initialized
2014/01/28 21:02:07 0 s 133 service-id's loaded in 46ms
2014/01/28 21:02:08 0 s 3 provid's loaded
2014/01/28 21:02:08 0 s 22 lengths for caid guessing loaded
2014/01/28 21:02:08 0 s cccam: initialized (fd=6, port=35356)
2014/01/28 21:02:08 0 s skyv13 [mouse] creating thread for device /dev/ttyUSB0
2014/01/28 21:02:08 0 s hd+ [mouse] creating thread for device /dev/ttyUSB1
2014/01/28 21:02:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/28 21:02:08 0 s waiting for local card init
2014/01/28 21:02:08 50EC88 h webif: decompressed 54567 bytes back into 155280 bytes
2014/01/28 21:02:08 50EC88 h HTTP Server running. ip=0.0.0.0 port=83
2014/01/28 21:02:08 4F8488 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=368)
2014/01/28 21:02:08 4F6788 r skyv13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2014/01/28 21:02:09 4F6788 r skyv13 [mouse] card detected
2014/01/28 21:02:09 4F8488 r hd+ [mouse] card detected
2014/01/28 21:02:10 4F6788 r skyv13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/01/28 21:02:10 4F6788 r skyv13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/28 21:02:10 4F6788 r skyv13 [mouse] Setting baudrate to 9600 bps
2014/01/28 21:02:10 4F6788 r skyv13 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2014/01/28 21:02:10 4F6788 r skyv13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/01/28 21:02:12 4F6788 r skyv13 [mouse] Card type: P1TV
2014/01/28 21:02:12 4F6788 r skyv13 [mouse] Rom version: 10A7
2014/01/28 21:02:12 4F6788 r skyv13 [mouse] parental lock setting: FF FF FF FF
2014/01/28 21:02:12 4F6788 r skyv13 [mouse] type: VideoGuard Sky Austria/Germany (09C4), caid: 09C4
2014/01/28 21:02:12 4F6788 r skyv13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/01/28 21:02:12 4F6788 r skyv13 [mouse] ready for requests
2014/01/28 21:02:12 4F6788 r skyv13 [mouse] found card system videoguard2
2014/01/28 21:02:12 4F6788 r skyv13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/28 21:02:12 4F6788 r skyv13 [videoguard2] card detected
2014/01/28 21:02:12 4F6788 r skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/01/28 21:02:12 4F8488 r hd+ [mouse] Error activating card.
2014/01/28 21:02:12 4F6788 r skyv13 [videoguard2] tier: 2712, expiry date: 2012/12/25-00:01:00
2014/01/28 21:02:12 4F6788 r skyv13 [videoguard2] tier: da7c, expiry date: 2012/12/27-00:01:04
2014/01/28 21:02:17 4F8488 r hd+ [mouse] Error activating card.
2014/01/28 21:02:17 4F6788 r skyv13 [videoguard2] tier: 007b, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:17 4F6788 r skyv13 [videoguard2] tier: 007d, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:17 4F6788 r skyv13 [videoguard2] tier: 0081, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:17 4F6788 r skyv13 [videoguard2] tier: 008e, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:17 4F6788 r skyv13 [videoguard2] tier: 00c0, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:17 4F6788 r skyv13 [videoguard2] tier: 00c7, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:18 4F6788 r skyv13 [videoguard2] tier: 00c8, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:18 4F6788 r skyv13 [videoguard2] tier: 00c9, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:18 4F6788 r skyv13 [videoguard2] tier: 00ca, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:18 4F6788 r skyv13 [videoguard2] tier: 00e4, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:18 4F6788 r skyv13 [videoguard2] tier: 00e5, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:18 4F6788 r skyv13 [videoguard2] tier: 00f3, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:18 4F6788 r skyv13 [videoguard2] tier: 00fa, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:18 4F6788 r skyv13 [videoguard2] tier: 00ff, expiry date: 2014/04/22-01:01:00
2014/01/28 21:02:21 4F8488 r hd+ [mouse] Error activating card.
2014/01/28 21:02:21 4F8488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/28 21:02:21 4F8488 r hd+ [mouse] card initializing error
2014/01/28 21:02:26 0 s init for all local cards done
2014/01/28 21:02:26 0 s anti cascading disabled

 

[mxer]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

Karte abgelaufen, keine EMM erhalten oder Mouse abgenippelt?

Die ersten beiden Punkte kannst Du prüfen, indem Du mal die Entitlements der Karte anschaust.
Oder beim Reboot von oscam im Log nach 0BEA suchst, da stehen 2 Datumsangaben dahinter.
Das Linke Datum gibt an, wann sie aktiviert wurde.
Rechne ein Jahr dazu, dann hast Du das Datum, ab wann die verlängert werden sollte.

Für den letzten Punkt ist der Vorschlag oben ja schon gewesen.

 

[super_sepp]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

LOg nach Readertausch und Veränderung in der Server:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Jan 28 21:07:11 2014
-------------------------------------------------------------------------------
2014/01/28 21:07:11 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9064 (mipsel-linux-uclibc-libusb)
2014/01/28 21:07:11 0 s creating pidfile /var/run/oscam.pid with pid 2825
2014/01/28 21:07:11 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/01/28 21:07:11 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2014/01/28 21:07:11 0 s signal handling initialized
2014/01/28 21:07:11 0 s 133 service-id's loaded in 11ms
2014/01/28 21:07:11 0 s 3 provid's loaded
2014/01/28 21:07:11 0 s 22 lengths for caid guessing loaded
2014/01/28 21:07:11 0 s cccam: initialized (fd=6, port=35356)
2014/01/28 21:07:11 0 s skyv13 [mouse] creating thread for device /dev/ttyUSB1
2014/01/28 21:07:11 0 s hd+ [mouse] creating thread for device /dev/ttyUSB0
2014/01/28 21:07:11 50EF68 h webif: decompressed 54567 bytes back into 155280 bytes
2014/01/28 21:07:11 50EF68 h HTTP Server running. ip=0.0.0.0 port=83
2014/01/28 21:07:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/28 21:07:11 0 s waiting for local card init
2014/01/28 21:07:12 4F8488 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)
2014/01/28 21:07:12 4F6788 r skyv13 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2014/01/28 21:07:12 4F6788 r skyv13 [mouse] card detected
2014/01/28 21:07:12 4F8488 r hd+ [mouse] card detected
2014/01/28 21:07:14 4F6788 r skyv13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/01/28 21:07:14 4F6788 r skyv13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/28 21:07:14 4F6788 r skyv13 [mouse] Setting baudrate to 9600 bps
2014/01/28 21:07:14 4F6788 r skyv13 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2014/01/28 21:07:14 4F8488 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/01/28 21:07:14 4F8488 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/28 21:07:14 4F8488 r hd+ [mouse] Setting baudrate to 115200 bps
2014/01/28 21:07:14 4F8488 r hd+ [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/01/28 21:07:14 4F6788 r skyv13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/01/28 21:07:14 4F8488 r hd+ [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/01/28 21:07:15 4F6788 r skyv13 [mouse] Card type: P1TV
2014/01/28 21:07:15 4F6788 r skyv13 [mouse] Rom version: 10A7
2014/01/28 21:07:16 4F8488 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2014/01/28 21:07:16 4F6788 r skyv13 [mouse] parental lock setting: FF FF FF FF
2014/01/28 21:07:16 4F6788 r skyv13 [mouse] type: VideoGuard Sky Austria/Germany (09C4), caid: 09C4
2014/01/28 21:07:16 4F6788 r skyv13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/01/28 21:07:16 4F6788 r skyv13 [mouse] ready for requests
2014/01/28 21:07:16 4F6788 r skyv13 [mouse] found card system videoguard2
2014/01/28 21:07:16 4F6788 r skyv13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/28 21:07:16 4F6788 r skyv13 [videoguard2] card detected
2014/01/28 21:07:16 4F6788 r skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/01/28 21:07:16 4F6788 r skyv13 [videoguard2] tier: 2712, expiry date: 2012/12/25-00:01:00
2014/01/28 21:07:16 4F6788 r skyv13 [videoguard2] tier: da7c, expiry date: 2012/12/27-00:01:04
2014/01/28 21:07:17 4F8488 r hd+ [mouse] detect native nagra card
2014/01/28 21:07:20 4F8488 r hd+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 007b, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 007d, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 0081, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 008e, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00c0, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00c7, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00c8, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00c9, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00ca, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00e4, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00e5, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00f3, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:21 4F6788 r skyv13 [videoguard2] tier: 00fa, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:22 4F6788 r skyv13 [videoguard2] tier: 00ff, expiry date: 2014/04/22-01:01:00
2014/01/28 21:07:22 4F8488 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2014/01/28 21:07:23 4F8488 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/01/28 21:07:23 4F8488 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/28 21:07:23 4F8488 r hd+ [mouse] Setting baudrate to 115200 bps
2014/01/28 21:07:23 4F8488 r hd+ [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/01/28 21:07:23 4F8488 r hd+ [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/01/28 21:07:25 4F8488 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2014/01/28 21:07:25 4F8488 r hd+ [mouse] card system not supported
2014/01/28 21:07:25 4F8488 r hd+ [mouse] Normal mode failed, reverting to Deprecated Mode
2014/01/28 21:07:27 4F8488 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/01/28 21:07:27 4F8488 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/28 21:07:27 4F8488 r hd+ [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/01/28 21:07:27 4F8488 r hd+ [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/01/28 21:07:27 4F8488 r hd+ [mouse] Card responded ok for ifsd request of 160
2014/01/28 21:07:28 4F8488 r hd+ [mouse] detect native nagra card
2014/01/28 21:07:30 4F8488 r hd+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/01/28 21:07:33 4F8488 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2014/01/28 21:07:34 4F8488 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/01/28 21:07:34 4F8488 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/28 21:07:34 4F8488 r hd+ [mouse] Setting baudrate to 115200 bps
2014/01/28 21:07:34 4F8488 r hd+ [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/01/28 21:07:34 4F8488 r hd+ [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/01/28 21:07:36 4F8488 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2014/01/28 21:07:39 4F8488 r hd+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/01/28 21:07:41 4F8488 r hd+ [mouse] T1 Resync command error, trying to reactivate!

Server:

Spoiler

[reader]
label = skyv13
protocol = mouse
device = /dev/ttyUSB1
caid = 09C4
detect = cd
mhz = 600
cardmhz = 357
boxid = 12345678
group = 1
emmcache = 1,1,2
#ins7e11 = 15
#ndsversion = 2

[reader]
label = hd+
protocol = mouse
device = /dev/ttyUSB0
detect = CD
caid = 1843
mhz = 357
cardmhz = 368
rsakey = F3..4DD5
boxkey = A..C
group = 1
emmcache = 1,1,2
#lb_weight = 100

- - - - - - - - - -

Hallo,

beide Karten sind noch gültig. HD noch knapp ein Jahr. Sky siehst Du ja im Spoiler.

- - - - - - - - - -

emm kommen von zwei boxen. sollte kein problem sein.
Mouse abgenippelt? Wär komisch, nach tausch tut sie es ja wieder.

 

[mxer]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

Die beiden Keys sehen etwas merkwürdig aus.
Ich kenne da so:
RSA = BF35...........4DD5
Box = A76........37C

Also fehlt bei RSA vorn das B !

 

[super_sepp]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

manchmal ist man dämlich! Ich weiß nicht wie oft ich das überlesen habe!
Danke das wars.

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Jan 28 21:21:20 2014
-------------------------------------------------------------------------------
2014/01/28 21:21:20 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9064 (mipsel-linux-uclibc-libusb)
2014/01/28 21:21:20 0 s creating pidfile /var/run/oscam.pid with pid 727
2014/01/28 21:21:20 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/01/28 21:21:20 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2014/01/28 21:21:20 0 s signal handling initialized
2014/01/28 21:21:20 0 s 133 service-id's loaded in 11ms
2014/01/28 21:21:20 0 s 3 provid's loaded
2014/01/28 21:21:20 0 s 22 lengths for caid guessing loaded
2014/01/28 21:21:20 0 s cccam: initialized (fd=6, port=35356)
2014/01/28 21:21:20 4F6788 h webif: decompressed 54567 bytes back into 155280 bytes
2014/01/28 21:21:20 4F6788 h HTTP Server running. ip=0.0.0.0 port=83
2014/01/28 21:21:20 0 s skyv13 [mouse] creating thread for device /dev/ttyUSB1
2014/01/28 21:21:20 0 s hd+ [mouse] creating thread for device /dev/ttyUSB0
2014/01/28 21:21:20 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/28 21:21:20 0 s waiting for local card init
2014/01/28 21:21:21 536CD0 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/01/28 21:21:21 534FD0 r skyv13 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2014/01/28 21:21:21 536CD0 r hd+ [mouse] card detected
2014/01/28 21:21:21 534FD0 r skyv13 [mouse] card detected
2014/01/28 21:21:23 534FD0 r skyv13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/01/28 21:21:23 534FD0 r skyv13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/28 21:21:23 534FD0 r skyv13 [mouse] Setting baudrate to 9600 bps
2014/01/28 21:21:23 534FD0 r skyv13 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2014/01/28 21:21:23 536CD0 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/01/28 21:21:23 536CD0 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/28 21:21:23 536CD0 r hd+ [mouse] Setting baudrate to 111600 bps
2014/01/28 21:21:23 536CD0 r hd+ [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/01/28 21:21:23 536CD0 r hd+ [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/01/28 21:21:23 534FD0 r skyv13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/01/28 21:21:24 534FD0 r skyv13 [mouse] Card type: P1TV
2014/01/28 21:21:24 534FD0 r skyv13 [mouse] Rom version: 10A7
2014/01/28 21:21:25 536CD0 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2014/01/28 21:21:25 534FD0 r skyv13 [mouse] parental lock setting: FF FF FF FF
2014/01/28 21:21:25 534FD0 r skyv13 [mouse] type: VideoGuard Sky Austria/Germany (09C4), caid: 09C4
2014/01/28 21:21:25 534FD0 r skyv13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/01/28 21:21:25 534FD0 r skyv13 [mouse] ready for requests
2014/01/28 21:21:25 534FD0 r skyv13 [mouse] found card system videoguard2
2014/01/28 21:21:25 534FD0 r skyv13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/28 21:21:25 534FD0 r skyv13 [videoguard2] card detected
2014/01/28 21:21:25 534FD0 r skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/01/28 21:21:25 534FD0 r skyv13 [videoguard2] tier: 2712, expiry date: 2012/12/25-00:01:00
2014/01/28 21:21:25 534FD0 r skyv13 [videoguard2] tier: da7c, expiry date: 2012/12/27-00:01:04
2014/01/28 21:21:26 536CD0 r hd+ [mouse] detect native nagra card
2014/01/28 21:21:28 536CD0 r hd+ [mouse] found card system nagra
2014/01/28 21:21:28 536CD0 r hd+ [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/28 21:21:28 536CD0 r hd+ [nagra] ROM: D N A S P 1 8 0
2014/01/28 21:21:28 536CD0 r hd+ [nagra] REV: M e r 0 0 0
2014/01/28 21:21:28 536CD0 r hd+ [nagra] SER: ############
2014/01/28 21:21:28 536CD0 r hd+ [nagra] CAID: 1843
2014/01/28 21:21:28 536CD0 r hd+ [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/01/28 21:21:28 536CD0 r hd+ [nagra] Prv.ID: 00 00 00 00
2014/01/28 21:21:28 536CD0 r hd+ [nagra] IRD ID: ############
2014/01/28 21:21:28 536CD0 r hd+ [nagra] active to: 2014/03/27 01:37
2014/01/28 21:21:28 536CD0 r hd+ [nagra] -----------------------------------------
2014/01/28 21:21:28 536CD0 r hd+ [nagra] |id |tier |valid from |valid to |
2014/01/28 21:21:28 536CD0 r hd+ [nagra] +----+--------+------------+------------+
2014/01/28 21:21:28 536CD0 r hd+ [nagra] |8011|0066 |2012/04/20 |2013/04/21 |
2014/01/28 21:21:28 536CD0 r hd+ [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2014/01/28 21:21:28 536CD0 r hd+ [nagra] |8011|0BEA |2013/12/30 |2015/02/04 |
2014/01/28 21:21:29 536CD0 r hd+ [nagra] -----------------------------------------
2014/01/28 21:21:29 536CD0 r hd+ [nagra] ready for requests

 

[mxer]

AW: HD02 unter Oscam 1.20 build r9064 auf fritte ERROR getting card status

Immerwieder diese kleinen Fehler.
Kenne ich zur Genüge. :dance3: