HD+ läuft nicht mit OScam

[GTD Bastion]

AW: HD+ läuft nicht mit OScam

Mach bitte mal cardmhz und mhz auf 368 und teste

 

[Vechtebock]

AW: HD+ läuft nicht mit OScam

Hier nochmals meine aktuellen OScam Setting

Spoiler

# OSCam Konfiguration IPC - oscam.conf

[global]
logfile = /var/log/ipc/OScam.log
serverip = 127.0.0.1
maxlogsize = 2480

[newcamd]
key = 0102030405060708091011121314
port = 34000@1843:003411

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpreadonly = 1

# OSCam Konfiguration IPC - oscam.server

[reader]
label = HD+
protocol = mouse
detect = CD
smargopatch = 1
group = 1
emmcache = 1,3,2
caid = 1843
device = /dev/ttyUSB1
rsakey = BF..........DD5
boxkey = A7............37C
cardmhz = 368
mhz = 368

# OSCam Konfiguration IPC - oscam.user

[account]
user = cccam
pwd = cccam
caid = 1843
ident = 1843:003411
hostname = localhost
uniq = 1
group = 1
au = hd+

Dann kommt dieser Log raus..

Spoiler

>> OSCam << cardserver started at Mon Jun 13 13:38:43 2011
-------------------------------------------------------------------------------
2011/06/13 13:38:43 B75758D0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5372 (i686-pc-linux)
2011/06/13 13:38:43 B75758D0 s version=1.00-unstable_svn, build #5372, system=i686-pc-linux, nice=0
2011/06/13 13:38:43 B75758D0 s client max. idle=120 sec, debug level=0
2011/06/13 13:38:43 B75758D0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/06/13 13:38:43 B75758D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/13 13:38:43 B75758D0 s Cannot open file "/var/etc/oscam.services" (errno=2 No such file or directory)
2011/06/13 13:38:43 B75758D0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/06/13 13:38:43 B75758D0 s signal handling initialized (type=sysv)
2011/06/13 13:38:43 B75758D0 s can't open file "/var/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/06/13 13:38:43 B75758D0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/06/13 13:38:43 B75758D0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/06/13 13:38:43 B75758D0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/06/13 13:38:43 B75758D0 s monitor: disabled
2011/06/13 13:38:43 B75758D0 s camd33: disabled
2011/06/13 13:38:43 B75758D0 s camd35: disabled
2011/06/13 13:38:43 B75758D0 s cs378x: disabled
2011/06/13 13:38:43 B75758D0 s newcamd: initialized (fd=7, port=34000, ip=127.0.0.1, crypted)
2011/06/13 13:38:43 B75758D0 s CAID: 1843
2011/06/13 13:38:43 B75758D0 s provid #0: 003411
2011/06/13 13:38:43 B75758D0 s radegast: disabled
2011/06/13 13:38:43 B75758D0 s http thread started
2011/06/13 13:38:43 B75758D0 s creating thread for device /dev/ttyUSB1
2011/06/13 13:38:43 B75758D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/06/13 13:38:43 B75758D0 s waiting for local card init
2011/06/13 13:38:43 B751BB70 r reader thread started (thread=B751BB70, label=hd+, device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
2011/06/13 13:38:43 B7527B70 h HTTP Server listening on port 16002
2011/06/13 13:38:46 B751BB70 r hd+ card detected
2011/06/13 13:38:56 B751BB70 r Error activating card.
2011/06/13 13:39:07 B751BB70 r Error activating card.
2011/06/13 13:39:18 B751BB70 r Error activating card.
2011/06/13 13:39:18 B751BB70 r card initializing error
2011/06/13 13:39:19 B75758D0 s init for all local cards done
2011/06/13 13:39:19 B75758D0 s anti cascading disabled
2011/06/13 13:39:19 B6D0EB70 c client connected to 34000 port
2011/06/13 13:39:19 B6D0EB70 c Connection closed to client
2011/06/13 13:39:19 B6D0EB70 c thread B6D0EB70 ended!
2011/06/13 13:39:19 B6D1AB70 c client connected to 34000 port
2011/06/13 13:39:19 B6D1AB70 c Connection closed to client
2011/06/13 13:39:19 B6D1AB70 c thread B6D1AB70 ended!
2011/06/13 13:39:20 B6D1AB70 c client connected to 34000 port
2011/06/13 13:39:20 B6D1AB70 c localhost: resolved ip=127.0.0.1
2011/06/13 13:39:20 B6D1AB70 c encrypted newcamd:34000-client 127.0.0.1 granted (cccam, au=on (1 reader))
2011/06/13 13:39:20 B6D1AB70 c user cccam authenticated successfully (CCcam)
2011/06/13 13:39:20 B6D1AB70 c AU disabled for user cccam

 

[GTD Bastion]

AW: HD+ läuft nicht mit OScam

Mach mal protocol = smargo

 

[Vechtebock]

AW: HD+ läuft nicht mit OScam

Bei Protocol = Smargo startet die OScam kurz und stürzt dann wohl ab. Im IPC in Rot.

 

[czutok]

AW: HD+ läuft nicht mit OScam

mach mal

protocol = smartreader

und nicht einfach smargo

 

[leyla38]

AW: HD+ läuft nicht mit OScam

Hier nochmals meine aktuellen OScam Setting

Spoiler

# OSCam Konfiguration IPC - oscam.conf

[global]
logfile = /var/log/ipc/OScam.log
serverip = 127.0.0.1
maxlogsize = 2480

[newcamd]
key = 0102030405060708091011121314
port = 34000@1843:003411

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpreadonly = 1

# OSCam Konfiguration IPC - oscam.server

[reader]
label = hd+
protocol = smargo
detect = CD
#smargopatch = 1
group = 1
emmcache = 1,3,2
caid = 1843
device = /dev/ttyUSB1
rsakey = BF..........DD5
boxkey = A7............37C
cardmhz = 368
mhz = 368

# OSCam Konfiguration IPC - oscam.user

[account]
user = cccam
pwd = cccam
caid = 1843
ident = 1843:003411
hostname = localhost
uniq = 1
group = 1
au = hd+

Dann kommt dieser Log raus..

Spoiler

>> OSCam << cardserver started at Mon Jun 13 13:38:43 2011

Spoiler

-------------------------------------------------------------------------------
2011/06/13 13:38:43 B75758D0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5372 (i686-pc-linux)
2011/06/13 13:38:43 B75758D0 s version=1.00-unstable_svn, build #5372, system=i686-pc-linux, nice=0
2011/06/13 13:38:43 B75758D0 s client max. idle=120 sec, debug level=0
2011/06/13 13:38:43 B75758D0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/06/13 13:38:43 B75758D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/13 13:38:43 B75758D0 s Cannot open file "/var/etc/oscam.services" (errno=2 No such file or directory)
2011/06/13 13:38:43 B75758D0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/06/13 13:38:43 B75758D0 s signal handling initialized (type=sysv)
2011/06/13 13:38:43 B75758D0 s can't open file "/var/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/06/13 13:38:43 B75758D0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/06/13 13:38:43 B75758D0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/06/13 13:38:43 B75758D0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/06/13 13:38:43 B75758D0 s monitor: disabled
2011/06/13 13:38:43 B75758D0 s camd33: disabled
2011/06/13 13:38:43 B75758D0 s camd35: disabled
2011/06/13 13:38:43 B75758D0 s cs378x: disabled
2011/06/13 13:38:43 B75758D0 s newcamd: initialized (fd=7, port=34000, ip=127.0.0.1, crypted)
2011/06/13 13:38:43 B75758D0 s CAID: 1843
2011/06/13 13:38:43 B75758D0 s provid #0: 003411
2011/06/13 13:38:43 B75758D0 s radegast: disabled
2011/06/13 13:38:43 B75758D0 s http thread started
2011/06/13 13:38:43 B75758D0 s creating thread for device /dev/ttyUSB1
2011/06/13 13:38:43 B75758D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/06/13 13:38:43 B75758D0 s waiting for local card init
2011/06/13 13:38:43 B751BB70 r reader thread started (thread=B751BB70, label=hd+, device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
2011/06/13 13:38:43 B7527B70 h HTTP Server listening on port 16002
2011/06/13 13:38:46 B751BB70 r hd+ card detected
2011/06/13 13:38:56 B751BB70 r Error activating card.
2011/06/13 13:39:07 B751BB70 r Error activating card.
2011/06/13 13:39:18 B751BB70 r Error activating card.
2011/06/13 13:39:18 B751BB70 r card initializing error
2011/06/13 13:39:19 B75758D0 s init for all local cards done
2011/06/13 13:39:19 B75758D0 s anti cascading disabled
2011/06/13 13:39:19 B6D0EB70 c client connected to 34000 port
2011/06/13 13:39:19 B6D0EB70 c Connection closed to client
2011/06/13 13:39:19 B6D0EB70 c thread B6D0EB70 ended!
2011/06/13 13:39:19 B6D1AB70 c client connected to 34000 port
2011/06/13 13:39:19 B6D1AB70 c Connection closed to client
2011/06/13 13:39:19 B6D1AB70 c thread B6D1AB70 ended!
2011/06/13 13:39:20 B6D1AB70 c client connected to 34000 port
2011/06/13 13:39:20 B6D1AB70 c localhost: resolved ip=127.0.0.1
2011/06/13 13:39:20 B6D1AB70 c encrypted newcamd:34000-client 127.0.0.1 granted (cccam, au=on (1 reader))
2011/06/13 13:39:20 B6D1AB70 c user cccam authenticated successfully (CCcam)
2011/06/13 13:39:20 B6D1AB70 c AU disabled for user cccam

Probiere mal so !!! und dann Emu neu starten

 

[Vechtebock]

AW: HD+ läuft nicht mit OScam

Bei Protocoll = Smartreader steht nach Neustart Oscam bei den IPC Prozessen die Oscam auch Rot.


@leyla38 damit startet mein OScam dann auch nicht mehr......

 

[mxer]

AW: HD+ läuft nicht mit OScam

@leyla der Eintrag
2011/06/13 13:39:20 B6D1AB70 c AU disabled for user cccam
deutet daraufhin, daß er gar kein Cccam-Protokoll in der *.config hat ?
So wird das nix mit Cccam.

 

[Vechtebock]

AW: HD+ läuft nicht mit OScam

@ mxer
Server ist Futro s400 Debian Squeeze 6.01 mit cccam 2.14 uns Oscam build#5372

Meine Klienten ausnahmslos Dream mit CCcam

Ich verwende eine S02 im Smargo 1.5 mit den Einstellungen Fixed 6,00 Kernel=Normal, T -Mode 1, EGT 0
Diese funkt auch.

Dazu soll eine HD02 über Oscam in CCcam eingebunden werden.
Smargo 1.5 mit den Einstellungen Fixed 3.69, Kernel=Normal, T -Mode 0 EGT 0

Hier meine Oscam Einstellungen:

Spoiler

# OSCam Konfiguration IPC - oscam.conf

[global]
logfile = /var/log/ipc/OScam.log
serverip = 127.0.0.1
maxlogsize = 2480

[newcamd]
key = 0102030405060708091011121314
port = 34000@1843:003411

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpreadonly = 1

# OSCam Konfiguration IPC - oscam.server

[reader]
label = HD+
protocol = mouse
detect = CD
#smargopatch = 1
group = 1
emmcache = 1,3,2
caid = 1843
device = /dev/ttyUSB1
rsakey = BF3..................DD5
boxkey = A7.........7C
mhz = 357
cardmhz = 368

# OSCam Konfiguration IPC - oscam.user

[account]
user = cccam
pwd = cccam
group = 1
au = HDplus
Ident = 1843:003411
CAID = 1843

In CCcam conf = N: 127.0.0.1 34000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # Oscam Verbindung

Kannst Du mir nun weiterhelfen? Danke

 

[mxer]

AW: HD+ läuft nicht mit OScam

Meine Dreams laufen mit scam3.5 am besten. Habe aber als Server eine 7170.
Weiß nicht genau, wie das bei einem PC als Server mit den Smargos ist.
Aber IMHO müßte da doch der smargopatch = 1 sein, also ohne # davor .

Außerdem sollte der Name entweder HD+ oder HDplus beim Reader und beim Client gleich sein.

Und mach mal noch enable = 1 in die oscam.server .

 

[Vechtebock]

AW: HD+ läuft nicht mit OScam

Das sind jetzt die aktuellen Einstellungen, die auch noch nicht zum Erfolg geführt haben.

Spoiler

# OSCam Konfiguration IPC - oscam.conf

[global]
logfile = /var/log/ipc/OScam.log
serverip = 127.0.0.1
maxlogsize = 2480


[newcamd]
key = 0102030405060708091011121314
port = 34000@1843:003411

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpreadonly = 1





# OSCam Konfiguration IPC - oscam.server

[reader]
label = HDplus
protocol = mouse
detect = CD
smargopatch = 0 oder 1 (macht keinen Unterschied)
enable = 1
group = 1
emmcache = 1,3,2
caid = 1843
device = /dev/ttyUSB1
rsakey = BF...............DD5
boxkey = A76................7C
mhz = 368
cardmhz = 368


# OSCam Konfiguration IPC - oscam.user

[account]
user = cccam
pwd = cccam
caid = 1843
ident = 1843:003411
hostname = localhost
uniq = 1
group = 1
au = HDplus

Die HD02 wird leider immer noch nicht erkannt.

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Jun 13 16:57:11 2011
-------------------------------------------------------------------------------
2011/06/13 16:57:11 B75768D0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5372 (i686-pc-linux)
2011/06/13 16:57:11 B75768D0 s version=1.00-unstable_svn, build #5372, system=i686-pc-linux, nice=0
2011/06/13 16:57:11 B75768D0 s client max. idle=120 sec, debug level=0
2011/06/13 16:57:11 B75768D0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/06/13 16:57:11 B75768D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/13 16:57:11 B75768D0 s Cannot open file "/var/etc/oscam.services" (errno=2 No such file or directory)
2011/06/13 16:57:11 B75768D0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/06/13 16:57:11 B75768D0 s signal handling initialized (type=sysv)
2011/06/13 16:57:11 B75768D0 s can't open file "/var/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/06/13 16:57:11 B75768D0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/06/13 16:57:11 B75768D0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/06/13 16:57:11 B75768D0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/06/13 16:57:11 B75768D0 s monitor: disabled
2011/06/13 16:57:11 B75768D0 s camd33: disabled
2011/06/13 16:57:11 B75768D0 s camd35: disabled
2011/06/13 16:57:11 B75768D0 s cs378x: disabled
2011/06/13 16:57:11 B75768D0 s newcamd: initialized (fd=7, port=34000, ip=127.0.0.1, crypted)
2011/06/13 16:57:11 B75768D0 s CAID: 1843
2011/06/13 16:57:11 B75768D0 s provid #0: 003411
2011/06/13 16:57:11 B75768D0 s radegast: disabled
2011/06/13 16:57:11 B75768D0 s http thread started
2011/06/13 16:57:11 B75768D0 s creating thread for device /dev/ttyUSB1
2011/06/13 16:57:11 B75768D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/06/13 16:57:11 B75768D0 s waiting for local card init
2011/06/13 16:57:11 B751CB70 r reader thread started (thread=B751CB70, label=hdplus, device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
2011/06/13 16:57:11 B7528B70 h HTTP Server listening on port 16002
2011/06/13 16:57:14 B751CB70 r hdplus card detected
2011/06/13 16:57:24 B751CB70 r Error activating card.
2011/06/13 16:57:35 B751CB70 r Error activating card.
2011/06/13 16:57:46 B751CB70 r Error activating card.
2011/06/13 16:57:46 B751CB70 r card initializing error
2011/06/13 16:57:47 B75768D0 s init for all local cards done
2011/06/13 16:57:47 B75768D0 s anti cascading disabled
2011/06/13 16:57:47 B6CF7B70 c client connected to 34000 port
2011/06/13 16:57:47 B6D03B70 c client connected to 34000 port
2011/06/13 16:57:47 B6D03B70 c Connection closed to client
2011/06/13 16:57:47 B6D03B70 c thread B6D03B70 ended!
2011/06/13 16:57:47 B6D0FB70 c client connected to 34000 port
2011/06/13 16:57:47 B6D0FB70 c Connection closed to client
2011/06/13 16:57:47 B6D0FB70 c thread B6D0FB70 ended!
2011/06/13 16:57:47 B6CF7B70 c localhost: resolved ip=127.0.0.1
2011/06/13 16:57:47 B6CF7B70 c encrypted newcamd:34000-client 127.0.0.1 granted (cccam, au=on (1 reader))
2011/06/13 16:57:47 B6CF7B70 c user cccam authenticated successfully (CCcam)
2011/06/13 16:57:47 B6CF7B70 c AU disabled for user cccam
2011/06/13 16:57:48 B6CF7B70 c cccam (1843&003411/EF74/89:B87F): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2011/06/13 16:57:55 B6CF7B70 c cccam (1843&003411/EF74/89:B688): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/06/13 16:58:01 B6D0FB70 c client connected to 34000 port
2011/06/13 16:58:01 B6D0FB70 c Connection closed to client
2011/06/13 16:58:01 B6D0FB70 c thread B6D0FB70 ended!
2011/06/13 16:58:01 B6D03B70 c client connected to 34000 port
2011/06/13 16:58:01 B6D03B70 c Connection closed to client
2011/06/13 16:58:01 B6D03B70 c thread B6D03B70 ended!
2011/06/13 16:58:01 B6CC7B70 c client connected to 34000 port
2011/06/13 16:58:01 B6CC7B70 c Connection closed to client
2011/06/13 16:58:01 B6CC7B70 c thread B6CC7B70 ended!
2011/06/13 16:58:02 B6CF7B70 c cccam (1843&003411/EF74/89BE0): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/06/13 16:58:09 B6CF7B70 c cccam (1843&003411/EF74/89:9F78): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/06/13 16:58:16 B6CF7B70 c cccam (1843&003411/EF74/89F16): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/06/13 16:58:23 B6CF7B70 c cccam (1843&003411/EF74/89:C03B): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/06/13 16:58:30 B6CF7B70 c cccam (1843&003411/EF74/89:31F4): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2011/06/13 16:58:37 B6CF7B70 c cccam (1843&003411/EF74/89:7EF7): rejected group (0 ms) (of 0 avail 0) (no matching reader)

 

[mxer]

AW: HD+ läuft nicht mit OScam

Wenn Du in oscam.server für die HD02 group = 1 hast, müßte für die S02 group = 2 stehen.
Es dürfen nicht beide die gleiche Gruppe haben !
Stell mal den Smargo auf fix = 3.69 und in der *.server mhz = 357 und cardmhz = 357

 

[czutok]

AW: HD+ läuft nicht mit OScam

@mxer

wer hat dir so ein schwachsin erzehlt mit den group ??

ich betreibe 4 karten über oscam und ale 4 haben group 1 , funzen 100%

die groupen bezichen sich auf die namen und pasworter , du kanst 10 karten über 1 name und pasword auslesen

 

[mxer]

AW: HD+ läuft nicht mit OScam

Und in der *.server steht bei Dir bei allen Reader group = 1 drin ?
OSCAM-Wiki :
group

Sie müssen registriert sein, um Links zu sehen.

Parameter wird benötigt
Jeder Reader muss in einer oder mehrere Gruppen eingetragen sein. Damit lässt sich bestimmen, welcher Client auf welchen Reader Zugriff hat. Gültige Werte 1-32

OK, wieder was dazugelernt .

@vechtebock mal den anderen Smargo probiert, nicht daß der einen Schaden hat ?