Hi,
habe ein CS mit einem Freund (CCCAM 2.3.0) und hole SKY und HD+ auf meine DM800 (auf der läuft OSCAM unstabile 1.2 6773). So läuft alles einwandfrei. Jetzt habe ich auf meinem Mac über EYETVCAMD eine Verbindung zu meiner DM800/OSCAM eingerichtet. Läuft auch, ABER: wenn ich auf beiden GLEICHZEITIG schaue, hängt sich das ganze so alle 5-10 Minuten einmal auf, ist für ca. 1 Minute nicht erreichbar und dann läuft wieder alles.
Wie gesagt, wenn ich nur auf einem der beiden schaue läuft alles einwandfrei stabil, nur in der Kombination nicht. Was kann das sein?
Danke für die Hilfe.
Gruß Marc
.conf
.dvbapi
.server
.user
habe ein CS mit einem Freund (CCCAM 2.3.0) und hole SKY und HD+ auf meine DM800 (auf der läuft OSCAM unstabile 1.2 6773). So läuft alles einwandfrei. Jetzt habe ich auf meinem Mac über EYETVCAMD eine Verbindung zu meiner DM800/OSCAM eingerichtet. Läuft auch, ABER: wenn ich auf beiden GLEICHZEITIG schaue, hängt sich das ganze so alle 5-10 Minuten einmal auf, ist für ca. 1 Minute nicht erreichbar und dann läuft wieder alles.
Wie gesagt, wenn ich nur auf einem der beiden schaue läuft alles einwandfrei stabil, nur in der Kombination nicht. Was kann das sein?
Danke für die Hilfe.
Gruß Marc
.conf
[cccam]port = 12000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240
# Web Interface
[webif]
httpport = 8080
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi
pmt_mode = 0
request_mode = 0
[newcamd]
key = 0102030405060708091011121314
port = 10000@1702:000000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240
# Web Interface
[webif]
httpport = 8080
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi
pmt_mode = 0
request_mode = 0
[newcamd]
key = 0102030405060708091011121314
port = 10000@1702:000000
.dvbapi
######### P = Priority ## I = Ignores ##########
#
# Sky Germany S02 Card
P: 1702 # prio Sky s02
P: 1833 # prio Sky s02
I: 09C4 # ignore Sky v13
#
# HDplus HD02 Card (black)
#P: 1843:000000 # prio HD02 HD+
#P: 1843:003411 # prio HD02 HD+
#I: 1830 # ignore HD01 HD+
#
#I: 0 # ignore all other Caid !!!!!!! < wichtig bei kd karte
#################################################
#
# Sky Germany S02 Card
P: 1702 # prio Sky s02
P: 1833 # prio Sky s02
I: 09C4 # ignore Sky v13
#
# HDplus HD02 Card (black)
#P: 1843:000000 # prio HD02 HD+
#P: 1843:003411 # prio HD02 HD+
#I: 1830 # ignore HD01 HD+
#
#I: 0 # ignore all other Caid !!!!!!! < wichtig bei kd karte
#################################################
.server
[reader]
label = cccamreader
enable = 1
protocol = cccam
device = XX.dyndns.org,12000
account = XXX
password = YYYY
reconnecttimeout = 30
group = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
cccwantemu = 0
ccckeepalive = 1
label = cccamreader
enable = 1
protocol = cccam
device = XX.dyndns.org,12000
account = XXX
password = YYYY
reconnecttimeout = 30
group = 1
cccversion = 2.3.0
cccmaxhops = 2
cccmindown = 1
cccwantemu = 0
ccckeepalive = 1
.user
#
# user configuration
#
[account]
user = dvbapi
group = 1
au = 1
betatunnel = 1833.FFFF:1702
[account]
user = EYETv
pwd = XXXXX
group = 1
au = skyde
caid = 1702
betatunnel = 1833.FFFF:1702
# user configuration
#
[account]
user = dvbapi
group = 1
au = 1
betatunnel = 1833.FFFF:1702
[account]
user = EYETv
pwd = XXXXX
group = 1
au = skyde
caid = 1702
betatunnel = 1833.FFFF:1702