AW: gbox und S02
# gbox config file
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# 00 don't show any ECM's
# 01 show only valid ECM's
# 02 show valid and bad ECM's with complete data display
C: { 02 }
# Display EMM messages on Konsole
# 00 don't show any EMM's
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display
M: { 02 }
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 01 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 00 } 192.168.1.3 dreambox
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.1.3 8017
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don't use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 16 } 192.168.1.3 8024
# Used Adapter and Port
# xx=adapter nr (0,1,2,3...)
# yy=comport to use (0=none,1=com1,2=com2, ...)
V: { f0 30 }
# Option for VDR (Linux X86) only
# xx yy ; xx = dvb-s Card nummber
# xx yy ; yy = comport to use by that card
V: { f0 30 }
#W: { 1C }
probiers damit müsste gehen sag mir bescheid obs geht
gruß
Bulmaa