Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben

gbox und S02

bigpsycho

Ist oft hier
Registriert
29. April 2008
Beiträge
164
Reaktionspunkte
16
Punkte
88
hallo,

Ich hab n paar Probleme beim Einrichten der gbox als Cardverteiler, bisher war ich "nur" client, jetzt hab ich ne Card, die ich ihm sharen will.

GBox als single Emu und dann?

Ich bin echt am verzweifeln, kann noch nichtmal auf der box gucken wo die karte drin steckt.

hier die gbox_cfg
# gbox config file

G: { 03 }
C: { 00 }
M: { 00 }
A: { 02 }
H: { 01 }
T: { 00 }
O: { 00 } 192.168.0.6
L: { 00 } 192.168.0.2 8017
Z: { 00 00 } 192.168.178.99 8024
V: { F0 35 }

und meine cwshare

M: { *meinedyndns { *meinPW* }}
X: { 6 }
N: { 00 00 00 3F 2600 4800 }
I: { 5 }
D: { *Freundesdns* { 8500 13370 { *freundesPW* { A5 A5 }}}}
S: { 01 01 01 }

So, weiter komm ich nicht...die Karte ist in Slot 1, was muss ich tun, damit ich und er gucken kann? Eigentlich müsste das doch soweit in Ordnung sein. Die Gbox version ist "S02" (2.25) tauglich...

Gruß und dank euch...
 
AW: gbox und S02

# gbox config file
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# 00 don't show any ECM's
# 01 show only valid ECM's
# 02 show valid and bad ECM's with complete data display
C: { 02 }
# Display EMM messages on Konsole
# 00 don't show any EMM's
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display
M: { 02 }
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 01 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 00 } 192.168.1.3 dreambox
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.1.3 8017
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don't use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 16 } 192.168.1.3 8024
# Used Adapter and Port
# xx=adapter nr (0,1,2,3...)
# yy=comport to use (0=none,1=com1,2=com2, ...)
V: { f0 30 }
# Option for VDR (Linux X86) only
# xx yy ; xx = dvb-s Card nummber
# xx yy ; yy = comport to use by that card
V: { f0 30 }
#W: { 1C }


probiers damit müsste gehen sag mir bescheid obs geht

gruß

Bulmaa
 
AW: gbox und S02

Ich hab eine dbox2 keine Dreambox (weil ich das in deiner config sehe), ist das relevant? Habs vergessen oben zu erwähnen.
Danke schonmal für deine mühen.
 
AW: gbox und S02

deine c-line mach ,mal da eine 03 rein dann müsst gehen
 
AW: gbox und S02

soweit ich weiß ist das egal weil gbox camd bei allen gleiche files
 
AW: gbox und S02

Hallo,

bleibt leider dunkel...:-( mit der CAMD3 läuft die Karte einwandfrei. Woran könnte das noch liegen? Irgendwie komisch...

Gruß
 
AW: gbox und S02

wirf den kompletten gbox.cfg mal rein dann muss es gehen zumindest müsste der cardreader dann gehen
 
AW: gbox und S02

Hier ist jetzt meine gbox_cfg

# gbox config file

# Task type
# 1702 CTS nonZ W: { 10 01 }
# 1702 DCD nonZ W: { 10 11 }
# 1702 CTS Z W: { 11 01 }
# 1702 DCD Z W: { 11 11 }
# 00 normal mode
# 01 Season Emulation in a Irdeto allcam (nonZ)
# 01 Com port to use for season emulatiom
#W: { 00 00 } 9600

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 don't show any ECM's
# 01 show only valid ECM's
# 02 show valid and bad ECM's with complete data display
C: { 02 }

# Display EMM messages on Konsole
# 00 don't show any EMM's
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display
M: { 02 }

# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 01 }

# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 00 } 192.168.0.6

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.2 8017
#J: { 02 03 00 00 00 }
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don't use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 00 } 192.168.0.2 8024

# Used Adapter and Port
# xx=adapter nr (0,1,2,3...)
# yy=comport to use (0=none,1=com1,2=com2, ...)
V: { f0 30 }

Damit sollte es doch eigentlich problemlos gehen oder?
Gruß....
 
AW: gbox und S02

hast du noch irgedwelche keys in var / key ???-

wenn ja lösche oder mach die raute vor Irdeto key
 
AW: gbox und S02

Hi bigsycho
mal ein frage welches image hast du auf deine dbox2!
also nachdem ich das Zebradem image V3 was abgeändert habe funzt sogar mein multicam.

Gruß Ago
 
AW: gbox und S02

@bigpsycho

als erstes muß du du folgende key dateien aus den key ordner löschen

Irdeto - Nagra -

dann brauchst erstmal die Gbox version 2,25d_s2Fix

dann solltest du folgende einstellungen in der Softcam.cfg machen damit die Karte richtig erkannt wrid
T: { 00 02 02 }
T: { 01 01042 000 } Irdeto




sorry ich kann leider die gbox datei nicht anhängen

jetzt wird deine Karte mit der Gbox erkannt
dies bezieht sich aber nur auf ein Multicam der Interne Reader der Dbox wird leider nicht unterstützt

deine anderen einstellungen kannst du lassen

PS . nicht vergessen die ports im Router frei zugeben

Soor ich leider die gbox datei nicht anhängen !!!!!!!
 
AW: gbox und S02

@bigpsycho

du hast eine Dbox2...hast du auch ein MC oder Cardreader für CS...kann ich hier nicht lesen...weil über Slot1 kein CS
 
Zurück
Oben