Fritzbox 7390 OSCam --> CCCam HD02 only Smargo

[DEDEX7200Pro]

Hallo Leute,

ich benötige mal eure Hilfe, ich hab OSCam in der neusten Version installiert und habe einen Argolis Smargo mit Firmware 1.7. Meine Receiver können allerdings nur CCCam, Newcam, etc. aber kein OSCam. Ich habe folgende Log erhalten:

log-Datei:

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Wed Oct 30 18:31:23 2013
-------------------------------------------------------------------------------
2013/10/30 18:31:23        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r8599 (mips-linux-uclibc-ssl-libusb-static)
2013/10/30 18:31:23        0 s creating pidfile /var/run/oscam.pid with pid 6386
2013/10/30 18:31:23        0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/10/30 18:31:23        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/10/30 18:31:23        0 s signal handling initialized
2013/10/30 18:31:23        0 s 19 service-id's loaded in 0ms
2013/10/30 18:31:23        0 s 19 tier-id's loaded
2013/10/30 18:31:23        0 s 5 provid's loaded
2013/10/30 18:31:23        0 s 22 lengths for caid guessing loaded
2013/10/30 18:31:23        0 s monitor: initialized (fd=7, port=988)
2013/10/30 18:31:23        0 s cccam: initialized (fd=8, port=12000)
2013/10/30 18:31:23   5CC4F8 h webif: decompressed 52416 bytes back into 150704 bytes
2013/10/30 18:31:23   5CC4F8 h HTTP Server listening on port 16001
2013/10/30 18:31:23        0 s hdplus [smartreader] creating thread for device Serial:Reader 4368243
2013/10/30 18:31:23   5F8708 r hdplus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/10/30 18:31:23        0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/10/30 18:31:23        0 s waiting for local card init
2013/10/30 18:31:23   5F8708 r Found reader with serial Reader 4368243 at 002:002
2013/10/30 18:31:23   5F8708 r Found smartreader device Serial:Reader 4368243
2013/10/30 18:31:23   5F8708 r hdplus [smartreader] Reader initialized (device=Serial:Reader 4368243, detect=cd, mhz=369, cardmhz=369)
2013/10/30 18:31:24   5F8708 r hdplus [smartreader] card detected
2013/10/30 18:31:27   5F8708 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2013/10/30 18:31:27   5F8708 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/30 18:31:27   5F8708 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/10/30 18:31:27   5F8708 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/10/30 18:31:27   5F8708 r hdplus [smartreader] Card responded ok for ifsd request of 28
2013/10/30 18:31:28   5F8708 r hdplus [smartreader] detect native nagra card
2013/10/30 18:31:32   5F8708 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/10/30 18:31:33   5F8708 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/10/30 18:31:36   5F8708 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2013/10/30 18:31:36   5F8708 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/30 18:31:36   5F8708 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/10/30 18:31:37   5F8708 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/10/30 18:31:37   5F8708 r hdplus [smartreader] Card responded ok for ifsd request of 28
2013/10/30 18:31:37   5F8708 r hdplus [smartreader] card system not supported
2013/10/30 18:31:37   5F8708 r hdplus [smartreader] Normal mode failed, reverting to Deprecated Mode
2013/10/30 18:31:40   5F8708 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2013/10/30 18:31:40   5F8708 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/30 18:31:40   5F8708 r hdplus [smartreader] Calculated work ETU is 100.81 us
2013/10/30 18:31:40   5F8708 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/10/30 18:31:41   5F8708 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/10/30 18:31:42   5F8708 r hdplus [smartreader] detect native nagra card
2013/10/30 18:31:43   5F8708 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/10/30 18:31:44   5F8708 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/10/30 18:31:47   5F8708 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2013/10/30 18:31:47   5F8708 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/30 18:31:47   5F8708 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/10/30 18:31:48   5F8708 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/10/30 18:31:48   5F8708 r hdplus [smartreader] Card responded ok for ifsd request of 28
2013/10/30 18:31:51   5F8708 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/10/30 18:31:52   5F8708 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/10/30 18:31:55   5F8708 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2013/10/30 18:31:55   5F8708 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/30 18:31:55   5F8708 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/10/30 18:31:56   5F8708 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/10/30 18:31:56   5F8708 r hdplus [smartreader] Card responded ok for ifsd request of 28
2013/10/30 18:31:56   5F8708 r hdplus [smartreader] card system not supported
2013/10/30 18:31:56   5F8708 r hdplus [smartreader] card initializing error
2013/10/30 18:31:56        0 s init for all local cards done
2013/10/30 18:31:56        0 s anti cascading disabled
2013/10/30 18:32:00   5FDD18 c encrypted cccam-client 192.168.1.110 granted (admin, au=auto (1 reader))

oscam.conf

Spoiler

[global]
logfile                       = /var/log/oscam.log
disablelog                    = 0
disableuserfile               = 0
usrfileflag                   = 0
clienttimeout                 = 5000
fallbacktimeout               = 2000
clientmaxidle                 = 120
cachedelay                    = 120
bindwait                      = 120
netprio                       = 0
clientdyndns                  = 0
resolvedelay                  = 30
unlockparental                = 0
nice                          = -1
serialreadertimeout           = 1500
maxlogsize                    = 1000
waitforcards                  = 1
preferlocalcards              = 1
saveinithistory               = 1
readerrestartseconds          = 5

[monitor]
port                          = 988
nocrypt                       = 192.168.1.100-192.168.1.130
aulow                         = 120
hideclient_to                 = 30
monlevel                      = 1
appendchaninfo                = 0

[cccam]
port = 12000
reshare = 2
version = 2.3.0
updateinterval = 0

[webif]
httpport                      = 16001
httpcss = /var/InternerSpeicher/service/oscam/style.css
httprefresh                   = 10
httpallowed                   = 192.168.1.100-192.168.1.130
httphideidleclients           = 1
httpreadonly                  = 0

oscam.server

Spoiler

 # oscam.server

[reader]
label = hdplus
protocol = smartreader
device = Serial:Reader 4368243
smargopatch = 1
caid = 1843
rsakey = vorhanden (leerzeichen belassen?!?)
boxkey = vorhanden
ecmwhitelist = 92
detect = cd
mhz = 369
cardmhz = 369
ident = 0000:001843
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
auprovid = 000001

oscam.user

Spoiler

[account]
user                          = admin
pwd                           = passwort
group                         = 1
uniq                          = 0
sleep                         = 0
monlevel                      = 1
au                            = 1
caid                          = 1843
cccmaxhops                    = 1
cccreshare                    = 1

Vielen Dank bereits im Voraus