Fehlermeldung bei DBOX2 Flash

[kaskaden789]

Hallo,
wollte heute meine DBox2 (Nokia 2x) neu flashen.
Beim flashen mit Nullmodemkabel kommt beim verifizieren das der Inhalt nicht übereinstimmt und die Box bleibt bei der Prüfung bei 66% stehen.
Habe schon mehere Image probiert überall das gleiche.
Hat jemand eine Idee?
Schon mal Danke schön sagt
Kaskaden789 :emoticon-0138-think

 

[Nasher]

AW: Fehlermeldung bei DBOX2 Flash

mit welchem prog flashst du denn??
hast du es schonmal mit der expertenfunktion versucht??

 

[kaskaden789]

AW: Fehlermeldung bei DBOX2 Flash

Hallo Nasher, ich habe den Expertenmodus genommen sowie es auch mit dem Hallenberg probiert. Ging mit Hallenberg eigentlich immer außer dieses mal. Er löscht,er beschreibt und bei der Verifizierung bleibt er stehen und sagt das der Inhalt nicht übereinstimmt. Das wars, mehr kommt nicht. LG kaskaden789

 

[Nasher]

AW: Fehlermeldung bei DBOX2 Flash

kannst du mal den log vom hallenberg hier posten???

 

[kaskaden789]

AW: Fehlermeldung bei DBOX2 Flash

Hallo Nasher, bin leider erst heute dazu gekommen. LG kaskaden789 {debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID

Sie müssen registriert sein, um Links zu sehen.

debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> seteth ethaddr 0x1001ffe3 ethaddr: 00:50:9c:1c:5d:ba dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 169.254.209.1, My IP 169.254.209.202 debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140008 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 169.254.209.1; our IP address is 169.254.209.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 169.254.209.1; our IP address is 169.254.209.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: *## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 169.254.209.1; our IP address is 169.254.209.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 169.254.209.1; our IP address is 169.254.209.202 Filename 'logo-fb'. Load address: 0x100000 Loading: *#################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1  0 Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO) 10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO) 10020000 (RO) 10040000 (RO) 10060000 (RO) 10080000 (RO) 100A0000 (RO) 100C0000 (RO) 100E0000 (RO) 10100000 (RO) 10120000 (RO) 10140000 (RO) 10160000 (RO) 10180000 (RO) 101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO) 10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO) 102A0000 (RO) 102C0000 (RO) 102E0000 (RO) 10300000 (RO) 10320000 (RO) 10340000 (RO) 10360000 (RO) 10380000 (RO) 103A0000 (RO) 103C0000 (RO) 103E0000 (RO) 10400000 (RO) 10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO) 104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO) 10520000 (RO) 10540000 (RO) 10560000 (RO) 10580000 (RO) 105A0000 (RO) 105C0000 (RO) 105E0000 (RO) 10600000 (RO) 10620000 (RO) 10640000 (RO) 10660000 (RO) 10680000 (RO) 106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO) 10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO) 107A0000 (RO) 107C0000 (RO) 107E0000 (RO) Using SCC ETHERNET device TFTP from server 169.254.209.1; our IP address is 169.254.209.202 Filename 'kernel-yadd'. Load address: 0x100000 Loading: *################################################################# ################################################################# ## done Bytes transferred = 675073 (a4d01 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 675009 Bytes = 659.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting pid 11, console /dev/console: '/etc/init.d/rcS' dbox2 - ImageFlashingAssistent - Hallenberg.com - Verifziere Daten: 5504k von 8064k (68%)Der Inhalt des Flashs stimmt nicht mit dem geflashten Image Sie koennen die dbox jetzt ausschalten. Please press Enter to activate this console. ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: 3Com 3C920B-EMB Integrated Fast Ethernet Controller - Paketplaner-Miniport (1) IP-Adresse des Netzwerkadapters: 169.254.209.1 IP-Adresse die die dbox bekommt: 169.254.209.202 Comport: Kommunikationsanschluss (COM1) Betriebssystem: Microsoft Windows XP Professional Service Pack 3 (Build 2600) CPU 1: AMD Athlon(tm) XP 2800+ @ 2090 MHz Dateiname des Images: 2x_Cable_MD-Image_5.40.img Imagetyp: Zwei Flashs DBOX-IFA Version: 2.3 ------ Powered by

Sie müssen registriert sein, um Links zu sehen.

------

 

[Nasher]

AW: Fehlermeldung bei DBOX2 Flash

da ist was faul
kannst du mal den log vom bootmanager hier posten??

 

[kaskaden789]

AW: Fehlermeldung bei DBOX2 Flash

Hallo Nasher, weiss leider nicht wie das geht. LG Kaskaden789

 

[iceman75]

AW: Fehlermeldung bei DBOX2 Flash

Versuche es mal so;

[FONT=&quot]- Box mit PC über ein Nullmodem- und Crossoverkabel[/FONT][FONT=&quot]
verbinden (DBox muss Strom Haben nach der
verbindung zwischen PC und Box --
- Bootmanager öffnen
- DBoxII IP zuweisen z.B 192.168.0.10
- RARP Server An!!!!!!
- COM Port öffnen (Häckchen setzen),COM auswählen
und 9600 Verbindungsgeschwindigkeit einstellen
- BootP/TFTP-Server Starten ein (Häckchen setzen)
Bootfile für DBox auswählen
C:\Programme\DBoxBoot\ppcboot_writeflash
die ppcboot_writeflash liegt im Ordner von DBoxBoot
NFS Server starten!!!!
Root Verzeichnis:c:\dbox2
unter c:\dbox2 (auf der Festplatte C einen Ordner mit dem Namen:dbox2
anlegen!!!

- nun im Bootmanagers auf Utilities klickt
- auf Image flashen.Jetzt öffnet sich ein Dateidialog, ( am besten das Image
auf C kopieren und dann auswählen!!)
wo du das Image auswählst und mit öffnen bestätigst.

- nun die Pfeil-nach-oben-Tasten + Standby Taste an
der Box gleichzeitig drücken ,dann nur die Standby
Taste loslassen und die Pfeil-nach-oben-Tasten
noch etwas gedrückt ( ca. 3 sec halten bis 1Balken im LCD der
Box erscheint. (Das LCD Bild bleibt nun stehen)

- Gehe nun in das Com-Terminal des Bootmanagers
und warte ab bis die Box einpaar selbsttest
durchgeführt hat.
der log im Bootmanager sieht dann so aus:

etry count ex
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID xxxxxxxxxxxxxxxxxx
debug: HWrev 21 FPrev 0.23
[/FONT][FONT=&quot]d[/FONT][FONT=&quot]ebug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26ec0, &_data 0x26ec0, &_edata
0x2a9bc
debug: &_end 0x35944, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> *

Am Ende des Log kommt das: " dbox2:root> "
geb jetzt mal nur "* boot net " ein nun sollte das

[/FONT]

 

[Nasher]

AW: Fehlermeldung bei DBOX2 Flash

du brauchst eigentlich nur den bootmanager starten und damit ein image flashen.
dir wird dann der log angezeigt.
hast du denn auch ein crossoverkabel da???

 

[kaskaden789]

AW: Fehlermeldung bei DBOX2 Flash

Hallo Nasher, habe mit Crossover geflasht. Habe doch schon den kpl.Flash mit Hallenberg gepostet. Fehlt da noch was? LG kaskaden789

 

[Nasher]

AW: Fehlermeldung bei DBOX2 Flash

ja...das wichtigste wird nicht übertragen......
versuche mal mit dem bootmanager ein image zu flashen.
du wirst den log dann sehen.

 

[kaskaden789]

AW: Fehlermeldung bei DBOX2 Flash

Hallo Nasher,
ich hoffe das es das richtige ist im nächsten Beitrag.
Habe mal den Bootvorgang mitgelockt.
LG kaskaden789

 

[kaskaden789]

AW: Fehlermeldung bei DBOX2 Flash

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for reading.
[yhttpd] Webserver starting...
[camd2] ca system id: 1722
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
Segmentation fault
Neutrino exited with nonzero exit status, restarting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[neutrino] executing mkdir -p /var/share/tuxbox/neutrino/lcdd
[neutrino] alternate folder created in: /var/share/tuxbox/neutrino/lcdd
[neutrino] Loading of scan settings failed. Using defaults.
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
Bad emulation neutrino/210
NIP: 0fd87950 instruction: 7c7f1c7f opcode: 1f A: 1f B: 3 C: 11 code: 23f rc: 1

pte @ 0x fd87950: (0xc18f40fc)->(0xc10b461c)->0x010528a9
RPN: 01052 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1052950 pte @ 0xc1052950: no pmd
Floating point exception
Neutrino exited with nonzero exit status, restarting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[neutrino] Loading of scan settings failed. Using defaults.
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...Segmentation fault
Neutrino exited with nonzero exit status, restarting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[neutrino] Loading of scan settings failed. Using defaults.
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...Segmentation fault
Neutrino exited with nonzero exit status, restarting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[neutrino] Loading of scan settings failed. Using defaults.
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...Segmentation fault
Neutrino exited with nonzero exit status, restarting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[neutrino] Loading of scan settings failed. Using defaults.
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...Segmentation fault
Neutrino exited with nonzero exit status, restarting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[neutrino] Loading of scan settings failed. Using defaults.
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[sectionsd] getUTC: read: Connection timed out
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
Data CRC 6b77e814 != calculated CRC 0a2397ea for node at 0006d514
libpng error: Read Error
[neutrino/lcd] no valid power background.
[lcdd] LCD-Init failed!
Oops: kernel access of bad area, sig: 11
NIP: C000C50C XER: 00000000 LR: C000C4C8 SP: C18F7D40 REGS: c18f7c90 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: F168C1FF, DSISR: C0000000
TASK = c18f6000[242] 'neutrino' Last syscall: 102
last math 00000000 last altivec 00000000
GPR00: A8B6EA0C C18F7D40 C18F6000 C18F7D4C 00009032 00000001 C1CBAAD4 00000000
GPR08: 00000001 00000000 00000000 DC00C13B 80808080 101E2610 00000000 00000000
GPR16: 00000000 00000000 00000000 101E0000 00009032 018F7F40 C125E720 C0160000
GPR24: C01462E8 00000001 00000001 C13B721C 00000000 C13B751E F168C1FF C18F7D40
Call backtrace:
C00CF048 C00CFCEC C0118E58 C00CCA20 C00CDA24 C00CE304 C000289C
00000000 30019228 0FF4371C 0FF43954 0FE03394 1001F0DC 0F6F00AC
00000000
Segmentation fault
Neutrino exited with nonzero exit status, restarting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
Oops: kernel access of bad area, sig: 11
NIP: C000D9E0 XER: 20000000 LR: C000D9D0 SP: C143DE30 REGS: c143dd80 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0A000000, DSISR: C2000000
TASK = c143c000[158] 'zapit' Last syscall: 142
last math 00000000 last altivec 00000000
GPR00: 00000000 C143DE30 C143C000 00000001 00009032 00000000 0000001F C143C03C
GPR08: C1C6CA84 00000008 C1052D1B 0A000000 0FD13E80 1005C444 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 C143DEF0 00000000 00000000 0000000D
GPR24: 00000001 00000001 00000345 C115E580 C143DED0 C1052D13 C1052008 C1052D0F
Call backtrace:
00000000 C0044EE4 C00452B8 C004552C C0007E34 C000289C 0FC824CC
0FF17F2C 0FF179A4 100146A4 0FF17B60 0FF17C08 10016D60 0FC260AC
00000000
[basicsocket] receive_data: Connection reset by peer
[CBasicClient] receive failed: /tmp/zapit.sock
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
Data CRC 6b77e814 != calculated CRC a46573ee for node at 0006d514
libpng error: Read Error
[neutrino/lcd] no valid power background.
[lcdd] LCD-Init failed!
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
/dev/input/event1: No such file or directory
[neutrino] menue setup
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] received 0 sats
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out

 

[Nasher]

AW: Fehlermeldung bei DBOX2 Flash

da ist zu 99% der flash hinüber

 

[kaskaden789]

AW: Fehlermeldung bei DBOX2 Flash

Oder etwa das ??

{debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-91.8f.19.07.00.00-ce
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.178.25, My IP 192.168.178.30
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1c-5d-ba
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.178.25; our IP address is 192.168.178.30
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.178.25; our IP address is 192.168.178.30
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/1/2x_Cable_MD-Image_5.40.img
BOOTP broadcast 1
TFTP from server 192.168.178.25; our IP address is 192.168.178.30
Filename '/C/1/2x_Cable_MD-Image_5.40.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash... done

dbox2-ppcboot>