MLD-SERVER> dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.103.198 (devel@nightbuild-rpi) (gcc version 4.9.2 (Raspbian 4.9.2-10) ) #1 SMP PREEMPT Sun Dec 11 16:03:17 CET 2016
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun7i
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x4fdfffff ( 190 MB)
[ 0.000000] G2D : 0x4fe00000 - 0x50dfffff ( 16 MB)
[ 0.000000] LCD : 0x50e00000 - 0x52dfffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0a07a00, node_mem_map d2e00000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 128016 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @d3608000 s8256 r8192 d16320 u32768
[ 0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: root=UUID=283aa611-8282-4f40-870e-b2b2fa00944d sunxi_ve_mem_reserve=190 sunxi_g2d_mem_reserve=16 sunxi_fb_mem_reserve=32 disp.screen0_output_mode=EDID:1280x720p50 hdmi.audio=EDID:1 quiet splash=silent nodialog
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 781484k/781484k available, 267092k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc09636d8 (9582 kB)
[ 0.000000] .init : 0xc0964000 - 0xc099b040 ( 221 kB)
[ 0.000000] .data : 0xc099c000 - 0xc0a101a8 ( 465 kB)
[ 0.000000] .bss : 0xc0a101cc - 0xc0be4560 (1873 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:192
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] start_kernel(): bug: interrupts were enabled early
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.013299] Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
[ 0.075984] pid_max: default: 32768 minimum: 301
[ 0.079646] Mount-cache hash table entries: 512
[ 0.083821] Initializing cgroup subsys cpuacct
[ 0.087141] Initializing cgroup subsys memory
[ 0.090563] Initializing cgroup subsys devices
[ 0.093995] Initializing cgroup subsys freezer
[ 0.097219] Initializing cgroup subsys blkio
[ 0.100890] Initializing cgroup subsys perf_event
[ 0.104466] CPU: Testing write buffer coherency: ok
[ 0.109642] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.116744] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.122277] Setting up static identity map for 0x406bea90 - 0x406beae8
[ 0.238569] CPU1: Booted secondary processor
[ 0.297150] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.299152] Brought up 2 CPUs
[ 0.304462] SMP: Total of 2 processors activated (3824.02 BogoMIPS).
[ 0.307656] devtmpfs: initialized
[ 0.313188] dummy:
[ 0.316849] NET: Registered protocol family 16
[ 0.323110] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.330814] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.335680] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.338833] [ccu-inf] aw clock manager init
[ 0.341104] [ccu-inf] aw_ccu_init
[ 0.345063] [ccu-inf] script config pll3 to 297MHz
[ 0.348813] [ccu-inf] script config pll4 to 300MHz
[ 0.352560] [ccu-inf] script config pll6 to 600MHz
[ 0.356322] [ccu-inf] script config pll7 to 297MHz
[ 0.360069] [ccu-inf] script config pll8 to 336MHz
[ 0.362818] Init eGon pin module V2.0
[ 0.371875] bio: create slab <bio-0> at 0
[ 0.375405] sunxi_gpio driver init ver 1.3
[ 0.381690] gpiochip_add: registered GPIOs 1 to 88 on device: A1X_GPIO
[ 0.384805] SCSI subsystem initialized
[ 0.387646] libata version 3.00 loaded.
[ 0.392308] usbcore: registered new interface driver usbfs
[ 0.396630] usbcore: registered new interface driver hub
[ 0.400793] usbcore: registered new device driver usb
[ 0.406584] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.411569] Switching to clocksource arch_sys_counter
[ 0.413646] FS-Cache: Loaded
[ 0.415821] CacheFiles: Loaded
[ 0.426314] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
[ 0.430101] [sw_hcd0]: usb host driver initialize........
[ 0.434315] [sw_hcd0]: open_usb_clock
[ 0.458521] [sw_hcd0]: host_init_state = 0
[ 0.459491] [sw_hcd0]: platform is usb host
[ 0.462397] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
[ 0.473589] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 70
[ 0.486124] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
[ 0.492825] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
[ 0.496230] hub 1-0:1.0: USB hub found
[ 0.499124] hub 1-0:1.0: 1 port detected
[ 0.502993] wrn: hcd is not enable, need not start hcd
[ 0.504344] [sw_hcd0]: sw_usb_host0_disable start
[ 0.510356] -------sw_hcd0_soft_disconnect---------
[ 0.513338] is_on = 0, hcd0_set_vbus_cnt = 0
[ 0.516388] [sw_hcd_host0]: Set USB Power Off
[ 0.520132] wrn: hcd is not enable, need not stop hcd
[ 0.521184] [sw_hcd0]: close_usb_clock
[ 0.523671] [sw_hcd0]: sw_usb_host0_disable end
[ 0.526856] [sw_udc]: udc_init: version 20080411
[ 0.533165] NET: Registered protocol family 2
[ 0.549225] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.556079] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.563520] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.570131] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.572318] TCP: reno registered
[ 0.577208] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.582542] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.586170] NET: Registered protocol family 1
[ 0.591446] RPC: Registered named UNIX socket transport module.
[ 0.595106] RPC: Registered udp transport module.
[ 0.598815] RPC: Registered tcp transport module.
[ 0.604206] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.608776] Trying to unpack rootfs image as initramfs...
[ 2.954720] Freeing initrd memory: 3624K
[ 2.960114] audit: initializing netlink socket (disabled)
[ 2.963825] type=2000 audit(2.940:1): initialized
[ 2.968498] highmem bounce pool size: 64 pages
[ 2.979939] VFS: Disk quotas dquot_6.5.2
[ 2.985404] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.992562] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.997950] NFS: Registering the id_resolver key type
[ 3.002396] NTFS driver 2.1.30 [Flags: R/W].
[ 3.005689] fuse init (API version 7.18)
[ 3.013940] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 3.017856] Btrfs loaded
[ 3.020669] msgmni has been set to 1005
[ 3.027912] alg: No test for stdrng (krng)
[ 3.034573] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.037489] io scheduler noop registered
[ 3.040715] io scheduler deadline registered
[ 3.044406] io scheduler cfq registered (default)
[ 3.049206] sunxi disp driver loaded (/dev/disp api 1.0)
[ 3.054727] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 3.059449] [uart]: used uart info.: 0x8d
[ 3.064133] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[ 3.090405] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[ 3.095275] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
[ 3.121437] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[ 3.126311] [uart]: serial probe 3 irq 36 mapbase 0x01c28c00
[ 3.152441] sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
[ 3.157287] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00
[ 3.183409] sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
[ 3.185967] G2D: drv_g2d_init
[ 3.190669] G2D: g2dmem: g2d_start=4fe00000, g2d_size=1000000
[ 3.193893] G2D: head:cfe00000,tail:d0e00000
[ 3.197260] G2D: Module initialized.major:251
[ 3.206131] brd: module loaded
[ 3.211889] loop: module loaded
[ 3.214220] nand driver is disabled
[ 3.217993] gpio count < =0 ,gpio_count is: 0
[ 3.223928] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[ 3.228234] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[ 3.235672] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 3.242131] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[ 3.245482] scsi0 : sw_ahci_platform
[ 3.252678] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 3.258989] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 3.265351] emac_init fetch emac using configuration failed
[ 3.267851] emac driver is disabled
[ 3.272252] eth%d: device MAC address 02:43:05:c1:72:11
[ 3.275240] gmac_para gpio count is 18
[ 3.280460] [gmac]: sun6i_gmac platform driver registration completed
[ 3.283721] PPP generic driver version 2.4.2
[ 3.287653] PPP BSD Compression module registered
[ 3.291659] PPP Deflate Compression module registered
[ 3.298670] PPP MPPE Compression module registered
[ 3.302080] NET: Registered protocol family 24
[ 3.308210] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.313410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.315906] [sw-ehci1]: open clock
[ 3.338535] [sw-ehci1]: Set USB Power ON
[ 3.344973] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.351211] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
[ 3.355595] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
[ 3.376009] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[ 3.378635] ehci_irq: port change detect
[ 3.381870] hub 2-0:1.0: USB hub found
[ 3.384797] hub 2-0:1.0: 1 port detected
[ 3.387381] [sw-ohci1]: open clock
[ 3.413481] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 3.419720] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
[ 3.424022] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
[ 3.488950] hub 3-0:1.0: USB hub found
[ 3.491844] hub 3-0:1.0: 1 port detected
[ 3.494447] [sw-ehci2]: open clock
[ 3.517086] [sw-ehci2]: Set USB Power ON
[ 3.523520] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.529747] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
[ 3.534102] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
[ 3.555982] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[ 3.558603] ehci_irq: port change detect
[ 3.561910] hub 4-0:1.0: USB hub found
[ 3.564820] hub 4-0:1.0: 1 port detected
[ 3.567385] [sw-ohci2]: open clock
[ 3.593534] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 3.599820] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
[ 3.604118] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
[ 3.608471] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.644266] ehci_irq: port change detect
[ 3.668964] hub 5-0:1.0: USB hub found
[ 3.671856] hub 5-0:1.0: 1 port detected
[ 3.676980] usbcore: registered new interface driver cdc_acm
[ 3.683934] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.687783] Initializing USB Mass Storage driver...
[ 3.692880] usbcore: registered new interface driver usb-storage
[ 3.696472] USB Mass Storage support registered.
[ 3.701384] usbcore: registered new interface driver ums-alauda
[ 3.706381] usbcore: registered new interface driver ums-cypress
[ 3.708997] The port change to OHCI now!
[ 3.714013] usbcore: registered new interface driver ums-datafab
[ 3.719202] usbcore: registered new interface driver ums_eneub6250
[ 3.724197] usbcore: registered new interface driver ums-freecom
[ 3.729120] usbcore: registered new interface driver ums-isd200
[ 3.734203] usbcore: registered new interface driver ums-jumpshot
[ 3.739050] usbcore: registered new interface driver ums-karma
[ 3.744133] usbcore: registered new interface driver ums-onetouch
[ 3.749173] usbcore: registered new interface driver ums-realtek
[ 3.754086] usbcore: registered new interface driver ums-sddr09
[ 3.759012] usbcore: registered new interface driver ums-sddr55
[ 3.763835] usbcore: registered new interface driver ums-usbat
[ 3.768571] mousedev: PS/2 mouse device common for all mice
[ 3.774282] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 3.778211] config i2c gpio with gpio_config api
[ 3.783645] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[ 3.789492] axp_mfd 0-0034: AXP internal temperature monitoring enabled
[ 3.794763] [AXP]axp driver uning configuration failed(342)
[ 3.796721] [AXP]power_start = 0
[ 3.799782] I2C: i2c-0: AW16XX I2C adapter
[ 3.803161] config i2c gpio with gpio_config api
[ 3.806370] I2C: i2c-1: AW16XX I2C adapter
[ 3.809740] config i2c gpio with gpio_config api
[ 3.812892] I2C: i2c-2: AW16XX I2C adapter
[ 3.816278] config i2c gpio with gpio_config api
[ 3.819446] I2C: i2c-3: AW16XX I2C adapter
[ 3.822181] [cedar dev]: install start!!!
[ 3.825179] [cedar dev]: install end!!!
[ 3.828579] [tt]----- avs_dev driver load... ----
[ 3.832152] [tt]----- register iomem ----
[ 3.834974] Cannot reserve region for ccmu
[ 3.838597] [tt]--- avs_dev driver load ok!! -----
[ 3.840972] axp20_ldo1: 1300 mV
[ 3.846204] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 3.851442] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 3.856573] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 3.861896] axp20_buck2: 700 <--> 2275 mV at 1450 mV
[ 3.868408] somebody is trying to set dcdc3 range to (1300000, 1300000) uV
[ 3.873449] but we keep dcdc3 = 1300000 uV from the bootloader
[ 3.877746] axp20_buck3: 700 <--> 3500 mV at 1300 mV
[ 3.882596] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 3.892122] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[ 3.910148] axp20_ldo2: Failed to create debugfs directory
[ 3.914921] device-mapper: uevent: version 1.0.3
[ 3.922768] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.927642] device-mapper: multipath: version 1.3.2 loaded
[ 3.933125] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.938721] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 3.944289] device-mapper: multipath service-time: version 0.2.0 loaded
[ 3.947741] cpuidle: using governor ladder
[ 3.950622] cpuidle: using governor menu
[ 3.952939] [mmc-msg] sw_mci_init
[ 3.958694] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
[ 3.963897] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 3.972201] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.980398] [mmc-msg] sdc0 Probe: base:0xf0168000 irq:64 sg_cpu:f016a000(43c00000) ret 0.
[ 3.984966] [mmc_pm]: failed to fetch sdio card configuration!
[ 3.987433] sunxi_leds driver init
[ 3.991490] Registered led device: green:ph24:led1
[ 3.996531] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.001723] usbcore: registered new interface driver usbhid
[ 4.004538] usbhid: USB HID core driver
[ 4.007227] ashmem: initialized
[ 4.010834] logger: created 256K log 'log_main'
[ 4.014630] logger: created 256K log 'log_events'
[ 4.018383] logger: created 256K log 'log_radio'
[ 4.022155] logger: created 256K log 'log_system'
[ 4.027634] IPv4 over IPv4 tunneling driver
[ 4.030364] TCP: bic registered
[ 4.032641] TCP: cubic registered
[ 4.035284] TCP: westwood registered
[ 4.037902] TCP: highspeed registered
[ 4.040171] TCP: hybla registered
[ 4.042354] TCP: htcp registered
[ 4.047749] usb 3-1: new full-speed USB device number 2 using sw-ohci
[ 4.050035] TCP: vegas registered
[ 4.052219] TCP: veno registered
[ 4.054774] TCP: scalable registered
[ 4.056785] TCP: lp registered
[ 4.058967] TCP: yeah registered
[ 4.061496] TCP: illinois registered
[ 4.064718] Initializing XFRM netlink socket
[ 4.068788] NET: Registered protocol family 10
[ 4.073356] NET: Registered protocol family 17
[ 4.076845] NET: Registered protocol family 15
[ 4.081500] [mmc_pm]: No sdio card, please check your config !!
[ 4.085170] Registering the dns_resolver key type
[ 4.087290] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 4.095864] Registering SWP/SWPB emulation handler
[ 4.100477] axp20_buck2: Failed to create debugfs directory
[ 4.106627] [cpu_freq] INF:-------------------V-F Table-------------------
[ 4.111708] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
[ 4.116767] [cpu_freq] INF: voltage = 1425mv frequency = 912MHz
[ 4.121812] [cpu_freq] INF: voltage = 1350mv frequency = 864MHz
[ 4.126867] [cpu_freq] INF: voltage = 1250mv frequency = 720MHz
[ 4.131911] [cpu_freq] INF: voltage = 1150mv frequency = 528MHz
[ 4.136965] [cpu_freq] INF: voltage = 1100mv frequency = 312MHz
[ 4.142009] [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
[ 4.147064] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[ 4.152887] [cpu_freq] INF:-----------------------------------------------
[ 4.162631] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
[ 4.166546] registered taskstats version 1
[ 4.170835] I2C: i2c-4: HDMI I2C adapter
[ 4.269013] cdc_acm 3-1:1.0: ttyACM0: USB ACM device
[ 4.334254] ehci_irq: port change detect
[ 4.394277] The port change to OHCI now!
[ 4.737027] usb 5-1: new full-speed USB device number 2 using sw-ohci
[ 4.970523] [mmc-msg] mmc 0 detect change, present 1
[ 5.469573] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 5.472025] [mmc-msg] sdc0 power on
[ 5.499991] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 5.504901] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 5.577282] [mmc-err] smc 0 err, cmd 52, RTO
[ 5.581447] [mmc-err] smc 0 err, cmd 52, RTO
[ 5.589821] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 5.601247] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 5.606955] [mmc-err] smc 0 err, cmd 5, RTO
[ 5.611020] [mmc-err] smc 0 err, cmd 5, RTO
[ 5.615081] [mmc-err] smc 0 err, cmd 5, RTO
[ 5.619145] [mmc-err] smc 0 err, cmd 5, RTO
[ 5.628166] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 5.636531] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 5.647937] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 5.682844] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 5.691296] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 5.696456] [mmc-msg] sdc0 set round clock 42857143, src 600000000
[ 5.759982] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 5.764451] mmc0: new high speed SDHC card at address 59b4
[ 5.768463] mmcblk0: mmc0:59b4 SDC 7.34 GiB
[ 5.771515] mmcblk0: p1 p2
[ 14.194602] Timeout waiting for EDID info
[ 14.200973] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[ 14.727191] Console: switching to colour frame buffer device 160x45
[ 14.755193] axp20_buck3: incomplete constraints, leaving on
[ 14.760035] axp20_buck2: incomplete constraints, leaving on
[ 14.764760] axp20_ldo4: incomplete constraints, leaving on
[ 14.769507] axp20_ldo3: incomplete constraints, leaving on
[ 14.774228] axp20_ldo2: incomplete constraints, leaving on
[ 14.778966] axp20_ldo1: incomplete constraints, leaving on
[ 14.781920] console [netcon0] enabled
[ 14.785435] netconsole: network logging started
[ 14.789618] otg_wakelock_init: No USB transceiver found
[ 14.797335] sunxi-rtc sunxi-rtc: setting system clock to 2017-01-29 09:35:37 UTC (1485682537)
[ 14.799399] ALSA device list:
[ 14.802454] #0: sunxi-CODEC Audio Codec
[ 14.805640] Freeing init memory: 220K
[ 15.998572] UDF-fs: warning (device mmcblk0p2): udf_fill_super: No partition found (1)
[ 16.007462] device fsid 283aa611-8282-4f40-870e-b2b2fa00944d devid 1 transid 13325 /dev/mmcblk0p2
[ 16.016738] btrfs: disk space caching is enabled
[ 16.038642] Btrfs detected SSD devices, enabling SSD mode
[ 17.094330] btrfs: use ssd allocation scheme
[ 17.098004] btrfs: disk space caching is enabled
[ 19.352178] systemd-udevd[395]: starting version 215
[ 19.461842] i2c /dev entries driver
[ 21.408740] GMAC gpio_power_hd:gpio_direction_output
[ 21.679900] eth0: device MAC address 02:43:05:c1:72:11
[ 21.719518] sunxi_gmac: probed
[ 21.724926] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[ 21.729850] eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[ 23.307320] device fsid 283aa611-8282-4f40-870e-b2b2fa00944d devid 1 transid 13326 /dev/mmcblk0p2
[ 23.318944] device fsid 283aa611-8282-4f40-870e-b2b2fa00944d devid 1 transid 13326 /dev/mmcblk0p2
[ 25.724865] PHY: sunxi_gmac-0:00 - Link is Up - 100/Full
[ 32.314640] eth0: no IPv6 routers present
[ 99.982736] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 100.151327] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 100.155129] NFSD: starting 90-second grace period