Easymouse 2 + HD02 + Fehlermeldung

[JasDA]

Hallo zusammen,

ich habe mir eine HD02 Karte besorgt und sie über Cccam in meiner Solo 2 aktiviert. Dort wird alles hell. Nun versuche ich die Karte in meinem Raspberry mit Oscam und der Easymouse 2 hell zu bekommen.

Die Dipschalter an der Easymouse stehen auf: unten, unten, unten, oben

Meine oscam.server sieht so aus (rsakey und boxkey natürlich vollständig ausgeschrieben)

Spoiler

[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
caid = 1843
rsakey = B...5
boxkey = A...C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

Allerdings erhalte ich beim Start von Oscam die Fehlermeldung "Cardsystem not supported"

Spoiler

2016/06/01 18:28:04 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11232 (arm-linux-gnueabihf) 
2016/06/01 18:28:04 00000000 s (main) System name = Linux 
2016/06/01 18:28:04 00000000 s (main) Host name = raspberrypi 
2016/06/01 18:28:04 00000000 s (main) Release = 3.10.25+ 
2016/06/01 18:28:04 00000000 s (main) Version = #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 
2016/06/01 18:28:04 00000000 s (main) Machine = armv6l 
2016/06/01 18:28:04 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 8442 
2016/06/01 18:28:04 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0 
2016/06/01 18:28:04 00000000 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled 
2016/06/01 18:28:04 00000000 s (main) signal handling initialized 
2016/06/01 18:28:04 00000000 s (config) 56 provid's loaded 
2016/06/01 18:28:04 00000000 s (config) 173 service-id's loaded in 3 ms 
2016/06/01 18:28:04 00000000 s (net) cs378x: initialized (fd=5, port=48148) 
2016/06/01 18:28:04 00000000 s (net) cccam: initialized (fd=6, port=48149) 
2016/06/01 18:28:04 00000000 s (main) Binary without Nagra module - no EMM processing for Nagra possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible! 
2016/06/01 18:28:04 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible! 
2016/06/01 18:28:04 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0 
2016/06/01 18:28:04 00000000 s (main) waiting for local card init 
2016/06/01 18:28:04 6BD54C61 h (webif) webif: decompressed 99398 bytes back into 259072 bytes 
2016/06/01 18:28:04 6BD54C61 h (webif) HTTP Server running. ip=0.0.0.0 port=48150 
2016/06/01 18:28:04 0E1F4D77 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75340 
2016/06/01 18:28:04 0E1F4D77 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 03 time_us 5591 
2016/06/01 18:28:04 0E1F4D77 r (reader) hdplus [mouse] Buffers readed 1 bytes total time_us 81023 
2016/06/01 18:28:04 0E1F4D77 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368) 
2016/06/01 18:28:05 0E1F4D77 r (reader) hdplus [mouse] card detected 
2016/06/01 18:28:05 0E1F4D77 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75208 
2016/06/01 18:28:07 0E1F4D77 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2016/06/01 18:28:07 0E1F4D77 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255 
2016/06/01 18:28:07 0E1F4D77 r (reader) hdplus [mouse] Setting baudrate to 115200 bps 
2016/06/01 18:28:07 0E1F4D77 r (reader) hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368 
2016/06/01 18:28:07 0E1F4D77 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75213 
2016/06/01 18:28:07 0E1F4D77 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz) 
2016/06/01 18:28:07 0E1F4D77 r (reader) hdplus [mouse] Card responded ok for ifsd request of 160 
2016/06/01 18:28:08 0E1F4D77 r (reader) hdplus [mouse] card system not supported 
2016/06/01 18:28:08 0E1F4D77 r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode 
2016/06/01 18:28:08 0E1F4D77 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75219 
2016/06/01 18:28:09 0E1F4D77 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2016/06/01 18:28:09 0E1F4D77 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255 
2016/06/01 18:28:09 0E1F4D77 r (reader) hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368 
2016/06/01 18:28:09 0E1F4D77 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75219 
2016/06/01 18:28:09 0E1F4D77 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz) 
2016/06/01 18:28:11 0E1F4D77 r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160 
2016/06/01 18:28:12 0E1F4D77 r (reader) hdplus [mouse] card system not supported 
2016/06/01 18:28:12 0E1F4D77 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 
2016/06/01 18:28:12 0E1F4D77 r (reader) hdplus [mouse] card initializing error

 

[pehedima]

AW: Easymouse 2 + HD02 + Fehlermeldung

Die HD02 ist bisweilen etwas zickig:

Versuche folgende Einstellung:

Easy:

unten, unten, oben, oben

Im Reader

mhz = 600

Die gesamte Raspel neu starten nicht nur oscam.

Dann oscam.log posten.

Welche Stromversorgung nutzt du an der Raspel?

 

[dodo83]

AW: Easymouse 2 + HD02 + Fehlermeldung

stelle doch die Werte passend zur Einstellung der Easymouse

mhz = 357
cardmhz = 357 # kann auch auf 368 bleiben

oscam neu starten

EDIT
oder so wie oben ...

 

[JasDA]

AW: Easymouse 2 + HD02 + Fehlermeldung

Als Stromversorgung dient ein 2A Netzteil und es wird nur ein einziger Reader betrieben. Sonst sind keine USB Geräte angeschlossen.

unten, unten, oben, oben und mhz = 600 hat rein gar nichts gebracht.

unten, unten, oben, oben und mhz =357 und cardmhz = 357 führt zu einem neuen Fehler:

2016/06/01 19:05:36 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11232 (arm-linux-gnueabihf) 
2016/06/01 19:05:36 00000000 s (main) System name = Linux 
2016/06/01 19:05:36 00000000 s (main) Host name = raspberrypi 
2016/06/01 19:05:36 00000000 s (main) Release = 3.10.25+ 
2016/06/01 19:05:36 00000000 s (main) Version = #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 
2016/06/01 19:05:36 00000000 s (main) Machine = armv6l 
2016/06/01 19:05:36 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2295 
2016/06/01 19:05:36 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0 
2016/06/01 19:05:36 00000000 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled 
2016/06/01 19:05:36 00000000 s (main) signal handling initialized 
2016/06/01 19:05:36 00000000 s (config) 56 provid's loaded 
2016/06/01 19:05:36 00000000 s (config) 173 service-id's loaded in 2 ms 
2016/06/01 19:05:36 00000000 s (net) cs378x: initialized (fd=5, port=48148) 
2016/06/01 19:05:36 00000000 s (net) cccam: initialized (fd=6, port=48149) 
2016/06/01 19:05:36 00000000 s (main) Binary without Nagra module - no EMM processing for Nagra possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible! 
2016/06/01 19:05:36 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible! 
2016/06/01 19:05:36 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0 
2016/06/01 19:05:36 00000000 s (main) waiting for local card init 
2016/06/01 19:05:36 745848DF h (webif) webif: decompressed 99398 bytes back into 259072 bytes 
2016/06/01 19:05:36 745848DF h (webif) HTTP Server running. ip=0.0.0.0 port=48150 
2016/06/01 19:05:36 05A874E7 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75302 
2016/06/01 19:05:36 05A874E7 r (reader) hdplus [mouse] Flush readed byte Nr 1 value f1 time_us 4025 
2016/06/01 19:05:36 05A874E7 r (reader) hdplus [mouse] Buffers readed 1 bytes total time_us 79454 
2016/06/01 19:05:36 05A874E7 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357) 
2016/06/01 19:05:37 05A874E7 r (reader) hdplus [mouse] card detected 
2016/06/01 19:05:37 05A874E7 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75205 
2016/06/01 19:05:38 05A874E7 r (reader) hdplus [mouse] ATR: F1 F0 FD FF 70 FB 7C F6 FE DE F4 ED AF EF 5F F4 FD FB 
2016/06/01 19:05:38 05A874E7 r (reader) hdplus [mouse] ERROR: Could not read reader->convention 
2016/06/01 19:05:38 05A874E7 r (reader) hdplus [mouse] Error activating card. 
2016/06/01 19:05:39 05A874E7 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75205 
2016/06/01 19:05:40 05A874E7 r (reader) hdplus [mouse] ATR: F1 F0 FD FF 70 FB 7C F6 FE DE F4 ED AF EF 5F F4 FD FB 
2016/06/01 19:05:40 05A874E7 r (reader) hdplus [mouse] ERROR: Could not read reader->convention 
2016/06/01 19:05:40 05A874E7 r (reader) hdplus [mouse] Error activating card. 
2016/06/01 19:05:41 05A874E7 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75212 
2016/06/01 19:05:42 05A874E7 r (reader) hdplus [mouse] ATR: F1 F0 FD FF 70 FB 7C F6 FE DE F4 ED AF EF 5F F4 FD FB 
2016/06/01 19:05:42 05A874E7 r (reader) hdplus [mouse] ERROR: Could not read reader->convention 
2016/06/01 19:05:42 05A874E7 r (reader) hdplus [mouse] Error activating card. 
2016/06/01 19:05:42 05A874E7 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 
2016/06/01 19:05:42 05A874E7 r (reader) hdplus [mouse] card initializing error

 

[dodo83]

AW: Easymouse 2 + HD02 + Fehlermeldung

unten, unten, oben, oben und mhz =357 und cardmhz = 357 führt zu einem neuen Fehler:

da der Takt der Maus zur Einstellung dann nicht passt, ich habe nicht geschrieben das du die Dip Schalter ändern sollst...
wenn du im Reader 357 stehen hast muss die Maus auf unten unten unten stehen

 

[JasDA]

AW: Easymouse 2 + HD02 + Fehlermeldung

Jetzt hab ich gleich alles durch :emoticon-0175-drunk

mhz = 357 und cardmhz = 357, unten, unten, unten

Fehler: Card System not Supported

mhz = 357 und cardmhz = 357, unten, oben, unten (so stehts im Zebra Wiki)

Fehler: Error activating card

2016/06/01 19:01:16 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11232 (arm-linux-gnueabihf) 
2016/06/01 19:01:16 00000000 s (main) System name = Linux 
2016/06/01 19:01:16 00000000 s (main) Host name = raspberrypi 
2016/06/01 19:01:16 00000000 s (main) Release = 3.10.25+ 
2016/06/01 19:01:16 00000000 s (main) Version = #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 
2016/06/01 19:01:16 00000000 s (main) Machine = armv6l 
2016/06/01 19:01:16 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2162 
2016/06/01 19:01:16 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0 
2016/06/01 19:01:16 00000000 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled 
2016/06/01 19:01:16 00000000 s (main) signal handling initialized 
2016/06/01 19:01:16 00000000 s (config) 56 provid's loaded 
2016/06/01 19:01:16 00000000 s (config) 173 service-id's loaded in 6 ms 
2016/06/01 19:01:16 00000000 s (net) cs378x: initialized (fd=5, port=48148) 
2016/06/01 19:01:16 00000000 s (net) cccam: initialized (fd=6, port=48149) 
2016/06/01 19:01:16 00000000 s (main) Binary without Nagra module - no EMM processing for Nagra possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible! 
2016/06/01 19:01:16 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible! 
2016/06/01 19:01:16 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0 
2016/06/01 19:01:16 00000000 s (main) waiting for local card init 
2016/06/01 19:01:16 3010D908 h (webif) webif: decompressed 99398 bytes back into 259072 bytes 
2016/06/01 19:01:16 3010D908 h (webif) HTTP Server running. ip=0.0.0.0 port=48150 
2016/06/01 19:01:16 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75329 
2016/06/01 19:01:17 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75218 
2016/06/01 19:01:17 74EECD97 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357) 
2016/06/01 19:01:17 74EECD97 r (reader) hdplus [mouse] card detected 
2016/06/01 19:01:17 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75211 
2016/06/01 19:01:19 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75219 
2016/06/01 19:01:20 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75207 
2016/06/01 19:01:21 74EECD97 r (reader) hdplus [mouse] Error activating card. 
2016/06/01 19:01:22 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75210 
2016/06/01 19:13:26 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75195 
2016/06/01 19:13:27 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75192 
2016/06/01 19:13:28 74EECD97 r (reader) hdplus [mouse] Error activating card. 
2016/06/01 19:13:29 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75282 
2016/06/01 19:13:30 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75235 
2016/06/01 19:13:31 74EECD97 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75222 
2016/06/01 19:13:32 74EECD97 r (reader) hdplus [mouse] Error activating card.

 

[pehedima]

AW: Easymouse 2 + HD02 + Fehlermeldung

unten, unten, oben, oben und mhz = 600 hat rein gar nichts gebracht.

Was soll das heißen?

Poste bitte das entsprechende Logfile dazu.

 

[4gx35]

AW: Easymouse 2 + HD02 + Fehlermeldung

hast du überhaupt die oscam version selbst kompiliert ?

 

[Tec-Hi]

AW: Easymouse 2 + HD02 + Fehlermeldung

Hi

hätte gedacht, das es am folgendem liegt:

2016/06/01 18:28:04 00000000 s (main) Binary [B][I][COLOR="#EE82EE"]without Nagra[/COLOR][/I][/B] module - no EMM processing for Nagra possible!

HF

 

[dodo83]

AW: Easymouse 2 + HD02 + Fehlermeldung

das bezieht sich nur auf EMM ....

 

[4gx35]

AW: Easymouse 2 + HD02 + Fehlermeldung

weil kein receiver ?
habe schon länger keine ipc oscam mehr kompiliert

 

[JasDA]

AW: Easymouse 2 + HD02 + Fehlermeldung

Oscam ist selbst kompiliert, darin lief bis vor ein paar Tagen ja noch meine V14

Neuer Versuch: unten, unten, oben, oben
mhz = 600
cardmhz = 368

Spoiler

2016/06/01 19:30:40 00000000 s (main) Host name = raspberrypi 
2016/06/01 19:30:40 00000000 s (main) Release = 3.10.25+ 
2016/06/01 19:30:40 00000000 s (main) Version = #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 
2016/06/01 19:30:40 00000000 s (main) Machine = armv6l 
2016/06/01 19:30:40 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3764 
2016/06/01 19:30:40 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0 
2016/06/01 19:30:40 00000000 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled 
2016/06/01 19:30:40 00000000 s (main) signal handling initialized 
2016/06/01 19:30:40 00000000 s (config) 56 provid's loaded 
2016/06/01 19:30:40 00000000 s (config) 173 service-id's loaded in 4 ms 
2016/06/01 19:30:40 00000000 s (net) cs378x: initialized (fd=5, port=48148) 
2016/06/01 19:30:40 00000000 s (net) cccam: initialized (fd=6, port=48149) 
2016/06/01 19:30:40 00000000 s (main) Binary without Nagra module - no EMM processing for Nagra possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible! 
2016/06/01 19:30:40 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible! 
2016/06/01 19:30:40 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0 
2016/06/01 19:30:40 00000000 s (main) waiting for local card init 
2016/06/01 19:30:40 49D703E2 h (webif) webif: decompressed 99398 bytes back into 259072 bytes 
2016/06/01 19:30:40 49D703E2 h (webif) HTTP Server running. ip=0.0.0.0 port=48150 
2016/06/01 19:30:40 03053CE2 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75292 
2016/06/01 19:30:40 03053CE2 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 03 time_us 3223 
2016/06/01 19:30:40 03053CE2 r (reader) hdplus [mouse] Buffers readed 1 bytes total time_us 78644 
2016/06/01 19:30:40 03053CE2 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=368) 
2016/06/01 19:30:41 03053CE2 r (reader) hdplus [mouse] card detected 
2016/06/01 19:30:41 03053CE2 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75207 
2016/06/01 19:30:42 03053CE2 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2016/06/01 19:30:42 03053CE2 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255 
2016/06/01 19:30:42 03053CE2 r (reader) hdplus [mouse] Setting baudrate to 115200 bps 
2016/06/01 19:30:42 03053CE2 r (reader) hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600 
2016/06/01 19:30:42 03053CE2 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75210 
2016/06/01 19:30:42 03053CE2 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz) 
2016/06/01 19:30:42 03053CE2 r (reader) hdplus [mouse] Card responded ok for ifsd request of 160 
2016/06/01 19:30:43 03053CE2 r (reader) hdplus [mouse] card system not supported 
2016/06/01 19:30:43 03053CE2 r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode 
2016/06/01 19:30:43 03053CE2 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75201 
2016/06/01 19:30:45 03053CE2 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
2016/06/01 19:30:45 03053CE2 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255 
2016/06/01 19:30:45 03053CE2 r (reader) hdplus [mouse] Calculated work ETU is 62.00 us reader mhz = 600 
2016/06/01 19:30:45 03053CE2 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75194 
2016/06/01 19:30:45 03053CE2 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz) 
2016/06/01 19:30:46 03053CE2 r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 160 
2016/06/01 19:30:47 03053CE2 r (reader) hdplus [mouse] card system not supported 
2016/06/01 19:30:47 03053CE2 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 
2016/06/01 19:30:47 03053CE2 r (reader) hdplus [mouse] card initializing error

 

[Tec-Hi]

AW: Easymouse 2 + HD02 + Fehlermeldung

Hi

Ok, aber füher oder später muss er haben, sonst keine Verlängerung.

HF

 

[dodo83]

AW: Easymouse 2 + HD02 + Fehlermeldung

das Stimmt ...

 

[4gx35]

AW: Easymouse 2 + HD02 + Fehlermeldung

sieh mal lieber unter files bei der oscam version nach, ob überhaupt reader support nagra = yes,
scheint ja nur für nds ok zu sein

beim kompilieren kein haken bei nagra gesetzt ?