EasyMouse 2 + hd01 ERROR Intializing !

pillemats · 30. Juni 2014

also es ist anscheinend die mouse weil meine andere maus lüft an alle usb ports mit den o.g. configs....

alle karten laufen in der neuen maus nicht !

also die mouse ist nicht defekt.... bei meinem kumepl geht sie !

ich habe nun folgende einstellungen aber es geht immer noch nicht:

2014/07/05 15:01:13 0 s signal handling initialized
2014/07/05 15:01:13 0 s 1607 service-id's loaded in 7ms
2014/07/05 15:01:13 0 s monitor: initialized (fd=4, port=18878)
2014/07/05 15:01:13 0 s cccam: initialized (fd=5, port=12001)
2014/07/05 15:01:13 0 s hd+ [mouse] creating thread for device /dev/ttyUSB1
2014/07/05 15:01:13 0 s waiting for local card init
2014/07/05 15:01:13 8C30970 h webif: decompressed 150938 bytes back into 358928 bytes
2014/07/05 15:01:13 8C30970 h HTTP Server running. ip=0.0.0.0 port=16002
2014/07/05 15:01:13 8C09F18 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2014/07/05 15:01:14 8C09F18 r hd+ [mouse] card detected
2014/07/05 15:01:18 8C09F18 r hd+ [mouse] Error activating card.
2014/07/05 15:01:26 0 --- Skipped 2 duplicated log lines ---
2014/07/05 15:01:26 8C09F18 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/05 15:01:26 8C09F18 r hd+ [mouse] card initializing error
2014/07/05 15:01:27 0 s init for all local cards done
2014/07/05 15:01:27 0 s anti cascading disabled

[reader]

label = hd+
protocol = mouse
device = /dev/ttyUSB1
caid = 1830
boxkey = A7642F57BCXXXX
rsakey = BF358B5461863130686FC933FXXX
detect = cd
ident = 1830:000000,003411,008011
group = 5
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 300

ich komme echt nicht weiter

bombadil · 5. Juli 2014

AW: EasyMouse 2 + hd01 ERROR Intializing !

Hi,

Cardmhz sollte für die Karte definiert werden (368) damit Oscam nicht den Standard Wert nimmt. Bei mhz den Wert eingeben, der auch an der Maus eingestellt ist.

Grüße
Bombadil

Advocat · 5. Juli 2014

AW: Re: EasyMouse 2 + hd01 ERROR Intializing !

Sind die keys (box und rsa) mit die richtige länge?
boxkey=16
rsakey=128

und gib im reader dazu:
nagra_read = 2

stappoe · 5. Juli 2014

AW: EasyMouse 2 + hd01 ERROR Intializing !

Also meine HD01 läuft mit cardmhz=369 (nicht 368!) und MHz=600 und easymouse auf 6!

pillemats · 5. Juli 2014

also jetzt sind meine configs so

oscam.server

label = hd+
protocol = mouse
device = /dev/ttyUSB1
caid = 1830
boxkey = A7642FXXX
rsakey = BF358B5461863130686FC933FBXXXX
mhz = 357
detect = cd
ident = 1830:000000,003411,008011
group = 5
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 300
nagra_read = 2

geht immer noch nicht....

mouse:
5V, phoenix, 3,57

rsa und boxkey sind richtig, weil ich die aus meiner smargo config genommen habe und da laufen sie auch

Advocat · 5. Juli 2014

AW: Re: EasyMouse 2 + hd01 ERROR Intializing !

Box (nicht nur oscam) restarten!
Und eventuell nagra_read=1 (all records) ändern.

Zawele · 5. Juli 2014

AW: Re: EasyMouse 2 + hd01 ERROR Intializing !

so läuft meine 01

oscam.server

[reader]
label = HD-PLUS-01
description = #0 weiss
enable = 0
protocol = mouse
device = /dev/ttyUSB
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
gbox_group =
gbox_my_password =
readnano =
services =
lb_whitelist_services =
resetcycle = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 1
cacheex_drop_csp = 0
caid = 1830
atr =
boxid =
boxkey = A7xxxxxxxxxxxx
rsakey = BF35xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ins7e =
ins7e11 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 368
cardmhz = 368
ident =
chid =
class =
aeskeys =
group = 6
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 600
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid = 000001
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
ecmunique = 0
srvidholdseconds = 0
cooldown = 0,0

pillemats · 5. Juli 2014

Re: AW: Re: EasyMouse 2 + hd01 ERROR Intializing !

Advocat schrieb:
Box (nicht nur oscam) restarten!
Und eventuell nagra_read=1 (all records) ändern.

meine dips an der mouse sind richtig ? unten unten oben oben

Advocat · 5. Juli 2014

AW: EasyMouse 2 + hd01 ERROR Intializing !

alle 4 unten!

pillemats · 5. Juli 2014

geht immer noch nicht

das gibts doch nicht.... wenn ich meine andere mouse nehme dann geht es mit den configs

- - - - - - - - - -

wenn ich meine redlight in den reader stecke dann auch error

2014/07/05 16:08:19 0 s 1607 service-id's loaded in 7ms
2014/07/05 16:08:19 0 s monitor: initialized (fd=4, port=18878)
2014/07/05 16:08:19 0 s cccam: initialized (fd=5, port=12001)
2014/07/05 16:08:19 0 s redlight_hd [mouse] creating thread for device /dev/ttyUSB0
2014/07/05 16:08:19 0 s waiting for local card init
2014/07/05 16:08:19 8EABB70 h webif: decompressed 150938 bytes back into 358928 bytes
2014/07/05 16:08:19 8EABB70 h HTTP Server running. ip=0.0.0.0 port=16002
2014/07/05 16:08:19 8E66488 r redlight_hd [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/07/05 16:08:20 8E66488 r redlight_hd [mouse] card detected
2014/07/05 16:08:23 8E66488 r redlight_hd [mouse] Error activating card.
2014/07/05 16:08:32 0 --- Skipped 2 duplicated log lines ---
2014/07/05 16:08:32 8E66488 r redlight_hd [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/05 16:08:32 8E66488 r redlight_hd [mouse] card initializing error
2014/07/05 16:08:32 0 s init for all local cards done
2014/07/05 16:08:32 0 s anti cascading disabled

pehedima · 5. Juli 2014

AW: EasyMouse 2 + hd01 ERROR Intializing !

Poste doch mal das Logfile, wenn du während oscam läuft die Karte aus dem Reader ziehst und wieder steckst!

pillemats · 5. Juli 2014

2014/07/05 16:29:39 8C83488 r hd+ [mouse] card detected
2014/07/05 16:29:43 8C83488 r hd+ [mouse] Error activating card.
2014/07/05 16:29:51 0 --- Skipped 2 duplicated log lines ---
2014/07/05 16:29:51 8C83488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/05 16:29:51 8C83488 r hd+ [mouse] card initializing error
2014/07/05 16:30:23 8C83488 r hd+ [mouse] card detected
2014/07/05 16:30:27 8C83488 r hd+ [mouse] Error activating card.

und nochnmal

2014/07/05 16:31:44 8C83488 r hd+ [mouse] card detected
2014/07/05 16:31:47 8C83488 r hd+ [mouse] Error activating card.
2014/07/05 16:31:56 0 --- Skipped 2 duplicated log lines ---
2014/07/05 16:31:56 8C83488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/05 16:31:56 8C83488 r hd+ [mouse] card initializing error
2014/07/05 16:32:15 8C83488 r hd+ [mouse] card detected
2014/07/05 16:32:18 8C83488 r hd+ [mouse] Error activating card.
2014/07/05 16:32:27 0 --- Skipped 2 duplicated log lines ---
2014/07/05 16:32:27 8C83488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/05 16:32:27 8C83488 r hd+ [mouse] card initializing error

dodo83 · 5. Juli 2014

AW: EasyMouse 2 + hd01 ERROR Intializing !

hast schon mal die Maus auf 6MHZ gestellt, also: unten,unten,oben,oben
und im reader mhz = 600

bei der taktung 357 machen manche probleme

pillemats · 5. Juli 2014

Re: AW: EasyMouse 2 + hd01 ERROR Intializing !

hab ich auch gerade versucht.... selber fehler

2014/07/05 16:32:43 0 s monitor: initialized (fd=4, port=18878)
2014/07/05 16:32:43 0 s cccam: initialized (fd=5, port=12001)
2014/07/05 16:32:43 0 s hd+ [mouse] creating thread for device /dev/ttyUSB1
2014/07/05 16:32:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/07/05 16:32:43 0 s waiting for local card init
2014/07/05 16:32:43 A052B68 h webif: decompressed 150938 bytes back into 358928 bytes
2014/07/05 16:32:44 A052B68 h HTTP Server running. ip=0.0.0.0 port=16002
2014/07/05 16:32:44 A00D488 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2014/07/05 16:32:44 A00D488 r hd+ [mouse] card detected
2014/07/05 16:32:48 A00D488 r hd+ [mouse] Error activating card.
2014/07/05 16:36:17 0 --- Skipped 2 duplicated log lines ---
2014/07/05 16:36:17 A00D488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/05 16:36:17 A00D488 r hd+ [mouse] card initializing error
2014/07/05 16:36:18 0 s init for all local cards done
2014/07/05 16:36:18 0 s anti cascading disabled

Advocat · 5. Juli 2014

AW: EasyMouse 2 + hd01 ERROR Intializing !

wenn der "EasyMouse 2" ist am USB Hub, steck es um auf andere Port und pass den "device = /dev/ttyUSB0,1,2 und s.w." an im oscam.services!

EasyMouse 2 + hd01 ERROR Intializing !

pillemats

Guest

bombadil

Advocat

Hacker

stappoe

Ist gelegentlich hier

pillemats

Guest

Advocat

Hacker

Zawele

Newbie

pillemats

Guest

Advocat

Hacker

pillemats

Guest

pehedima

pillemats

Guest

dodo83

pillemats

Guest

Advocat

Hacker

Ähnliche Themen

EasyMouse 2 + hd01 ERROR Intializing !

pillemats

Guest

Hacker

Ist gelegentlich hier

pillemats

Guest

Hacker

Newbie

pillemats

Guest

Hacker

pillemats

Guest

pillemats

Guest

pillemats

Guest

Hacker

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz