EasyMouse 2 + hd01 ERROR Intializing !

[pillemats]

moin leute

ich bekomme immer das hier

Spoiler

• 2014/06/30 20:19:07 926EB78 r hd+ [mouse] Error activating card.
• 2014/06/30 20:19:11 0 --- Skipped 1 duplicated log lines ---
• 2014/06/30 20:19:11 926EB78 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/06/30 20:19:11 926EB78 r hd+ [mouse] card initializing error
• 2014/06/30 20:19:12 0 s init for all local cards done
• 2014/06/30 20:19:12 0 s anti cascading disabled

meine cfg:

Spoiler

[reader]
label = hd+
enable = 1
protocol = mouse
device = /dev/ttyUSB1
detect = CD
group = 3
rsakey = BF358B5461863XXXXX
boxkey = A7XXXXX7C
CAID = 1830
ident = 1830:000000,003411,008011
mhz = 600
#cardmhz = 368
emmcache = 1,3,2
lb_weight = 300
blockemm-g = 1
blockemm-unknown = 1

an der mouse:

Spoiler

5V
Phoenix
pfeil
6mhz

 

[bombadil]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Hi,

ändere im Reader folgende Einstellungen

mhz                           = 600
cardmhz                      = 368

Und stell die Maus auf 6mhz.

Grüße
Bombadil

 

[pillemats]

geht6 nicht.... selber fehler

 

[bombadil]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Hi,

was steht im Log vor dieser Zeile?

• 2014/06/30 20:19:07 926EB78 r hd+ [mouse] Error activating card.

Grüße
Bombadil

 

[pillemats]

das hier

• 2014/06/30 20:38:49 96E8990 r redlight_hd [viaccess] serial: ##########
• 2014/06/30 20:38:49 96E8990 r redlight_hd [viaccess] provider: 1, id: ######################, sa: ########, geo: empty
• 2014/06/30 20:38:50 96E8990 r redlight_hd [viaccess] provider: 2, id: ######################, sa: ########, geo: FF FF FF FF
• 2014/06/30 20:38:50 96E8990 r redlight_hd [viaccess] class: 01, expiry date: 2014/03/07 - 2015/03/06
• 2014/06/30 20:38:51 96E6B68 r hd+ [mouse] Error activating card.
• 2014/06/30 20:38:55 0 --- Skipped 1 duplicated log lines ---
• 2014/06/30 20:38:55 96E6B68 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/06/30 20:38:55 96E6B68 r hd+ [mouse] card initializing error
• 2014/06/30 20:38:56 0 s init for all local cards done
• 2014/06/30 20:38:56 0 s anti cascading disabled

 

[bombadil]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Hi,

stelle mal alle anderen Reader aus und poste alles, was das Log zur HD+ und zu diesem Thread (in rot) gelogt wird

• 2014/06/30 20:38:51 96E6B68 r hd+ [mouse] Error activating card.

Grüße
Bombadil

 

[pillemats]

ok hier

• 2014/06/30 20:47:53 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9782 (i486-linux-gnu)
• 2014/06/30 20:47:53 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6270
• 2014/06/30 20:47:53 0 s services reloaded: 0 services freed, 24 services loaded, rejected 0
• 2014/06/30 20:47:53 0 s userdb reloaded: loaded, 0 expired, 0 disabled
• 2014/06/30 20:47:53 0 s signal handling initialized
• 2014/06/30 20:47:53 0 s 1607 service-id's loaded in 7ms
• 2014/06/30 20:47:53 0 s monitor: initialized (fd=4, port=18878)
• 2014/06/30 20:47:53 0 s cccam: initialized (fd=5, port=12001)
• 2014/06/30 20:47:53 0 s hd+ [mouse] creating thread for device /dev/ttyUSB1
• 2014/06/30 20:47:53 0 s waiting for local card init
• 2014/06/30 20:47:53 96E6B78 h webif: decompressed 150938 bytes back into 358928 bytes
• 2014/06/30 20:47:53 96E6B78 h HTTP Server running. ip=0.0.0.0 port=16002
• 2014/06/30 20:47:53 96A1488 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=368)
• 2014/06/30 20:47:54 96A1488 r hd+ [mouse] card detected
• 2014/06/30 20:47:57 96A1488 r hd+ [mouse] Error activating card.
• 2014/06/30 20:48:06 0 --- Skipped 2 duplicated log lines ---
• 2014/06/30 20:48:06 96A1488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/06/30 20:48:06 96A1488 r hd+ [mouse] card initializing error
• 2014/06/30 20:48:06 0 s init for all local cards done
• 2014/06/30 20:48:06 0 s anti cascading disabled

 

[bombadil]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Dann versuch mal mit mhz = 368 und die Maus auf 3.58 (dritte Schalter unten)

Grüße
Bombadil

 

[pillemats]

hab ich uch gemacht und wieder error

• 2014/06/30 20:51:36 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9782 (i486-linux-gnu)
• 2014/06/30 20:51:36 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2648
• 2014/06/30 20:51:36 0 s services reloaded: 0 services freed, 24 services loaded, rejected 0
• 2014/06/30 20:51:36 0 s userdb reloaded: loaded, 0 expired, 0 disabled
• 2014/06/30 20:51:36 0 s signal handling initialized
• 2014/06/30 20:51:36 0 s 1607 service-id's loaded in 72ms
• 2014/06/30 20:51:36 0 s monitor: initialized (fd=4, port=18878)
• 2014/06/30 20:51:36 0 s cccam: initialized (fd=5, port=12001)
• 2014/06/30 20:51:36 0 s hd+ [mouse] creating thread for device /dev/ttyUSB1
• 2014/06/30 20:51:36 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/06/30 20:51:36 0 s waiting for local card init
• 2014/06/30 20:51:36 832C2B0 h webif: decompressed 150938 bytes back into 358928 bytes
• 2014/06/30 20:51:37 832C2B0 h HTTP Server running. ip=0.0.0.0 port=16002
• 2014/06/30 20:51:37 832A488 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
• 2014/06/30 20:51:37 832A488 r hd+ [mouse] card detected
• 2014/06/30 20:51:41 832A488 r hd+ [mouse] Error activating card.
• 2014/06/30 20:55:02 0 --- Skipped 2 duplicated log lines ---
• 2014/06/30 20:55:02 832A488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/06/30 20:55:02 832A488 r hd+ [mouse] card initializing error
• 2014/06/30 20:55:03 0 s init for all local cards done
• 2014/06/30 20:55:03 0 s anti cascading disabled

 

[bombadil]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Die Karte wird erst gar nicht im Reader erkannt. Richtig rum und bis Anschlag ist sie drin? Der Reader findet keinen Kontakt zu ATR der Karte.

Grüße
Bombadil

 

[pillemats]

ja ist alles richtig drin ! habe alles kontrolliert... woran kann es denn noch liegen ? mein kumpel hat den selben reader mit den selben configs und da geht es

 

[bombadil]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Dann versuche mal seine Maus. Vielleicht defekt? Wackel am Kabel. ;-)

Grüße
Bombadil

 

[pillemats]

hab noch eine zweite mouse da mit ner redlight:

die karte raus und hd01 rein und es geht

die redlight macht nun diesen fehler an port 1

Spoiler

• 2014/06/30 21:15:48 832A488 r redlight_hd [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/06/30 21:15:50 832A488 r redlight_hd [mouse] T1 Resync command error, trying to reactivate!
• 2014/06/30 21:15:51 832A488 r redlight_hd [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2014/06/30 21:15:51 832A488 r redlight_hd [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/06/30 21:15:51 832A488 r redlight_hd [mouse] Setting baudrate to 156250 bps
• 2014/06/30 21:15:51 832A488 r redlight_hd [mouse] Calculated work ETU is 6.40 us reader mhz = 500
• 2014/06/30 21:15:51 832A488 r redlight_hd [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
• 2014/06/30 21:15:52 832A488 r redlight_hd [mouse] Warning: Card returned error on setting ifsd value to 251
• 2014/06/30 21:15:54 832A488 r redlight_hd [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/06/30 21:15:55 832A488 r redlight_hd [mouse] T1 Resync command error, trying to reactivate!
• 2014/06/30 21:15:56 832A488 r redlight_hd [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2014/06/30 21:15:56 832A488 r redlight_hd [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/06/30 21:15:56 832A488 r redlight_hd [mouse] Setting baudrate to 156250 bps
• 2014/06/30 21:15:56 832A488 r redlight_hd [mouse] Calculated work ETU is 6.40 us reader mhz = 500
• 2014/06/30 21:15:56 832A488 r redlight_hd [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
• 2014/06/30 21:15:58 832A488 r redlight_hd [mouse] Warning: Card returned error on setting ifsd value to 251
• 2014/06/30 21:15:58 832A488 r redlight_hd [mouse] card system not supported
• 2014/06/30 21:15:58 832A488 r redlight_hd [mouse] Normal mode failed, reverting to Deprecated Mode
• 2014/06/30 21:15:59 832A488 r redlight_hd [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2014/06/30 21:15:59 832A488 r redlight_hd [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/06/30 21:15:59 832A488 r redlight_hd [mouse] Calculated work ETU is 74.40 us reader mhz = 500
• 2014/06/30 21:15:59 832A488 r redlight_hd [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
• 2014/06/30 21:16:00 832A488 r redlight_hd [mouse] Warning: Card returned error on setting ifsd value to 251
• 2014/06/30 21:16:01 832A488 r redlight_hd [mouse] detect native nagra card
• 2014/06/30 21:16:03 832A488 r redlight_hd [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/06/30 21:16:04 832A488 r redlight_hd [mouse] T1 Resync command error, trying to reactivate!
• 2014/06/30 21:16:05 832A488 r redlight_hd [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2014/06/30 21:16:05 832A488 r redlight_hd [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/06/30 21:16:05 832A488 r redlight_hd [mouse] Setting baudrate to 156250 bps
• 2014/06/30 21:16:05 832A488 r redlight_hd [mouse] Calculated work ETU is 6.40 us reader mhz = 500
• 2014/06/30 21:16:05 832A488 r redlight_hd [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
• 2014/06/30 21:16:07 832A488 r redlight_hd [mouse] Warning: Card returned error on setting ifsd value to 251
• 2014/06/30 21:16:08 832A488 r redlight_hd [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/06/30 21:16:09 832A488 r redlight_hd [mouse] T1 Resync command error, trying to reactivate!
• 2014/06/30 21:16:11 832A488 r redlight_hd [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2014/06/30 21:16:11 832A488 r redlight_hd [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/06/30 21:16:11 832A488 r redlight_hd [mouse] Setting baudrate to 156250 bps
• 2014/06/30 21:16:11 832A488 r redlight_hd [mouse] Calculated work ETU is 6.40 us reader mhz = 500
• 2014/06/30 21:16:11 832A488 r redlight_hd [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
• 2014/06/30 21:16:12 832A488 r redlight_hd [mouse] Warning: Card returned error on setting ifsd value to 251
• 2014/06/30 21:16:12 832A488 r redlight_hd [mouse] card system not supported
• 2014/06/30 21:16:12 832A488 r redlight_hd [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/06/30 21:16:12 832A488 r redlight_hd [mouse] card initializing error

die hd01 geht jetzt an port 0

edit: mit dem selben reder der an port 0 geht funktioniert es an port 1 NICHT !!!

also hat es was mit dem port zu tun.

die reader sind direkt hinten am igel dran !


edit2: jetzt geht er auch an port 1 aber nur mit der einen mouse.... die neue geht an beiden port nicht

 

[bombadil]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Wie erahnt, Maus kaputt. Wann hast du das letzte Mal die Oscam upgedatet?

Grüße
Bombadil

 

[schetin]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Also meine läuft mit deinen Mouse-Einstellungen (unten,unten,oben,oben) und

Spoiler

[reader]
label = hdplus [COLOR=#ff0000]# mußt du für au anpassen[/COLOR]
protocol = mouse
device = /dev/HD01 [COLOR=#ff0000]# habs per udev eingebunden[/COLOR]
services = hdplus
caid = 1830
boxkey = ?
rsakey = ?
ecmwhitelist = 1830:92
ecmheaderwhitelist = 80308F078D,81308F078D
detect = cd
nagra_read = 2
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1

und dann halt die services für hd plus