EasyMouse 2 + hd01 ERROR Intializing !

[pillemats]

also es ist anscheinend die mouse weil meine andere maus lüft an alle usb ports mit den o.g. configs....

alle karten laufen in der neuen maus nicht !

also die mouse ist nicht defekt.... bei meinem kumepl geht sie !

ich habe nun folgende einstellungen aber es geht immer noch nicht:

Spoiler

• 2014/07/05 15:01:13 0 s signal handling initialized
• 2014/07/05 15:01:13 0 s 1607 service-id's loaded in 7ms
• 2014/07/05 15:01:13 0 s monitor: initialized (fd=4, port=18878)
• 2014/07/05 15:01:13 0 s cccam: initialized (fd=5, port=12001)
• 2014/07/05 15:01:13 0 s hd+ [mouse] creating thread for device /dev/ttyUSB1
• 2014/07/05 15:01:13 0 s waiting for local card init
• 2014/07/05 15:01:13 8C30970 h webif: decompressed 150938 bytes back into 358928 bytes
• 2014/07/05 15:01:13 8C30970 h HTTP Server running. ip=0.0.0.0 port=16002
• 2014/07/05 15:01:13 8C09F18 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
• 2014/07/05 15:01:14 8C09F18 r hd+ [mouse] card detected
• 2014/07/05 15:01:18 8C09F18 r hd+ [mouse] Error activating card.
• 2014/07/05 15:01:26 0 --- Skipped 2 duplicated log lines ---
• 2014/07/05 15:01:26 8C09F18 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/07/05 15:01:26 8C09F18 r hd+ [mouse] card initializing error
• 2014/07/05 15:01:27 0 s init for all local cards done
• 2014/07/05 15:01:27 0 s anti cascading disabled

[reader]

Spoiler

label = hd+
protocol = mouse
device = /dev/ttyUSB1
caid = 1830
boxkey = A7642F57BCXXXX
rsakey = BF358B5461863130686FC933FXXX
detect = cd
ident = 1830:000000,003411,008011
group = 5
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 300

ich komme echt nicht weiter

 

[bombadil]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Hi,

Cardmhz sollte für die Karte definiert werden (368) damit Oscam nicht den Standard Wert nimmt. Bei mhz den Wert eingeben, der auch an der Maus eingestellt ist.

Grüße
Bombadil

 

[Advocat]

AW: Re: EasyMouse 2 + hd01 ERROR Intializing !

Sind die keys (box und rsa) mit die richtige länge?
boxkey=16
rsakey=128

und gib im reader dazu:
nagra_read = 2

 

[stappoe]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Also meine HD01 läuft mit cardmhz=369 (nicht 368!) und MHz=600 und easymouse auf 6!

 

[pillemats]

also jetzt sind meine configs so

oscam.server

Spoiler

label = hd+
protocol = mouse
device = /dev/ttyUSB1
caid = 1830
boxkey = A7642FXXX
rsakey = BF358B5461863130686FC933FBXXXX
mhz = 357
detect = cd
ident = 1830:000000,003411,008011
group = 5
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 300
nagra_read = 2

geht immer noch nicht....

mouse:
5V, phoenix, 3,57

rsa und boxkey sind richtig, weil ich die aus meiner smargo config genommen habe und da laufen sie auch

 

[Advocat]

AW: Re: EasyMouse 2 + hd01 ERROR Intializing !

Box (nicht nur oscam) restarten!
Und eventuell nagra_read=1 (all records) ändern.

 

[Zawele]

AW: Re: EasyMouse 2 + hd01 ERROR Intializing !

so läuft meine 01

oscam.server

Spoiler

[reader]
label = HD-PLUS-01
description = #0 weiss
enable = 0
protocol = mouse
device = /dev/ttyUSB
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
gbox_group =
gbox_my_password =
readnano =
services =
lb_whitelist_services =
resetcycle = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 1
cacheex_drop_csp = 0
caid = 1830
atr =
boxid =
boxkey = A7xxxxxxxxxxxx
rsakey = BF35xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ins7e =
ins7e11 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 368
cardmhz = 368
ident =
chid =
class =
aeskeys =
group = 6
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 600
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid = 000001
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
ecmunique = 0
srvidholdseconds = 0
cooldown = 0,0

 

[pillemats]

Re: AW: Re: EasyMouse 2 + hd01 ERROR Intializing !

Box (nicht nur oscam) restarten!
Und eventuell nagra_read=1 (all records) ändern.

meine dips an der mouse sind richtig ? unten unten oben oben

 

[Advocat]

AW: EasyMouse 2 + hd01 ERROR Intializing !

alle 4 unten!

 

[pillemats]

geht immer noch nicht


das gibts doch nicht.... wenn ich meine andere mouse nehme dann geht es mit den configs

- - - - - - - - - -

wenn ich meine redlight in den reader stecke dann auch error

Spoiler

• 2014/07/05 16:08:19 0 s 1607 service-id's loaded in 7ms
• 2014/07/05 16:08:19 0 s monitor: initialized (fd=4, port=18878)
• 2014/07/05 16:08:19 0 s cccam: initialized (fd=5, port=12001)
• 2014/07/05 16:08:19 0 s redlight_hd [mouse] creating thread for device /dev/ttyUSB0
• 2014/07/05 16:08:19 0 s waiting for local card init
• 2014/07/05 16:08:19 8EABB70 h webif: decompressed 150938 bytes back into 358928 bytes
• 2014/07/05 16:08:19 8EABB70 h HTTP Server running. ip=0.0.0.0 port=16002
• 2014/07/05 16:08:19 8E66488 r redlight_hd [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2014/07/05 16:08:20 8E66488 r redlight_hd [mouse] card detected
• 2014/07/05 16:08:23 8E66488 r redlight_hd [mouse] Error activating card.
• 2014/07/05 16:08:32 0 --- Skipped 2 duplicated log lines ---
• 2014/07/05 16:08:32 8E66488 r redlight_hd [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/07/05 16:08:32 8E66488 r redlight_hd [mouse] card initializing error
• 2014/07/05 16:08:32 0 s init for all local cards done
• 2014/07/05 16:08:32 0 s anti cascading disabled

 

[pehedima]

AW: EasyMouse 2 + hd01 ERROR Intializing !

Poste doch mal das Logfile, wenn du während oscam läuft die Karte aus dem Reader ziehst und wieder steckst!

 

[pillemats]

Spoiler

• 2014/07/05 16:29:39 8C83488 r hd+ [mouse] card detected
• 2014/07/05 16:29:43 8C83488 r hd+ [mouse] Error activating card.
• 2014/07/05 16:29:51 0 --- Skipped 2 duplicated log lines ---
• 2014/07/05 16:29:51 8C83488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/07/05 16:29:51 8C83488 r hd+ [mouse] card initializing error
• 2014/07/05 16:30:23 8C83488 r hd+ [mouse] card detected
• 2014/07/05 16:30:27 8C83488 r hd+ [mouse] Error activating card.

und nochnmal

Spoiler

• 2014/07/05 16:31:44 8C83488 r hd+ [mouse] card detected
• 2014/07/05 16:31:47 8C83488 r hd+ [mouse] Error activating card.
• 2014/07/05 16:31:56 0 --- Skipped 2 duplicated log lines ---
• 2014/07/05 16:31:56 8C83488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/07/05 16:31:56 8C83488 r hd+ [mouse] card initializing error
• 2014/07/05 16:32:15 8C83488 r hd+ [mouse] card detected
• 2014/07/05 16:32:18 8C83488 r hd+ [mouse] Error activating card.
• 2014/07/05 16:32:27 0 --- Skipped 2 duplicated log lines ---
• 2014/07/05 16:32:27 8C83488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/07/05 16:32:27 8C83488 r hd+ [mouse] card initializing error

 

[dodo83]

AW: EasyMouse 2 + hd01 ERROR Intializing !

hast schon mal die Maus auf 6MHZ gestellt, also: unten,unten,oben,oben
und im reader mhz = 600

bei der taktung 357 machen manche probleme

 

[pillemats]

Re: AW: EasyMouse 2 + hd01 ERROR Intializing !

hab ich auch gerade versucht.... selber fehler

2014/07/05 16:32:43 0 s monitor: initialized (fd=4, port=18878)
2014/07/05 16:32:43 0 s cccam: initialized (fd=5, port=12001)
2014/07/05 16:32:43 0 s hd+ [mouse] creating thread for device /dev/ttyUSB1
2014/07/05 16:32:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/07/05 16:32:43 0 s waiting for local card init
2014/07/05 16:32:43 A052B68 h webif: decompressed 150938 bytes back into 358928 bytes
2014/07/05 16:32:44 A052B68 h HTTP Server running. ip=0.0.0.0 port=16002
2014/07/05 16:32:44 A00D488 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2014/07/05 16:32:44 A00D488 r hd+ [mouse] card detected
2014/07/05 16:32:48 A00D488 r hd+ [mouse] Error activating card.
2014/07/05 16:36:17 0 --- Skipped 2 duplicated log lines ---
2014/07/05 16:36:17 A00D488 r hd+ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/05 16:36:17 A00D488 r hd+ [mouse] card initializing error
2014/07/05 16:36:18 0 s init for all local cards done
2014/07/05 16:36:18 0 s anti cascading disabled​

 

[Advocat]

AW: EasyMouse 2 + hd01 ERROR Intializing !

wenn der "EasyMouse 2" ist am USB Hub, steck es um auf andere Port und pass den "device = /dev/ttyUSB0,1,2 und s.w." an im oscam.services!