Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

[cojo]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

wie denn noch,mach es exact so wie es im spoiler steht

 

[MKLST2]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

naja, wenn er Neuling ist versteht er das ganze nicht ohne das man ihm DCC als Programm nennt.


DCC hasts du ja installiert .... verbinde es mit der Box

dann in der Rubrik "telnet" die Befehle wie "init5" eingeben und der Anleitung folgen.

 

[montiee]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

also hab es wie beschrieben gemacht, wo finde ich im Verzeichnis die Logdatei?

 

[MKLST2]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

in DCC mit FTP unter home/root oder tmp

denke ich

 

[montiee]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

so der text besteht auf 147121 zeichen, wie kann ich euch jetzt die datei zu kommen lassen? hier hochlade geht nicht

- - - - - - - - - -

teil 1

Spoiler

Dec 7 22:09:37 dm800se syslog.info syslogd started: BusyBox v1.19.4
Dec 7 22:09:37 dm800se user.notice kernel: klogd started: BusyBox v1.19.4 (2014-01-07 12:10:06 CET)
Dec 7 22:09:37 dm800se user.info kernel: stype=jffs2 rw console=ttyS0,115200 debug bmem=116M@140M
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] Memory: 134932k/262144k available (4743k kernel code, 127212k reserved, 1011k data, 220k init, 0k highmem)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] NR_IRQS:128
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.000000] Measuring MIPS counter frequency...
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] Detected MIPS clock frequency: 405 MHz (202.508 MHz counter)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] Console: colour dummy device 80x25
Dec 7 22:09:37 dm800se user.info kernel: [ 0.000000] Calibrating delay loop... 401.40 BogoMIPS (lpj=200704)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.011000] pid_max: default: 32768 minimum: 301
Dec 7 22:09:37 dm800se user.info kernel: [ 0.012000] Mount-cache hash table entries: 512
Dec 7 22:09:37 dm800se user.info kernel: [ 0.014000] SMP: Booting CPU1...
Dec 7 22:09:37 dm800se user.info kernel: [ 0.015000] CPU revision is: 0002a044 (Brcm4380)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.015000] FPU revision is: 00130001
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.015000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.015000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
Dec 7 22:09:37 dm800se user.info kernel: [ 0.026000] SMP: CPU1 is running
Dec 7 22:09:37 dm800se user.info kernel: [ 0.026000] Brought up 2 CPUs
Dec 7 22:09:37 dm800se user.info kernel: [ 0.027000] devtmpfs: initialized
Dec 7 22:09:37 dm800se user.info kernel: [ 0.031000] NET: Registered protocol family 16
Dec 7 22:09:37 dm800se user.info kernel: [ 0.033000] PCI2.3->SDRAM window: 512 MB
Dec 7 22:09:37 dm800se user.info kernel: [ 0.040000] bio: create slab <bio-0> at 0
Dec 7 22:09:37 dm800se user.notice kernel: [ 0.041000] SCSI subsystem initialized
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.042000] libata version 3.00 loaded.
Dec 7 22:09:37 dm800se user.info kernel: [ 0.042000] usbcore: registered new interface driver usbfs
Dec 7 22:09:37 dm800se user.info kernel: [ 0.043000] usbcore: registered new interface driver hub
Dec 7 22:09:37 dm800se user.info kernel: [ 0.043000] usbcore: registered new device driver usb
Dec 7 22:09:37 dm800se user.info kernel: [ 0.044000] Advanced Linux Sound Architecture Driver Version 1.0.24.
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.045000] pci 0000:01:00.0: [14e4:8602] type 0 class 0x000101
Dec 7 22:09:37 dm800se user.info kernel: [ 0.046000] PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.046000] pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff]
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.047000] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
Dec 7 22:09:37 dm800se user.info kernel: [ 0.048000] pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
Dec 7 22:09:37 dm800se user.info kernel: [ 0.049000] pci 0000:01:00.0: BAR 5: set to [mem 0x10510000-0x10510fff] (PCI address [0x10510000-0x10510fff])
Dec 7 22:09:37 dm800se user.info kernel: [ 0.050000] pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
Dec 7 22:09:37 dm800se user.info kernel: [ 0.051000] Switching to clocksource upg
Dec 7 22:09:37 dm800se user.info kernel: [ 0.066000] NET: Registered protocol family 2
Dec 7 22:09:37 dm800se user.info kernel: [ 0.066000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.068000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.069000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.071000] TCP: Hash tables configured (established 8192 bind 8192)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.071000] TCP reno registered
Dec 7 22:09:37 dm800se user.info kernel: [ 0.072000] UDP hash table entries: 128 (order: 0, 4096 bytes)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.073000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.074000] NET: Registered protocol family 1
Dec 7 22:09:37 dm800se user.info kernel: [ 0.075000] RPC: Registered named UNIX socket transport module.
Dec 7 22:09:37 dm800se user.info kernel: [ 0.076000] RPC: Registered udp transport module.
Dec 7 22:09:37 dm800se user.info kernel: [ 0.076000] RPC: Registered tcp transport module.
Dec 7 22:09:37 dm800se user.info kernel: [ 0.077000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.078000] PCI: CLS 0 bytes, default 64
Dec 7 22:09:37 dm800se user.info kernel: [ 0.081000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Dec 7 22:09:37 dm800se user.info kernel: [ 0.082000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
Dec 7 22:09:37 dm800se user.info kernel: [ 0.084000] SGI XFS with security attributes, large block/inode numbers, no debug enabled
Dec 7 22:09:37 dm800se user.info kernel: [ 0.086000] msgmni has been set to 263
Dec 7 22:09:37 dm800se user.info kernel: [ 0.088000] io scheduler noop registered
Dec 7 22:09:37 dm800se user.info kernel: [ 0.089000] io scheduler cfq registered (default)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.090000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Dec 7 22:09:37 dm800se user.info kernel: [ 0.112000] serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
Dec 7 22:09:37 dm800se user.info kernel: [ 0.113000] console [ttyS0] enabled, bootconsole disabled
Dec 7 22:09:37 dm800se user.info kernel: [ 0.134000] serial8250.0: ttyS1 at MMIO 0x10400b80 (irq = 67) is a 16550A
Dec 7 22:09:37 dm800se user.info kernel: [ 0.141000] loop: module loaded
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.141000] sata_brcmstb 0000:01:00.0: version 4.0
Dec 7 22:09:37 dm800se user.info kernel: [ 0.142000] brcm-pm: enabling sata clocks
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.142000] PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.143000] PCI: Setting latency timer of device 0000:01:00.0 to 64
Dec 7 22:09:37 dm800se user.info kernel: [ 0.340000] scsi0 : sata_brcmstb
Dec 7 22:09:37 dm800se user.info kernel: [ 0.341000] scsi1 : sata_brcmstb
Dec 7 22:09:37 dm800se user.info kernel: [ 0.341000] ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Dec 7 22:09:37 dm800se user.info kernel: [ 0.342000] ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
Dec 7 22:09:37 dm800se user.info kernel: [ 0.344000] Broadcom STB NAND controller (BrcmNand Controller)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.345000] bcmemac: Broadcom STB 10/100 EMAC driver v3.0
Dec 7 22:09:37 dm800se user.info kernel: [ 0.348000] bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:09:34:2c:82:3e)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.350000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 7 22:09:37 dm800se user.info kernel: [ 0.350000] brcm-pm: enabling usb clocks
Dec 7 22:09:37 dm800se user.info kernel: [ 0.351000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
Dec 7 22:09:37 dm800se user.info kernel: [ 0.352000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
Dec 7 22:09:37 dm800se user.info kernel: [ 0.384000] ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
Dec 7 22:09:37 dm800se user.info kernel: [ 0.390000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
Dec 7 22:09:37 dm800se user.info kernel: [ 0.391000] hub 1-0:1.0: USB hub found
Dec 7 22:09:37 dm800se user.info kernel: [ 0.391000] hub 1-0:1.0: 2 ports detected
Dec 7 22:09:37 dm800se user.info kernel: [ 0.392000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
Dec 7 22:09:37 dm800se user.info kernel: [ 0.393000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
Dec 7 22:09:37 dm800se user.info kernel: [ 0.425000] ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
Dec 7 22:09:37 dm800se user.info kernel: [ 0.431000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
Dec 7 22:09:37 dm800se user.info kernel: [ 0.432000] hub 2-0:1.0: USB hub found
Dec 7 22:09:37 dm800se user.info kernel: [ 0.432000] hub 2-0:1.0: 2 ports detected
Dec 7 22:09:37 dm800se user.info kernel: [ 0.433000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 7 22:09:37 dm800se user.info kernel: [ 0.434000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
Dec 7 22:09:37 dm800se user.info kernel: [ 0.435000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
Dec 7 22:09:37 dm800se user.info kernel: [ 0.436000] ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
Dec 7 22:09:37 dm800se user.info kernel: [ 0.501000] hub 3-0:1.0: USB hub found
Dec 7 22:09:37 dm800se user.info kernel: [ 0.502000] hub 3-0:1.0: 2 ports detected
Dec 7 22:09:37 dm800se user.info kernel: [ 0.503000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
Dec 7 22:09:37 dm800se user.info kernel: [ 0.503000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
Dec 7 22:09:37 dm800se user.info kernel: [ 0.504000] ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
Dec 7 22:09:37 dm800se user.info kernel: [ 0.570000] hub 4-0:1.0: USB hub found
Dec 7 22:09:37 dm800se user.info kernel: [ 0.571000] hub 4-0:1.0: 2 ports detected
Dec 7 22:09:37 dm800se user.info kernel: [ 0.572000] Initializing USB Mass Storage driver...
Dec 7 22:09:37 dm800se user.info kernel: [ 0.572000] usbcore: registered new interface driver usb-storage
Dec 7 22:09:37 dm800se user.info kernel: [ 0.573000] USB Mass Storage support registered.
Dec 7 22:09:37 dm800se user.info kernel: [ 0.574000] i2c /dev entries driver
Dec 7 22:09:37 dm800se user.info kernel: [ 0.574000] ALSA device list:
Dec 7 22:09:37 dm800se user.info kernel: [ 0.575000] No soundcards found.
Dec 7 22:09:37 dm800se user.info kernel: [ 0.575000] TCP cubic registered
Dec 7 22:09:37 dm800se user.info kernel: [ 0.576000] NET: Registered protocol family 17
Dec 7 22:09:37 dm800se user.notice kernel: [ 0.576000] Registering the dns_resolver key type
Dec 7 22:09:37 dm800se user.info kernel: [ 0.577000] EBI CS1: setting up NAND flash (primary)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.578000] mtd->oobsize=0, mtd->eccOobSize=0
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.579000] NAND_CS_NAND_XOR=00000000
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.579000] B4: NandSelect=40000202, nandConfig=04042300, chipSelect=1
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.580000] brcmnand_read_id: CS1: dev_id=ad76ad76
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.581000] After: NandSelect=40000202, nandConfig=04042300
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.581000] Block size=00004000, erase shift=14
Dec 7 22:09:37 dm800se user.info kernel: [ 0.582000] NAND Config: Reg=04042300, chipSize=64 MB, blockSize=16K, erase_shift=e
Dec 7 22:09:37 dm800se user.info kernel: [ 0.583000] busWidth=1, pageSize=512B, page_shift=9, page_mask=000001ff
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.584000] timing1 not adjusted: 5363444f
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.584000] timing2 not adjusted: 00000fc6
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.585000] eccLevel=15, 1Ksector=0, oob=16
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.585000] nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.586000] <--brcmnand_set_acccontrol: acc b4: f7ff1010, after: f7ff1010
Dec 7 22:09:37 dm800se user.info kernel: [ 0.587000] BrcmNAND mfg ad 76 Hynix HY27US08121A (dream) 64MB on CS1
Dec 7 22:09:37 dm800se user.info kernel: [ 0.587000]
Dec 7 22:09:37 dm800se user.info kernel: [ 0.587000] Found NAND on CS1: ACC=f7ff1010, cfg=04042300, flashId=ad76ad76, tim1=5363444f, tim2=00000fc6
Dec 7 22:09:37 dm800se user.info kernel: [ 0.589000] BrcmNAND version = 0x0302 64MB @00000000
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.589000] B4: NandSelect=40000202, nandConfig=04042300, chipSelect=1
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.590000] brcmnand_read_id: CS1: dev_id=ad76ad76
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.591000] After: NandSelect=40000202, nandConfig=04042300
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.591000] Found NAND flash on Chip Select 1, chipSize=64MB, usable size=64MB, base=0
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.592000] brcmnand_scan: B4 nand_select = 40000202
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.593000] brcmnand_scan: After nand_select = 40000202
Dec 7 22:09:37 dm800se user.info kernel: [ 0.594000] page_shift=9, bbt_erase_shift=14, chip_shift=26, phys_erase_shift=14
Dec 7 22:09:37 dm800se user.info kernel: [ 0.594000] Brcm NAND controller version = 3.2 NAND flash size 64MB @1c000000
Dec 7 22:09:37 dm800se user.info kernel: [ 0.595000] brcmnand_scan: mtd->oobsize=16
Dec 7 22:09:37 dm800se user.info kernel: [ 0.596000] brcmnand_scan: oobavail=12, eccsize=512, writesize=512
Dec 7 22:09:37 dm800se user.info kernel: [ 0.597000] brcmnand_scan, eccsize=512, writesize=512, eccsteps=1, ecclevel=15, eccbytes=3
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.598000] -->brcmnand_default_bbt
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.598000] brcmnand_default_bbt: bbt_td = bbt_main_descr
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.599000] Bad block table Bbt0 found at page 0001ffe0, version 0x01 for chip on CS1
Dec 7 22:09:37 dm800se user.debug kernel: [ 0.600000] Bad block table 1tbB found at page 0001ffc0, version 0x01 for chip on CS1
Dec 7 22:09:37 dm800se user.info kernel: [ 0.601000] brcmnandCET: Status -> Deferred
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.602000] Adjust partition complete size from 4000000 to 3f00000 to avoid overlap with BBT reserved space
Dec 7 22:09:37 dm800se user.warn kernel: [ 0.603000] Adjust partition root size from 3c00000 to 3b00000 to avoid overlap with BBT reserved space
Dec 7 22:09:37 dm800se user.notice kernel: [ 0.604000] Creating 4 MTD partitions on "brcmnand.0":
Dec 7 22:09:37 dm800se user.notice kernel: [ 0.605000] 0x000000000000-0x000003f00000 : "complete"
Dec 7 22:09:37 dm800se user.notice kernel: [ 0.610000] 0x000000000000-0x000000040000 : "loader"
Dec 7 22:09:37 dm800se user.notice kernel: [ 0.612000] 0x000000040000-0x000000400000 : "boot"
Dec 7 22:09:37 dm800se user.notice kernel: [ 0.614000] 0x000000400000-0x000003f00000 : "root"
Dec 7 22:09:37 dm800se user.info kernel: [ 0.674000] ata1: SATA link down (SStatus 4 SControl 300)
Dec 7 22:09:37 dm800se user.info kernel: [ 0.706000] usb 1-2: new high-speed USB device number 2 using ehci-brcm
Dec 7 22:09:37 dm800se user.info kernel: [ 1.000000] ata2: SATA link down (SStatus 4 SControl 300)
Dec 7 22:09:37 dm800se user.info kernel: [ 1.031000] usb 1-1: new high-speed USB device number 3 using ehci-brcm
Dec 7 22:09:37 dm800se user.info kernel: [ 1.178000] scsi2 : usb-storage 1-1:1.0
Dec 7 22:09:37 dm800se user.notice kernel: [ 3.318000] scsi 2:0:0:0: Direct-Access FLASH Drive SM_USB20 1100 PQ: 0 ANSI: 0 CCS
Dec 7 22:09:37 dm800se user.notice kernel: [ 3.337000] sd 2:0:0:0: [sda] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
Dec 7 22:09:37 dm800se user.notice kernel: [ 3.339000] sd 2:0:0:0: [sda] Write Protect is off
Dec 7 22:09:37 dm800se user.debug kernel: [ 3.340000] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
Dec 7 22:09:37 dm800se user.err kernel: [ 3.341000] sd 2:0:0:0: [sda] No Caching mode page found
Dec 7 22:09:37 dm800se user.err kernel: [ 3.342000] sd 2:0:0:0: [sda] Assuming drive cache: write through
Dec 7 22:09:37 dm800se user.err kernel: [ 3.347000] sd 2:0:0:0: [sda] No Caching mode page found
Dec 7 22:09:37 dm800se user.err kernel: [ 3.348000] sd 2:0:0:0: [sda] Assuming drive cache: write through
Dec 7 22:09:37 dm800se user.info kernel: [ 3.350000] sda: sda1
Dec 7 22:09:37 dm800se user.err kernel: [ 3.353000] sd 2:0:0:0: [sda] No Caching mode page found
Dec 7 22:09:37 dm800se user.err kernel: [ 3.354000] sd 2:0:0:0: [sda] Assuming drive cache: write through
Dec 7 22:09:37 dm800se user.notice kernel: [ 3.354000] sd 2:0:0:0: [sda] Attached SCSI removable disk
Dec 7 22:09:37 dm800se user.info kernel: [ 7.494000] VFS: Mounted root (jffs2 filesystem) on device 31:3.
Dec 7 22:09:37 dm800se user.info kernel: [ 7.497000] devtmpfs: mounted
Dec 7 22:09:37 dm800se user.info kernel: [ 7.498000] Freeing unused kernel memory: 220k freed
Dec 7 22:09:37 dm800se user.err kernel: 0>[ 10.118000] udevd[101]: starting version 182
Dec 7 22:09:37 dm800se user.warn kernel: [ 10.527000] stb_core: module license 'Proprietary' taints kernel.
Dec 7 22:09:37 dm800se user.warn kernel: [ 10.527000] Disabling lock debugging due to kernel taint
Dec 7 22:09:37 dm800se user.warn kernel: [ 13.808000] enter base init, xvd 20100413, vdc 20100413, rap 20100719, xpt 20110228
Dec 7 22:09:37 dm800se user.err kernel: [ 14.285000] 14:284008330 SMCA: controller reset timed out
Dec 7 22:09:37 dm800se user.err kernel: [ 14.295000] 14:294004764 SMCB: controller reset timed out
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.301000] register adapter
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.302000] register adapter
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.303000] register adapter
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.304000] register adapter
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.310000] FP Version 3
Dec 7 22:09:37 dm800se user.info kernel: [ 14.311000] input: dreambox front panel as /devices/virtual/input/input0
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.320000] set sb to 3(2)
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.320000] set fb to 2(-1)
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.321000] set input to 0
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.321000] set fb to 2(-1)
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.324000] bcm_video_analog_port_setup (fmt=7)
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.324000] SET FORMAT: display[1], format=7
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.325000] display 0 uses vbi path 1
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.326000] display 1 uses vbi path 0
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.327000] HDMI: now connected
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.366000] HDMI: EDID read ok
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.367000] HDMI: initial mode set!
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.367000] using 50.00Hz as MonitorRefreshRate
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.368000] SET FORMAT: display[0], format=37
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.368000] HDMI mode
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.369000] use EDID to detect colorspace
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.369000] using colorspace: 1
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.393000] HDMI: use logical CEC address 3
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.425000] set fb to 2(0)
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.425000] bcm_video_analog_port_setup (fmt=7)
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.426000] SET FORMAT: display[1], format=7
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.430000] disable wss on display 0
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.431000] disable wss on display 1
Dec 7 22:09:37 dm800se user.info kernel: [ 14.432000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.530000] CEC send ok!
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.564000] enable mad
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.610000] VIDEO0: set fallback framerate to 60000
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.611000] VIDEO0: set progressive override mode to 1
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.612000] VIDEO0: set streamtype!
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.612000] set MPEG2
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.612000] sw rave disabled!
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.616000] sync is off so we enable it
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.617000] playback!
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.617000] total video delay: 0 (0 ms)
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.621000] VIDEO0: start decode
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.621000] flush video decoder
Dec 7 22:09:37 dm800se user.warn kernel: [ 14.622000] VIDEO0 got pts failed !!!! (ret 0)
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.026000] CEC recv ok!
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.026000] set ac3 to downmix
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.026000] set ac3plus to use_hdmi_caps
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.026000] set aac to downmix
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.026000] init ALSA!
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.031000] CEC recv ok!
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.050000] VIDEO0: first pts 0x0
Dec 7 22:09:37 dm800se user.info kernel: [ 16.085000] DVB: registering new adapter (BCM7405)
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.107000] autodetecting NIMs...
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.109000] ret: 2, feid: 13
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.109000] Found: Slot A, ID: 13 (by CA)
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.109000] Initializing adapter 0 (BCM4505-DVB-S2)
Dec 7 22:09:37 dm800se user.info kernel: [ 16.173000] bcm4506: found 4505, revision 0(b0)
Dec 7 22:09:37 dm800se user.info kernel: [ 16.173000] bcm4506: bcm_initAP
Dec 7 22:09:37 dm800se user.info kernel: [ 16.180000] bcm4506: upload & start firmware
Dec 7 22:09:37 dm800se user.warn kernel: [ 16.200000] enable tsm0
Dec 7 22:09:37 dm800se user.info kernel: [ 18.204000] bcm4506: bcm4506: ap not running - start now
Dec 7 22:09:37 dm800se user.info kernel: [ 18.254000] bcm4506: uCode 0x61
Dec 7 22:09:37 dm800se user.err kernel: [ 18.273000] bcm4506: no bcm3445 detected
Dec 7 22:09:37 dm800se user.warn kernel: [ 18.286000] i2c_enable_adc failed! -145
Dec 7 22:09:37 dm800se user.warn kernel: [ 18.286000] DVB: registering adapter 0 frontend 0 (bcm4506)...
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.650000] VIDEO0: stop decode
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.650000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.653000] registered vtuner misc/vtuner0, minor 56
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.658000] registered vtuner misc/vtuner1, minor 55
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.810000] VIDEO0: set blank to 0
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.811000] sync is off so we enable it
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.812000] playback!
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.812000] total video delay: 0 (0 ms)
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.816000] VIDEO0: start decode
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.817000] flush video decoder
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.850000] VIDEO0: first pts 0x0
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.850000] VIDEO0: framerate changed 3
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.851000] VIDEO0: resolution changed (1280 720)
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.851000] VIDEO0: aspect changed 3
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.870000] set current avs auto aspect to 16:9
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.871000] disable wss on display 0
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.871000] disable wss on display 1
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.872000] set current avs auto aspect to 16:9
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.872000] disable wss on display 0
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.873000] disable wss on display 1
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.873000] set sb to 3(1)
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.973000] VIDEO0: set blank to 0
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.974000] VIDEO0: stop decode
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.975000] VIDEO0: set blank to 0
Dec 7 22:09:37 dm800se user.warn kernel: [ 19.975000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:09:37 dm800se user.info kernel: [ 22.460000] input: dreambox remote control (native) as /devices/virtual/input/input1
Dec 7 22:09:37 dm800se user.info kernel: [ 22.462000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
Dec 7 22:09:37 dm800se user.info kernel: [ 22.471000] input: dreambox ir keyboard as /devices/virtual/input/input3
Dec 7 22:09:37 dm800se user.info kernel: [ 22.475000] input: dreambox ir mouse as /devices/virtual/input/input4
Dec 7 22:09:37 dm800se user.warn kernel: [ 22.492000] 4017459 ms:
Dec 7 22:09:37 dm800se user.warn kernel: [ 22.574000] 82 ms: 13
Dec 7 22:09:37 dm800se user.info kernel: [ 23.106000] kjournald starting. Commit interval 5 seconds
Dec 7 22:09:37 dm800se user.info kernel: [ 23.111000] EXT3-fs (sda1): using internal journal
Dec 7 22:09:37 dm800se user.info kernel: [ 23.111000] EXT3-fs (sda1): mounted filesystem with writeback data mode
Dec 7 22:09:37 dm800se user.warn kernel: [ 23.124000] 550 ms: 15
Dec 7 22:09:37 dm800se user.warn kernel: [ 23.597000] 472 ms: 17
Dec 7 22:09:37 dm800se user.warn kernel: [ 23.665000] 68 ms: 19
Dec 7 22:09:37 dm800se user.warn kernel: [ 23.705000] 40 ms: 21
Dec 7 22:09:37 dm800se user.warn kernel: [ 25.595000] 1889 ms: 23
Dec 7 22:09:37 dm800se user.warn kernel: [ 25.788000] 192 ms: 25
Dec 7 22:09:37 dm800se user.warn kernel: [ 25.848000] 60 ms: 27
Dec 7 22:09:37 dm800se user.warn kernel: [ 25.916000] 67 ms: 29
Dec 7 22:09:37 dm800se user.warn kernel: [ 25.967000] 51 ms: 31
Dec 7 22:09:37 dm800se user.warn kernel: [ 26.568000] 600 ms: 33
Dec 7 22:09:37 dm800se user.warn kernel: [ 26.657000] 88 ms: 34
Dec 7 22:09:37 dm800se user.warn kernel: [ 27.561000] 904 ms: 35
Dec 7 22:09:37 dm800se user.warn kernel: [ 27.645000] 84 ms: 36
Dec 7 22:09:37 dm800se user.warn kernel: [ 27.699000] 53 ms: 38
Dec 7 22:09:37 dm800se user.warn kernel: [ 27.743000] 44 ms: 39
Dec 7 22:09:37 dm800se user.warn kernel: [ 27.855000] 111 ms: 40
Dec 7 22:09:37 dm800se user.warn kernel: [ 27.989000] 133 ms: 41
Dec 7 22:09:37 dm800se daemon.debug xinetd[592]: Reading included configuration file: /etc/xinetd.d/busybox-telnetd [file=/etc/xinetd.conf] [line=11]
Dec 7 22:09:37 dm800se daemon.debug xinetd[592]: Reading included configuration file: /etc/xinetd.d/dropbear [file=/etc/xinetd.d/dropbear] [line=7]
Dec 7 22:09:37 dm800se daemon.debug xinetd[592]: Reading included configuration file: /etc/xinetd.d/streamproxy [file=/etc/xinetd.d/streamproxy] [line=8]
Dec 7 22:09:37 dm800se daemon.debug xinetd[592]: Reading included configuration file: /etc/xinetd.d/vsftpd [file=/etc/xinetd.d/vsftpd] [line=10]
Dec 7 22:09:37 dm800se daemon.notice xinetd[592]: xinetd Version 2.3.15 started with no options compiled in.
Dec 7 22:09:37 dm800se daemon.notice xinetd[592]: Started working: 4 available services
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Found user 'avahi' (UID 997) and group 'avahi' (GID 996).
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Successfully dropped root privileges.
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: avahi-daemon 0.6.31 starting up.
Dec 7 22:09:38 dm800se daemon.warn avahi-daemon[599]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Successfully called chroot().
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Successfully dropped remaining capabilities.
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Loading service file /services/sftp-ssh.service.
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Loading service file /services/ssh.service.
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.178.30.
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: New relevant interface eth0.IPv4 for mDNS.
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Network interface enumeration completed.
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Registering new address record for 192.168.178.30 on eth0.IPv4.
Dec 7 22:09:38 dm800se daemon.info avahi-daemon[599]: Registering HINFO record with values 'MIPS'/'LINUX'.
Dec 7 22:09:38 dm800se user.warn kernel: [ 28.427000] 438 ms: 43
Dec 7 22:09:39 dm800se daemon.info avahi-daemon[599]: Server startup complete. Host name is dm800se.local. Local service cookie is 831823954.
Dec 7 22:09:40 dm800se daemon.info avahi-daemon[599]: Service "dm800se" (/services/ssh.service) successfully established.
Dec 7 22:09:40 dm800se daemon.info avahi-daemon[599]: Service "dm800se" (/services/sftp-ssh.service) successfully established.
Dec 7 22:09:43 dm800se user.warn kernel: [ 33.862000] 5434 ms: 44
Dec 7 22:09:43 dm800se user.warn kernel: [ 33.925000] 62 ms: 45
Dec 7 22:09:43 dm800se user.info kernel: [ 33.964000] eDaemon uses obsolete (PF_INET,SOCK_PACKET)
Dec 7 22:09:44 dm800se user.warn kernel: [ 34.822000] 897 ms: 46
Dec 7 22:09:44 dm800se daemon.debug CCcam: ======================================================================
Dec 7 22:09:44 dm800se daemon.debug CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08
Dec 7 22:09:44 dm800se daemon.debug CCcam: ======================================================================
Dec 7 22:09:44 dm800se daemon.debug CCcam: online using nodeId 99ed01a2902c492c
Dec 7 22:09:44 dm800se user.warn kernel: [ 34.868000] 46 ms: 48
Dec 7 22:09:44 dm800se user.warn kernel: [ 34.973000] VIDEO0: set blank to 0
Dec 7 22:09:44 dm800se user.warn kernel: [ 34.980000] sync is off so we enable it
Dec 7 22:09:44 dm800se user.warn kernel: [ 34.980000] playback!
Dec 7 22:09:44 dm800se user.warn kernel: [ 34.981000] total video delay: 0 (0 ms)
Dec 7 22:09:44 dm800se user.warn kernel: [ 34.984000] VIDEO0: start decode
Dec 7 22:09:44 dm800se user.warn kernel: [ 34.985000] flush video decoder
Dec 7 22:09:44 dm800se user.warn kernel: [ 35.030000] VIDEO0: first pts 0x0
Dec 7 22:09:44 dm800se user.warn kernel: [ 35.142000] VIDEO0: set blank to 0
Dec 7 22:09:44 dm800se user.warn kernel: [ 35.143000] VIDEO0: stop decode
Dec 7 22:09:44 dm800se user.warn kernel: [ 35.144000] VIDEO0: set blank to 0
Dec 7 22:09:44 dm800se user.warn kernel: [ 35.144000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:09:44 dm800se daemon.debug CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
Dec 7 22:09:44 dm800se daemon.debug CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
Dec 7 22:09:44 dm800se daemon.debug CCcam: static cw not found or bad
Dec 7 22:09:44 dm800se daemon.debug CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
Dec 7 22:09:44 dm800se daemon.debug CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
Dec 7 22:09:44 dm800se daemon.debug CCcam: server started on port 12000
Dec 7 22:09:55 dm800se user.info kernel: [ 46.272000] bcmfb: enable manual blit
Dec 7 22:09:55 dm800se user.info kernel: [ 46.282000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:09:56 dm800se user.info kernel: [ 46.755000] bcm4506: channel 0 is in normale mode now
Dec 7 22:09:56 dm800se user.info kernel: [ 46.768000] bcm4506: channel 0 is sleeping now
Dec 7 22:09:58 dm800se user.info kernel: [ 48.992000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.993000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.993000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.994000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.995000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.995000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.996000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.997000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.997000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.info kernel: [ 48.998000] fe_common: retrying i2c transfer
Dec 7 22:09:58 dm800se user.err kernel: [ 48.999000] fe: read ret=-145
Dec 7 22:09:58 dm800se user.err kernel: [ 48.999000] bcm4506: lnb_sense_i2c_read failed!
Dec 7 22:09:59 dm800se user.info kernel: [ 49.941000] fuse init (API version 7.17)
Dec 7 22:09:59 dm800se daemon.notice automount[673]: >> NTFS signature is missing.
Dec 7 22:09:59 dm800se daemon.notice automount[673]: >> Failed to mount '/dev/sda': Invalid argument
Dec 7 22:09:59 dm800se daemon.notice automount[673]: >> The device '/dev/sda' doesn't seem to have a valid NTFS.
Dec 7 22:09:59 dm800se daemon.notice automount[673]: >> Maybe the wrong device is used? Or the whole disk instead of a
Dec 7 22:09:59 dm800se daemon.notice automount[673]: >> partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Dec 7 22:09:59 dm800se daemon.notice automount[673]: >> mount: mounting /dev/sda on /autofs/sda failed: Device or resource busy
Dec 7 22:09:59 dm800se daemon.err automount[673]: mount(generic): failed to mount /dev/sda (type auto) on /autofs/sda
Dec 7 22:09:59 dm800se daemon.err automount[673]: failed to mount /autofs/sda
Dec 7 22:10:04 dm800se user.info kernel: [ 54.996000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.490000] set current avs auto aspect to 4:3
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.491000] disable wss on display 0
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.491000] disable wss on display 1
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.492000] set sb to 3(2)
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.530000] set current avs auto aspect to 4:3
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.531000] disable wss on display 0
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.531000] disable wss on display 1
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.533000] disable wss on display 0
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.534000] set wss 8 on display 1
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.534000] set sb to 3(2)
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.571000] set input to 0
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.571000] set fb to 2(0)
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.572000] set current avs auto aspect to 4:3
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.572000] disable wss on display 0
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.573000] set wss 8 on display 1
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.574000] set sb to 3(2)
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.578000] set ac3 to downmix
Dec 7 22:10:05 dm800se user.warn kernel: [ 55.581000] set ac3plus to use_hdmi_caps
Dec 7 22:10:13 dm800se user.warn kernel: [ 63.990000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 63.991000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 63.991000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 63.992000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.030000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.031000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.031000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.032000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.033000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.033000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.035000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.036000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.036000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.037000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.041000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.042000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.042000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.043000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.044000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.045000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.045000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.045000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.047000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.047000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.048000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.049000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.049000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.050000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.055000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.055000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.056000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.056000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.058000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.058000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.059000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.059000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.060000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.061000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.062000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.063000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.063000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.064000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.068000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.069000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.069000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.069000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.071000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.072000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.072000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.073000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.074000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.074000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.075000] set current avs auto aspect to 16:9
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.076000] disable wss on display 0
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.077000] set wss 7 on display 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.077000] set sb to 3(1)
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.090000] using 50.00Hz as MonitorRefreshRate
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.190000] SET FORMAT: display[0], format=27
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.191000] HDMI mode
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.191000] use EDID to detect colorspace
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.191000] using colorspace: 1
Dec 7 22:10:13 dm800se user.warn kernel: [ 64.271000] bcm_video_analog_port_setup (fmt=7)
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.390000] SET FORMAT: display[1], format=7
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.511000] set current avs auto aspect to 16:9
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.512000] disable wss on display 0
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.512000] set wss 7 on display 1
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.513000] set sb to 3(1)
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.515000] set current avs auto aspect to 16:9
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.515000] disable wss on display 0
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.516000] set wss 7 on display 1
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.516000] set sb to 3(1)
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.521000] set current avs auto aspect to 16:9
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.522000] disable wss on display 0
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.523000] set wss 7 on display 1
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.523000] set sb to 3(1)
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.524000] set current avs auto aspect to 16:9
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.525000] disable wss on display 0
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.526000] set wss 7 on display 1
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.526000] set sb to 3(1)
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.527000] disable wss on display 0
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.528000] set wss 7 on display 1
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.529000] set current avs auto aspect to 16:9
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.530000] disable wss on display 0
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.531000] set wss 7 on display 1
Dec 7 22:10:14 dm800se user.warn kernel: [ 64.531000] set sb to 3(1)
Dec 7 22:10:18 dm800se user.warn kernel: [ 68.458000] set mute 0 (000) 1

- - - - - - - - - -

teil 2

Dec 7 22:10:22 dm800se user.info kernel: [ 72.491000] fe_common: retrying i2c transfer
Dec 7 22:10:22 dm800se user.info kernel: [ 72.495000] bcm4506: channel 0 is in normale mode now
Dec 7 22:10:22 dm800se user.info kernel: [ 72.536000] bcm4506: signal_strength -289.87dbm
Dec 7 22:10:22 dm800se user.info kernel: [ 72.548000] bcm4506: signal_strength -289.87dbm
Dec 7 22:10:22 dm800se user.info kernel: [ 72.554000] bcm4506: signal_strength -289.87dbm
Dec 7 22:10:22 dm800se user.warn kernel: [ 72.686000] CEC send ok!
Dec 7 22:10:22 dm800se user.warn kernel: [ 72.753000] CEC send ok!
Dec 7 22:10:22 dm800se user.warn kernel: [ 72.872000] CEC send ok!
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.433000] CEC send ok!
Dec 7 22:10:23 dm800se user.info kernel: [ 73.579000] bcm4506: signal_strength -289.87dbm
Dec 7 22:10:23 dm800se user.err kernel: [ 73.933000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.935000] start pcr0 on dmx 3 pid:7ff index 4
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.938000] start audio on dmx 3 pid:800
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.938000] audio xpt start
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.939000] sync is off so we enable it
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.939000] demux-index 3 pcr0pid 7ff
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.940000] using 4 as pcr0 pidchannel
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.941000] MPEG
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.941000] audio: streamtype set 0
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.942000] audio: streamtype_set: stop rave
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.943000] audio: streamtype_set: restart rave
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.943000] set mute 0 (111) 1
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.945000] audio: decoder start 2
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.948000] video delay 0 (0 ms)
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.948000] total video delay: 0 (0 ms)
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.951000] start video0 on dmx 3 pid:7ff
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.951000] total video delay: 0 (0 ms)
Dec 7 22:10:23 dm800se user.warn kernel: [ 73.956000] VIDEO0: start decode
Dec 7 22:10:23 dm800se user.info kernel: [ 74.005000] bcm4506: signal_strength -195.64dbm
Dec 7 22:10:23 dm800se user.info kernel: [ 74.011000] bcm4506: signal_strength -195.64dbm
Dec 7 22:10:23 dm800se user.info kernel: [ 74.016000] bcm4506: signal_strength -195.64dbm
Dec 7 22:10:22 dm800se user.err kernel: [ 74.159000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:10:22 dm800se user.info kernel: [ 74.198000] bcm4506: signal_strength -198.53dbm
Dec 7 22:10:22 dm800se user.info kernel: [ 74.203000] bcm4506: signal_strength -198.53dbm
Dec 7 22:10:22 dm800se user.info kernel: [ 74.208000] bcm4506: signal_strength -198.53dbm
Dec 7 22:10:23 dm800se user.info kernel: [ 74.466000] bcm4506: signal_strength -198.17dbm
Dec 7 22:10:23 dm800se user.info kernel: [ 74.471000] bcm4506: signal_strength -198.17dbm
Dec 7 22:10:23 dm800se user.info kernel: [ 74.583000] bcm4506: signal_strength -198.17dbm
Dec 7 22:10:23 dm800se daemon.debug CCcam: EMM: not interested in 1837:000000
Dec 7 22:10:23 dm800se daemon.debug CCcam: EMM: not interested in 1867:000000
Dec 7 22:10:23 dm800se daemon.debug CCcam: EMM: not interested in 09C4:000000
Dec 7 22:10:23 dm800se daemon.debug CCcam: EMM: not interested in 098C:000000
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.063000] RAP first pts 0x16cece6a, stc 0x15a6dfc6c, pcr valid
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.066000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.070000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.074000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.079000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.083000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.087000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.091000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.095000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.099000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:23 dm800se user.warn kernel: [ 75.103000] audio_cdb_itb_error_isr! underflow
Dec 7 22:10:24 dm800se user.warn kernel: [ 75.441000] ch0: lock
Dec 7 22:10:24 dm800se user.info kernel: [ 75.589000] bcm4506: signal_strength -197.09dbm
Dec 7 22:10:24 dm800se user.warn kernel: [ 75.830000] VIDEO0: first pts 0x15a6f62ee
Dec 7 22:10:24 dm800se user.warn kernel: [ 75.830000] VIDEO0: resolution changed (480 576)
Dec 7 22:10:24 dm800se user.warn kernel: [ 75.982000] enable tsm0
Dec 7 22:10:24 dm800se user.warn kernel: [ 75.990000] VIDEO0: progressive changed (0)
Dec 7 22:10:25 dm800se user.info kernel: [ 76.472000] bcm4506: signal_strength -197.43dbm
Dec 7 22:10:25 dm800se user.info kernel: [ 76.481000] bcm4506: signal_strength -197.43dbm
Dec 7 22:10:25 dm800se user.info kernel: [ 76.593000] bcm4506: signal_strength -197.43dbm
Dec 7 22:10:36 dm800se authpriv.notice login[750]: ROOT LOGIN on '/dev/pts/0' from '192.168.178.20:56555'
Dec 7 22:10:45 dm800se daemon.info init: Switching to runlevel: 5
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.567000] stop pcr0 on dmx 3 pid:7ff
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.569000] stop video0 on dmx 3 pid:7ff
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.570000] VIDEO0: stop decode
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.571000] VIDEO0: set blank to 1
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.573000] audio: decoder stop
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.574000] stop audio on dmx 3 pid:800
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.575000] audio: xpt stop(3)
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.575000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:10:46 dm800se user.warn kernel: [ 97.576000] bcm_audio_channel_stop(3) done
Dec 7 22:10:46 dm800se user.warn kernel: [ 98.256000] 63387 ms: 49
Dec 7 22:10:51 dm800se user.info kernel: [ 102.740000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:10:51 dm800se user.info kernel: [ 102.747000] bcmfb: disable manual blit
Dec 7 22:10:54 dm800se user.info kernel: [ 105.809000] bcm4506: channel 0 is sleeping now
Dec 7 22:11:47 dm800se user.info kernel: [ 158.651000] bcmfb: enable manual blit
Dec 7 22:11:47 dm800se user.info kernel: [ 158.663000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:11:47 dm800se user.info kernel: [ 159.037000] bcm4506: channel 0 is in normale mode now
Dec 7 22:11:47 dm800se user.info kernel: [ 159.050000] bcm4506: channel 0 is sleeping now
Dec 7 22:11:48 dm800se user.warn kernel: [ 159.642000] 61386 ms: 34
Dec 7 22:11:48 dm800se user.warn kernel: [ 159.673000] 31 ms: 50
Dec 7 22:11:48 dm800se user.warn kernel: [ 159.679000] 6 ms: 50
Dec 7 22:11:48 dm800se user.warn kernel: [ 159.690000] 11 ms: 50
Dec 7 22:11:49 dm800se user.warn kernel: [ 161.063000] 1373 ms: 50
Dec 7 22:11:49 dm800se user.info kernel: [ 161.207000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.207000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.208000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.209000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.210000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.210000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.211000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.212000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.212000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.info kernel: [ 161.213000] fe_common: retrying i2c transfer
Dec 7 22:11:49 dm800se user.err kernel: [ 161.214000] fe: read ret=-145
Dec 7 22:11:49 dm800se user.err kernel: [ 161.214000] bcm4506: lnb_sense_i2c_read failed!
Dec 7 22:11:50 dm800se daemon.notice automount[818]: >> NTFS signature is missing.
Dec 7 22:11:50 dm800se daemon.notice automount[818]: >> Failed to mount '/dev/sda': Invalid argument
Dec 7 22:11:50 dm800se daemon.notice automount[818]: >> The device '/dev/sda' doesn't seem to have a valid NTFS.
Dec 7 22:11:50 dm800se daemon.notice automount[818]: >> Maybe the wrong device is used? Or the whole disk instead of a
Dec 7 22:11:50 dm800se daemon.notice automount[818]: >> partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Dec 7 22:11:50 dm800se daemon.notice automount[818]: >> mount: mounting /dev/sda on /autofs/sda failed: Device or resource busy
Dec 7 22:11:50 dm800se daemon.err automount[818]: mount(generic): failed to mount /dev/sda (type auto) on /autofs/sda
Dec 7 22:11:50 dm800se daemon.err automount[818]: failed to mount /autofs/sda
Dec 7 22:11:50 dm800se user.warn kernel: [ 162.117000] 1053 ms: 53
Dec 7 22:11:50 dm800se user.warn kernel: [ 162.145000] 28 ms: 56
Dec 7 22:11:50 dm800se user.warn kernel: [ 162.190000] 44 ms: 56
Dec 7 22:11:50 dm800se user.warn kernel: [ 162.215000] 25 ms: 56
Dec 7 22:11:50 dm800se user.warn kernel: [ 162.217000] 2 ms: 56
Dec 7 22:11:50 dm800se user.warn kernel: [ 162.252000] 35 ms: 56
Dec 7 22:11:51 dm800se user.warn kernel: [ 162.576000] 323 ms: 56
Dec 7 22:11:51 dm800se user.warn kernel: [ 162.731000] 155 ms: 57
Dec 7 22:11:51 dm800se user.warn kernel: [ 162.768000] 37 ms: 58
Dec 7 22:11:51 dm800se user.warn kernel: [ 162.770000] 2 ms: 58
Dec 7 22:11:51 dm800se user.warn kernel: [ 162.772000] 2 ms: 58
Dec 7 22:11:51 dm800se user.warn kernel: [ 163.008000] 236 ms: 58
Dec 7 22:11:51 dm800se user.warn kernel: [ 163.010000] 2 ms: 58
Dec 7 22:11:51 dm800se user.warn kernel: [ 163.126000] 116 ms: 58
Dec 7 22:11:52 dm800se user.warn kernel: [ 163.412000] 286 ms: 58
Dec 7 22:11:52 dm800se user.warn kernel: [ 163.440000] 28 ms: 59
Dec 7 22:11:52 dm800se user.warn kernel: [ 163.455000] 15 ms: 59
Dec 7 22:11:52 dm800se user.warn kernel: [ 163.457000] 1 ms: 59
Dec 7 22:11:52 dm800se user.warn kernel: [ 163.459000] 2 ms: 59
Dec 7 22:11:52 dm800se user.warn kernel: [ 163.476000] 17 ms: 59
Dec 7 22:11:52 dm800se user.warn kernel: [ 163.502000] 25 ms: 59
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.402000] 899 ms: 59
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.430000] 28 ms: 61
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.444000] 13 ms: 61
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.462000] 18 ms: 61
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.512000] 49 ms: 62
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.530000] 18 ms: 62
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.532000] 2 ms: 62
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.535000] 3 ms: 62
Dec 7 22:11:53 dm800se user.warn kernel: [ 164.549000] 14 ms: 62
Dec 7 22:11:54 dm800se user.warn kernel: [ 166.221000] 1672 ms: 62
Dec 7 22:11:54 dm800se user.warn kernel: [ 166.304000] 82 ms: 66
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.417000] 113 ms: 66
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.563000] 145 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.565000] 2 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.615000] 50 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.618000] 2 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.620000] 1 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.627000] 6 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.642000] 15 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.663000] 21 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.665000] 2 ms: 67
Dec 7 22:11:55 dm800se user.info kernel: [ 166.686000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:11:55 dm800se user.warn kernel: [ 166.936000] 271 ms: 67
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.074000] 138 ms: 68
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.148000] set current avs auto aspect to 4:3
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.149000] disable wss on display 0
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.149000] set wss 8 on display 1
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.150000] set sb to 3(2)
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.152000] set current avs auto aspect to 4:3
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.152000] disable wss on display 0
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.153000] set wss 8 on display 1
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.153000] set sb to 3(2)
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.155000] disable wss on display 0
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.156000] set wss 8 on display 1
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.157000] set input to 0
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.157000] set fb to 2(0)
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.158000] set current avs auto aspect to 4:3
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.158000] disable wss on display 0
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.159000] set wss 8 on display 1
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.160000] set sb to 3(2)
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.164000] set ac3 to downmix
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.167000] set ac3plus to use_hdmi_caps
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.174000] 100 ms: 69

- - - - - - - - - -

teil 3

Dec 7 22:11:55 dm800se user.warn kernel: [ 167.184000] 10 ms: 69
Dec 7 22:11:55 dm800se user.warn kernel: [ 167.199000] 15 ms: 69
Dec 7 22:11:56 dm800se user.warn kernel: [ 167.452000] 253 ms: 69
Dec 7 22:11:56 dm800se user.warn kernel: [ 167.482000] 30 ms: 70
Dec 7 22:11:56 dm800se user.warn kernel: [ 167.534000] 51 ms: 70
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.448000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.449000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.449000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.450000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.488000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.489000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.489000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.490000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.491000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.492000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.493000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.494000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.494000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.495000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.500000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.500000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.501000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.501000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.503000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.504000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.504000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.505000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.506000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.507000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.509000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.510000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.510000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.511000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.516000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.516000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.517000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.517000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.521000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.521000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.522000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.522000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.524000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.524000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.526000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.527000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.527000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.528000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.533000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.534000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.534000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.535000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.537000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.537000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.538000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.538000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.540000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.540000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.542000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.543000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.543000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.544000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.550000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.550000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.551000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.551000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.553000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.554000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.554000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.555000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.560000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.561000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.561000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.562000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.564000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.565000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.565000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.566000] set sb to 3(1)
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.568000] disable wss on display 0

 

[MKLST2]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

du hättest es in einen Spoiler kopieren sollen

guck mal die Buttons unter "erweitert" durch

 

[montiee]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

teil 4

Spoiler

Dec 7 22:12:04 dm800se user.warn kernel: [ 175.568000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.570000] set current avs auto aspect to 16:9
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.571000] disable wss on display 0
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.571000] set wss 7 on display 1
Dec 7 22:12:04 dm800se user.warn kernel: [ 175.572000] set sb to 3(1)
Dec 7 22:12:06 dm800se user.warn kernel: [ 178.229000] 10695 ms: 70
Dec 7 22:12:06 dm800se user.warn kernel: [ 178.262000] 32 ms: 97
Dec 7 22:12:06 dm800se user.warn kernel: [ 178.271000] 8 ms: 97
Dec 7 22:12:07 dm800se user.warn kernel: [ 179.257000] 986 ms: 97
Dec 7 22:12:08 dm800se user.warn kernel: [ 179.353000] 96 ms: 99
Dec 7 22:12:08 dm800se user.warn kernel: [ 179.399000] set mute 0 (111) 0
Dec 7 22:12:08 dm800se user.warn kernel: [ 179.401000] 48 ms: 99
Dec 7 22:12:08 dm800se user.warn kernel: [ 179.424000] 22 ms: 99
Dec 7 22:12:10 dm800se user.warn kernel: [ 181.667000] CEC send ok!
Dec 7 22:12:10 dm800se user.info kernel: [ 182.133000] fe_common: retrying i2c transfer
Dec 7 22:12:10 dm800se user.info kernel: [ 182.137000] bcm4506: channel 0 is in normale mode now
Dec 7 22:12:10 dm800se user.warn kernel: [ 182.217000] CEC send ok!
Dec 7 22:12:11 dm800se user.warn kernel: [ 182.332000] CEC send ok!
Dec 7 22:12:11 dm800se user.info kernel: [ 182.555000] bcm4506: signal_strength -2459.87dbm
Dec 7 22:12:11 dm800se user.err kernel: [ 183.063000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.065000] start pcr0 on dmx 3 pid:7ff index 4
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.066000] start audio on dmx 3 pid:800
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.066000] audio xpt start
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.067000] sync is off so we enable it
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.067000] demux-index 3 pcr0pid 7ff
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.068000] using 4 as pcr0 pidchannel
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.068000] MPEG
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.069000] audio: decoder start 0
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.071000] video delay 0 (0 ms)
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.072000] total video delay: 0 (0 ms)
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.073000] start video0 on dmx 3 pid:7ff
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.074000] total video delay: 0 (0 ms)
Dec 7 22:12:11 dm800se user.warn kernel: [ 183.078000] VIDEO0: start decode
Dec 7 22:12:11 dm800se user.info kernel: [ 183.124000] bcm4506: signal_strength -192.96dbm
Dec 7 22:12:11 dm800se user.info kernel: [ 183.129000] bcm4506: signal_strength -192.96dbm
Dec 7 22:12:11 dm800se user.info kernel: [ 183.133000] bcm4506: signal_strength -192.96dbm
Dec 7 22:12:11 dm800se user.err kernel: [ 183.270000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:12:11 dm800se user.info kernel: [ 183.306000] bcm4506: signal_strength -200.90dbm
Dec 7 22:12:11 dm800se user.info kernel: [ 183.310000] bcm4506: signal_strength -200.90dbm
Dec 7 22:12:11 dm800se user.info kernel: [ 183.315000] bcm4506: signal_strength -200.90dbm
Dec 7 22:12:12 dm800se daemon.debug CCcam: EMM: not interested in 1837:000000
Dec 7 22:12:12 dm800se daemon.debug CCcam: EMM: not interested in 1867:000000
Dec 7 22:12:12 dm800se daemon.debug CCcam: EMM: not interested in 09C4:000000
Dec 7 22:12:12 dm800se daemon.debug CCcam: EMM: not interested in 098C:000000
Dec 7 22:12:12 dm800se user.info kernel: [ 183.578000] bcm4506: signal_strength -195.70dbm
Dec 7 22:12:12 dm800se user.info kernel: [ 183.593000] bcm4506: signal_strength -195.70dbm
Dec 7 22:12:12 dm800se user.info kernel: [ 183.600000] bcm4506: signal_strength -195.70dbm
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.636000] RAP first pts 0x15b0335aa, stc 0x15b03178a, pcr valid
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.639000] audio_cdb_itb_error_isr: 105 callbacks suppressed
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.640000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.643000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.648000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.652000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.656000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.658000] ch0: lock
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.659000] RAP sampling rate info isr (48000)
Dec 7 22:12:12 dm800se user.warn kernel: [ 183.659000] eModeChange Isr.. set source_changed_event!
Dec 7 22:12:13 dm800se user.warn kernel: [ 184.428000] VIDEO0: first pts 0x15b045c6e
Dec 7 22:12:13 dm800se user.warn kernel: [ 184.578000] enable tsm0
Dec 7 22:12:13 dm800se user.info kernel: [ 184.582000] bcm4506: signal_strength -195.86dbm
Dec 7 22:12:14 dm800se user.info kernel: [ 185.605000] bcm4506: signal_strength -197.26dbm
Dec 7 22:12:14 dm800se user.info kernel: [ 185.612000] bcm4506: signal_strength -197.26dbm
Dec 7 22:12:14 dm800se user.info kernel: [ 185.620000] bcm4506: signal_strength -197.26dbm
Dec 7 22:12:15 dm800se user.info kernel: [ 186.628000] bcm4506: signal_strength -197.09dbm
Dec 7 22:12:29 dm800se user.info kernel: [ 201.264000] RCU: dropping invalid key code 4d902400
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.419000] stop pcr0 on dmx 3 pid:7ff
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.420000] stop video0 on dmx 3 pid:7ff
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.421000] VIDEO0: stop decode
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.422000] VIDEO0: set blank to 1
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.423000] audio: decoder stop
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.425000] stop audio on dmx 3 pid:800
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.425000] audio: xpt stop(3)
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.426000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.427000] bcm_audio_channel_stop(3) done
Dec 7 22:12:38 dm800se user.info kernel: [ 209.569000] bcm4506: signal_strength -197.83dbm
Dec 7 22:12:38 dm800se user.info kernel: [ 209.580000] bcm4506: signal_strength -197.83dbm
Dec 7 22:12:38 dm800se user.info kernel: [ 209.585000] bcm4506: signal_strength -197.83dbm
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.909000] start pcr0 on dmx 3 pid:6e index 5
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.910000] start audio on dmx 3 pid:50
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.911000] audio xpt start
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.911000] sync is off so we enable it
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.912000] demux-index 3 pcr0pid 6e
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.912000] using 5 as pcr0 pidchannel
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.913000] MPEG
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.914000] audio: decoder start 0
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.916000] video delay 0 (0 ms)
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.917000] total video delay: 0 (0 ms)
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.918000] start video0 on dmx 3 pid:6e
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.919000] total video delay: 0 (0 ms)
Dec 7 22:12:38 dm800se user.warn kernel: [ 209.923000] VIDEO0: start decode
Dec 7 22:12:38 dm800se user.info kernel: [ 209.963000] bcm4506: signal_strength -199.87dbm
Dec 7 22:12:38 dm800se user.info kernel: [ 209.967000] bcm4506: signal_strength -199.87dbm
Dec 7 22:12:38 dm800se user.info kernel: [ 209.973000] bcm4506: signal_strength -199.87dbm
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 0100:000000
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 0100:003341
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 0100:003317
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 1863:000000
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 0500:032830
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 0500:030B00
Dec 7 22:12:39 dm800se daemon.debug CCcam: EMM: not interested in 0500:030B00
Dec 7 22:12:39 dm800se user.info kernel: [ 210.082000] bcm4506: signal_strength -199.87dbm
Dec 7 22:12:39 dm800se user.info kernel: [ 210.086000] bcm4506: signal_strength -199.87dbm
Dec 7 22:12:39 dm800se user.info kernel: [ 210.110000] bcm4506: signal_strength -199.40dbm
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.242000] RAP first pts 0x1dc493f80, stc 0x3744cfae, pcr valid
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.244000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.248000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.252000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.256000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.260000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.264000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.268000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.273000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.277000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:39 dm800se user.warn kernel: [ 210.281000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:40 dm800se user.info kernel: [ 210.590000] bcm4506: signal_strength -199.60dbm
Dec 7 22:12:41 dm800se user.info kernel: [ 211.612000] bcm4506: signal_strength -200.33dbm
Dec 7 22:12:41 dm800se user.info kernel: [ 211.618000] bcm4506: signal_strength -200.33dbm
Dec 7 22:12:41 dm800se user.info kernel: [ 211.624000] bcm4506: signal_strength -200.33dbm
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.302000] stop pcr0 on dmx 3 pid:6e
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.303000] stop video0 on dmx 3 pid:6e
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.304000] VIDEO0: stop decode
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.305000] VIDEO0: set blank to 1
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.306000] audio: decoder stop
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.311000] stop audio on dmx 3 pid:50
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.311000] audio: xpt stop(3)
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.312000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:41 dm800se user.warn kernel: [ 212.313000] bcm_audio_channel_stop(3) done
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0100:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0100:003341
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0100:003317
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 1863:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0500:032830
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0500:030B00
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0500:030B00
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.473000] start pcr0 on dmx 3 pid:6e index 6
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.475000] start audio on dmx 3 pid:50
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.476000] audio xpt start
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.476000] sync is off so we enable it
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.477000] demux-index 3 pcr0pid 6e
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.477000] using 6 as pcr0 pidchannel
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.479000] MPEG
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.479000] audio: decoder start 0
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.482000] video delay 0 (0 ms)
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.482000] total video delay: 0 (0 ms)
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.484000] start video0 on dmx 3 pid:6e
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.484000] total video delay: 0 (0 ms)
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.488000] VIDEO0: start decode
Dec 7 22:12:42 dm800se user.info kernel: [ 212.548000] bcm4506: signal_strength -200.05dbm
Dec 7 22:12:42 dm800se user.info kernel: [ 212.553000] bcm4506: signal_strength -200.05dbm
Dec 7 22:12:42 dm800se user.info kernel: [ 212.558000] bcm4506: signal_strength -200.05dbm
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.660000] stop pcr0 on dmx 3 pid:6e
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.661000] stop video0 on dmx 3 pid:6e
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.663000] VIDEO0: stop decode
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.663000] VIDEO0: set blank to 1
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.664000] audio: decoder stop
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.669000] stop audio on dmx 3 pid:50
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.669000] audio: xpt stop(4)
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.670000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.670000] bcm_audio_channel_stop(4) done
Dec 7 22:12:42 dm800se user.info kernel: [ 212.770000] bcm4506: signal_strength -202.12dbm
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0100:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0100:003341
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0100:003317
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 1863:000000
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0500:032830
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0500:030B00
Dec 7 22:12:42 dm800se daemon.debug CCcam: EMM: not interested in 0500:030B00
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.877000] start pcr0 on dmx 3 pid:6e index 5
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.878000] start audio on dmx 3 pid:50
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.879000] audio xpt start
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.879000] sync is off so we enable it
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.880000] demux-index 3 pcr0pid 6e
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.880000] using 5 as pcr0 pidchannel
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.881000] MPEG
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.881000] audio: decoder start 0
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.884000] video delay 0 (0 ms)
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.884000] total video delay: 0 (0 ms)
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.886000] start video0 on dmx 3 pid:6e
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.887000] total video delay: 0 (0 ms)
Dec 7 22:12:42 dm800se user.warn kernel: [ 212.891000] VIDEO0: start decode
Dec 7 22:12:42 dm800se user.info kernel: [ 212.934000] bcm4506: signal_strength -202.12dbm
Dec 7 22:12:42 dm800se user.info kernel: [ 212.938000] bcm4506: signal_strength -202.12dbm
Dec 7 22:12:42 dm800se user.info kernel: [ 212.943000] bcm4506: signal_strength -202.12dbm
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.038000] stop pcr0 on dmx 3 pid:6e
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.038000] stop video0 on dmx 3 pid:6e
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.040000] VIDEO0: stop decode
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.040000] VIDEO0: set blank to 1
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.041000] bcm_audio: use saved pts 0x1fffffffe (0x10d047a18) (ret 2359298)
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.042000] audio: decoder stop
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.045000] stop audio on dmx 3 pid:50
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.045000] audio: xpt stop(1)
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.046000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:42 dm800se user.warn kernel: [ 213.046000] bcm_audio_channel_stop(1) done
Dec 7 22:12:42 dm800se user.info kernel: [ 213.140000] bcm4506: rolloff 0.25 is not supported!!!!!
Dec 7 22:12:43 dm800se user.err kernel: [ 213.436000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.438000] start pcr0 on dmx 3 pid:6e index 8
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.440000] start audio on dmx 3 pid:79
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.440000] audio xpt start
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.441000] sync is off so we enable it
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.441000] demux-index 3 pcr0pid 6e
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.442000] using 8 as pcr0 pidchannel

- - - - - - - - - -

teil 5

Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0100:000000
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0100:00A825
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0100:003341
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0100:003317
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0100:003311
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0100:003315
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 1811:000000
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 1863:000000
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0500:040F40
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0500:032830
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0500:032940
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0500:032920
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0500:030B00
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0500:032840
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 0500:043330
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 1812:000000
Dec 7 22:12:43 dm800se daemon.debug CCcam: EMM: not interested in 1812:000000
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.442000] AC3
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.443000] audio: streamtype set 1
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.443000] audio: streamtype_set: stop rave
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.444000] decode
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.444000] audio: streamtype_set: restart rave
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.445000] set mute 0 (111) 0
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.446000] audio: decoder start 0
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.449000] video delay 0 (0 ms)
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.450000] total video delay: 0 (0 ms)
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.451000] VIDEO0: set streamtype!
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.452000] set H264
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.452000] sw rave disabled!
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.452000] audio delay 18000 (200 ms)
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.453000] total video delay: 18000 (200 ms)
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.454000] start video0 on dmx 3 pid:6e
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.455000] total video delay: 18000 (200 ms)
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.458000] VIDEO0: start decode
Dec 7 22:12:43 dm800se user.info kernel: [ 213.525000] bcm4506: signal_strength -119.00dbm
Dec 7 22:12:43 dm800se user.info kernel: [ 213.528000] CA: disable pid 006e on demux 3
Dec 7 22:12:43 dm800se user.info kernel: [ 213.529000] CA: disable pid 0079 on demux 3
Dec 7 22:12:43 dm800se user.info kernel: [ 213.532000] bcm4506: signal_strength -119.00dbm
Dec 7 22:12:43 dm800se user.info kernel: [ 213.537000] bcm4506: signal_strength -119.00dbm
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.571000] RAP first pts 0xb445f172, stc 0xb88e8290, pcr valid
Dec 7 22:12:43 dm800se user.info kernel: [ 213.609000] bcm4506: signal_strength -119.00dbm
Dec 7 22:12:43 dm800se user.info kernel: [ 213.615000] bcm4506: signal_strength -119.00dbm
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.757000] stop pcr0 on dmx 3 pid:6e
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.758000] stop video0 on dmx 3 pid:6e
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.759000] VIDEO0: stop decode
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.760000] VIDEO0: set blank to 1
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.761000] audio: decoder stop
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.765000] stop audio on dmx 3 pid:79
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.765000] audio: xpt stop(7)
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.765000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:43 dm800se user.warn kernel: [ 213.766000] bcm_audio_channel_stop(7) done
Dec 7 22:12:43 dm800se user.info kernel: [ 213.890000] bcm4506: signal_strength -117.71dbm
Dec 7 22:12:44 dm800se user.err kernel: [ 214.580000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.582000] start pcr0 on dmx 3 pid:a5 index 6
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.583000] start audio on dmx 3 pid:6e
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.583000] audio xpt start
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.584000] sync is off so we enable it
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.584000] demux-index 3 pcr0pid a5
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.585000] using 6 as pcr0 pidchannel
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.585000] AC3
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.586000] audio: decoder start 0
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.588000] audio delay 18000 (200 ms)
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.589000] total video delay: 18000 (200 ms)
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.590000] start video0 on dmx 3 pid:a5
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.591000] total video delay: 18000 (200 ms)
Dec 7 22:12:44 dm800se user.warn kernel: [ 214.594000] VIDEO0: start decode
Dec 7 22:12:44 dm800se user.info kernel: [ 214.653000] bcm4506: signal_strength -106.52dbm
Dec 7 22:12:44 dm800se user.info kernel: [ 214.657000] bcm4506: signal_strength -106.52dbm
Dec 7 22:12:44 dm800se user.info kernel: [ 214.661000] bcm4506: signal_strength -106.52dbm
Dec 7 22:12:44 dm800se user.info kernel: [ 214.914000] bcm4506: signal_strength -108.64dbm
Dec 7 22:12:45 dm800se user.info kernel: [ 215.629000] bcm4506: signal_strength -109.58dbm
Dec 7 22:12:45 dm800se user.info kernel: [ 215.634000] bcm4506: signal_strength -109.58dbm
Dec 7 22:12:45 dm800se user.info kernel: [ 215.946000] bcm4506: signal_strength -109.33dbm
Dec 7 22:12:47 dm800se user.info kernel: [ 216.970000] bcm4506: signal_strength -111.26dbm
Dec 7 22:12:48 dm800se user.info kernel: [ 217.629000] bcm4506: signal_strength -106.71dbm
Dec 7 22:12:48 dm800se user.info kernel: [ 217.634000] bcm4506: signal_strength -106.71dbm
Dec 7 22:12:48 dm800se user.info kernel: [ 217.994000] bcm4506: signal_strength -109.41dbm
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.589000] stop pcr0 on dmx 3 pid:a5
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.590000] stop video0 on dmx 3 pid:a5
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.591000] bcm_mpeg_decoder_get_pts: 541 callbacks suppressed
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.591000] VIDEO0 use saved pts 0x15b26793e (ret 0)
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.593000] VIDEO0: stop decode
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.593000] VIDEO0: set blank to 1
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.594000] bcm_audio: use saved pts 0x1fffffffe (0x10d047a18) (ret 2359298)
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.595000] audio: decoder stop
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.600000] stop audio on dmx 3 pid:6e
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.601000] audio: xpt stop(3)
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.601000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:49 dm800se user.warn kernel: [ 218.602000] bcm_audio_channel_stop(3) done
Dec 7 22:12:49 dm800se user.info kernel: [ 218.822000] bcm4506: rolloff 0.25 is not supported!!!!!
Dec 7 22:12:49 dm800se user.info kernel: [ 219.005000] bcm4506: signal_strength -119.35dbm
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.132000] start pcr0 on dmx 3 pid:6e index 5
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.133000] start audio on dmx 3 pid:50
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.134000] audio xpt start
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.134000] sync is off so we enable it
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.135000] demux-index 3 pcr0pid 6e
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.135000] using 5 as pcr0 pidchannel
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.136000] MPEG
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.136000] audio: streamtype set 0
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.137000] audio: streamtype_set: stop rave
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.137000] audio: streamtype_set: restart rave
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.138000] set mute 0 (111) 0
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.138000] audio: decoder start 0
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.141000] audio delay 18000 (200 ms)
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.141000] total video delay: 18000 (200 ms)
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.143000] VIDEO0: set streamtype!
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.143000] set MPEG2
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.143000] sw rave disabled!
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.144000] video delay 0 (0 ms)
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.144000] total video delay: 0 (0 ms)
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.145000] start video0 on dmx 3 pid:6e
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.146000] total video delay: 0 (0 ms)
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.150000] VIDEO0: start decode
Dec 7 22:12:49 dm800se user.info kernel: [ 219.191000] bcm4506: signal_strength -198.46dbm
Dec 7 22:12:49 dm800se user.info kernel: [ 219.195000] bcm4506: signal_strength -198.46dbm
Dec 7 22:12:49 dm800se user.info kernel: [ 219.200000] bcm4506: signal_strength -198.46dbm
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.289000] stop pcr0 on dmx 3 pid:6e
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.290000] stop video0 on dmx 3 pid:6e
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.290000] VIDEO0 use saved pts 0x15b26793e (ret 0)
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.292000] VIDEO0: stop decode
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.293000] VIDEO0: set blank to 1
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.294000] bcm_audio: use saved pts 0x1fffffffe (0x10d047a18) (ret 2359298)
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.295000] audio: decoder stop
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.298000] stop audio on dmx 3 pid:50
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.298000] audio: xpt stop(3)
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.299000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:49 dm800se user.warn kernel: [ 219.299000] bcm_audio_channel_stop(3) done
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.379000] start pcr0 on dmx 3 pid:6e index 5
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.380000] start audio on dmx 3 pid:50
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.381000] audio xpt start
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.381000] sync is off so we enable it
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.382000] demux-index 3 pcr0pid 6e
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.382000] using 5 as pcr0 pidchannel
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.383000] MPEG
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.384000] audio: decoder start 0
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.386000] video delay 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.387000] total video delay: 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.388000] start video0 on dmx 3 pid:6e
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.389000] total video delay: 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.393000] VIDEO0: start decode
Dec 7 22:12:50 dm800se user.info kernel: [ 219.452000] bcm4506: signal_strength -198.37dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 219.456000] bcm4506: signal_strength -198.37dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 219.461000] bcm4506: signal_strength -198.37dbm
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.545000] stop pcr0 on dmx 3 pid:6e
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.546000] stop video0 on dmx 3 pid:6e
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.546000] VIDEO0 use saved pts 0x15b26793e (ret 0)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.548000] VIDEO0: stop decode
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.549000] VIDEO0: set blank to 1
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.550000] audio: decoder stop
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.552000] stop audio on dmx 3 pid:50
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.552000] audio: xpt stop(3)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.553000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.553000] bcm_audio_channel_stop(3) done
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.632000] start pcr0 on dmx 3 pid:6e index 5
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.634000] start audio on dmx 3 pid:50
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.634000] audio xpt start
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.634000] sync is off so we enable it
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.635000] demux-index 3 pcr0pid 6e
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.635000] using 5 as pcr0 pidchannel
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.636000] MPEG

- - - - - - - - - -

teil 6

Dec 7 22:12:50 dm800se user.warn kernel: [ 219.636000] audio: decoder start 0
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.639000] video delay 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.639000] total video delay: 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.641000] start video0 on dmx 3 pid:6e
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.642000] total video delay: 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.645000] VIDEO0: start decode
Dec 7 22:12:50 dm800se user.info kernel: [ 219.703000] bcm4506: signal_strength -198.83dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 219.707000] bcm4506: signal_strength -198.83dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 219.713000] bcm4506: signal_strength -198.83dbm
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.791000] stop pcr0 on dmx 3 pid:6e
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.793000] stop video0 on dmx 3 pid:6e
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.793000] VIDEO0 use saved pts 0x15b26793e (ret 0)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.795000] VIDEO0: stop decode
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.795000] VIDEO0: set blank to 1
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.796000] bcm_audio: use saved pts 0x1fffffffe (0x10d047a18) (ret 2359298)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.797000] audio: decoder stop
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.800000] stop audio on dmx 3 pid:50
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.800000] audio: xpt stop(3)
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.801000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:50 dm800se user.warn kernel: [ 219.801000] bcm_audio_channel_stop(3) done
Dec 7 22:12:50 dm800se user.info kernel: [ 219.881000] bcm4506: signal_strength -198.83dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 219.886000] bcm4506: signal_strength -198.83dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 220.044000] bcm4506: signal_strength -258.33dbm
Dec 7 22:12:50 dm800se user.err kernel: [ 220.227000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.229000] start pcr0 on dmx 3 pid:7ff index 4
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.231000] start audio on dmx 3 pid:800
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.231000] audio xpt start
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.232000] sync is off so we enable it
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.232000] demux-index 3 pcr0pid 7ff
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.233000] using 4 as pcr0 pidchannel
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.234000] MPEG
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.234000] audio: decoder start 0
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.237000] video delay 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.237000] total video delay: 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.239000] start video0 on dmx 3 pid:7ff
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.239000] total video delay: 0 (0 ms)
Dec 7 22:12:50 dm800se user.warn kernel: [ 220.244000] VIDEO0: start decode
Dec 7 22:12:50 dm800se user.info kernel: [ 220.269000] bcm4506: signal_strength -193.72dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 220.273000] bcm4506: signal_strength -193.72dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 220.277000] bcm4506: signal_strength -193.72dbm
Dec 7 22:12:51 dm800se user.err kernel: [ 220.337000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:12:51 dm800se user.info kernel: [ 220.356000] bcm4506: signal_strength -193.72dbm
Dec 7 22:12:51 dm800se user.info kernel: [ 220.360000] bcm4506: signal_strength -193.72dbm
Dec 7 22:12:51 dm800se user.info kernel: [ 220.364000] bcm4506: signal_strength -193.72dbm
Dec 7 22:12:51 dm800se user.info kernel: [ 221.049000] bcm4506: signal_strength -197.03dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 221.632000] bcm4506: signal_strength -196.42dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 221.637000] bcm4506: signal_strength -196.42dbm
Dec 7 22:12:50 dm800se user.info kernel: [ 222.053000] bcm4506: signal_strength -196.83dbm
Dec 7 22:12:51 dm800se user.info kernel: [ 223.075000] bcm4506: signal_strength -196.09dbm
Dec 7 22:12:51 dm800se user.warn kernel: [ 223.236000] RAP first pts 0xb591ba84, stc 0x15b397984, pcr valid
Dec 7 22:12:51 dm800se user.warn kernel: [ 223.239000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:51 dm800se user.warn kernel: [ 223.243000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:51 dm800se user.warn kernel: [ 223.247000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:51 dm800se user.warn kernel: [ 223.251000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:51 dm800se user.warn kernel: [ 223.255000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:51 dm800se user.warn kernel: [ 223.259000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:52 dm800se user.info kernel: [ 223.630000] bcm4506: signal_strength -196.48dbm
Dec 7 22:12:52 dm800se user.info kernel: [ 223.635000] bcm4506: signal_strength -196.48dbm
Dec 7 22:12:52 dm800se user.warn kernel: [ 224.291000] audio_cdb_itb_error_isr: 250 callbacks suppressed
Dec 7 22:12:52 dm800se user.warn kernel: [ 224.292000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:52 dm800se user.warn kernel: [ 224.295000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:52 dm800se user.warn kernel: [ 224.300000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:52 dm800se user.warn kernel: [ 224.304000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:52 dm800se user.warn kernel: [ 224.308000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:52 dm800se user.warn kernel: [ 224.312000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:52 dm800se user.warn kernel: [ 224.316000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:53 dm800se user.warn kernel: [ 224.320000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:53 dm800se user.warn kernel: [ 224.324000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:53 dm800se user.warn kernel: [ 224.328000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.422000] stop pcr0 on dmx 3 pid:7ff
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.423000] stop video0 on dmx 3 pid:7ff
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.424000] VIDEO0: stop decode
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.425000] VIDEO0: set blank to 1
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.426000] audio: decoder stop
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.429000] stop audio on dmx 3 pid:800
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.430000] audio: xpt stop(3)
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.430000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.431000] bcm_audio_channel_stop(3) done
Dec 7 22:12:54 dm800se user.info kernel: [ 225.565000] bcm4506: signal_strength -198.15dbm
Dec 7 22:12:54 dm800se user.info kernel: [ 225.576000] bcm4506: signal_strength -198.15dbm
Dec 7 22:12:54 dm800se user.info kernel: [ 225.581000] bcm4506: signal_strength -198.15dbm
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.933000] start pcr0 on dmx 3 pid:2ff index 5
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.934000] start audio on dmx 3 pid:303
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.935000] audio xpt start
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.935000] sync is off so we enable it
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.936000] demux-index 3 pcr0pid 2ff
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.936000] using 5 as pcr0 pidchannel
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.937000] AC3
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.937000] audio: streamtype set 1
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.937000] audio: streamtype_set: stop rave
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.938000] decode
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.938000] audio: streamtype_set: restart rave
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.939000] set mute 0 (111) 0
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.939000] audio: decoder start 0
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.942000] video delay 0 (0 ms)
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.942000] total video delay: 0 (0 ms)
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.944000] VIDEO0: set streamtype!
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.944000] set H264
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.944000] sw rave disabled!
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.945000] audio delay 18000 (200 ms)
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.945000] total video delay: 18000 (200 ms)
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.946000] start video0 on dmx 3 pid:2ff
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.947000] total video delay: 18000 (200 ms)
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.950000] VIDEO0: start decode
Dec 7 22:12:54 dm800se user.info kernel: [ 225.978000] bcm4506: signal_strength -114.25dbm
Dec 7 22:12:54 dm800se user.info kernel: [ 225.982000] bcm4506: signal_strength -114.25dbm
Dec 7 22:12:54 dm800se user.info kernel: [ 225.986000] bcm4506: signal_strength -114.25dbm
Dec 7 22:12:54 dm800se user.warn kernel: [ 225.990000] RAP first pts 0x1eca3aed4, stc 0x1f74a2c4a, pcr valid
Dec 7 22:12:54 dm800se user.info kernel: [ 226.075000] bcm4506: signal_strength -114.25dbm
Dec 7 22:12:54 dm800se user.info kernel: [ 226.079000] bcm4506: signal_strength -114.25dbm
Dec 7 22:12:54 dm800se user.info kernel: [ 226.083000] bcm4506: signal_strength -114.25dbm
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.327000] stop pcr0 on dmx 3 pid:2ff
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.328000] stop video0 on dmx 3 pid:2ff
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.330000] VIDEO0: stop decode
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.330000] VIDEO0: set blank to 1
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.331000] audio: decoder stop
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.333000] stop audio on dmx 3 pid:303
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.333000] audio: xpt stop(3)
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.334000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.334000] bcm_audio_channel_stop(3) done
Dec 7 22:12:55 dm800se user.info kernel: [ 226.579000] bcm4506: signal_strength -194.63dbm
Dec 7 22:12:55 dm800se user.err kernel: [ 226.670000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.672000] start pcr0 on dmx 3 pid:7ff index 4
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.673000] start audio on dmx 3 pid:800
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.674000] audio xpt start
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.674000] sync is off so we enable it
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.675000] demux-index 3 pcr0pid 7ff
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.675000] using 4 as pcr0 pidchannel
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.676000] MPEG
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.676000] audio: streamtype set 0
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.676000] audio: streamtype_set: stop rave
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.677000] audio: streamtype_set: restart rave
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.678000] set mute 0 (111) 0
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.678000] audio: decoder start 0
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.681000] audio delay 18000 (200 ms)
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.681000] total video delay: 18000 (200 ms)
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.682000] VIDEO0: set streamtype!
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.683000] set MPEG2
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.683000] sw rave disabled!
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.684000] video delay 0 (0 ms)
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.684000] total video delay: 0 (0 ms)
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.685000] start video0 on dmx 3 pid:7ff
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.686000] total video delay: 0 (0 ms)
Dec 7 22:12:55 dm800se user.warn kernel: [ 226.690000] VIDEO0: start decode
Dec 7 22:12:55 dm800se user.info kernel: [ 226.716000] bcm4506: signal_strength -194.55dbm
Dec 7 22:12:55 dm800se user.info kernel: [ 226.720000] bcm4506: signal_strength -194.55dbm
Dec 7 22:12:55 dm800se user.info kernel: [ 226.725000] bcm4506: signal_strength -194.55dbm
Dec 7 22:12:55 dm800se user.err kernel: [ 226.775000] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
Dec 7 22:12:55 dm800se user.info kernel: [ 226.794000] bcm4506: signal_strength -194.55dbm
Dec 7 22:12:55 dm800se user.info kernel: [ 226.798000] bcm4506: signal_strength -194.55dbm
Dec 7 22:12:55 dm800se user.info kernel: [ 226.802000] bcm4506: signal_strength -194.55dbm
Dec 7 22:12:55 dm800se user.info kernel: [ 227.583000] bcm4506: signal_strength -197.73dbm
Dec 7 22:12:55 dm800se user.info kernel: [ 227.604000] bcm4506: signal_strength -197.73dbm
Dec 7 22:12:55 dm800se user.info kernel: [ 227.609000] bcm4506: signal_strength -197.73dbm
Dec 7 22:12:56 dm800se user.warn kernel: [ 228.426000] RAP first pts 0x19e3b6cc6, stc 0x15b409a62, pcr valid
Dec 7 22:12:56 dm800se user.warn kernel: [ 229.299000] audio_cdb_itb_error_isr: 564 callbacks suppressed
Dec 7 22:12:56 dm800se user.warn kernel: [ 229.299000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:56 dm800se user.warn kernel: [ 229.303000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:56 dm800se user.warn kernel: [ 229.307000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:56 dm800se user.warn kernel: [ 229.312000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:56 dm800se user.warn kernel: [ 229.316000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.320000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.324000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.328000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.332000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.336000] audio_cdb_itb_error_isr! underflow
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.521000] stop pcr0 on dmx 3 pid:7ff
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.521000] stop video0 on dmx 3 pid:7ff
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.523000] VIDEO0: stop decode
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.523000] VIDEO0: set blank to 1
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.525000] audio: decoder stop
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.526000] stop audio on dmx 3 pid:800
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.527000] audio: xpt stop(3)
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.527000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:12:57 dm800se user.warn kernel: [ 229.528000] bcm_audio_channel_stop(3) done
Dec 7 22:12:57 dm800se user.info kernel: [ 229.665000] bcm4506: signal_strength -194.68dbm
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.088000] start pcr0 on dmx 3 pid:17de index 5
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.089000] start audio on dmx 3 pid:17e8
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.090000] audio xpt start

- - - - - - - - - -

teil 7

Dec 7 22:12:57 dm800se user.warn kernel: [ 230.090000] sync is off so we enable it
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.091000] demux-index 3 pcr0pid 17de
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.091000] using 5 as pcr0 pidchannel
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.092000] MPEG
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.092000] audio: decoder start 0
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.095000] video delay 0 (0 ms)
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.095000] total video delay: 0 (0 ms)
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.097000] VIDEO0: set streamtype!
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.098000] set H264
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.098000] sw rave disabled!
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.099000] audio delay 18000 (200 ms)
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.099000] total video delay: 18000 (200 ms)
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.101000] start video0 on dmx 3 pid:17de
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.102000] total video delay: 18000 (200 ms)
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.105000] VIDEO0: start decode
Dec 7 22:12:57 dm800se user.info kernel: [ 230.139000] bcm4506: signal_strength -122.20dbm
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.176000] RAP first pts 0x5da87dfc, stc 0x5da86a68, pcr valid
Dec 7 22:12:57 dm800se user.warn kernel: [ 230.199000] ch0: lock
Dec 7 22:12:57 dm800se user.info kernel: [ 230.251000] bcm4506: signal_strength -122.20dbm
Dec 7 22:12:58 dm800se user.info kernel: [ 230.689000] bcm4506: signal_strength -121.63dbm
Dec 7 22:12:58 dm800se user.warn kernel: [ 230.747000] VIDEO0: first pts 0x5da98456
Dec 7 22:12:58 dm800se user.warn kernel: [ 230.747000] VIDEO0: framerate changed 6
Dec 7 22:12:58 dm800se user.warn kernel: [ 230.747000] VIDEO0: resolution changed (1280 720)
Dec 7 22:12:58 dm800se user.warn kernel: [ 230.749000] set current avs auto aspect to 16:9
Dec 7 22:12:58 dm800se user.warn kernel: [ 230.749000] disable wss on display 0
Dec 7 22:12:58 dm800se user.warn kernel: [ 230.750000] set wss 7 on display 1
Dec 7 22:12:58 dm800se user.warn kernel: [ 230.751000] set sb to 3(1)
Dec 7 22:12:58 dm800se user.warn kernel: [ 230.900000] enable tsm0
Dec 7 22:12:58 dm800se user.warn kernel: [ 231.107000] VIDEO0: progressive changed (1)
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.589000] stop pcr0 on dmx 3 pid:17de
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.589000] stop video0 on dmx 3 pid:17de
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.596000] VIDEO0: stop decode
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.597000] VIDEO0: set blank to 1
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.598000] audio: decoder stop
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.599000] stop audio on dmx 3 pid:17e8
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.600000] audio: xpt stop(3)
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.600000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:13:02 dm800se user.warn kernel: [ 234.601000] bcm_audio_channel_stop(3) done
Dec 7 22:13:02 dm800se user.info kernel: [ 234.742000] bcm4506: signal_strength -121.41dbm
Dec 7 22:13:02 dm800se user.info kernel: [ 234.754000] bcm4506: signal_strength -121.41dbm
Dec 7 22:13:02 dm800se user.info kernel: [ 234.759000] bcm4506: signal_strength -121.41dbm
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.161000] start pcr0 on dmx 3 pid:ff index 5
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.162000] start audio on dmx 3 pid:103
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.162000] audio xpt start
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.163000] sync is off so we enable it
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.163000] demux-index 3 pcr0pid ff
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.164000] using 5 as pcr0 pidchannel
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.165000] AC3
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.165000] audio: streamtype set 1
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.166000] audio: streamtype_set: stop rave
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.166000] decode
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.166000] audio: streamtype_set: restart rave
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.167000] set mute 0 (111) 0
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.168000] audio: decoder start 0
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.171000] audio delay 18000 (200 ms)
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.171000] total video delay: 18000 (200 ms)
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.173000] start video0 on dmx 3 pid:ff
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.174000] total video delay: 18000 (200 ms)
Dec 7 22:13:02 dm800se user.warn kernel: [ 235.177000] VIDEO0: start decode
Dec 7 22:13:02 dm800se user.info kernel: [ 235.210000] bcm4506: signal_strength -119.64dbm
Dec 7 22:13:02 dm800se user.info kernel: [ 235.214000] bcm4506: signal_strength -119.64dbm
Dec 7 22:13:02 dm800se user.info kernel: [ 235.219000] bcm4506: signal_strength -119.64dbm
Dec 7 22:13:03 dm800se user.info kernel: [ 235.422000] bcm4506: signal_strength -116.67dbm
Dec 7 22:13:03 dm800se user.info kernel: [ 235.426000] bcm4506: signal_strength -116.67dbm
Dec 7 22:13:03 dm800se user.info kernel: [ 235.431000] bcm4506: signal_strength -116.67dbm
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.502000] RAP first pts 0x1befda51e, stc 0x16463fb80, pcr valid
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.503000] audio_cdb_itb_error_isr: 54 callbacks suppressed
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.504000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.508000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.512000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.516000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.520000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.524000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.528000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.532000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.536000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.warn kernel: [ 235.540000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:03 dm800se user.info kernel: [ 235.764000] bcm4506: signal_strength -117.68dbm
Dec 7 22:13:04 dm800se user.info kernel: [ 236.790000] bcm4506: signal_strength -119.99dbm
Dec 7 22:13:04 dm800se user.info kernel: [ 236.796000] bcm4506: signal_strength -119.99dbm
Dec 7 22:13:04 dm800se user.info kernel: [ 236.801000] bcm4506: signal_strength -119.99dbm
Dec 7 22:13:06 dm800se user.info kernel: [ 237.814000] bcm4506: signal_strength -118.65dbm
Dec 7 22:13:07 dm800se user.info kernel: [ 238.800000] bcm4506: signal_strength -116.53dbm
Dec 7 22:13:07 dm800se user.info kernel: [ 238.804000] bcm4506: signal_strength -116.53dbm
Dec 7 22:13:07 dm800se user.info kernel: [ 238.829000] bcm4506: signal_strength -116.53dbm
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.511000] audio_cdb_itb_error_isr: 1226 callbacks suppressed
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.512000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.515000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.519000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.523000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.527000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.531000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.535000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.539000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.543000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:09 dm800se user.warn kernel: [ 240.547000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.516000] audio_cdb_itb_error_isr: 1225 callbacks suppressed
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.516000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.520000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.524000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.528000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.532000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.536000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.540000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.544000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.548000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:14 dm800se user.warn kernel: [ 245.552000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.522000] audio_cdb_itb_error_isr: 1227 callbacks suppressed
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.522000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.526000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.530000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.534000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.538000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.542000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.546000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.550000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.554000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:19 dm800se user.warn kernel: [ 250.558000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.530000] audio_cdb_itb_error_isr: 1227 callbacks suppressed
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.531000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.534000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.538000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.542000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.546000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.550000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.554000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.558000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.563000] audio_cdb_itb_error_isr! underflow
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.567000] audio_cdb_itb_error_isr! underflow

- - - - - - - - - -

teil 8

Dec 7 22:13:24 dm800se user.warn kernel: [ 255.609000] stop pcr0 on dmx 3 pid:ff
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.611000] stop video0 on dmx 3 pid:ff
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.612000] VIDEO0: stop decode
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.613000] VIDEO0: set blank to 1
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.614000] audio: decoder stop
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.616000] stop audio on dmx 3 pid:103
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.616000] audio: xpt stop(3)
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.617000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:13:24 dm800se user.warn kernel: [ 255.617000] bcm_audio_channel_stop(3) done
Dec 7 22:13:28 dm800se user.info kernel: [ 260.244000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:13:28 dm800se user.info kernel: [ 260.250000] bcmfb: disable manual blit
Dec 7 22:13:29 dm800se user.info kernel: [ 261.115000] bcm4506: channel 0 is sleeping now
Dec 7 22:13:40 dm800se daemon.info init: Switching to runlevel: 3
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.523000] 97099 ms: 100
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.589000] 66 ms: 34
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.825000] 236 ms: 35
Dec 7 22:13:45 dm800se daemon.debug CCcam: ======================================================================
Dec 7 22:13:45 dm800se daemon.debug CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08
Dec 7 22:13:45 dm800se daemon.debug CCcam: ======================================================================
Dec 7 22:13:45 dm800se daemon.debug CCcam: online using nodeId 99ed01a2902c492c
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.889000] VIDEO0: set streamtype!
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.889000] set MPEG2
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.889000] sw rave disabled!
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.890000] VIDEO0: set blank to 0
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.891000] sync is off so we enable it
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.892000] playback!
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.892000] total video delay: 0 (0 ms)
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.897000] VIDEO0: start decode
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.898000] flush video decoder
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.899000] bcm_mpeg_decoder_get_pts: 12 callbacks suppressed
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.899000] VIDEO0 use saved pts 0x5dae2fa6 (ret 0)
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.947000] VIDEO0: first pts 0x0
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.947000] VIDEO0: framerate changed 3
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.962000] set current avs auto aspect to 16:9
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.963000] disable wss on display 0
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.963000] set wss 7 on display 1
Dec 7 22:13:45 dm800se user.warn kernel: [ 276.965000] set sb to 3(1)
Dec 7 22:13:45 dm800se user.warn kernel: [ 277.058000] VIDEO0: set blank to 0
Dec 7 22:13:45 dm800se user.warn kernel: [ 277.059000] VIDEO0: stop decode
Dec 7 22:13:45 dm800se user.warn kernel: [ 277.060000] VIDEO0: set blank to 0
Dec 7 22:13:45 dm800se user.warn kernel: [ 277.060000] no decoder left in sync handling so disable xpt_sync
Dec 7 22:13:45 dm800se daemon.debug CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
Dec 7 22:13:45 dm800se daemon.debug CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
Dec 7 22:13:45 dm800se daemon.debug CCcam: static cw not found or bad
Dec 7 22:13:45 dm800se daemon.debug CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
Dec 7 22:13:45 dm800se daemon.debug CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
Dec 7 22:13:45 dm800se daemon.debug CCcam: server started on port 12000
Dec 7 22:13:47 dm800se user.info kernel: [ 279.243000] bcmfb: enable manual blit
Dec 7 22:13:47 dm800se user.info kernel: [ 279.269000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:13:48 dm800se user.info kernel: [ 279.647000] bcm4506: channel 0 is in normale mode now
Dec 7 22:13:48 dm800se user.info kernel: [ 279.664000] bcm4506: channel 0 is sleeping now
Dec 7 22:13:48 dm800se user.warn kernel: [ 280.180000] 3354 ms: 36
Dec 7 22:13:48 dm800se user.warn kernel: [ 280.210000] 30 ms: 50
Dec 7 22:13:48 dm800se user.warn kernel: [ 280.214000] 4 ms: 50
Dec 7 22:13:48 dm800se user.warn kernel: [ 280.220000] 6 ms: 50
Dec 7 22:13:50 dm800se user.warn kernel: [ 281.412000] 1191 ms: 50
Dec 7 22:13:50 dm800se user.info kernel: [ 281.515000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.515000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.516000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.517000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.517000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.518000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.519000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.519000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.520000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.info kernel: [ 281.521000] fe_common: retrying i2c transfer
Dec 7 22:13:50 dm800se user.err kernel: [ 281.521000] fe: read ret=-145
Dec 7 22:13:50 dm800se user.err kernel: [ 281.522000] bcm4506: lnb_sense_i2c_read failed!
Dec 7 22:13:50 dm800se daemon.notice automount[994]: >> NTFS signature is missing.
Dec 7 22:13:50 dm800se daemon.notice automount[994]: >> Failed to mount '/dev/sda': Invalid argument
Dec 7 22:13:50 dm800se daemon.notice automount[994]: >> The device '/dev/sda' doesn't seem to have a valid NTFS.
Dec 7 22:13:50 dm800se daemon.notice automount[994]: >> Maybe the wrong device is used? Or the whole disk instead of a
Dec 7 22:13:50 dm800se daemon.notice automount[994]: >> partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Dec 7 22:13:50 dm800se daemon.notice automount[994]: >> mount: mounting /dev/sda on /autofs/sda failed: Device or resource busy
Dec 7 22:13:50 dm800se daemon.err automount[994]: mount(generic): failed to mount /dev/sda (type auto) on /autofs/sda
Dec 7 22:13:50 dm800se daemon.err automount[994]: failed to mount /autofs/sda
Dec 7 22:13:50 dm800se user.warn kernel: [ 282.216000] 803 ms: 53
Dec 7 22:13:50 dm800se user.warn kernel: [ 282.245000] 29 ms: 56
Dec 7 22:13:50 dm800se user.warn kernel: [ 282.263000] 18 ms: 56
Dec 7 22:13:50 dm800se user.warn kernel: [ 282.276000] 13 ms: 56
Dec 7 22:13:50 dm800se user.warn kernel: [ 282.278000] 2 ms: 56
Dec 7 22:13:50 dm800se user.warn kernel: [ 282.300000] 22 ms: 56
Dec 7 22:13:51 dm800se user.warn kernel: [ 282.591000] 291 ms: 56
Dec 7 22:13:51 dm800se user.warn kernel: [ 282.733000] 142 ms: 57
Dec 7 22:13:51 dm800se user.warn kernel: [ 282.739000] 6 ms: 57
Dec 7 22:13:51 dm800se user.warn kernel: [ 282.741000] 1 ms: 57
Dec 7 22:13:51 dm800se user.warn kernel: [ 282.743000] 1 ms: 57
Dec 7 22:13:51 dm800se user.warn kernel: [ 282.908000] 165 ms: 57
Dec 7 22:13:51 dm800se user.warn kernel: [ 282.936000] 28 ms: 58
Dec 7 22:13:51 dm800se user.warn kernel: [ 283.000000] 64 ms: 58
Dec 7 22:13:51 dm800se user.warn kernel: [ 283.178000] 178 ms: 58
Dec 7 22:13:51 dm800se user.warn kernel: [ 283.207000] 29 ms: 59
Dec 7 22:13:51 dm800se user.warn kernel: [ 283.217000] 10 ms: 59
Dec 7 22:13:51 dm800se user.warn kernel: [ 283.219000] 1 ms: 59
Dec 7 22:13:51 dm800se user.warn kernel: [ 283.221000] 1 ms: 59
Dec 7 22:13:51 dm800se user.warn kernel: [ 283.232000] 10 ms: 59
Dec 7 22:13:51 dm800se user.warn kernel: [ 283.249000] 17 ms: 59
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.095000] 845 ms: 59
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.123000] 28 ms: 62
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.136000] 12 ms: 62
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.152000] 16 ms: 62
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.172000] 19 ms: 62
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.184000] 12 ms: 62
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.186000] 2 ms: 62
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.191000] 5 ms: 62
Dec 7 22:13:52 dm800se user.warn kernel: [ 284.205000] 14 ms: 62
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.588000] 1383 ms: 62
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.665000] 76 ms: 66
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.719000] 53 ms: 66
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.822000] 103 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.824000] 2 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.857000] 33 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.860000] 3 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.862000] 2 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.867000] 5 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.877000] 10 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.891000] 14 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 285.893000] 2 ms: 67

 

[MKLST2]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

du hättest das Ganze in einen Spoiler kopieren soll

 

[montiee]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

teil 9

Spoiler

Dec 7 22:13:54 dm800se user.info kernel: [ 285.915000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.124000] 230 ms: 67
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.251000] 127 ms: 68
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.286000] set current avs auto aspect to 4:3
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.287000] disable wss on display 0
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.287000] set wss 8 on display 1
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.288000] set sb to 3(2)
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.288000] set current avs auto aspect to 4:3
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.289000] disable wss on display 0
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.290000] set wss 8 on display 1
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.290000] set sb to 3(2)
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.292000] disable wss on display 0
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.292000] set wss 8 on display 1
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.293000] set input to 0
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.293000] set fb to 2(0)
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.294000] set current avs auto aspect to 4:3
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.295000] disable wss on display 0
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.295000] set wss 8 on display 1
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.296000] set sb to 3(2)
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.299000] set ac3 to downmix
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.299000] audio: streamtype set 1
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.300000] decode
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.300000] set mute 0 (111) 0
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.303000] set ac3plus to use_hdmi_caps
Dec 7 22:13:54 dm800se user.warn kernel: [ 286.310000] 59 ms: 68
Dec 7 22:13:55 dm800se user.warn kernel: [ 286.344000] 34 ms: 69
Dec 7 22:13:55 dm800se user.warn kernel: [ 286.358000] 14 ms: 69
Dec 7 22:13:55 dm800se user.warn kernel: [ 286.596000] 237 ms: 69
Dec 7 22:13:55 dm800se user.warn kernel: [ 286.599000] 3 ms: 69
Dec 7 22:13:55 dm800se user.warn kernel: [ 286.648000] 48 ms: 69
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.846000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.847000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.847000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.848000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.886000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.887000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.887000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.888000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.889000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.889000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.891000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.891000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.892000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.892000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.897000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.897000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.898000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.898000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.899000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.900000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.901000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.901000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.902000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.903000] set wss 7 on display 1

- - - - - - - - - -

teil 10 & somit der letzte, ich hoffe ihr könnt mir helfen

Dec 7 22:14:02 dm800se user.warn kernel: [ 293.904000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.904000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.905000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.905000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.910000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.911000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.911000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.912000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.913000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.913000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.914000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.914000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.916000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.916000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.918000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.919000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.919000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.920000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.924000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.925000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.925000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.926000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.928000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.928000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.929000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.929000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.931000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.931000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.932000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.933000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.934000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.934000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.938000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.939000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.939000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.940000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.941000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.941000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.942000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.942000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.948000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.948000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.949000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.949000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.950000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.951000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.951000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.952000] set sb to 3(1)
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.953000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.953000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.955000] set current avs auto aspect to 16:9
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.955000] disable wss on display 0
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.956000] set wss 7 on display 1
Dec 7 22:14:02 dm800se user.warn kernel: [ 293.956000] set sb to 3(1)
Dec 7 22:14:04 dm800se user.warn kernel: [ 296.233000] 9585 ms: 69
Dec 7 22:14:04 dm800se user.warn kernel: [ 296.264000] 31 ms: 96
Dec 7 22:14:04 dm800se user.warn kernel: [ 296.298000] 34 ms: 97
Dec 7 22:14:05 dm800se user.warn kernel: [ 297.265000] 966 ms: 97
Dec 7 22:14:06 dm800se user.warn kernel: [ 297.375000] 110 ms: 99
Dec 7 22:14:06 dm800se user.warn kernel: [ 297.434000] set mute 0 (111) 0
Dec 7 22:14:06 dm800se user.warn kernel: [ 297.438000] 63 ms: 99
Dec 7 22:14:06 dm800se user.warn kernel: [ 297.464000] 26 ms: 99
Dec 7 22:14:08 dm800se user.warn kernel: [ 299.418000] CEC send ok!
Dec 7 22:14:10 dm800se user.info kernel: [ 301.353000] bcm4506: channel 0 is in normale mode now
Dec 7 22:14:10 dm800se user.info kernel: [ 301.396000] bcm4506: signal_strength -691.93dbm
Dec 7 22:14:10 dm800se user.info kernel: [ 301.409000] bcm4506: signal_strength -691.93dbm
Dec 7 22:14:10 dm800se user.info kernel: [ 301.415000] bcm4506: signal_strength -691.93dbm
Dec 7 22:14:10 dm800se user.warn kernel: [ 301.494000] CEC send ok!
Dec 7 22:14:10 dm800se user.warn kernel: [ 301.609000] CEC send ok!
Dec 7 22:14:11 dm800se user.info kernel: [ 302.414000] bcm4506: signal_strength -1129.15dbm
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.798000] start pcr0 on dmx 3 pid:ff index 5
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.801000] start audio on dmx 3 pid:103
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.801000] audio xpt start
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.801000] sync is off so we enable it
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.802000] demux-index 3 pcr0pid ff
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.802000] using 5 as pcr0 pidchannel
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.804000] AC3
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.804000] audio: decoder start 0
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.808000] video delay 0 (0 ms)
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.808000] total video delay: 0 (0 ms)
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.810000] VIDEO0: set streamtype!
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.810000] set H264
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.811000] sw rave disabled!
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.811000] audio delay 18000 (200 ms)
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.812000] total video delay: 18000 (200 ms)
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.814000] start video0 on dmx 3 pid:ff
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.814000] total video delay: 18000 (200 ms)
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.818000] VIDEO0: start decode
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.861000] RAP first pts 0xcd5aba78, stc 0x164c07cc8, pcr valid
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.862000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.865000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.869000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.873000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.877000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.info kernel: [ 302.879000] bcm4506: signal_strength -116.27dbm
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.881000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.info kernel: [ 302.885000] bcm4506: signal_strength -116.27dbm
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.885000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.889000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.info kernel: [ 302.891000] bcm4506: signal_strength -116.27dbm
Dec 7 22:14:11 dm800se user.warn kernel: [ 302.894000] audio_cdb_itb_error_isr! underflow
Dec 7 22:14:11 dm800se user.info kernel: [ 303.023000] bcm4506: signal_strength -116.61dbm
Dec 7 22:14:11 dm800se user.info kernel: [ 303.028000] bcm4506: signal_strength -116.61dbm
Dec 7 22:14:11 dm800se user.info kernel: [ 303.033000] bcm4506: signal_strength -116.61dbm
Dec 7 22:14:12 dm800se user.info kernel: [ 303.350000] bcm4506: signal_strength -118.33dbm
Dec 7 22:14:12 dm800se user.info kernel: [ 303.355000] bcm4506: signal_strength -118.33dbm
Dec 7 22:14:12 dm800se user.info kernel: [ 303.419000] bcm4506: signal_strength -118.33dbm
Dec 7 22:14:12 dm800se daemon.debug CCcam: EMM: not interested in 09C4:000000
Dec 7 22:14:12 dm800se daemon.debug CCcam: EMM: not interested in 098C:000000
Dec 7 22:14:12 dm800se user.warn kernel: [ 303.661000] ch0: lock
Dec 7 22:14:13 dm800se user.info kernel: [ 304.422000] bcm4506: signal_strength -116.30dbm
Dec 7 22:14:13 dm800se user.warn kernel: [ 304.666000] VIDEO0: first pts 0x164c41820
Dec 7 22:14:13 dm800se user.warn kernel: [ 304.666000] VIDEO0: resolution changed (1920 1080)
Dec 7 22:14:13 dm800se user.warn kernel: [ 304.817000] enable tsm0
Dec 7 22:14:14 dm800se user.info kernel: [ 305.370000] bcm4506: signal_strength -118.91dbm
Dec 7 22:14:14 dm800se user.info kernel: [ 305.377000] bcm4506: signal_strength -118.91dbm
Dec 7 22:14:14 dm800se user.info kernel: [ 305.427000] bcm4506: signal_strength -118.91dbm
Dec 7 22:14:14 dm800se user.warn kernel: [ 305.866000] VIDEO0: progressive changed (0)

- - - - - - - - - -

ja habs igendwie nicht hinbekommen ständig fehlermeldung zu viele zeichen
zu viele zeichen usw.

 

[cojo]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

häng die lpg datei doch eich hier an,bei antwrtetn auf erweitert klcken und da anhängen

 

[chiefobrei]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

ja habs igendwie nicht hinbekommen ständig fehlermeldung zu viele zeichen
zu viele zeichen usw.

Datei auf externem Filehoster hochladen und hierher verlinken.

 

[montiee]

& fehler gefunden?

 

[cojo]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

bau mal alles ab,HDD raus,USB Stick ab,also blankes Image booten.
USB Stick mit stromversogtem Hub angeschlossen?

 

[Pilot]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

@montiee:
Das wird so nichts.
Keiner lädt das herunter.
Du mußt das so machen.
Kopier dir das direkt hier her in einen Spoiler.
Spoiler so: Drück auf Auntworten, rechts auf erweitert, Onen im Menü findest du spoiler. Da drauf drücken, Dann Enter. In die Lücke kopiert du alles rein.

 

[cojo]

AW: Dreambox 800se Clone bei Kanlaliste (Channel Selection) kein Wlan/Lan Empfang

das ist zuviel zum spoilern
Habs mal als direktlink und rar angehängt,besser wie Fremdhoster
Wie sind eigentlich deine Tunereinstellungen?