danke, werde ich gleich wenn ich heute von der arbeit kommen ausprobieren...werde dann berichten ob es geklappt hat.
Kann mir bitte jemand das auf deutsch übersetzen oder hat mir bitte jemand vielleicht ne deutsche anleitung,mein englisch ist katastrophe...danke schön.
This can be done in 2 ways.
1) You have to have a working dreambox.
2) DM800_repair, you alter dreamup to be able to use greyed buttons.
Now for the first sollution.
1) Connect working dreambox DM600/
DM800.
2) Open dreamup, press connect.
3) When dreambox is found by dreamup, insert Null-Modem cable in
the broken dreambox.
4) Press flash button, and chose a firmware.
5) The flash progress will probably hang, its OK.
6) Open dreamup again, connect the broken box, press connect.
7) If all went ok, you can now flash box again, (Use only serial
communication)
Now for the second sollution
1) Connect broken dreambox DM600/
DM800
2) Open dreamup, press connect.
3) When you see second loader error popup, just press ok.
4) Open
5) Drag DM800_repair in front of dreamup, and press dream multimedia logo.
6) Now press the greyed Flash button, and chose firmware.
7) The flash progress will probably hang, its OK.
8) Open dreamup again, connect the broken box, press connect.
9) If all went ok, you can now flash box again, (Use only serial
communication)
habe es soweit gebracht das dreamup das banner box flashen drücken kann und eine software auswählen kann aber es kommt eine fehlerméldung datei zu gross muss ich was anderes inspielen ?habe es auch nur mit bootloader einspielen versucht immer datei zu gross
aja hab vergessen zu erwähnen das unter dreambox image keine firmware angezeigt wird nur unter dreambox NAND-IMAGE was ist das denn?