dm500 Reader D09

[hchfhfghxhxfd]

dm500 Reader K09

Hallo,

Gibt es einen externen Cardreader für die dm500-C,sollte nach
Möglichkeit Kdg K09 Karten lesen können?
Möchte den Reader an Newcs betreiben.
Existiert eigentlich eine art externer ci-Schacht für die Dream?

Danke schon einmal für eure mühe

 

[Phantom]

AW: dm500 Reader D09

Ein MasterCRD oder auch Progbee sollte da kein Problem sein. Akte aber beim Progbee darauf, das er 3,57 und den 6 MHz Modus unterstützt.

 

[hchfhfghxhxfd]

AW: dm500 Reader D09

Bist ja Supi,was würdest Du nehmen?
Ist jetzt frech aber hast Du einen Link zu einem Shop,der
auf Deine Empfehlung verlinkt?
Da ich einfach zu unsicher bin,nicht zu faul zum suchen.

Merci

 

[Phantom]

AW: dm500 Reader D09

Schau mal hier

Sie müssen registriert sein, um Links zu sehen.

 

[hchfhfghxhxfd]

AW: dm500 Reader D09

Habe jetzt den Smartmouse Phoenix 3,58 und 6 MHZ Jumper.
Bekomme Ihn aber nicht zum laufen wie muss ich den Jumpern,
ist keine Anleitung dabei?
Wenn ich meine PW Karte einschiebe leuchtet die gelbe LED
dauerhaft,grün und rot wechseln sich ab.
Bei der K09 Karte dasselbe entferne ich die Karte habe ich bei der Webifo
von Newcs 1.65 einen grünen haken.

newcs.xml

<device>
<name>smargo</name>
<type>phoenix</type>
<mhz>600</mhz>
<parity>Even</parity>
<node>/dev/tts/0</node>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockc0>No</blockc0>
<boxkey>04443B3A</boxkey>
<crypto-special>Yes</crypto-special>
<PTShandshake>Yes</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34002</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>Yes</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<id>0000</id>
<id>0001</id>
<id>0002</id>
</allow>
<deny>
<id>0003</id>
<id>0004</id>
<id>0005</id>
</deny>
</sid>

<priority>round</priority>

</device>
</readers>

Hat Jemand eine Idee bin für jeden Vorschlag Dankbar.

 

[Phantom]

AW: dm500 Reader D09

Nehme mal diese Config

<?xml version="1.0"?>
<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>//dev/tts/0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<!-- <device> -->
<name>upper</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<!-- </device> -->
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>digital-eliteboard</name>

<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>digital-eliteboard</password>

<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>mpcs</name>
<password>dummy</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>
<readers>
<allow>lower</allow>
<allow>smargo</allow>
</readers>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>

 

[hchfhfghxhxfd]

AW: dm500 Reader D09

Habe ich probiert kein erfolg,selbes geblinke am Reader.

Meine nochmal komplett müsste doch gehen.

<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

<name>upper</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>No</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>

<device>
<name>Phoenix1</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>/dev/tts/0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockc0>No</blockc0>
<boxkey>0000000000</boxkey>
<crypto-special>Yes</crypto-special>
<PTShandshake>Yes</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34002</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<id>0000</id>
<id>0001</id>
<id>0002</id>
</allow>
<deny>
<id>0003</id>
<id>0004</id>
<id>0005</id>
</deny>
</sid>

<priority>round</priority>

</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>newcs</name>


<password>newcs</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>

<user><status>access</status>
<name>franky</name>
<password>home</password>
<hostname></hostname>
<port></port>
<au>off</au>
<sidoverride>off</sidoverride>
<spider>off</spider>
<rate>2</rate>
</user>

<user>
<name>mpcs</name>
<password>dummy</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>
<readers>
<allow>lower</allow>
<allow>smargo</allow>
</readers>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>

 

[Phantom]

AW: dm500 Reader D09

Du hast du ein externen Reader angeschlossen. Dann darf unter typ nicht SCI stehen. Das ist wichtig, da sich das Emu danach einrichtet.

<type>phoenix</type>

Testen kannst du folgende typen

phoenix, dbox, sci, dragon, sc8, mp35, smartreader, pcsc wobei sc8, sci schon mal nicht geht. Teste mal phoenix oder dbox. Ob du den richtigen typ gewählt hast, das kannst du am log sehen.

 

[hchfhfghxhxfd]

AW: dm500 Reader D09

Du hast du ein externen Reader angeschlossen. Dann darf unter typ nicht SCI stehen. Das ist wichtig, da sich das Emu danach einrichtet.

Muss doch sci stehen ist doch der Interne oder?

 

[hchfhfghxhxfd]

AW: dm500 Reader D09

was sagt mir das jetzt?

[ 21:03:03 ] [ Sci ] NO Card ATR data detected
[ 21:03:03 ] [ Loader ] Reset failed ...
[ 21:03:03 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:03:03 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:03:03 ] [ Sci ] Opening device /dev/sci0
[ 21:03:03 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:03:03 ] [ Loader ] Reset failed ...
[ 21:03:03 ] [ Loader ] Reader type 6 on node /dev/tts/0
[ 21:03:03 ] [ Sci ] Closing device /dev/tts/0 [Handle=3]
[ 21:03:03 ] [ Sci ] Opening device /dev/tts/0
[ 21:03:03 ] [ Sci ] resetting card now
[ 21:03:03 ] [ Sci ] Card reset
[ 21:03:10 ] [ Sci ] No ATR received. resetting again
[ 21:03:17 ] [ Sci ] NO Card ATR data detected
[ 21:03:17 ] [ Loader ] Reset failed ...
[ 21:03:17 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:03:17 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:03:17 ] [ Sci ] Opening device /dev/sci0
[ 21:03:17 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:03:17 ] [ Loader ] Reset failed ...
[ 21:03:17 ] [ Loader ] Reader type 6 on node /dev/tts/0
[ 21:03:17 ] [ Sci ] Closing device /dev/tts/0 [Handle=3]
[ 21:03:17 ] [ Sci ] Opening device /dev/tts/0
[ 21:03:17 ] [ Sci ] resetting card now
[ 21:03:17 ] [ Sci ] Card reset
[ 21:03:25 ] [ Sci ] No ATR received. resetting again
[ 21:03:32 ] [ Sci ] NO Card ATR data detected
[ 21:03:32 ] [ Loader ] Reset failed ...
[ 21:03:32 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:03:32 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:03:32 ] [ Sci ] Opening device /dev/sci0
[ 21:03:32 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:03:32 ] [ Loader ] Reset failed ...
[ 21:03:32 ] [ Loader ] Reader type 6 on node /dev/tts/0
[ 21:03:32 ] [ Sci ] Closing device /dev/tts/0 [Handle=3]
[ 21:03:32 ] [ Sci ] Opening device /dev/tts/0
[ 21:03:32 ] [ Sci ] resetting card now
[ 21:03:32 ] [ Sci ] Card reset
[ 21:03:40 ] [ Sci ] No ATR received. resetting again
[ 21:03:47 ] [ Sci ] NO Card ATR data detected
[ 21:03:47 ] [ Loader ] Reset failed ...
[ 21:03:47 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:03:47 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:03:47 ] [ Sci ] Opening device /dev/sci0
[ 21:03:47 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:03:47 ] [ Loader ] Reset failed ...
[ 21:03:47 ] [ Loader ] Reader type 6 on node /dev/tts/0
[ 21:03:47 ] [ Sci ] Closing device /dev/tts/0 [Handle=3]
[ 21:03:47 ] [ Sci ] Opening device /dev/tts/0
[ 21:03:47 ] [ Sci ] resetting card now
[ 21:03:47 ] [ Sci ] Card reset
[ 21:03:55 ] [ Sci ] No ATR received. resetting again
[ 21:04:02 ] [ Sci ] NO Card ATR data detected
[ 21:04:02 ] [ Loader ] Reset failed ...
[ 21:04:02 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:04:02 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:04:02 ] [ Sci ] Opening device /dev/sci0
[ 21:04:02 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:04:02 ] [ Loader ] Reset failed ...
[ 21:04:02 ] [ Loader ] Reader type 6 on node /dev/tts/0
[ 21:04:02 ] [ Sci ] Closing device /dev/tts/0 [Handle=3]
[ 21:04:02 ] [ Sci ] Opening device /dev/tts/0
[ 21:04:02 ] [ Sci ] resetting card now
[ 21:04:02 ] [ Sci ] Card reset
[ 21:04:10 ] [ Sci ] No ATR received. resetting again
[ 21:04:17 ] [ Sci ] NO Card ATR data detected
[ 21:04:17 ] [ Loader ] Reset failed ...
[ 21:04:17 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:04:17 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:04:17 ] [ Sci ] Opening device /dev/sci0
[ 21:04:17 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:04:17 ] [ Loader ] Reset failed ...
[ 21:04:17 ] [ Loader ] Reader type 6 on node /dev/tts/0
[ 21:04:17 ] [ Sci ] Closing device /dev/tts/0 [Handle=3]
[ 21:04:17 ] [ Sci ] Opening device /dev/tts/0
[ 21:04:17 ] [ Sci ] resetting card now
[ 21:04:17 ] [ Sci ] Card reset
[ 21:04:24 ] [ Sci ] No ATR received. resetting again
[ 21:04:32 ] [ Sci ] NO Card ATR data detected
[ 21:04:32 ] [ Loader ] Reset failed ...
[ 21:04:32 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:04:32 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:04:32 ] [ Sci ] Opening device /dev/sci0
[ 21:04:32 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:04:32 ] [ Loader ] Reset failed ...
[ 21:04:32 ] [ Loader ] Reader type 6 on node /dev/tts/0
[ 21:04:32 ] [ Sci ] Closing device /dev/tts/0 [Handle=3]
[ 21:04:32 ] [ Sci ] Opening device /dev/tts/0
[ 21:04:32 ] [ Sci ] resetting card now
[ 21:04:32 ] [ Sci ] Card reset
[ 21:04:39 ] [ Sci ] No ATR received. resetting again
[ 21:04:47 ] [ Sci ] NO Card ATR data detected
[ 21:04:47 ] [ Loader ] Reset failed ...
[ 21:04:47 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 21:04:47 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 21:04:47 ] [ Sci ] Opening device /dev/sci0
[ 21:04:47 ] [ Sci ] Could not open device /dev/sci0 [Might be in use by another process?]
[ 21:04:47 ] [ Loader ] Reset failed ...
[ 21:04:47 ] [ Loader ] Reader type 6 on node /dev/tts/0
[ 21:04:47 ] [ Sci ] Closing device /dev/tts/0 [Handle=3]
[ 21:04:47 ] [ Sci ] Opening device /dev/tts/0
[ 21:04:47 ] [ Sci ] resetting card now
[ 21:04:47 ] [ Sci ] Card reset

 

[AZK24]

AW: dm500 Reader D09

probiermal diese als node mit deine config:

<node>/dev/ttyS0</node>