DBox als server ipbox900 als Client

würde mich sehr freuen auf Eure Hilfe und danke im vorraus dafür.
habe gerade auf meiner DBox 2 kabel einen Multicam eingebaut und kann die I02 Karte mit CCcam 2.011, Newcs 1.62 nutzen und die Programme sehen, jetzt möchte ich noch auf meine IPBox 900 mit mcamd, mbox, und nwecs , dann möchte ich auch mein PC mit einer kabelKarte und Progdvb nutzen, Wer könnte mir dazu die Configs schreiben oder zuschicken?
was brauche ich wo?
Gruß

AW: DBox als server ipbox900 als Client

Wenn du mit der IP Box via MGcamd auf dein Newcs Server zugreifen möchtest, so musst du die vorgefertigte Config nur anpassen. In der Newcs füge einfach ein weiteren User hinzu.

AW: DBox als server ipbox900 als Client

anbei lege ich die config dateien meines servers bitte höflich um Korrektur wenn was nicht in Ordnung ist
CCcam.conf:
F:dummy dummy 2 0 1 { 0:0:2 }
F:dummy1 dummy1 2 0 1 { 0:0:2 }
N: 127.0.0.1 20248 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 20248 dummy1 dummy1 01 02 03 04 05 06 07 08 09 10 11 12 13 14

newcs.xml:
<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;smartreader+&quot;>
<device>
<name>smargo</name>
<type>smartreader+</type>
<mhz>600</mhz>
<node>/dev/usb/tts/0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000</ipk>
<ucpk>000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>dummy</name>
<password>dummy</password>
<name>dummy1</name>
<password>dummy1</password>

<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><name>server</name><password>server</password><hostname></hostname><p
ort></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rat
e>2</rate></user>

Newcs.xml für CA (SCI) (Dreambox)
<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;Card Readers&quot;>
<device>
<name>lower</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000</ipk>
<ucpk>000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<!-- <device> -->
<name>upper</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000</ipk>
<ucpk>000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<!-- </device> -->
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>...............................</name>

<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>.........................</password>

<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>mpcs</name>
<password>dummy</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>
<readers>
<allow>lower</allow>
<allow>smargo</allow>
</readers>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>


Newcs Config Multicam (Dbox)
<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;Card Readers&quot;>
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>

</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>dummy</name>


<password>dummy</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.8</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>elite</name>
<password>board</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
</newcamdserver>


Newcs Config Externer Reader (Dbox)
<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;Card Readers&quot;>
<device>
<name>CardReader</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>dummy</name>


<password>dummy</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.8</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<name>dummy1</name>
<password>dummy1</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>

mein Server auf der DBox2 mit Multicam Funktioniert leider die Clients nicht

AW: DBox als server ipbox900 als Client

Warum hast du mir jetzt 2 Newcs.xml gepostet ?????. Nutze bitte bei mehrere Configs die Code Option. Das macht es einfacher alles auseinander zuhalten.

AW: DBox als server ipbox900 als Client

das ist eine newcs. config, ich glaube sie ist einfach zu lang oder? :OO

AW: DBox als server ipbox900 als Client

Eine newcs, nein, das sind 4.

<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;smartreader+&quot;>
<device>
<name>smargo</name>
<type>smartreader+</type>
<mhz>600</mhz>
<node>/dev/usb/tts/0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 0000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
000000000000000000000000000000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
0000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>dummy</name>
<password>dummy</password>
<name>dummy1</name>
<password>dummy1</password>

<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><name>server</name><password>server</password><hostname></hostname><p
ort></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rat
e>2</rate></user>

Zum Vergrößern anklicken....

Das ist eine, nur das ende fehlt

<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;Card Readers&quot;>
<device>
<name>lower</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 0000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
000000000000000000000000000000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
0000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<!-- <device> -->
<name>upper</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 0000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
000000000000000000000000000000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
00000000000000000000000000000000000000000000000000 0000000000000000000000000
0000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<!-- </device> -->
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>...............................</name>

<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>.........................</password>

<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>mpcs</name>
<password>dummy</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>
<readers>
<allow>lower</allow>
<allow>smargo</allow>
</readers>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>

Zum Vergrößern anklicken....

Das ist die zweite

<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;Card Readers&quot;>
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>

</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>dummy</name>


<password>dummy</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.8</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>elite</name>
<password>board</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
</newcamdserver>

Zum Vergrößern anklicken....

Hier die vierte und eigentlich richtige

<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;Card Readers&quot;>
<device>
<name>CardReader</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>dummy</name>


<password>dummy</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.8</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<name>dummy1</name>
<password>dummy1</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>

Zum Vergrößern anklicken....

Das war die letzte.

Ja, ich würde sagen, die war zulang .

Ist aber kein Problem, dafür bist du hier, um es zu lernen. Nehme diese Config

<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;Card Readers&quot;>
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>20248</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>

</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>dummy</name>


<password>dummy</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.8</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>elite</name>
<password>board</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
</newcamdserver>

In dein CCcam füge dann ein

N: 127.0.0.1 20248 elite board 01 02 03 04 05 06 07 08 09 10 11 12 13 14

AW: DBox als server ipbox900 als Client

erstmal danke sehr für die Hilfe
habe jetzt auf meiner Dbox2 mit Multicam folgende Einstellungen

1.CCcam.cfg
F:dummy dummy 2 0 1 { 0:0:2 }
F:dummy1 dummy1 2 0 1 { 0:0:2 }
N:127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

2.newcs.xml
<?xml version=&quot;1.0&quot;?>
<newCSconfig>
<readers name=&quot;Card Readers&quot;>
<device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>dummy</name>
<password>dummy</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.8</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<name>elite</name>
<password>board</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
<name>dummy</name>
<password>dummy</password>
</newcamdserver>

hoffe habe keine Fehler gemacht weil leider die Clients laufen nicht