D09 - Kdg HD ja, SD nein

[GTD Bastion]

AW: D09 - Kdg HD ja, SD nein

Hier mal mein Oscam.user:

[account]
user = dvbapi
pwd = 
group = 1,2
au = 1
caid = 1702,0D95,0622
suppresscmd08 = 1
cccmaxhops = 0
cccreshare = 0

Musst du dir halt auf deine Bedürfnisse anpassen.
Wozu cccam? Das brauchst du nicht zwingend----

Kannst dir im Oscam einen Proxy Reader....hier mal eineConfig für Sky Karte:

[reader]
label = sky
enable = 1
protocol = cccam
device = 192.168.2.153,34010
user = user
password = passwort
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833,1843
group = 2
emmcache = 1,3,2
lb_weight = 100
cccversion = 2.2.1
cccmaxhops = 2
ccckeepalive = 1
auprovid = 001702

 

[bombadil]

Ich hatte eben auch noch weitergelesen. Bin auch schon in der Richtung mich von cccam zu verabschieden. Ich muß dann doch cccam Server in oscam aktivieren

oscam.conf

Spoiler

[cccam]
port = 12000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
version = 2.2.1
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0

Die F-Line zum Client, z.B. zu meiner DM8000

oscam.user

[account]
user = dm8000
pwd = dm8000
group = 1,2
hostname = 192.168.2.3
cccmaxhops = 2
cccreshare = 1

so lese ich die Karten ein, bzw ne C-Line (natürlich angepasst)

oscam.server

[reader]
label = server1
enable = 1
protocol = cccam
device = dyndns.com,12000
account = user
password = passwd
reconnecttimeout = 30
group = 1
cccversion = 2.1.4
cccmaxhops = 2
cccmindown = 1
cccwantemu = 0
ccckeepalive = 1

dazu DVBapi aus dem post von vorhin. Bin ich da auf dem richtigen Weg?

Könnte das so für mich richtig sein?

oscam.conf

Spoiler

[global]
serverip             =   
cachedelay           =   0
logfile              =   /var/log/oscam.log #   ÄNDERUNG - CHANGE - MODIFICATIONS - MODIFICA  03/28/2011
disablelog           =   0
maxlogsize           =   512
disableuserfile      =   
usrfile              =   /var/log/oscamuser.log
usrfileflag          =   0
cwlogdir             =   /var/log/cw.log
clienttimeout        =   7
fallbacktimeout      =   5
clientmaxidle        =   120
bindwait             =   120
netprio              =   0
resolvegethostbyname =   
clientdyndns         =   1 # [COLOR=Red]muss zum sharen aktiviert werden, richtig?[/COLOR]
failbantime          =      # IP Adresse wird für n Minuten geblockt. Neue Loginversuche werden ignoriert auch wenn das Login OK wäre. Es wird kein Clientthread erstellt.
failbancount         =   
sleep                =   0
unlockparental       =   0
nice                 =   -1
serialreadertimeout  =   
waitforcards         =   1
preferlocalcards     =   1
readerrestartseconds =   
saveinithistory      =   1
double_check         =   
lb_mode              =   3
lb_save              =   
lb_nbest_readers     =   
lb_nfb_readers       =
lb_nbest_percaid     =    #   NEU - NEW - NOUVEAU - NUOVO svn 4787:03/04/2011
lb_min_ecmcount      =   
lb_max_ecmcount      =   
lb_reopen_seconds    =   
lb_retrylimit        =
lb_savepath          =   
lb_stat_cleanup      =   
lb_use_locking       =

[monitor]
port                 = 16667
serverip             = 
nocrypt              =
aulow                = 
monlevel             = 2
hideclient           =
appendchaninfo       = 1

[webif]               
httpport              = 16666
httpcert              =
httpuser              = oscam
httppwd               = oscam
httpcss               =
httptpl               =
httprefresh           = 15
httphideidleclients   = 0
httpscript            =
httpallowed           = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns            =
httpsavefullcfg       = 0
httpreadonly          = 0
httphelplang          =

[dvbapi]
enabled              = 1
au                   = 1
boxtype              = dreambox
user                 = dvbapi

[cccam]
port = 12000
reshare = 1
forward_origin_card = 0 # oder 1, damit es wie cccam Server arbeitet
ignorereshare = 0
version = 2.2.1
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
###################################################################

oscam.server

[reader]
label        = skyhd
protocol     = internal
device       = /dev/sci0
Mhz          = 600
cardmhz      = 600
group        = 1
services     = skyhd-mapping
detect       = CD
CAID         = 1722,1834
EMMCache     = 1,3,2
lb_weight    = 100

[reader]
Label        = D09
Protocol     = internal
Device       = /dev/sci1
Mhz          = 600
cardmhz      = 600
Detect       = CD
Group        = 2
services     =
CAID         = 1722,1834
EMMCache     = 1,3,2
rsakey       = 8A5................711
boxkey       = 666........47B
lb_weight    = 100

[reader]
Label        = sky_kabelhome
Protocol     = smartreader+
Device       = /dev/ttyUSB0
Mhz          = 600
cardmhz      = 600
Detect       = CD
Group        = 3
CAID         = 1722
EMMCache     = 1,3,2
lb_weight    = 100

[reader]
label = Name Sharepartner
enable = 1
protocol = cccam
device = dyndns.com,12000 # Adresse und Port vom Share
account = user # angepasst
password = passwd # angepasst
reconnecttimeout = 30
group = 4
cccversion = 2.2.1
cccmaxhops = 2
cccmindown = 1
cccwantemu = 0
ccckeepalive = 1

oscam.user

[account]
user                   = dvbapi
pwd                    = 
group                  = 1,2,3,4
au                     = skyhd,D09,sky_kabelhome # wenn alle au bekommen sollen
caid                   = 1722,1834
betatunnel             = 1834:1722 # für SkyHD

###HomeCS### z.B. meine DM8000
[account]
user = dm8000
pwd = dm8000
group = 1,2,3,4
hostname = 192.168.2.3 
cccmaxhops = 2
cccreshare = 1

###InetCS###
[account]
user = user
pwd = userpass
group = 1,2,3,4
hostname = meine Dyndns
cccmaxhops = 2
cccreshare = 1

oscam.dvbapi

P: 1722 # prio Sky D02, Kabel SD
P: 1834 # prio Sky HD, Kabel HD

@1Tx
könntest du da mal vorweg deine geschulten Augen drüber fliegen lassen, ich kanns im Augenblick nicht testen, muß morgen ausnahmsweise mal früh raus zur Arbeit, dafür komme ich dann spät nach Hause. Gleicht sich halt alles irgendwie wieder aus.
So long

 

[GTD Bastion]

AW: D09 - Kdg HD ja, SD nein

Also...vereinfachen wir das mal.

Du brauchst auf deinem Server...deiner DM nur Oscam Only.
Ich gebe dir mal meine komplette Config von meiner Dreambox:

Spoiler

Oscam.conf

[global]
serverip                      = 192.168.2.200
usrfile                       = /var/log/oscamuser.log
logfile                       = /var/log/oscam.log
cwlogdir                      = /var/log/cw
preferlocalcards              = 1
saveinithistory               = 1

[newcamd]
port                          = 36000@1722:000000;36001@1834:000000
serverip                      = Deine IP!
key                           = 0102030405060708091011121314
allowed                       = 127.0.0.1,0.0.0.0-255.255.255.254
keepalive                     = 1
mgclient                      = 0

[cccam]
port                          = 12000
reshare                       = 1
ignorereshare                 = 0
version                       = 2.0.11
updateinterval                = 240
minimizecards                 = 0
keepconnected                 = 1
stealth                       = 0
reshare_mode                  = 0

[dvbapi]
enabled                       = 1
au                            = 1
boxtype                       = dreambox
user                          = dvbapi
pmt_mode                      = 0
request_mode                  = 0

[webif]
httpport                      = 16002
httpuser                      = admin
httppwd                       = admin
httprefresh                   = 0
httpallowed                   = 127.0.0.1,192.168.2.0-192.168.2.254
httphideidleclients           = 0
httpreadonly                  = 0
httpsavefullcfg               = 0

Oscam.server

[reader]
label                         = sky
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
showcls                       = 0
caid                          = 1722,1834
detect                        = cd
mhz                           = 600
cardmhz                       = 600
group                         = 1
emmcache                      = 1,3,2
lb_weight                     = 100
deprecated                    = 1
auprovid                      = 001722

[reader] 
Label        = D09 
Protocol     = internal 
Device       = /dev/sci1 
Mhz          = 368 
cardmhz      = 368 
Detect       = CD 
Group        = 2 
CAID         = 1722,1834 
EMMCache     = 1,3,2 
rsakey       = 8A..........................11 
boxkey       = 66.......7B 
lb_weight    = 100

[reader]
label                         = skyhd
enable                        = 3
protocol                      = mouse
device                        = /dev/ttyUSB0
showcls                       = 0
caid                          = 1722,1834
detect                        = cd
mhz                           = 600
cardmhz                       = 600
group                         = 1
emmcache                      = 1,3,2
lb_weight                     = 100
deprecated                    = 1
auprovid                      = 001722

Oscam.user

[account]
user                          = dvbapi
pwd                           = 
group                         = 1,2,3
monlevel                      = 0
au                            = 1
caid                          = 1722,1834
suppresscmd08                 = 1
cccmaxhops                    = 0
cccreshare                    = 0

Beispiel User:

[account]
user                          = User
pwd                           = passwort
group                         = 1
au                            = 1
caid                          = 1722,1834
suppresscmd08                 = 1
cccreshare                    = -1

Oscam.dvbapi:

P: 1722
P: 1834
I: 1861
I: 09C4
I: 09C7

Das dvbapi greift für deine Dreambox direkt die Lines ab....die CCcam kannst du komplett in der cccam.cfg deaktivieren bzw. nur noch oscam only verwenden ohne cccam emu.