AW: CCam und UM I02
ZebraDem Image 3.51 - Sagem D-BOX2 - Kernel 2.4.37-dbox2 (21:20:17)...
dbox login: root
BusyBox v1.7.2 (2009-04-24 03:11:30 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cd /var/emu
/var/emu # ls
CCcam camd2 newcs version.txt
/var/emu # bin
-sh: bin: not found
/var/emu # cd /var/bin
/var/bin # ls
capmtserver input msgbox pcamd tuxdns
/var/bin # killallnewcs -df
-sh: killallnewcs: not found
/var/bin # killall/newcs -df
-sh: killall/newcs: not found
/var/bin # killall
You need to specify whom to kill
/var/bin # newcs -df
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 21:23:17 ] [ Box detect ] Box type 4 (Dbox2)
[ 21:23:17 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not pres
ent, defaulting to NO
[ 21:23:17 ] [ Config ] Option <crypto-special> for device 0 (Phoenix on Com1) n
ot present, defaulting to NO
[ 21:23:17 ] [ Config ] Option <PTShandshake> for device 0 (Phoenix on Com1) not
present, defaulting to NO
[ 21:23:17 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix on Com1) not pre
sent, defaulting to NO
[ 21:23:17 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 21:23:17 ] [ Config ] Option <sid> for device 0 (Phoenix on Com1) not present,
no static sids added to filter
[ 21:23:17 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 21:23:17 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myS
hares) on port 1234 - 0x1008bdd8 [ op ptr 0x1008cdf0 ]
[ 21:23:17 ] [ DNS ] Resolved Hostname localhost to: 127.0.0.1
[ 21:23:17 ] [ Newcamd ] Server name : newcs
[ 21:23:17 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 21:23:17 ] [ Config ] Option <hostname> or <port> not present for User: dummy,
DISABLING reverse login
[ 21:23:17 ] [ Config ] Option <readers> not present for User: dummy, NO reader
control enabled
[ 21:23:17 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host none, Port: 0, Au: On,
Spider allowed: No, Sidoverride: No, level: 1
[ 21:23:17 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 21:23:17 ] [ EMM Cache ] Initialising dynamic Cache
[ 21:23:17 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 299
[ 21:23:17 ] Calibrating delay loops
[ 21:23:17 ] usleep(5) takes: 0 s 38 us
[ 21:23:17 ] usleep(10) takes: 0 s 38 us
[ 21:23:17 ] usleep(100) takes: 0 s 132 us
[ 21:23:17 ] usleep(500) takes: 0 s 529 us
[ 21:23:17 ] Allocation memory for 200 regular users
[ 21:23:17 ] [ Loader ] Starting Telnet on port 1001
[ 21:23:17 ] [ SockSrv ] Server thread started
Can't create server: Address already in use
[ 21:23:17 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 21:23:17 ] [ CardMan ] Reseting reader parameters
[ 21:23:17 ] [ Phoenix ] Opening device /dev/ttyS0
[ 21:23:17 ] [ Phoenix ] Could not get device /dev/ttyS0
[ 21:23:17 ] [ Loader ] Reset failed ...
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ SockSrv ] Could not Bind to port 1001 EXITING!
[ 21:23:17 ] [ SockSrv ] Stopping port 1001
[ 21:23:17 ] [ Card queue /dev/ttyS0 ] Starting...
[ 21:23:17 ] [ Loader ] Starting Newcamd Server on port 15050
[ 21:23:17 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ Newcamd ] Stopping port 15050
[ 21:23:17 ] [ Loader ] Starting Radegast Server on port 10001
[ 21:23:17 ] bind: error! 98: Address already in use
[ 21:23:17 ] [ SockSrv ] Could not Bind to port 10001 EXITING!
[ 21:23:17 ] [ SockSrv ] Stopping port 10001
[ 21:23:17 ] [ SockSrv ] Server thread started
[ 21:23:17 ] [ NewCS ] Ready to GO!
/var/bin # Chameleon2 bind: Address already in use
DD
