brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

mit der Einstellung

autospeed = 0
mhz = 368 cardmhz = 2700

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Tue Nov 18 18:37:23 2014
-------------------------------------------------------------------------------
2014/11/18 18:37:23 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2014/11/18 18:37:23 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 824
2014/11/18 18:37:23 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/11/18 18:37:23 0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2014/11/18 18:37:23 0 s signal handling initialized
2014/11/18 18:37:23 0 s 831 service-id's loaded in 26ms
2014/11/18 18:37:23 0 s 4 provid's loaded
2014/11/18 18:37:23 0 s cs357x: initialized (fd=6, port=40000)
2014/11/18 18:37:23 0 s cccam: initialized (fd=7, port=12000)
2014/11/18 18:37:23 0 s skyv13 [internal] creating thread for device /dev/sci0
2014/11/18 18:37:23 0 s hdplus02 [internal] creating thread for device /dev/sci1
2014/11/18 18:37:23 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/18 18:37:23 0 s waiting for local card init
2014/11/18 18:37:23 C5FAD0 r skyv13 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/11/18 18:37:23 76B00468 r hdplus02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.68 MHz
2014/11/18 18:37:23 C617D0 h webif: decompressed 69662 bytes back into 195704 bytes
2014/11/18 18:37:23 C617D0 h HTTP Server running. ip=0.0.0.0 port=17000
2014/11/18 18:37:24 76B00468 r hdplus02 [internal] card detected
2014/11/18 18:37:25 76B00468 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:37:25 76B00468 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:37:25 76B00468 r hdplus02 [internal] TEST tempo mhz check = 368 mhz
2014/11/18 18:37:25 76B00468 r hdplus02 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2014/11/18 18:37:25 76B00468 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:37:25 76B00468 r hdplus02 [internal] Card responded ok for ifsd request of 160
2014/11/18 18:37:26 76B00468 r hdplus02 [internal] detect native nagra card
2014/11/18 18:37:29 76B00468 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 18:37:30 76B00468 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/18 18:37:32 76B00468 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:37:32 76B00468 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:37:32 76B00468 r hdplus02 [internal] TEST tempo mhz check = 385 mhz
2014/11/18 18:37:32 76B00468 r hdplus02 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2014/11/18 18:37:32 76B00468 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:37:32 76B00468 r hdplus02 [internal] Card responded ok for ifsd request of 160
2014/11/18 18:37:32 76B00468 r hdplus02 [internal] card system not supported
2014/11/18 18:37:32 76B00468 r hdplus02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/18 18:37:33 76B00468 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:37:33 76B00468 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:37:33 76B00468 r hdplus02 [internal] TEST tempo mhz check = 385 mhz
2014/11/18 18:37:33 76B00468 r hdplus02 [internal] Calculated work ETU is 110.39 us reader mhz = 337
2014/11/18 18:37:33 76B00468 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:37:35 76B00468 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/18 18:37:36 76B00468 r hdplus02 [internal] detect native nagra card
2014/11/18 18:37:38 76B00468 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 18:37:40 76B00468 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/18 18:37:41 76B00468 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:37:41 76B00468 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:37:41 76B00468 r hdplus02 [internal] TEST tempo mhz check = 337 mhz
2014/11/18 18:37:41 76B00468 r hdplus02 [internal] Calculated work ETU is 9.50 us reader mhz = 337
2014/11/18 18:37:41 76B00468 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:37:41 76B00468 r hdplus02 [internal] Card responded ok for ifsd request of 160
2014/11/18 18:37:44 76B00468 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 18:37:48 76B00468 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] TEST tempo mhz check = 337 mhz
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] Calculated work ETU is 9.50 us reader mhz = 337
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] Card responded ok for ifsd request of 160
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] card system not supported
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/18 18:37:49 76B00468 r hdplus02 [internal] card initializing error
2014/11/18 18:37:50 0 s init for all local cards done
2014/11/18 18:37:50 0 s anti cascading disabled
2014/11/18 18:37:50 76B022E0 c plain dvbapi-client granted (anonymous, au=off)
2014/11/18 18:37:50 76B022E0 c [DVBAPI] Error in oscam.dvbapi: ret=-1 | p: 0000 000000 0000 10000
2014/11/18 18:37:50 0 --- Skipped 1 duplicated log lines ---
2014/11/18 18:37:50 76B022E0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/11/18 18:37:51 76B022E0 c [DVBAPI] Receiver sends PMT command 3 for channel EF74
2014/11/18 18:37:51 76B022E0 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/18 18:37:51 76B022E0 c [ADD PID 0] CAID: 1830 ECM_PID: 1CEA PROVID: 000000
2014/11/18 18:37:51 76B022E0 c [ADD PID 1] CAID: 1843 ECM_PID: 19EA PROVID: 000000
2014/11/18 18:37:51 76B022E0 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BEA PROVID: 000000
2014/11/18 18:37:51 76B022E0 c [ADD PID 3] CAID: 098C ECM_PID: 1AEA PROVID: 000000
2014/11/18 18:37:51 76B022E0 c [ADD PID 4] CAID: 1860 ECM_PID: 1EEA PROVID: 000000
2014/11/18 18:37:51 76B022E0 c Found 5 ECMpids and 6 STREAMpids in PMT
2014/11/18 18:37:51 76B022E0 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/18 18:37:51 76B022E0 c New program number: EF74 (SAT.1 HD) [pmt_list_management 3]
2014/11/18 18:37:51 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:51 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:51 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:51 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:52 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:52 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:52 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:53 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:53 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:53 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:54 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:54 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:54 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:54 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:55 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:55 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:55 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:56 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:56 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:56 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:57 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:57 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/18 18:37:57 76B022E0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/18 18:37:57 76B022E0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

hier nochmal der kompl. Log

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

hier der Log von der Einstellung

Spoiler

[reader]label = hdplus02
enable = 1
protocol = internal
device = /dev/sci1
caid = 1843
rsakey = BF...D5
boxkey = A7...7C
detect = cd
mhz = 540
cardmhz = 2700
group = 2
emmcache = 1,3,2

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Tue Nov 18 18:16:32 2014
-------------------------------------------------------------------------------
2014/11/18 18:16:32 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2014/11/18 18:16:32 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 826
2014/11/18 18:16:32 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/11/18 18:16:32 0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2014/11/18 18:16:32 0 s signal handling initialized
2014/11/18 18:16:32 0 s 831 service-id's loaded in 28ms
2014/11/18 18:16:32 0 s 4 provid's loaded
2014/11/18 18:16:32 0 s cs357x: initialized (fd=6, port=40000)
2014/11/18 18:16:32 0 s cccam: initialized (fd=7, port=12000)
2014/11/18 18:16:32 0 s skyv13 [internal] creating thread for device /dev/sci0
2014/11/18 18:16:32 0 s hdplus02 [internal] creating thread for device /dev/sci1
2014/11/18 18:16:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/18 18:16:32 0 s waiting for local card init
2014/11/18 18:16:32 C5DAD0 r skyv13 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/11/18 18:16:32 C83020 r hdplus02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz
2014/11/18 18:16:32 C5F7D0 h webif: decompressed 69662 bytes back into 195704 bytes
2014/11/18 18:16:32 C5F7D0 h HTTP Server running. ip=0.0.0.0 port=17000
2014/11/18 18:16:33 C83020 r hdplus02 [internal] card detected
2014/11/18 18:16:34 C83020 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:16:34 C83020 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:16:34 C83020 r hdplus02 [internal] TEST tempo mhz check = 500 mhz
2014/11/18 18:16:34 C83020 r hdplus02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/18 18:16:34 C83020 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:16:34 C83020 r hdplus02 [internal] Card responded ok for ifsd request of 160
2014/11/18 18:16:35 C83020 r hdplus02 [internal] detect native nagra card
2014/11/18 18:16:37 C83020 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 18:16:38 C83020 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/18 18:16:40 C83020 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:16:40 C83020 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:16:40 C83020 r hdplus02 [internal] TEST tempo mhz check = 500 mhz
2014/11/18 18:16:40 C83020 r hdplus02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/18 18:16:40 C83020 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:16:40 C83020 r hdplus02 [internal] Card responded ok for ifsd request of 160
2014/11/18 18:16:40 C83020 r hdplus02 [internal] card system not supported
2014/11/18 18:16:40 C83020 r hdplus02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/18 18:16:41 C83020 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:16:41 C83020 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:16:41 C83020 r hdplus02 [internal] TEST tempo mhz check = 500 mhz
2014/11/18 18:16:41 C83020 r hdplus02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/11/18 18:16:41 C83020 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:16:43 C83020 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/18 18:16:44 C83020 r hdplus02 [internal] detect native nagra card
2014/11/18 18:16:45 C83020 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 18:16:47 C83020 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/18 18:16:48 C83020 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 18:16:48 C83020 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 18:16:48 C83020 r hdplus02 [internal] TEST tempo mhz check = 500 mhz
2014/11/18 18:16:48 C83020 r hdplus02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/18 18:16:48 C83020 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 18:16:48 C83020 r hdplus02 [internal] Card responded ok for ifsd request of 160

 

[4gx35]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

die oscam version ist aber schon alt, welche ist es denn laut oscam webif, kann man aus der r version nicht ablesen, da modern webif,
mal im oscam webif nachgesehen, ob die überhaupt schon autospeed hat, auf jeden fall erst ein mal neue oscam installieren (siehe weblink in meiner signatur da auch oscam installieren)

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

wie bekomme ich denn ein aktuelles oscam auf die box??

 

[supraracer]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Link Removed
Runterladen, auspacken, selben Name geben wir die aktuellen OScam, aktuelle OScam stoppen, per FTP die Datei überschreiben, Box komplett neu starten.

-supraracer

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Danke aber wie und wo finde ich die Datei bei FTP?

LG

 

[dodo83]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

unter USR/BIN eventuell

 

[4gx35]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

auf Oscam Konfiguration unten in der signatur klicken,
da hättest du alles gefunden, etwas mehr zu oscam lesen könnte auch hilfreich sein

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

danke habe ich, dann wohl leider überlesen.

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

so habe eine neue Oscar version aufgespielt.

habe leider noch immer keine Funktion. die HD02 bleibt dunkel.

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Sun Nov 23 23:58:17 2014
-------------------------------------------------------------------------------
2014/11/23 23:58:17 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10003 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/11/23 23:58:17 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 714
2014/11/23 23:58:18 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/11/23 23:58:18 0 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2014/11/23 23:58:18 0 s signal handling initialized
2014/11/23 23:58:18 0 s 221 service-id's loaded in 8 ms
2014/11/23 23:58:18 0 s 154 tier-id's loaded
2014/11/23 23:58:18 0 s 4 provid's loaded
2014/11/23 23:58:18 0 s cccam: initialized (fd=6, port=12000)
2014/11/23 23:58:18 0 s s02_sky [internal] creating thread for device /dev/sci0
2014/11/23 23:58:18 0 s hd02 [internal] creating thread for device /dev/sci1
2014/11/23 23:58:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/23 23:58:18 0 s waiting for local card init
2014/11/23 23:58:18 C032D8 r s02_sky [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz
2014/11/23 23:58:18 C09FB0 r hd02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/11/23 23:58:18 C032D8 r s02_sky [internal] card detected
2014/11/23 23:58:18 C032D8 r s02_sky [internal] Card is present in readerslot!
2014/11/23 23:58:18 C09FB0 r hd02 [internal] card detected
2014/11/23 23:58:18 C09FB0 r hd02 [internal] Card is present in readerslot!
2014/11/23 23:58:18 C0EDE8 h webif: decompressed 156707 bytes back into 373872 bytes
2014/11/23 23:58:18 C0EDE8 h HTTP Server running. ip=0.0.0.0 port=17000
2014/11/23 23:58:18 C032D8 r s02_sky [internal] Set reader parameters!
2014/11/23 23:58:18 C032D8 r s02_sky [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/23 23:58:18 C09FB0 r hd02 [internal] Set reader parameters!
2014/11/23 23:58:18 C09FB0 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/23 23:58:18 C032D8 r s02_sky [internal] Reset internal cardreader!
2014/11/23 23:58:18 C09FB0 r hd02 [internal] Reset internal cardreader!
2014/11/23 23:58:19 C09FB0 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/23 23:58:19 C09FB0 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/23 23:58:19 C09FB0 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/23 23:58:19 C09FB0 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/23 23:58:20 C09FB0 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/23 23:58:20 C09FB0 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/23 23:58:20 C09FB0 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/23 23:58:20 C032D8 r s02_sky [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/11/23 23:58:20 C032D8 r s02_sky [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/11/23 23:58:20 C032D8 r s02_sky [internal] TEST tempo mhz check = 600 mhz
2014/11/23 23:58:20 C032D8 r s02_sky [internal] Calculated work ETU is 103.33 us reader mhz = 540
2014/11/23 23:58:21 C032D8 r s02_sky [internal] Sent reader settings T=14 fs=5 ETU=600 WWT=9600 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=5 I=50 U=0
2014/11/23 23:58:21 C09FB0 r hd02 [internal] detect native nagra card
2014/11/23 23:58:21 C032D8 r s02_sky [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/23 23:58:22 C032D8 r s02_sky [internal] detect irdeto tunneled nagra card
2014/11/23 23:58:22 C032D8 r s02_sky [internal] no rsa key configured -> using irdeto mode
2014/11/23 23:58:22 C032D8 r s02_sky [internal] detect irdeto card
2014/11/23 23:58:22 C032D8 r s02_sky [internal] caid: 1702, acs: 3.84, country code: GER
2014/11/23 23:58:22 C032D8 r s02_sky [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/11/23 23:58:23 C09FB0 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/23 23:58:24 C09FB0 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/23 23:58:24 C09FB0 r hd02 [internal] Card is present in readerslot!
2014/11/23 23:58:24 C09FB0 r hd02 [internal] Set reader parameters!
2014/11/23 23:58:24 C09FB0 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/23 23:58:24 C09FB0 r hd02 [internal] Reset internal cardreader!
2014/11/23 23:58:25 C032D8 r s02_sky [internal] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
2014/11/23 23:58:25 C032D8 r s02_sky [internal] active providers: 2 (000000,000000)
2014/11/23 23:58:25 C032D8 r s02_sky [internal] found card system irdeto
2014/11/23 23:58:25 C032D8 r s02_sky [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/23 23:58:26 C09FB0 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/23 23:58:26 C09FB0 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/23 23:58:26 C09FB0 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/23 23:58:26 C09FB0 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] entitlements for provider: 2, id: 000000
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05F1, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0276, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0609, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05E8, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0605, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 00F0, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 04CE, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 7D23, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0617, date: 2011/07/12 - 2012/03/22
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0606, date: 2011/06/27 - 2011/11/25
2014/11/23 23:58:26 C09FB0 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05DF, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05DD, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05F2, date: 2011/06/27 - 2011/11/25
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 000F, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05FC, date: 2011/06/27 - 2011/11/25
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 7D27, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05E7, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05FB, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 05DE, date: 2012/06/11 - 2013/02/20
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0103, date: 2008/01/19 - 2008/01/21
2014/11/23 23:58:26 C09FB0 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/23 23:58:26 C09FB0 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/23 23:58:26 C09FB0 r hd02 [internal] card system not supported
2014/11/23 23:58:26 C09FB0 r hd02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/23 23:58:26 C09FB0 r hd02 [internal] Card is present in readerslot!
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0104, date: 2008/01/19 - 2008/01/21
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0105, date: 2008/01/19 - 2008/01/21
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2014/11/23 23:58:26 C09FB0 r hd02 [internal] Set reader parameters!
2014/11/23 23:58:26 C09FB0 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/23 23:58:26 C032D8 r s02_sky [irdeto] ready for requests
2014/11/23 23:58:27 C09FB0 r hd02 [internal] Reset internal cardreader!
2014/11/23 23:58:28 C09FB0 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/23 23:58:28 C09FB0 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/23 23:58:28 C09FB0 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/23 23:58:28 C09FB0 r hd02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/11/23 23:58:28 C09FB0 r hd02 [internal] Sent reader settings T=0 fs=6 ETU=372 WWT=0 CWT=139 BWT=15371 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/23 23:58:29 C09FB0 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/23 23:58:30 C09FB0 r hd02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/23 23:58:31 C09FB0 r hd02 [internal] detect native nagra card
2014/11/23 23:58:32 C09FB0 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/23 23:58:34 C09FB0 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/23 23:58:34 C09FB0 r hd02 [internal] Card is present in readerslot!
2014/11/23 23:58:34 C09FB0 r hd02 [internal] Set reader parameters!
2014/11/23 23:58:34 C09FB0 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/23 23:58:34 C09FB0 r hd02 [internal] Reset internal cardreader!
2014/11/23 23:58:36 C09FB0 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/23 23:58:36 C09FB0 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/23 23:58:36 C09FB0 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/23 23:58:36 C09FB0 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/23 23:58:36 C09FB0 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/23 23:58:36 C09FB0 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/23 23:58:36 C09FB0 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/23 23:58:38 C09FB0 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/23 23:58:39 C09FB0 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/23 23:58:39 C09FB0 r hd02 [internal] Card is present in readerslot!
2014/11/23 23:58:39 C09FB0 r hd02 [internal] Set reader parameters!
2014/11/23 23:58:39 C09FB0 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/23 23:58:40 C09FB0 r hd02 [internal] Reset internal cardreader!
2014/11/23 23:58:41 C09FB0 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/23 23:58:41 C09FB0 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/23 23:58:41 C09FB0 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/23 23:58:41 C09FB0 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/23 23:58:41 C09FB0 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/23 23:58:42 C09FB0 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/23 23:58:42 C09FB0 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/23 23:58:42 C09FB0 r hd02 [internal] card system not supported
2014/11/23 23:58:42 C09FB0 r hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/23 23:58:42 C09FB0 r hd02 [internal] card initializing error
2014/11/23 23:58:42 0 s init for all local cards done
2014/11/23 23:58:42 0 s anti cascading disabled
2014/11/23 23:58:42 C1D418 c plain dvbapi-client granted (serverbox, au=auto (3 reader))
2014/11/23 23:58:42 C27150 c anonymous disconnected from 217.91.171.164
2014/11/23 23:58:42 C1F890 c anonymous disconnected from 80.149.99.10
2014/11/23 23:58:42 0 --- Skipped 1 duplicated log lines ---
2014/11/23 23:58:42 C25320 c anonymous disconnected from 79.204.52.142
2014/11/23 23:58:42 C234F0 c anonymous disconnected from 84.173.38.35
2014/11/23 23:58:42 C216C0 c anonymous disconnected from 79.204.52.142
2014/11/23 23:58:42 0 --- Skipped 1 duplicated log lines ---
2014/11/23 23:58:42 C3C118 c anonymous disconnected from 217.91.171.164
2014/11/23 23:58:42 C2ADB0 c anonymous disconnected from 79.204.52.142
2014/11/23 23:58:42 C357F0 c anonymous disconnected from 84.173.38.35
2014/11/23 23:58:42 C1D418 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/11/23 23:58:43 C1D418 c [ADD PID 0] CAID: 1833 ECM_PID: 18B6 PROVID: 000000
2014/11/23 23:58:43 C1D418 c [ADD PID 1] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2014/11/23 23:58:43 C1D418 c [ADD PID 2] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2014/11/23 23:58:43 C1D418 c [ADD PID 3] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2014/11/23 23:58:43 C1D418 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/11/23 23:58:43 C1D418 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2014/11/23 23:58:43 C1D418 c New program number: 0083 (Sky Cinema HD Germany) [pmt_list_management 3]
2014/11/23 23:58:43 C1D418 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1833 PROVID 000000 ECMPID 18B6 ANY CHID PMTPID 0064 VPID 04FF
2014/11/23 23:58:44 C1D418 c serverbox (1702/0083/93): found (650 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/23 23:58:46 C2CBE0 c encrypted cccam-client 80.149.99.10 granted (Mutti, au=off)
2014/11/23 23:58:46 C44D90 c encrypted cccam-client 79.204.52.142 granted (Silke, au=off)
2014/11/23 23:58:46 C47E20 c encrypted cccam-client 84.173.38.35 granted (Max, au=off)
2014/11/23 23:58:47 C4AEB0 c encrypted cccam-client 79.204.52.142 granted (Ronny, au=off)
2014/11/23 23:58:50 C4DF40 c encrypted cccam-client 217.91.171.164 granted (Wohn, au=off)
2014/11/23 23:58:50 C1D418 c serverbox (1702/0083/93): found (592 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/23 23:58:57 C1D418 c serverbox (1702/0083/93): found (594 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/23 23:59:04 C1D418 c serverbox (1702/0083/93): found (593 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/23 23:59:09 C47E20 c Max (1702/006B/93): found (591 ms) by s02_sky - Sky Hits HD Germany

2014/11/24 00:03:09 C1D418 c [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2014/11/24 00:03:09 C1D418 c [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2014/11/24 00:03:09 C1D418 c [ADD PID 2] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2014/11/24 00:03:09 C1D418 c [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2014/11/24 00:03:09 C1D418 c [ADD PID 4] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2014/11/24 00:03:09 C1D418 c Found 5 ECMpids and 6 STREAMpids in PMT
2014/11/24 00:03:09 C1D418 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/24 00:03:09 C1D418 c New program number: EF10 (RTL HD) [pmt_list_management 3]
2014/11/24 00:03:09 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:09 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:09 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:10 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:10 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:10 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:10 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:11 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:11 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:11 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:12 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:12 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:12 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:13 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:13 C47E20 c Max (1702/006B/93): found (594 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:03:13 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:13 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:13 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:14 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:14 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:14 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:15 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:15 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:15 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:16 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:16 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:16 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:16 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:17 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:17 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:17 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:18 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:18 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:18 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:19 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:19 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:19 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:19 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:20 C47E20 c Max (1702/006B/93): found (592 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:03:20 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:20 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:20 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:21 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:21 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:21 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:22 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:22 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:22 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:22 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:23 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:23 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:23 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:24 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:24 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:24 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:25 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:25 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:25 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:25 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:26 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:26 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:26 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:27 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:27 C47E20 c Max (1702/006B/93): found (589 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:03:27 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:27 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:28 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:28 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:28 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:28 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:29 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:29 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:29 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:30 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:30 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:30 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:31 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:31 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:31 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:31 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:32 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:32 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:03:32 C1D418 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:03:33 C1D418 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Nov 24 00:04:38 2014
-------------------------------------------------------------------------------
2014/11/24 00:04:38 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10003 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/11/24 00:04:38 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1880
2014/11/24 00:04:38 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/11/24 00:04:38 0 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2014/11/24 00:04:38 0 s signal handling initialized
2014/11/24 00:04:38 0 s 221 service-id's loaded in 7 ms
2014/11/24 00:04:38 0 s 154 tier-id's loaded
2014/11/24 00:04:38 0 s 4 provid's loaded
2014/11/24 00:04:38 0 s cccam: initialized (fd=6, port=12000)
2014/11/24 00:04:38 0 s s02_sky [internal] creating thread for device /dev/sci0
2014/11/24 00:04:38 0 s hd02 [internal] creating thread for device /dev/sci1
2014/11/24 00:04:38 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/24 00:04:38 0 s waiting for local card init
2014/11/24 00:04:38 76F004F8 r s02_sky [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz
2014/11/24 00:04:38 76F02468 r hd02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/11/24 00:04:38 C321B8 h webif: decompressed 156707 bytes back into 373872 bytes
2014/11/24 00:04:38 C321B8 h HTTP Server running. ip=0.0.0.0 port=17000
2014/11/24 00:04:39 76F004F8 r s02_sky [internal] card detected
2014/11/24 00:04:39 76F02468 r hd02 [internal] card detected
2014/11/24 00:04:39 76F004F8 r s02_sky [internal] Card is present in readerslot!
2014/11/24 00:04:39 76F02468 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:04:39 76F004F8 r s02_sky [internal] Set reader parameters!
2014/11/24 00:04:39 76F004F8 r s02_sky [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:04:39 76F02468 r hd02 [internal] Set reader parameters!
2014/11/24 00:04:39 76F02468 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:04:39 76F004F8 r s02_sky [internal] Reset internal cardreader!
2014/11/24 00:04:39 76F02468 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:04:41 76F02468 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:04:41 76F02468 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:04:41 76F02468 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:04:41 76F02468 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/24 00:04:41 76F02468 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:04:41 76F02468 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:04:41 76F02468 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/24 00:04:42 76F004F8 r s02_sky [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/11/24 00:04:42 76F004F8 r s02_sky [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/11/24 00:04:42 76F004F8 r s02_sky [internal] TEST tempo mhz check = 600 mhz
2014/11/24 00:04:42 76F004F8 r s02_sky [internal] Calculated work ETU is 103.33 us reader mhz = 540
2014/11/24 00:04:42 76F004F8 r s02_sky [internal] Sent reader settings T=14 fs=5 ETU=600 WWT=9600 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=5 I=50 U=0
2014/11/24 00:04:42 76F02468 r hd02 [internal] detect native nagra card
2014/11/24 00:04:43 76F004F8 r s02_sky [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:04:44 76F004F8 r s02_sky [internal] detect irdeto tunneled nagra card
2014/11/24 00:04:44 76F004F8 r s02_sky [internal] no rsa key configured -> using irdeto mode
2014/11/24 00:04:44 76F004F8 r s02_sky [internal] detect irdeto card
2014/11/24 00:04:44 76F004F8 r s02_sky [internal] caid: 1702, acs: 3.84, country code: GER
2014/11/24 00:04:44 76F004F8 r s02_sky [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/11/24 00:04:45 76F02468 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/24 00:04:46 76F02468 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/24 00:04:46 76F02468 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:04:46 76F02468 r hd02 [internal] Set reader parameters!
2014/11/24 00:04:46 76F02468 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:04:46 76F02468 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:04:47 76F004F8 r s02_sky [internal] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
2014/11/24 00:04:47 76F004F8 r s02_sky [internal] active providers: 2 (000000,000000)
2014/11/24 00:04:47 76F004F8 r s02_sky [internal] found card system irdeto
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/24 00:04:47 76F02468 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:04:47 76F02468 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:04:47 76F02468 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:04:47 76F02468 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] entitlements for provider: 2, id: 000000
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 05F1, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 0276, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 0609, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 05E8, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 0605, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 00F0, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 04CE, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 7D23, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 0617, date: 2011/07/12 - 2012/03/22
2014/11/24 00:04:47 76F004F8 r s02_sky [irdeto] chid: 0606, date: 2011/06/27 - 2011/11/25
2014/11/24 00:04:48 76F02468 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 05DF, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 05DD, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 05F2, date: 2011/06/27 - 2011/11/25
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 000F, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 05FC, date: 2011/06/27 - 2011/11/25
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 7D27, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 05E7, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 05FB, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 05DE, date: 2012/06/11 - 2013/02/20
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 0103, date: 2008/01/19 - 2008/01/21
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 0104, date: 2008/01/19 - 2008/01/21
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 0105, date: 2008/01/19 - 2008/01/21
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2014/11/24 00:04:48 76F02468 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:04:48 76F02468 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/24 00:04:48 76F02468 r hd02 [internal] card system not supported
2014/11/24 00:04:48 76F02468 r hd02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/24 00:04:48 76F02468 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:04:48 76F02468 r hd02 [internal] Set reader parameters!
2014/11/24 00:04:48 76F02468 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:04:48 76F004F8 r s02_sky [irdeto] ready for requests
2014/11/24 00:04:48 76F02468 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:04:49 76F02468 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:04:49 76F02468 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:04:49 76F02468 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:04:49 76F02468 r hd02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/11/24 00:04:50 76F02468 r hd02 [internal] Sent reader settings T=0 fs=6 ETU=372 WWT=0 CWT=139 BWT=15371 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:04:50 76F02468 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:04:52 76F02468 r hd02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/24 00:04:53 76F02468 r hd02 [internal] detect native nagra card
2014/11/24 00:04:54 76F02468 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/24 00:04:55 76F02468 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/24 00:04:55 76F02468 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:04:56 76F02468 r hd02 [internal] Set reader parameters!
2014/11/24 00:04:56 76F02468 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:04:56 76F02468 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:04:57 76F02468 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:04:57 76F02468 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:04:57 76F02468 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:04:57 76F02468 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/24 00:04:57 76F02468 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:04:58 76F02468 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:04:58 76F02468 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/24 00:05:00 76F02468 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/24 00:05:01 76F02468 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/24 00:05:01 76F02468 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:05:01 76F02468 r hd02 [internal] Set reader parameters!
2014/11/24 00:05:01 76F02468 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:05:01 76F02468 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:05:02 76F02468 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:05:02 76F02468 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:05:02 76F02468 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:05:02 76F02468 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/24 00:05:03 76F02468 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:05:03 76F02468 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:05:03 76F02468 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/24 00:05:03 76F02468 r hd02 [internal] card system not supported
2014/11/24 00:05:03 76F02468 r hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/24 00:05:03 76F02468 r hd02 [internal] card initializing error
2014/11/24 00:05:04 0 s init for all local cards done
2014/11/24 00:05:04 0 s anti cascading disabled
2014/11/24 00:05:04 76F04C80 c plain dvbapi-client granted (serverbox, au=auto (3 reader))
2014/11/24 00:05:04 76F04C80 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/11/24 00:05:04 76F12940 c anonymous disconnected from 80.149.99.10
2014/11/24 00:05:04 76F0ECE0 c anonymous disconnected from 84.173.38.35
2014/11/24 00:05:04 76F0B080 c anonymous disconnected from 79.204.52.142
2014/11/24 00:05:04 76F10B10 c anonymous disconnected from 217.91.171.164
2014/11/24 00:05:04 76F09250 c anonymous disconnected from 80.149.99.10
2014/11/24 00:05:04 76F16630 c anonymous disconnected from 79.204.52.142
2014/11/24 00:05:04 76F07420 c anonymous disconnected from 217.91.171.164
2014/11/24 00:05:04 76F18510 c anonymous disconnected from 84.173.38.35
2014/11/24 00:05:04 76F0CEB0 c anonymous disconnected from 79.204.52.142
2014/11/24 00:05:06 0 --- Skipped 1 duplicated log lines ---
2014/11/24 00:05:06 76F1A3F0 c encrypted cccam-client 217.91.171.164 granted (Wohn, au=off)
2014/11/24 00:05:09 76F1C220 c encrypted cccam-client 80.149.99.10 granted (Mutti, au=off)
2014/11/24 00:05:09 76F1E050 c encrypted cccam-client 79.204.52.142 granted (Silke, au=off)
2014/11/24 00:05:09 76F1FE80 c encrypted cccam-client 79.204.52.142 granted (Ronny, au=off)
2014/11/24 00:05:10 76F21CB0 c encrypted cccam-client 84.173.38.35 granted (Max, au=off)
2014/11/24 00:05:14 76F21CB0 c Max (1702/006B/93): found (649 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:05:19 76F21CB0 c Max (1702/006B/93): found (595 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:05:26 76F21CB0 c Max (1702/006B/93): found (597 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:05:29 76F04C80 c [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2014/11/24 00:05:29 76F04C80 c [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2014/11/24 00:05:29 76F04C80 c [ADD PID 2] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2014/11/24 00:05:29 76F04C80 c [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2014/11/24 00:05:29 76F04C80 c [ADD PID 4] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2014/11/24 00:05:29 76F04C80 c Found 5 ECMpids and 6 STREAMpids in PMT
2014/11/24 00:05:29 76F04C80 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/24 00:05:29 76F04C80 c New program number: EF10 (RTL HD) [pmt_list_management 3]
2014/11/24 00:05:29 76F04C80 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:05:29 76F04C80 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:05:29 76F04C80 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:05:29 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:05:29 0 --- Skipped 6 duplicated log lines ---
2014/11/24 00:05:29 76F04C80 c [ADD PID 0] CAID: 1833 ECM_PID: 18B6 PROVID: 000000
2014/11/24 00:05:29 76F04C80 c [ADD PID 1] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2014/11/24 00:05:29 76F04C80 c [ADD PID 2] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2014/11/24 00:05:29 76F04C80 c [ADD PID 3] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2014/11/24 00:05:29 76F04C80 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/11/24 00:05:29 76F04C80 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2014/11/24 00:05:29 76F04C80 c New program number: 0083 (Sky Cinema HD Germany) [pmt_list_management 3]
2014/11/24 00:05:29 76F04C80 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1833 PROVID 000000 ECMPID 18B6 ANY CHID PMTPID 0064 VPID 04FF
2014/11/24 00:05:31 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:05:31 0 --- Skipped 5 duplicated log lines ---
2014/11/24 00:05:31 76F04C80 c serverbox (1702/0083/93): found (594 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:05:34 76F21CB0 c Max (1702/006B/93): found (589 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:05:37 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:05:37 76F04C80 c serverbox (1702/0083/93): found (590 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:05:41 76F21CB0 c Max (1702/006B/93): found (595 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:05:44 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:05:44 76F04C80 c serverbox (1702/0083/93): found (589 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:05:48 76F21CB0 c Max (1702/006B/93): found (593 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:05:50 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:05:51 0 --- Skipped 3 duplicated log lines ---
2014/11/24 00:05:51 76F04C80 c Found 0 ECMpids and 9 STREAMpids in PMT
2014/11/24 00:05:51 76F04C80 c [DVBAPI] Receiver wants to demux srvid 283E on adapter 0000 camask 0008 index 0003 pmtpid 13F6
2014/11/24 00:05:51 76F04C80 c New program number: 283E (FFFE:283E unknown) [pmt_list_management 3]
2014/11/24 00:05:54 76F04C80 c [ADD PID 0] CAID: 1833 ECM_PID: 18B6 PROVID: 000000
2014/11/24 00:05:54 76F04C80 c [ADD PID 1] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2014/11/24 00:05:54 76F04C80 c [ADD PID 2] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2014/11/24 00:05:54 76F04C80 c [ADD PID 3] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2014/11/24 00:05:54 76F04C80 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/11/24 00:05:54 76F04C80 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2014/11/24 00:05:54 76F04C80 c New program number: 0083 (Sky Cinema HD Germany) [pmt_list_management 3]
2014/11/24 00:05:54 76F04C80 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1833 PROVID 000000 ECMPID 18B6 ANY CHID PMTPID 0064 VPID 04FF
2014/11/24 00:05:54 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:05:54 0 --- Skipped 5 duplicated log lines ---
2014/11/24 00:05:54 76F04C80 c serverbox (1702/0083/93): found (595 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:05:55 76F21CB0 c Max (1702/006B/93): found (804 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:05:58 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:05:58 76F04C80 c serverbox (1702/0083/93): found (592 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:02 76F21CB0 c Max (1702/006B/93): found (593 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:06:05 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:06:05 76F04C80 c serverbox (1702/0083/93): found (595 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:09 76F21CB0 c Max (1702/006B/93): found (595 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:06:12 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:06:12 76F04C80 c serverbox (1702/0083/93): found (590 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:16 76F21CB0 c Max (1702/006B/93): found (591 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:06:19 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:06:19 76F04C80 c serverbox (1702/0083/93): found (594 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:23 76F21CB0 c Max (1702/006B/93): found (591 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:06:26 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:06:26 76F04C80 c serverbox (1702/0083/93): found (593 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:30 76F21CB0 c Max (1702/006B/93): found (593 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:06:33 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:06:33 76F04C80 c serverbox (1702/0083/93): found (592 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:37 76F21CB0 c Max (1702/006B/93): found (600 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:06:40 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:06:40 76F04C80 c serverbox (1702/0083/93): found (599 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:44 76F21CB0 c Max (1702/006B/93): found (595 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:06:47 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:06:47 76F04C80 c serverbox (1702/0083/93): found (594 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:51 76F21CB0 c Max (1702/006B/93): found (594 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:06:54 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:06:54 76F04C80 c serverbox (1702/0083/93): found (594 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany
2014/11/24 00:06:58 76F21CB0 c Max (1702/006B/93): found (594 ms) by s02_sky - Sky Hits HD Germany
2014/11/24 00:07:01 76F04C80 c ERROR: Can't open device /dev/dvb/adapter0/ca3 (errno=16 Device or resource busy)
2014/11/24 00:07:01 76F04C80 c serverbox (1702/0083/93): found (592 ms) by s02_sky(btun 1833) - Sky Cinema HD Germany


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Nov 24 00:08:48 2014
-------------------------------------------------------------------------------
2014/11/24 00:08:48 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10003 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/11/24 00:08:48 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2517
2014/11/24 00:08:48 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/11/24 00:08:48 0 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2014/11/24 00:08:48 0 s signal handling initialized
2014/11/24 00:08:48 0 s 221 service-id's loaded in 5 ms
2014/11/24 00:08:48 0 s 154 tier-id's loaded
2014/11/24 00:08:48 0 s 4 provid's loaded
2014/11/24 00:08:48 0 s cccam: initialized (fd=6, port=12000)
2014/11/24 00:08:48 0 s s02_sky [internal] creating thread for device /dev/sci0
2014/11/24 00:08:48 0 s hd02 [internal] creating thread for device /dev/sci1
2014/11/24 00:08:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/24 00:08:48 0 s waiting for local card init
2014/11/24 00:08:48 77600588 r s02_sky [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz
2014/11/24 00:08:48 776024F8 r hd02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/11/24 00:08:48 9441B8 h webif: decompressed 156707 bytes back into 373872 bytes
2014/11/24 00:08:48 9441B8 h HTTP Server running. ip=0.0.0.0 port=17000
2014/11/24 00:08:49 77600588 r s02_sky [internal] card detected
2014/11/24 00:08:49 776024F8 r hd02 [internal] card detected
2014/11/24 00:08:49 776024F8 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:08:49 77600588 r s02_sky [internal] Card is present in readerslot!
2014/11/24 00:08:49 77600588 r s02_sky [internal] Set reader parameters!
2014/11/24 00:08:49 77600588 r s02_sky [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:08:49 776024F8 r hd02 [internal] Set reader parameters!
2014/11/24 00:08:49 776024F8 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:08:49 776024F8 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:08:49 77600588 r s02_sky [internal] Reset internal cardreader!
2014/11/24 00:08:50 776024F8 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:08:50 776024F8 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:08:50 776024F8 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:08:50 776024F8 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/24 00:08:51 776024F8 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:08:51 776024F8 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:08:51 776024F8 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/24 00:08:51 77600588 r s02_sky [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/11/24 00:08:51 77600588 r s02_sky [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/11/24 00:08:51 77600588 r s02_sky [internal] TEST tempo mhz check = 600 mhz
2014/11/24 00:08:51 77600588 r s02_sky [internal] Calculated work ETU is 103.33 us reader mhz = 540
2014/11/24 00:08:52 77600588 r s02_sky [internal] Sent reader settings T=14 fs=5 ETU=600 WWT=9600 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=5 I=50 U=0
2014/11/24 00:08:52 776024F8 r hd02 [internal] detect native nagra card
2014/11/24 00:08:52 77600588 r s02_sky [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:08:53 77600588 r s02_sky [internal] detect irdeto tunneled nagra card
2014/11/24 00:08:53 77600588 r s02_sky [internal] no rsa key configured -> using irdeto mode
2014/11/24 00:08:53 77600588 r s02_sky [internal] detect irdeto card
2014/11/24 00:08:53 77600588 r s02_sky [internal] caid: 1702, acs: 3.84, country code: GER
2014/11/24 00:08:53 77600588 r s02_sky [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/11/24 00:08:54 776024F8 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/24 00:08:55 776024F8 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/24 00:08:55 776024F8 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:08:55 776024F8 r hd02 [internal] Set reader parameters!
2014/11/24 00:08:55 776024F8 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:08:55 776024F8 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:08:56 77600588 r s02_sky [internal] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
2014/11/24 00:08:56 77600588 r s02_sky [internal] active providers: 2 (000000,000000)
2014/11/24 00:08:56 77600588 r s02_sky [internal] found card system irdeto
2014/11/24 00:08:56 77600588 r s02_sky [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/24 00:08:57 776024F8 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:08:57 776024F8 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:08:57 776024F8 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:08:57 776024F8 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] entitlements for provider: 2, id: 000000
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05F1, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0276, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0609, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05E8, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0605, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 00F0, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 04CE, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 7D23, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0617, date: 2011/07/12 - 2012/03/22
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0606, date: 2011/06/27 - 2011/11/25
2014/11/24 00:08:57 776024F8 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05DF, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05DD, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05F2, date: 2011/06/27 - 2011/11/25
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 000F, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05FC, date: 2011/06/27 - 2011/11/25
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 7D27, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05E7, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05FB, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 05DE, date: 2012/06/11 - 2013/02/20
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0103, date: 2008/01/19 - 2008/01/21
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0104, date: 2008/01/19 - 2008/01/21
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0105, date: 2008/01/19 - 2008/01/21
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2014/11/24 00:08:57 776024F8 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:08:57 776024F8 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/24 00:08:57 776024F8 r hd02 [internal] card system not supported
2014/11/24 00:08:57 776024F8 r hd02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/24 00:08:57 776024F8 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:08:57 776024F8 r hd02 [internal] Set reader parameters!
2014/11/24 00:08:57 776024F8 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:08:57 77600588 r s02_sky [irdeto] ready for requests
2014/11/24 00:08:58 776024F8 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:08:59 776024F8 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:08:59 776024F8 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:08:59 776024F8 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:08:59 776024F8 r hd02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/11/24 00:08:59 776024F8 r hd02 [internal] Sent reader settings T=0 fs=6 ETU=372 WWT=0 CWT=139 BWT=15371 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:09:00 776024F8 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:09:01 776024F8 r hd02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/24 00:09:02 776024F8 r hd02 [internal] detect native nagra card
2014/11/24 00:09:03 776024F8 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/24 00:09:05 776024F8 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/24 00:09:05 776024F8 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:09:05 776024F8 r hd02 [internal] Set reader parameters!
2014/11/24 00:09:05 776024F8 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:09:05 776024F8 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:09:07 776024F8 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:09:07 776024F8 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:09:07 776024F8 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:09:07 776024F8 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/24 00:09:07 776024F8 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:09:07 776024F8 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:09:07 776024F8 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/24 00:09:09 776024F8 r hd02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/24 00:09:10 776024F8 r hd02 [internal] T1 Resync command error, trying to reactivate!
2014/11/24 00:09:10 776024F8 r hd02 [internal] Card is present in readerslot!
2014/11/24 00:09:10 776024F8 r hd02 [internal] Set reader parameters!
2014/11/24 00:09:10 776024F8 r hd02 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2014/11/24 00:09:11 776024F8 r hd02 [internal] Reset internal cardreader!
2014/11/24 00:09:12 776024F8 r hd02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/24 00:09:12 776024F8 r hd02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/24 00:09:12 776024F8 r hd02 [internal] TEST tempo mhz check = 500 mhz
2014/11/24 00:09:12 776024F8 r hd02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/11/24 00:09:12 776024F8 r hd02 [internal] Sent reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/11/24 00:09:13 776024F8 r hd02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/24 00:09:13 776024F8 r hd02 [internal] Card responded ok for ifsd request of 160
2014/11/24 00:09:13 776024F8 r hd02 [internal] card system not supported
2014/11/24 00:09:13 776024F8 r hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/24 00:09:13 776024F8 r hd02 [internal] card initializing error
2014/11/24 00:09:13 0 s init for all local cards done
2014/11/24 00:09:13 0 s anti cascading disabled
2014/11/24 00:09:13 77605748 c plain dvbapi-client granted (serverbox, au=auto (3 reader))
2014/11/24 00:09:13 77605748 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/11/24 00:09:13 776146D8 c anonymous disconnected from 79.204.52.142
2014/11/24 00:09:13 7760CE18 c anonymous disconnected from 84.173.38.35
2014/11/24 00:09:13 77610A78 c anonymous disconnected from 80.149.99.10
2014/11/24 00:09:13 77616508 c anonymous disconnected from 84.173.38.35
2014/11/24 00:09:13 7761A168 c anonymous disconnected from 80.149.99.10
2014/11/24 00:09:13 776091B8 c anonymous disconnected from 79.204.52.142
2014/11/24 00:09:13 7760EC48 c anonymous disconnected from 217.91.171.164
2014/11/24 00:09:13 776128A8 c anonymous disconnected from 79.204.52.142
2014/11/24 00:09:13 0 --- Skipped 1 duplicated log lines ---
2014/11/24 00:09:13 77618338 c anonymous disconnected from 217.91.171.164
2014/11/24 00:09:15 77605748 c [ADD PID 0] CAID: 1830 ECM_PID: 1CEA PROVID: 000000
2014/11/24 00:09:15 77605748 c [ADD PID 1] CAID: 1843 ECM_PID: 19EA PROVID: 000000
2014/11/24 00:09:15 77605748 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BEA PROVID: 000000
2014/11/24 00:09:15 77605748 c [ADD PID 3] CAID: 098C ECM_PID: 1AEA PROVID: 000000
2014/11/24 00:09:15 77605748 c [ADD PID 4] CAID: 1860 ECM_PID: 1EEA PROVID: 000000
2014/11/24 00:09:15 77605748 c Found 5 ECMpids and 5 STREAMpids in PMT
2014/11/24 00:09:15 77605748 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/24 00:09:15 77605748 c New program number: EF74 (SAT.1 HD) [pmt_list_management 3]
2014/11/24 00:09:15 77605748 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:09:15 77605748 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:09:16 77605748 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/24 00:09:16 7761BF98 c encrypted cccam-client 79.204.52.142 granted (Silke, au=off)
2014/11/24 00:09:16 7761DDC8 c encrypted cccam-client 79.204.52.142 granted (Ronny, au=off)
2014/11/24 00:09:16 77605748 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/24 00:09:16 77605748 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

- - - - - - - - - -

hier sind die aktuellen Configs

Spoiler

global]logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l


[cccam]
port = 12000
reshare = 1
ignorereshare = 0
version = 2.3.0
keepconnected = 1
#stealth = 1
#stealth ist alternativ


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = serverbox


[webif]
httpport = 17000
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

server

Spoiler

[reader]label = s02_sky
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,1,2


[reader]
label = hd02
description = HD01 or HD02 (NAGRA)
caid = 1830,1843
detect = cd
boxkey = A7XXXXXXXXXXXXXXXXXC
rsakey = BF35XXXXXXXXXXXXXXXXXXXX4DD5
mhz = 450
cardmhz = 2700
emmcache = 1,2,2
protocol = internal
device = /dev/sci1
group = 2


[reader]
label = cline_1
description = erhaltene_c-line_vom_server1
enable = 0
protocol = cccam
device = serverdyndns_serverip
user = c_line_user
password = c_line_pass
group = 2
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1

user

Spoiler

[account]user = serverbox
pwd = pass
group = 1,2
betatunnel = 1833.FFFF:1702
au = 1

 

[4gx35]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

mhz leer oder 1 per webif setzen, caid ist nicht 1830!!! nur 1843 oscam neu starten,
alternativ karten wechseln, dazu device beim reader ändern,
was ist das denn überhaupt für ein receiver ?

 

[nando0707]

ok stelle ich nachher um.

ich habe eine DM 800se und eine DM 7020HD.
Die HD02 Karte läuft mit Scam und CCam ohne Probleme.

Hi, ich habe alles Probiert und bekomme die HD02 nicht zum laufen.
Habe jetzt die V13 mit HD+ dazu gemacht um zu testen. Da laufen alle HD Programme.
Was kann ich noch tun um die Karte zu laufen zu bekommen?

 

[bubbl]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Wie schauen denn die aktuellen Configs aus ?

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

hier sind die aktuellen Configs mit der V13

Config

Spoiler

[global]logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l




#interner CCcam Server für CCcam Clients, CCcam Version nur bei Problemen ändern
#Portangabe evtl. auf eigenen weitergeleiteten Port ändern, reshare evtl. später
#Wichtig: keinen Standardport wie 12000 verwenden!
#
[cccam]
port = 12000
reshare = 1
ignorereshare = 0
version = 2.3.0
keepconnected = 1
#stealth = 1
#stealth ist alternativ






#internes Protokoll, um das Bild auf dem TV durch die Serverbox=Receiver mit Oscam hell werden zu lassen,
#benötigt einen user account dvbapi in oscam.user
#beides bei freetz, Debian usw. nicht erforderlich, gesamten [dvbapi] Abschnitt hier entfernen
#allerdings nur auf Server mit freetz/IPC usw.entfernen, Oscam Clients, also Receiver mit Oscam, brauchen [dvbapi]
#
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = serverbox
#andere Receiver boxtype evtl. ändern, im Webinterface!!! von Oscam unter Configuration-DVBApi auswählen!!!






#Oscam Webinterface, Browser-Adresse IPdesServers:17000
#
[webif]
httpport = 17000
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

Server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10003# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = s02_sky
protocol = internal
device = /dev/sci1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,1,2


[reader]
label = hd02
description = HD+scharz
enable = 0
protocol = internal
device = /dev/sci0
services = hd01
caid = 1843
boxkey = A7...7C
rsakey = BF...D5
detect = cd
mhz = 1
cardmhz = 2700
group = 2


[reader]
label = skyv13
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
nagra_read = 2
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,2,0
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
ndsversion = 2
saveemm-u = 1
auprovid = 09C4

User

Spoiler

# lokaler account, # sonst wird es auf dem Receiver nicht hell oder im Webinterface steht anonymous
# dieser account ist bei Receivern als Server notwendig !!!, bei freetz, debian usw. entfernen
# als account für internes dvbapi Protokoll, username kommt aus [dvbapi] in oscam.conf


[account]
user = serverbox
pwd = pass
group = 1,2
betatunnel = 1833.FFFF:1702
au = v13,s02_sky


#für au = label des readers (auch mehrere) eintragen:
#au = s02_sky
#au = hd01
#au = s02_sky,hd01


#betatunnel für s02 wird evtl. bei neueren oscam versionen nicht benötigt
#trotzdem erst mal mit betatunnel testen




# user accounts,

 

[HagenB]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Hi, ich habe alles Probiert und bekomme die HD02 nicht zum laufen.

Wenn die hd02 laufen soll, musst du im reader enable = 1 einstellen. Steht auf 0 = aus