brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

hier mal die Logs aus dem Webif

Spoiler

2014/11/15 00:05:34 5B3138 r hdplus02 [internal] detect native nagra card ​

2014/11/15 00:05:35 5B3138 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/15 00:05:36 5B3138 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/15 00:05:38 5B3138 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/15 00:05:38 5B3138 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/15 00:05:38 5B3138 r hdplus02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/11/15 00:05:38 5B3138 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/11/15 00:05:40 5B3138 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/15 00:05:41 5B3138 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/15 00:05:43 5B3138 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/15 00:05:45 5B3138 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/15 00:05:45 5B3138 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/15 00:05:45 5B3138 r hdplus02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/11/15 00:05:45 5B3138 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/11/15 00:05:47 5B3138 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/15 00:05:47 5B3138 r hdplus02 [internal] card system not supported
2014/11/15 00:05:47 5B3138 r hdplus02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/15 00:05:47 5B3138 r hdplus02 [internal] card initializing error
2014/11/15 00:05:47 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2014/11/15 00:05:47 0 s init for all local cards done
2014/11/15 00:05:47 0 s anti cascading disabled
2014/11/15 00:05:47 5B99F8 c plain dvbapi-client granted (anonymous, au=off)
2014/11/15 00:05:47 5B99F8 c [DVBAPI] Error in oscam.dvbapi: ret=-1 | p: 0000 000000 0000 10000
2014/11/15 00:05:47 0 --- Skipped 1 duplicated log lines ---
2014/11/15 00:05:47 5B99F8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/11/15 00:05:48 5B99F8 c [DVBAPI] Receiver sends PMT command 3 for channel EF10
2014/11/15 00:05:48 5B99F8 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/15 00:05:48 5B99F8 c [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2014/11/15 00:05:48 5B99F8 c [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2014/11/15 00:05:48 5B99F8 c [ADD PID 2] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2014/11/15 00:05:48 5B99F8 c [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2014/11/15 00:05:48 5B99F8 c [ADD PID 4] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2014/11/15 00:05:48 5B99F8 c Found 5 ECMpids and 7 STREAMpids in PMT
2014/11/15 00:05:48 5B99F8 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/15 00:05:48 5B99F8 c New program number: EF10 (RTL HD) [pmt_list_management 3]
2014/11/15 00:05:48 5B99F8 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2014/11/15 00:05:49 5B99F8 c anonymous (09C4&000000/0641/EF10/B3:EB399F7C20F9519EAFC92C394FC5AE87): found (449 ms) by skyv13 - RTL HD​

Spoiler

2014/11/15 00:05:18 5B3138 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us ​

2014/11/15 00:05:19 5B3138 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 005a, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 0065, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 0066, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 0067, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 0068, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 0069, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 006a, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 006b, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 006f, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 007b, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 007d, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 0081, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 008e, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 00c0, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 00c7, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 00c8, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 00c9, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:20 58AAD0 r skyv13 [videoguard2] tier: 00ca, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:21 58AAD0 r skyv13 [videoguard2] tier: 00cb, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:21 58AAD0 r skyv13 [videoguard2] tier: 00d4, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:21 58AAD0 r skyv13 [videoguard2] tier: 00f3, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:21 58AAD0 r skyv13 [videoguard2] tier: 00fa, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:21 5B3138 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/15 00:05:21 5B3138 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/15 00:05:21 5B3138 r hdplus02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/11/15 00:05:21 58AAD0 r skyv13 [videoguard2] tier: 00ff, expiry date: 2014/12/20-00:01:00
2014/11/15 00:05:21 5B3138 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/11/15 00:05:23 5B3138 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/15 00:05:24 5B3138 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/15 00:05:26 5B3138 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/15 00:05:28 5B3138 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/15 00:05:28 5B3138 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/15 00:05:28 5B3138 r hdplus02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/11/15 00:05:28 5B3138 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)​

​

Spoiler

2014/11/15 00:02:53 5A1AD0 CA 7C DB 1E B6 03 3C 2D 15 BD 88 AC 09 AF F6 10 ​

2014/11/15 00:02:53 5A1AD0 78 AD ED 34 AA B2 52 50 77 2B 28 E4 E6 02 A9 E7
2014/11/15 00:02:53 5A1AD0 45 97 76 4A CB 1E 97 2F 90 00
2014/11/15 00:02:53 5A1AD0 r skyv13 [videoguard2] INS54:
2014/11/15 00:02:53 5A1AD0 D3 54 00 00 48
2014/11/15 00:02:53 5A1AD0 r skyv13 [videoguard2] Decrypted payload
2014/11/15 00:02:53 5A1AD0 5B C5 84 A4 AD DE 4E D9 00 00 00 D4 00 01 22 02
2014/11/15 00:02:53 5A1AD0 00 80 0E 02 01 00 0F 04 00 00 00 00 20 04 00 00
2014/11/15 00:02:53 5A1AD0 00 00 25 11 00 00 00 00 00 00 00 00 00 00 00 00
2014/11/15 00:02:53 5A1AD0 00 00 00 00 00 2A 04 00 D4 00 00 55 01 80 56 08
2014/11/15 00:02:53 5A1AD0 00 00 00 00 00 00 00 00
2014/11/15 00:02:53 5A1AD0 r skyv13 [videoguard2] cardreader_do_ecm: after csystem.do_ecm rc=1
2014/11/15 00:02:53 5A1AD0 r skyv13 [videoguard2] cardreader_do_ecm: ret rc=1
2014/11/15 00:02:53 5A1AD0 r skyv13 [videoguard2] cardreader_process_ecm: cardreader_do_ecm returned rc=1 (ERROR=0)
2014/11/15 00:02:53 5A1AD0 r start client thread action 32
2014/11/15 00:02:53 5A1AD0 r skyv13 [videoguard2] TRACE: ecm answer for ecm hash 364A1809A2799052F621D1B7E9206139 rc=0
2014/11/15 00:02:53 5A1AD0 r skyv13 [videoguard2] ecm hash: 364A1809A2799052F621D1B7E9206139 real time: 431 ms
2014/11/15 00:02:53 5CFFE8 c data from add_job action=32 client c anonymous
2014/11/15 00:02:53 5CFFE8 c anonymous (09C4&000000/0641/EF10/B3:364A1809A2799052F621D1B7E9206139): found (438 ms) by skyv13 - RTL HD
2014/11/15 00:02:53 5CFFE8 c cw:
2014/11/15 00:02:53 5CFFE8 00 00 00 00 00 00 00 00 5B C5 84 A4 AD DE 4E D9
2014/11/15 00:02:53 5A1AD0 r skyv13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/11/15 00:02:53 5A37D0 r hdplus02 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2014/11/15 00:02:54 5A1AD0 r skyv13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/11/15 00:02:54 5A37D0 r hdplus02 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2014/11/15 00:02:55 5A1AD0 r skyv13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/11/15 00:02:55 5A37D0 r hdplus02 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2014/11/15 00:02:55 0 share-updater mode=interval t=240s
2014/11/15 00:02:56 5A1AD0 r skyv13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/11/15 00:02:56 5A37D0 r hdplus02 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2014/11/15 00:02:57 5A1AD0 r skyv13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/11/15 00:02:57 5A37D0 r hdplus02 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2014/11/15 00:02:57 0 start client thread action 31
2014/11/15 00:02:57 5CFFE8 c data from add_job action=31 client c anonymous
2014/11/15 00:02:58 5A1AD0 r skyv13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/11/15 00:02:58 5A37D0 r hdplus02 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2014/11/15 00:02:59 5A1AD0 r skyv13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/11/15 00:02:59 5A37D0 r hdplus02 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2014/11/15 00:02:59 5C88D0 h WebIf: Received no auth header from 192.168.178.22.
2014/11/15 00:02:59 5C88D0 h WebIf: Origin checked. Result: access from 192.168.178.22 => allowed​

​

 

[dia]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

setze mal anstatt mhz 368 jetzt 450 ein
und cardmhz 2700

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Es hat sich leider nichts geändert!!

 

[Pilot]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Vielleichtliegt es an deinem Image auf deinem Receiver....
Teste folgedes: lade dir scam. Stell auf RTL HD. Nicht zappen.

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

ich habe Merlin 3 drauf mit GP3 Wiki.
ist da was nicht in Ordnung??

 

[dia]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

ziehe mal die v13 raus
und stecke da mal deine hd+ karte rein
mit der config

Spoiler

#oscam.conf
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
logfile = /var/log/oscam.log
maxlogsize = 10
Level = 15
saveinithistory = 1
emmlogdir = /var/log/


[newcamd]
key = 0102030405060708091011121314
port = 12000@1843:003411




[cccam]
port = 13000
reshare = 2
version = 2.1.3




[dvbapi]
enabled = 1
au = 1
boxtype = serverbox
user = local
pmt_mode = 4




[monitor]
httpport = 888
httpuser = hund
httppwd = katze
monlevel = 4
Httprefresh = 10
[webif]
HttpPort = 17000
HttpUser = oscam
HttpPWD = oscam
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.0.255
Httpdyndns =
HttpReadOnly = 1




#oscam.server
[reader]
label = HD+
protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,3,2
rsakey = BF35**********D5
boxkey = A7**********7C
mhz = 368
cardmhz = 368




#oscam.user
[account]
User = hdplus
Pwd = pass
Group = 1
IDENT = 1843:003411
CAID = 1843
AU = HD+

 

[Pilot]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

les den Nachtrag in meinem Beitrag.

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Danke, ich werde das heute Abend mal testen.

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Hi habe ich gemacht leider geht da nichts!!

- - - - - - - - - -

welchen Beitrag meinst du?

- - - - - - - - - -

hi das habe ich gemacht Karte geht einwandfrei!!
im Oscar leider nicht, brauche Oscam für CS

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Spoiler

2014/11/16 16:38:31 82B460 r HD+ [internal] card system not supported
2014/11/16 16:38:31 82B460 r HD+ [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/16 16:38:31 82B460 r HD+ [internal] card initializing error
2014/11/16 16:38:31 0 s init for all local cards done
2014/11/16 16:38:31 0 s anti cascading disabled
2014/11/16 16:38:31 845088 c plain dvbapi-client granted (anonymous, au=off)
2014/11/16 16:38:31 845088 c [DVBAPI] Error in oscam.dvbapi: ret=-1 | p: 0000 000000 0000 10000
2014/11/16 16:38:31 0 --- Skipped 1 duplicated log lines ---
2014/11/16 16:38:31 845088 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2014/11/16 16:38:33 845088 c [DVBAPI] Receiver sends PMT command 3 for channel EF74
2014/11/16 16:38:33 845088 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/16 16:38:33 845088 c [ADD PID 0] CAID: 1830 ECM_PID: 1CEA PROVID: 000000
2014/11/16 16:38:33 845088 c [ADD PID 1] CAID: 1843 ECM_PID: 19EA PROVID: 000000
2014/11/16 16:38:33 845088 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BEA PROVID: 000000
2014/11/16 16:38:33 845088 c [ADD PID 3] CAID: 098C ECM_PID: 1AEA PROVID: 000000
2014/11/16 16:38:33 845088 c [ADD PID 4] CAID: 1860 ECM_PID: 1EEA PROVID: 000000
2014/11/16 16:38:33 845088 c Found 5 ECMpids and 6 STREAMpids in PMT
2014/11/16 16:38:33 845088 c [DVBAPI] Receiver wants to demux srvid EF74 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2014/11/16 16:38:33 845088 c New program number: EF74 (SAT.1 HD) [pmt_list_management 3]
2014/11/16 16:38:33 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:33 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:33 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:33 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:34 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:34 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:34 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:35 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:35 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:35 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:36 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:36 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:36 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:37 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:37 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:37 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:37 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2014/11/16 16:38:37 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:38 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:38 845088 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/11/16 16:38:38 845088 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/11/16 16:38:38 76D00468 h all debug_level=1​

das ist der Log mit der Einstellung von oben.

 

[pehedima]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

1. Poste bitte deine Logfiles immer linksbündig, ansonsten sind die schwer zu lesen. debug_level = 0 ist völlig ausreichend.
2. Ein richtiges Logfile beginnt immer mit dem oscam start. Gerade dann, wenn es um Initialisierungsfehler von Karten geht.

Irgendwas ist doch in deinen Configs völlig quer:

[COLOR=#000000][FONT=Lucida Console]2014/11/15 00:05:47 5B99F8 c plain dvbapi-client granted ([/FONT][/COLOR][COLOR=#ff0000][FONT=Lucida Console]anonymous[/FONT][/COLOR][COLOR=#000000][FONT=Lucida Console], au=off) [/FONT][/COLOR]

[COLOR=#000000][FONT=Lucida Console]2014/11/16 16:38:31 845088 c [DVBAPI] [/FONT][/COLOR][COLOR=#ff0000][FONT=Lucida Console]Error in oscam.dvbapi[/FONT][/COLOR][COLOR=#000000][FONT=Lucida Console]: ret=-1 | p: 0000 000000 0000 10000 [/FONT][/COLOR]

Daher poste bitte zunächst mal deine aktuellen und vollständigen Configs.

Bei der HD+ Karte den Reader mal wie folgt versuchen:

autospeed = 0
mhz = 368
cardmhz = 2700

oder auch mal wie folgt probieren:

autospeed = 0
mhz = 368
cardmhz = 368

Bitte zu den jeweiligen Testfällen ein Logfile posten (siehe dazu oben 1. und 2.).

 

[nando0707]

hier der Log zum ersten Test

Spoiler

2014/11/17 23:58:07 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)2014/11/17 23:58:07 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 824
2014/11/17 23:58:07 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/11/17 23:58:07 0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2014/11/17 23:58:07 0 s signal handling initialized
2014/11/17 23:58:07 0 s 831 service-id's loaded in 25ms
2014/11/17 23:58:07 0 s 4 provid's loaded
2014/11/17 23:58:07 0 s cs357x: initialized (fd=6, port=40000)
2014/11/17 23:58:07 0 s cccam: initialized (fd=7, port=12000)
2014/11/17 23:58:07 0 s skyv13 [internal] creating thread for device /dev/sci0
2014/11/17 23:58:07 0 s hdplus02 [internal] creating thread for device /dev/sci1
2014/11/17 23:58:07 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/17 23:58:07 0 s waiting for local card init
2014/11/17 23:58:07 D127D0 r hdplus02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.68 MHz
2014/11/17 23:58:07 D10AD0 r skyv13 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/11/17 23:58:07 D36460 h webif: decompressed 69662 bytes back into 195704 bytes
2014/11/17 23:58:07 D36460 h HTTP Server running. ip=0.0.0.0 port=17000
2014/11/17 23:58:08 D127D0 r hdplus02 [internal] card detected
2014/11/17 23:58:08 D10AD0 r skyv13 [internal] card detected
2014/11/17 23:58:09 D10AD0 r skyv13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/11/17 23:58:09 D10AD0 r skyv13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/11/17 23:58:09 D10AD0 r skyv13 [internal] TEST tempo mhz check = 500 mhz
2014/11/17 23:58:09 D10AD0 r skyv13 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/11/17 23:58:09 D10AD0 r skyv13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/17 23:58:09 D127D0 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/17 23:58:09 D127D0 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/17 23:58:09 D127D0 r hdplus02 [internal] TEST tempo mhz check = 368 mhz
2014/11/17 23:58:09 D127D0 r hdplus02 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2014/11/17 23:58:10 D127D0 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/17 23:58:10 D127D0 r hdplus02 [internal] Card responded ok for ifsd request of 160
2014/11/17 23:58:11 D127D0 r hdplus02 [internal] detect native nagra card
2014/11/17 23:58:11 D10AD0 r skyv13 [internal] Card type: P1GV
2014/11/17 23:58:11 D10AD0 r skyv13 [internal] Rom version: 10A7
2014/11/17 23:58:11 D10AD0 r skyv13 [internal] parental lock setting: FF FF FF FF
2014/11/17 23:58:11 D10AD0 r skyv13 [internal] type: VideoGuard Sky Austria/Germany (09C4), caid: 09C4
2014/11/17 23:58:11 D10AD0 r skyv13 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/11/17 23:58:11 D10AD0 r skyv13 [internal] ready for requests
2014/11/17 23:58:11 D10AD0 r skyv13 [internal] found card system videoguard2
2014/11/17 23:58:11 D10AD0 r skyv13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/11/17 23:58:11 D10AD0 r skyv13 [videoguard2] card detected
2014/11/17 23:58:11 D10AD0 r skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/11/17 23:58:12 D10AD0 r skyv13 [videoguard2] tier: b4db, expiry date: 2014/07/23-01:01:04

hier zum zweiten Test

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Tue Nov 18 00:04:34 2014
-------------------------------------------------------------------------------
2014/11/18 00:04:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2014/11/18 00:04:34 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 823
2014/11/18 00:04:34 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2014/11/18 00:04:34 0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2014/11/18 00:04:34 0 s signal handling initialized
2014/11/18 00:04:34 0 s 831 service-id's loaded in 28ms
2014/11/18 00:04:35 0 s 4 provid's loaded
2014/11/18 00:04:35 0 s cs357x: initialized (fd=6, port=40000)
2014/11/18 00:04:35 0 s cccam: initialized (fd=7, port=12000)
2014/11/18 00:04:35 0 s skyv13 [internal] creating thread for device /dev/sci0
2014/11/18 00:04:35 0 s hdplus02 [internal] creating thread for device /dev/sci1
2014/11/18 00:04:35 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/18 00:04:35 0 s waiting for local card init
2014/11/18 00:04:35 C637D0 r hdplus02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2014/11/18 00:04:35 C61AD0 r skyv13 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/11/18 00:04:35 C87460 h webif: decompressed 69662 bytes back into 195704 bytes
2014/11/18 00:04:35 C87460 h HTTP Server running. ip=0.0.0.0 port=17000
2014/11/18 00:04:36 C637D0 r hdplus02 [internal] card detected
2014/11/18 00:04:36 C61AD0 r skyv13 [internal] card detected
2014/11/18 00:04:37 C61AD0 r skyv13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/11/18 00:04:37 C61AD0 r skyv13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/11/18 00:04:37 C61AD0 r skyv13 [internal] TEST tempo mhz check = 500 mhz
2014/11/18 00:04:37 C61AD0 r skyv13 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/11/18 00:04:37 C61AD0 r skyv13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/18 00:04:37 C637D0 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 00:04:37 C637D0 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 00:04:37 C637D0 r hdplus02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/11/18 00:04:37 C637D0 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/11/18 00:04:38 C61AD0 r skyv13 [internal] Card type: P1GV
2014/11/18 00:04:38 C61AD0 r skyv13 [internal] Rom version: 10A7
2014/11/18 00:04:39 C637D0 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/18 00:04:39 C61AD0 r skyv13 [internal] parental lock setting: FF FF FF FF
2014/11/18 00:04:39 C61AD0 r skyv13 [internal] type: VideoGuard Sky Austria/Germany (09C4), caid: 09C4
2014/11/18 00:04:39 C61AD0 r skyv13 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/11/18 00:04:39 C61AD0 r skyv13 [internal] ready for requests
2014/11/18 00:04:39 C61AD0 r skyv13 [internal] found card system videoguard2
2014/11/18 00:04:39 C61AD0 r skyv13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/11/18 00:04:39 C61AD0 r skyv13 [videoguard2] card detected
2014/11/18 00:04:39 C61AD0 r skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/11/18 00:04:39 C61AD0 r skyv13 [videoguard2] tier: b4db, expiry date: 2014/07/23-01:01:04
2014/11/18 00:04:40 C637D0 r hdplus02 [internal] detect native nagra card
2014/11/18 00:04:42 C637D0 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 00:04:44 C637D0 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 005a, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 0065, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 0066, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 0067, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 0068, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 0069, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 006a, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 006b, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 006f, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 007b, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 007d, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 0081, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 008e, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 00c0, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 00c7, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 00c8, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 00c9, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 00ca, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 00cb, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 00d4, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:44 C61AD0 r skyv13 [videoguard2] tier: 00f3, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:45 C61AD0 r skyv13 [videoguard2] tier: 00fa, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:45 C61AD0 r skyv13 [videoguard2] tier: 00ff, expiry date: 2014/12/20-00:01:00
2014/11/18 00:04:45 C637D0 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 00:04:45 C637D0 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 00:04:45 C637D0 r hdplus02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/11/18 00:04:45 C637D0 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/11/18 00:04:47 C637D0 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/18 00:04:48 C637D0 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 00:04:50 C637D0 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/18 00:04:52 C637D0 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 00:04:52 C637D0 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 00:04:52 C637D0 r hdplus02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/11/18 00:04:52 C637D0 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/11/18 00:04:53 C637D0 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/18 00:04:53 C637D0 r hdplus02 [internal] card system not supported
2014/11/18 00:04:53 C637D0 r hdplus02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/18 00:04:55 C637D0 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 00:04:55 C637D0 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 00:04:55 C637D0 r hdplus02 [internal] Calculated work ETU is 101.09 us reader mhz = 368
2014/11/18 00:04:55 C637D0 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/11/18 00:04:57 C637D0 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/18 00:04:58 C637D0 r hdplus02 [internal] detect native nagra card
2014/11/18 00:05:00 C637D0 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 00:05:02 C637D0 r hdplus02 [internal] T1 Resync command error, trying to reactivate!
2014/11/18 00:05:04 C637D0 r hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/11/18 00:05:04 C637D0 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 00:05:04 C637D0 r hdplus02 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/11/18 00:05:04 C637D0 r hdplus02 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/11/18 00:05:05 C637D0 r hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/11/18 00:05:07 C637D0 r hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/18 00:05:09 C637D0 r hdplus02 [internal] T1 Resync command error, trying to reactivate!

beides leider ohne Erfolg

 

[nando0707]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

hier nochmal die Aktuellen Configs

Server

Spoiler

[reader]label = skyv13
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
autospeed = 1
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,2,0
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
ndsversion = 2
saveemm-u = 1








[reader]
label = hdplus02
enable = 1
protocol = internal
device = /dev/sci1
caid = 1843
rsakey = BF...D5
boxkey = A7...7C
detect = cd
autospeed = 0
mhz = 368
cardmhz = 368
ecmwhitelist = 1843:89
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,3,2
auprovid = 003411

Config

Spoiler

[global]nice = -1
WaitForCards = 1
ClientTimeout = 5
logfile = /var/log/oscam.log
maxlogsize = 10
Level = 15
saveinithistory = 1
emmlogdir = /var/log/


[cache]


[cs357x]
port = 40000
suppresscmd08 = 1


[cccam]
port = 12000
nodeid = FFB6378F104B150A
version = 2.3.0
reshare = 2


[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox


[webif]
httpport = 17000
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = 120

User

Spoiler

user = serverboxau = skyv13,hdplus02
group = 1,2






#[account]
disabled = 0
user = keller
pwd = ich
#uniq = 3
#betatunnel = 1835.FFFF:1722
caid = 09C4,1843
group = 1,2

 

[laila-no1]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

moin,

bitter mach den reader mal so!!

Spoiler

[reader]
label = hdplus02
enable = 1
protocol = internal
device = /dev/sci1
caid = 1843
rsakey = BF...D5
boxkey = A7...7C
detect = cd
[B][COLOR=#ff0000]mhz  = 540
cardmhz = 2700
group = 2[/COLOR][/B]
emmcache = 1,3,2

Oscam neu starten nach den Änderungungen!....und wenns nicht funzt uns gleich wieder einen Log zeigen.

lg, Laila

 

[janni1]

AW: brauche hilfe bei Oscam Einstellungen HD+ Karte geht nicht

Hi,
mit diesen Einstellungen von @pehedima lief es ja laut Log schon!

autospeed = 0
mhz = 368
cardmhz = 2700

Spoiler

2014/11/17 23:58:09 D127D0 r hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/17 23:58:09 D127D0 r hdplus02 [internal] TEST tempo mhz check = 368 mhz
2014/11/17 23:58:09 D127D0 r hdplus02 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2014/11/17 23:58:10 D127D0 r hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/17 23:58:10 D127D0 r hdplus02 [internal] Card responded ok for ifsd request of 160
2014/11/17 23:58:11 D127D0 r hdplus02 [internal] detect native nagra card

nur leider fehlt der Rest des Logs.

Versuch es doch bitte noch einmal damit
oder auch gleich mal so:

autospeed = 0
mhz = 385
cardmhz = 2700

oder auch mal so

autospeed = 0
mhz = 337
cardmhz = 2700

Am besten du ziehst beim Test erstmal die V13 raus und postest ein Log vom Start bis zur Anfrage eines HDplus-Senders.

Gruß
janni1