Bei aktuellen OpenATV 6.2/6.3/ oscam11.546 bleiben einige Sender dunkel

[Jogi1967]

Hallo zusammen,
habe VU Uno4kse Gerät lief ohne Probleme mit 6.2 alle Sky Sender Ok , auch die HD+ Sender dann nach Update war Sky dunkel, habe dann auf 6.3 upgedatet selbe Problem.
Dann 6.1 installiert da läuft alles.
Wenn ich auf 6.2 od. 6.3 update dann laufen z.B. alle HD+ Sender (Rtl, Sat1, Pro7...) aber die Sky Sender nicht bzw. vereinzelte, 2-3 Sender, sonst alles dunkel.
Bei 6.1 sind auch bei vielen Sender länger Umschaltzeiten.

Kennt jemand das Problem und hat eine Lösung?
Vielen Dank im voraus für eure Hilfe
Gruß Jogi

 

[bl0w]

Wir helfen gerne wenn du uns deine configs von oscam zeigst

 

[Jogi1967]

Hallo,
so hoffe ist richtige

Wir helfen gerne wenn du uns deine configs von oscam zeigst

Du musst Regestriert sein, um das angehängte Bild zusehen.

Du musst Regestriert sein, um das angehängte Bild zusehen.

Achso habe "enigma2-softcams-oscam-all-images_11.546-emu-r797-arm+mips_all die OScam" installiert

 

[bl0w]

Kopiere doch bitte den Inhalt deiner oscam.conf, oscam.server und oscam.user hier in einen Spoiler. Bei den Bilder kann ich jetzt nix erkennen, sorry!

 

[merlin57]

Und 4× das gleiche

 

[Jogi1967]

Kopiere doch bitte den Inhalt deiner oscam.conf, oscam.server und oscam.user hier in einen Spoiler. Bei den Bilder kann ich jetzt nix erkennen,
oscam.conf

Spoiler

[global]
logfile = /tmp/ncam.log
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -20
maxlogsize = 1024
waitforcards_extra_delay = 200
preferlocalcards = 1
usrfile = /tmp/ncamuser.log
cwlogdir = /tmp/cw
readerrestartseconds = 1
dropdups = 1
block_same_ip = 0
block_same_name = 0
lb_nbest_readers = 6
lb_nfb_readers = 6
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
failbantime = 1440
failbancount = 2

[anticasc]
enabled = 1
numusers = 1
samples = 5
penalty = 1
aclogfile = /tmp/aclog.log
denysamples = 4

[cache]
delay = 100
max_time = 30
max_hit_time = 60
cacheexenablestats = 1
csp_allow_request = 0
csp_allow_reforward = 1
cacheex_cw_check = 05@032830:88:2000,05@030B00:88:2000
csp_block_fakecws = 1
cwcycle_check_enable = 1
cwcycle_check_caid = 0500,0100,1811

[cs378x]
port = 13001@1811:3600,3315,3311
suppresscmd08 = 1

[newcamd]
port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF
key = 0102030405060708091011121314
mgclient = 1

[cccam]
port = 9000
nodeid = 43F7DDF9102A157E
version = 2.3.0
reshare = 0
reshare_mode = 0
stealth = 1

[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 117440512

[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8181
httpuser = root
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,255.255.255.255

oscam.server

Spoiler

[reader]
label = server1
enable = 1
protocol = cccam
device = server1.ergoproxy.net,61000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

[reader]
label = server2
enable = 1
protocol = cccam
device = server2.ergoproxy.net,62000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

[reader]
label = server3
enable = 1
protocol = cccam
device = server3.ergoproxy.net,63000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

[reader]
label = server4
enable = 1
protocol = cccam
device = server4.ergoproxy.net,64000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

[reader]
label = server5
enable = 1
protocol = cccam
device = server5.ergoproxy.net,65000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

oscam.user

Spoiler

[account]
user = dvbapiau
keepalive = 1
monlevel = 4
au = 1
group = 1,2,3,4,5,6,7,8,9,10

oscam.user

Spoiler

[account]
user = dvbapiau
keepalive = 1
monlevel = 4
au = 1
group = 1,2,3,4,5,6,7,8,9,10

so

bo bekomme den Spoiler nicht hin
oscam.user

Spoiler

[account]
user = dvbapiau
keepalive = 1
monlevel = 4
au = 1
group = 1,2,3,4,5,6,7,8,9,10

oscam.server

Spoiler

[reader]
label = server1
enable = 1
protocol = cccam
device = server1.ergoproxy.net,61000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

[reader]
label = server2
enable = 1
protocol = cccam
device = server2.ergoproxy.net,62000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

[reader]
label = server3
enable = 1
protocol = cccam
device = server3.ergoproxy.net,63000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

[reader]
label = server4
enable = 1
protocol = cccam
device = server4.ergoproxy.net,64000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

[reader]
label = server5
enable = 1
protocol = cccam
device = server5.ergoproxy.net,65000
user = Vuplus189347
password = YD7VGvuaGaJ6
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 0500:032830;0500:030B00

oscam.conf

Spoiler

[global]
logfile = /tmp/ncam.log
clienttimeout = 12000
fallbacktimeout = 3000
bindwait = 60
netprio = 1
nice = -20
maxlogsize = 1024
waitforcards_extra_delay = 200
preferlocalcards = 1
usrfile = /tmp/ncamuser.log
cwlogdir = /tmp/cw
readerrestartseconds = 1
dropdups = 1
block_same_ip = 0
block_same_name = 0
lb_nbest_readers = 6
lb_nfb_readers = 6
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j
failbantime = 1440
failbancount = 2

[anticasc]
enabled = 1
numusers = 1
samples = 5
penalty = 1
aclogfile = /tmp/aclog.log
denysamples = 4

[cache]
delay = 100
max_time = 30
max_hit_time = 60
cacheexenablestats = 1
csp_allow_request = 0
csp_allow_reforward = 1
cacheex_cw_check = 05@032830:88:2000,05@030B00:88:2000
csp_block_fakecws = 1
cwcycle_check_enable = 1
cwcycle_check_caid = 0500,0100,1811

[cs378x]
port = 13001@1811:3600,3315,3311
suppresscmd08 = 1

[newcamd]
port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF
key = 0102030405060708091011121314
mgclient = 1

[cccam]
port = 9000
nodeid = 43F7DDF9102A157E
version = 2.3.0
reshare = 0
reshare_mode = 0
stealth = 1

[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 117440512

[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8181
httpuser = root
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,255.255.255.255

sorry ging nicht anders :blush:

 

[Pilot]

Spoiler setzen. Dann Enter drücken, damit du Platz für das kopierte bekommst.. Speichern.

 

[Jogi1967]

ah hatte doch geklappt, dauerte nur :laughing::smirk:

 

[bl0w]

Sieht nach payserver aus, oder?

 

[Jogi1967]

Sieht nach payserver aus, oder?

ja

 

[merlin57]

Dann frage mal da besser

 

[Pilot]

Im DEB gibt es keine Hilfen für payserver und deren Kunden.
Daher hier zu.