Banana PI oscam stürzt ab

Derek Buegel · 4. August 2016

Ach Du meinst im IPC-WI. Ja aber oscam läuft ja, Karte wird eingelesen. Das ist ja nicht mein Problem.

Code:

2016/08/04 21:19:53 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11272 (arm-linux-gnueabihf)
2016/08/04 21:19:53 00000000 s (main) System name = Linux
2016/08/04 21:19:53 00000000 s (main) Host name = bananapi
2016/08/04 21:19:53 00000000 s (main) Release = 3.4.39-BPI-M3-Kernel
2016/08/04 21:19:53 00000000 s (main) Version = #1 SMP PREEMPT Wed Dec 2 00:01:00 UTC 2015
2016/08/04 21:19:53 00000000 s (main) Machine = armv7l
2016/08/04 21:19:53 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2726
2016/08/04 21:19:53 00000000 s (config) userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2016/08/04 21:19:53 00000000 s (main) signal handling initialized
2016/08/04 21:19:53 00000000 s (net) monitor: initialized (fd=5, port=30000)
2016/08/04 21:19:53 00000000 s (net) cs378x: initialized (fd=6, port=23355)
2016/08/04 21:19:53 00000000 s (net) cccam: initialized (fd=7, port=33355)
2016/08/04 21:19:53 00000000 s (reader) hd01 [pcsc] creating thread for device 0
2016/08/04 21:19:53 00000000 s (reader) OSEmu [cs357x] creating thread for device 127.0.0.1
2016/08/04 21:19:53 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/08/04 21:19:53 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/08/04 21:19:53 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2016/08/04 21:19:53 00000000 s (anticasc) anti cascading disabled
2016/08/04 21:19:53 427049FE p (reader) OSEmu [cs357x] proxy 127.0.0.1:54321
2016/08/04 21:19:53 427049FE p (reader) OSEmu [cs357x] proxy initialized, server 127.0.0.1:54321
2016/08/04 21:19:53 0B92F4A1 r (reader) hd01 [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2016/08/04 21:19:53 1F42FA14 h (webif) webif: decompressed 173847 bytes back into 422400 bytes
2016/08/04 21:19:53 1F42FA14 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2016/08/04 21:19:54 0B92F4A1 r (reader) hd01 [pcsc] PCSC was opened with handle: 1580713040
2016/08/04 21:19:54 0B92F4A1 r (reader) hd01 [pcsc] card detected
2016/08/04 21:19:54 0B92F4A1 r (reader) hd01 [pcsc] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2016/08/04 21:19:55 0B92F4A1 r (reader) hd01 [pcsc] detect native nagra card
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [pcsc] ready for requests
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [pcsc] found card system nagra
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] ROM: D N A S P 1 8 0
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] REV: M e r 0 0 0
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] SER: ############
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] CAID: 1843
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] Prv.ID: 00 00 00 00
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] IRD ID: ############
2016/08/04 21:19:56 0B92F4A1 r (reader) hd01 [nagra] active to: 2013/11/20 11:59
2016/08/04 21:19:57 0B92F4A1 r (reader) hd01 [nagra] -----------------------------------------
2016/08/04 21:19:57 0B92F4A1 r (reader) hd01 [nagra] |id |tier |valid from |valid to |
2016/08/04 21:19:57 0B92F4A1 r (reader) hd01 [nagra] +----+--------+------------+------------+
2016/08/04 21:19:57 0B92F4A1 r (reader) hd01 [nagra] |8011|0066 |2012/07/13 |2013/07/14 |
2016/08/04 21:19:57 0B92F4A1 r (reader) hd01 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2016/08/04 21:19:57 0B92F4A1 r (reader) hd01 [nagra] -----------------------------------------

Ja ich weis, das die Karte abgelaufen ist und ich weis auch das es eine HD02 ist. Ist auch nur ein Dummy.
Es ist auch egal, ob ich oscam über Konsole oder übers IPC-WI starte, es bleibt rot.
MfG

Osprey · 4. August 2016

Derek Beitrag #14

LG Osprey

Derek Buegel · 4. August 2016

Sorry Osprey hab ich übersehen.

Code:

root@bananapi ~ > /etc/crontab
/etc/crontab: Zeile 20: 17: Kommando nicht gefunden.
/etc/crontab: Zeile 21: 25: Kommando nicht gefunden.
/etc/crontab: Zeile 22: 47: Kommando nicht gefunden.
/etc/crontab: Zeile 23: 52: Kommando nicht gefunden.
/etc/crontab: Zeile 46: 1: Kommando nicht gefunden.
/etc/crontab: Zeile 50: 1: Kommando nicht gefunden.

Das müsste Zeile 20 - 23 sein.

Code:

# m h dom mon dow user  command
17 *    * * *   root    cd / && run-parts --report /etc/cron.hourly
25 6    * * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
47 6    * * 7   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
52 6    1 * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )

MfG

Osprey · 4. August 2016

Das passt alles jetzt prima. der Befehl /etc/crontab sollte nur Auskunft geben ob du rechte hast auszuführen. Das jetzt die Fehlermeldungen kommen ist normal da die Zeile einzeln nicht auf diese Weise gestartet werden können. Sowie ich das jetzt sehe ist das Problem gelöst. Ich liebe Linux aber das "sudo gedöns" nervt schon manchmal.

Derek Buegel · 4. August 2016

Cron - OSEmu - OScam bleiben im IPC-WI rot.
Evtl muss ich mal komplett neu starten? Habe jetzt nur die Drei neu gestartet.

MfG

Osprey · 5. August 2016

Hi Derek, bist du weitergekommen? Wenn du oscam über das oscamWebIF beendest mit shutdown sollte der watchdog spätestens nach 1 Minute oscam wieder starten. So kann geprüft werden ob cron aktiv ist.

LG Osprey

Derek Buegel · 5. August 2016

I.M. lauft oscam überhaupt nicht. Habe den pcsc-Reader abgezogen.
Wenn ich den Reader anstecke wird oscam nach einer Minute per watchdog gestartet und läuft auch.

Habe gerade den Reader noch mal abgezogen (im laufenden Bertieb), da stürzt oscam nach kurzer Zeit ab.

Cron -OScam - OSEmu werden weiterhin rot im IPC-WI angezeigt.

MfG
Hier mal ein oscam-Log

Code:

2016/08/05 18:25:02 1891EC92 h    (webif) HTTP Server running. ip=0.0.0.0 port=16002
2016/08/05 18:25:04 06E6EF35 r   (reader) hd01 [pcsc] Cannot open device: 0

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Fri Aug  5 18:26:02 2016
-------------------------------------------------------------------------------
2016/08/05 18:26:02 00000000 s >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r11272 (arm-linux-gnueabihf)
2016/08/05 18:26:02 00000000 s     (main) System name    = Linux
2016/08/05 18:26:02 00000000 s     (main) Host name      = bananapi
2016/08/05 18:26:02 00000000 s     (main) Release        = 3.4.39-BPI-M3-Kernel
2016/08/05 18:26:02 00000000 s     (main) Version        = #1 SMP PREEMPT Wed Dec 2 00:01:00 UTC 2015
2016/08/05 18:26:02 00000000 s     (main) Machine        = armv7l
2016/08/05 18:26:02 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 19661
2016/08/05 18:26:02 00000000 s   (config) userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2016/08/05 18:26:02 00000000 s     (main) signal handling initialized
2016/08/05 18:26:02 00000000 s      (net) monitor: initialized (fd=5, port=30000)
2016/08/05 18:26:02 00000000 s      (net) cs378x: initialized (fd=6, port=23355)
2016/08/05 18:26:02 00000000 s      (net) cccam: initialized (fd=7, port=33355)
2016/08/05 18:26:02 00000000 s   (reader) hd01 [pcsc] creating thread for device 0
2016/08/05 18:26:02 00000000 s   (reader) OSEmu [cs357x] creating thread for device 127.0.0.1
2016/08/05 18:26:02 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/08/05 18:26:02 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/08/05 18:26:02 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2016/08/05 18:26:02 00000000 s (anticasc) anti cascading disabled
2016/08/05 18:26:02 75A5714F p   (reader) OSEmu [cs357x] proxy 127.0.0.1:54321
2016/08/05 18:26:02 75A5714F p   (reader) OSEmu [cs357x] proxy initialized, server 127.0.0.1:54321
2016/08/05 18:26:02 0881839A r   (reader) hd01 [pcsc] Cannot open device: 0
2016/08/05 18:26:02 608D5431 h    (webif) webif: decompressed 173847 bytes back into 422400 bytes
2016/08/05 18:26:03 608D5431 h    (webif) HTTP Server running. ip=0.0.0.0 port=16002
2016/08/05 18:26:04 0881839A r   (reader) hd01 [pcsc] Cannot open device: 0
Hier hab ich der Reader angesteckt
2016/08/05 18:26:14 0881839A r        (-) -- Skipped 4 duplicated log lines --
2016/08/05 18:26:14 0881839A r   (reader) hd01 [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2016/08/05 18:26:15 0881839A r   (reader) hd01 [pcsc] PCSC was opened with handle: 550369893
2016/08/05 18:26:15 0881839A r   (reader) hd01 [pcsc] card detected
2016/08/05 18:26:16 0881839A r   (reader) hd01 [pcsc] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2016/08/05 18:26:17 0881839A r   (reader) hd01 [pcsc] detect native nagra card
2016/08/05 18:26:18 0881839A r   (reader) hd01 [pcsc] ready for requests
2016/08/05 18:26:18 0881839A r   (reader) hd01 [pcsc] found card system nagra
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] ROM:    D N A S P 1 8 0
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] REV:    M e r 0 0 0
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] SER:    ############
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] CAID:   1843
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] Prv.ID: 00 00 00 00
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] IRD ID: ############
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] active to: 2013/11/20 11:59
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] -----------------------------------------
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] |id  |tier    |valid from  |valid to    |
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] +----+--------+------------+------------+
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] |8011|0066    |2012/07/13  |2013/07/14  |
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] |8011|0067    |2010/01/19  |2010/01/20  |
2016/08/05 18:26:18 0881839A r   (reader) hd01 [nagra] -----------------------------------------

Ich habe ja ein super funktionierendes System (Odroid C2 [ARM Jessie 64]). Würde aber gerne herausfinden wo es hier hakt?

Derek Buegel · 6. August 2016

Habe gerade noch mal das OS neu aufgesetzt und auch noch ein bisschen in der sources.list "rumgepfuscht".

MfG

Smiley007 · 6. August 2016

dann hole die eine EasyMouse und in 2 Tagen hast du Ruhe mit dem komischen Reader

Derek Buegel · 6. August 2016

Habe etliche Easymouses hier liegen.
Hier ist der Weg das Ziel, Habe ein "Rudel" interne Igel-Cardreader gekauft, um die Versandkosten zu kompensieren, und die kommen da rein.

Sie müssen registriert sein, um Links zu sehen.

MfG

Smiley007 · 6. August 2016

also mein Pi rennt mit der EasyMouse monatelang ohne Neustarts problemlos

Derek Buegel · 6. August 2016

Mein odroid C2 mit Jessie ARM64 auch mit pcsc-Readern.

Du musst angemeldet sein, um Bilder zu sehen.

MfG

Derek Buegel · 7. August 2016

Code:

Rotiere Logfiles mit neuer Konfiguration..
error: skipping "/var/log/aptitude" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/dpkg.log" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/alternatives.log" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/syslog" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/mail.info" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/mail.warn" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/mail.err" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/mail.log" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/daemon.log" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/kern.log" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/auth.log" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
error: skipping "/var/log/user.log" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation.
.
.
.

.

Irgendwo scheine ich nicht die nötigen Rechte zu haben?

MfG

Kann es sein, das es Probleme mit dem A83 Prozessor gibt?

Code:

errorHandlerPsi :

PHP throws a error
Level : 2 Message : fopen(/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq): failed to open stream: Permission denied File : /var/www/ipc/phpsysinfo/includes/class.CommonFunctions.inc.php Line : 237
errorHandlerPsi :

PHP throws a error
Level : 2 Message : fopen(/sys/devices/system/cpu/cpu1/cpufreq/cpuinfo_cur_freq): failed to open stream: Permission denied File : /var/www/ipc/phpsysinfo/includes/class.CommonFunctions.inc.php Line : 237
errorHandlerPsi :

PHP throws a error
Level : 2 Message : fopen(/sys/devices/system/cpu/cpu2/cpufreq/cpuinfo_cur_freq): failed to open stream: Permission denied File : /var/www/ipc/phpsysinfo/includes/class.CommonFunctions.inc.php Line : 237
errorHandlerPsi :

PHP throws a error
Level : 2 Message : fopen(/sys/devices/system/cpu/cpu3/cpufreq/cpuinfo_cur_freq): failed to open stream: Permission denied File : /var/www/ipc/phpsysinfo/includes/class.CommonFunctions.inc.php Line : 237
errorHandlerPsi :

PHP throws a error
Level : 2 Message : fopen(/sys/devices/system/cpu/cpu4/cpufreq/cpuinfo_cur_freq): failed to open stream: Permission denied File : /var/www/ipc/phpsysinfo/includes/class.CommonFunctions.inc.php Line : 237
errorHandlerPsi :

PHP throws a error
Level : 2 Message : fopen(/sys/devices/system/cpu/cpu5/cpufreq/cpuinfo_cur_freq): failed to open stream: Permission denied File : /var/www/ipc/phpsysinfo/includes/class.CommonFunctions.inc.php Line : 237
errorHandlerPsi :

PHP throws a error
Level : 2 Message : fopen(/sys/devices/system/cpu/cpu6/cpufreq/cpuinfo_cur_freq): failed to open stream: Permission denied File : /var/www/ipc/phpsysinfo/includes/class.CommonFunctions.inc.php Line : 237
errorHandlerPsi :

PHP throws a error
Level : 2 Message : fopen(/sys/devices/system/cpu/cpu7/cpufreq/cpuinfo_cur_freq): failed to open stream: Permission denied File : /var/www/ipc/phpsysinfo/includes/class.CommonFunctions.inc.php Line : 237

Derek Buegel · 12. August 2016

So, jetzt habe ich es geschafft.
Die Banane läuft zwar noch (ssh-Zugriff möglich) habe aber keinen HDMI-Signal mehr.
Habe hier noch einen Odroid xu3 liegen. Werde erst mal mit dem weiter machen.

MfG

...und es läuft sofort. IPC mag die Banane nicht!

Oscam kompilieren dauert weniger als 1min.

Frage - wer hat das auf gelöst gesetzt und warum?

Alex · 14. August 2016

...und es läuft sofort. IPC mag die Banane nicht!

Kann ich so nicht bestätigen. Für IPC ist das auch "nur" eine weitere ARMEL Plattform und wird behandelt wie ein PI.
Hab außerdem selbst einen Banana PI M1 Pro, weöcher wunderbar funktioniert.

Banana PI oscam stürzt ab

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz