Anadol Multibox Twin SE PurE²

[Derek Buegel]

Ich habe am Freitag auf meiner Anadol Multibox SE (Novaler) mal PutE²7.3 installiert.
Nach einem Neustart zeige der Receiver nur noch ein Sprachgewirr zwischen englisch und deutsch an.
Wenn ich nun in die Sracheinstellungen gehen will, stürzt die Box ab und es kommt ein Bluescreen.

Spoiler: Crashlog

pure2 Enigma2 crash log

crashdate=Fri Jul 21 16:22:51 2023
compiledate=Jul 16 2023
skin=Estuary/skin.xml
sourcedate=2023-07-16
branch=7.0
rev=32613+19eac98
component=Enigma2

model=multiboxse
machinebuild=novaler4kse
imageversion=7.3
imagebuild=001

kernelcmdline=root=/dev/mmcblk0p23 rootsubdir=linuxrootfs4 rootfstype=ext4 kernel=/dev/mmcblk0p22 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),18M(recovery),2M(bootoptions),2M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastplay),20M(kernel),20M(trustedcore),4M(misc),1024M(system),150M(vendor),306M(dvb),256M(cache),50M(private),8M(securestore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=937M mmz=ddr,0,0,60M vmalloc=500M

nimsockets:
NIM Socket 0:
    Type: DVB-S2X
    Name: avl62x1
    Has_Outputs: no
    Frontend_Device: 0
    I2C_Device: 0
    Supports_Blind_Scan: yes
NIM Socket 1:
    Type: DVB-S2X
    Name: avl62x1
    Has_Outputs: no
    Frontend_Device: 1
    I2C_Device: 0
    Supports_Blind_Scan: yes



16:21:43.2417 [Enigma] Python path is '/usr/lib/enigma2/python'.
16:21:43.2418 [Enigma] DVB API version 5, DVB API version minor 11.
16:21:43.2418 [Enigma] Enigma debug level 3.
16:21:56.7832 [eServicePeer] ADD Peer bre2ze4k=bre2ze4k.local:8001
16:21:56.7890 [eServicePeer] ADD Peer bre2ze4k=bre2ze4k.local:8001
16:21:57.9646 [eDVBPESReader] Created. Opening demux
16:21:57.9647 [eDVBPESReader] Created. Opening demux
16:22:51.9750 Traceback (most recent call last):
16:22:51.9751   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 305, in action
16:22:51.9755   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 276, in action
16:22:51.9757   File "FNCStyle.py", line 473, in FNCStyle.IconWall_4x3.okbuttonClick
16:22:51.9759   File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 10, in __call__
16:22:51.9762   File "/usr/lib/enigma2/python/Screens/Menu.py", line 575, in runScreen
16:22:51.9779     self.openDialog(*eval(arg[1]))
16:22:51.9782   File "/usr/lib/enigma2/python/Screens/Menu.py", line 581, in openDialog
16:22:51.9804     self.session.openWithCallback(self.menuClosed, *dialog)
16:22:51.9806   File "/usr/lib/enigma2/python/pure2startup.py", line 161, in openWithCallback
16:22:51.9811     dialog = self.open(screen, *arguments, **kwargs)
16:22:51.9816              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
16:22:51.9817   File "/usr/lib/enigma2/python/pure2startup.py", line 172, in open
16:22:51.9822     dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
16:22:51.9828                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
16:22:51.9828   File "/usr/lib/enigma2/python/pure2startup.py", line 111, in instantiateDialog
16:22:51.9832     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
16:22:51.9838            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
16:22:51.9838   File "/usr/lib/enigma2/python/pure2startup.py", line 138, in doInstantiateDialog
16:22:51.9842     dialog.applySkin()
16:22:51.9843   File "/usr/lib/enigma2/python/Screens/Screen.py", line 244, in applySkin
16:22:51.9847   File "/usr/lib/enigma2/python/Screens/Screen.py", line 276, in createGUIScreen
16:22:51.9849   File "/usr/lib/enigma2/python/Screens/LocaleSelection.py", line 149, in layoutFinished
16:22:51.9852   File "/usr/lib/enigma2/python/Screens/LocaleSelection.py", line 340, in moveToLocale
16:22:51.9854   File "/usr/lib/enigma2/python/Components/Sources/List.py", line 85, in setCurrentIndex
16:22:51.9857   File "/usr/lib/enigma2/python/Components/Sources/List.py", line 62, in selectionChanged
16:22:51.9860   File "/usr/lib/enigma2/python/Screens/LocaleSelection.py", line 196, in selectionChanged
16:22:51.9862   File "/usr/lib/enigma2/python/Screens/LocaleSelection.py", line 209, in updateText
16:22:51.9864   File "/usr/lib/enigma2/python/Components/International.py", line 766, in splitPackage
16:22:51.9869 AttributeError: 'NoneType' object has no attribute 'split'
16:22:51.9870 [ePyObject] (PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xaf338650>>,('OkCancelActions', 'ok')) failed)


dmesg

<4>UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<4>UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<6>yaffs: dev is 187695105 name is "mmcblk0p1" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"
<7>yaffs: yaffs: MTD device 1 either not valid or unavailable
<6>yaffs: dev is 187695105 name is "mmcblk0p1" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"
<7>yaffs: yaffs: MTD device 1 either not valid or unavailable
<6>tntfs info (device mmcblk0p1, pid 3370): ntfs_fill_super(): fail_safe is enabled.
<4>UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<4>UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<6>yaffs: dev is 187695107 name is "mmcblk0p3" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3"
<7>yaffs: yaffs: MTD device 3 either not valid or unavailable
<6>yaffs: dev is 187695107 name is "mmcblk0p3" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3"
<7>yaffs: yaffs: MTD device 3 either not valid or unavailable
<6>tntfs info (device mmcblk0p3, pid 3409): ntfs_fill_super(): fail_safe is enabled.

 

[DEB ChatGPT]

Es scheint, dass nach der Installation von PurE²7.3 auf Ihrer Anadol Multibox SE (Novaler) ein Problem aufgetreten ist. Der Receiver zeigt nun ein Sprachgewirr zwischen Englisch und Deutsch an und stürzt ab, wenn Sie versuchen, in die Spracheinstellungen zu gehen. Es wird auch ein Bluescreen angezeigt.

Der Crashlog zeigt, dass der Absturz beim Versuch auftritt, das Dialogfenster für die Spracheinstellungen zu öffnen. Es gibt einen Fehler beim Aufteilen des Pakets, der zu einem Attributfehler führt. Es scheint, dass ein bestimmtes Attribut, das für die Spracheinstellungen benötigt wird, nicht gefunden werden kann.

Es könnte sein, dass während der Installation von PurE²7.3 ein Fehler aufgetreten ist oder dass das Image nicht vollständig kompatibel mit Ihrer Anadol Multibox SE ist. Es könnte auch sein, dass es ein Problem mit den Spracheinstellungen selbst gibt.

Um das Problem zu lösen, empfehle ich Ihnen, die folgenden Schritte auszuführen:

1. Versuchen Sie, den Receiver neu zu starten und zu prüfen, ob das Problem weiterhin besteht. Manchmal kann ein einfacher Neustart das Problem lösen.

2. Wenn das Problem weiterhin besteht, versuchen Sie, das PurE²7.3-Image erneut zu installieren. Stellen Sie sicher, dass Sie das richtige Image für Ihre Anadol Multibox SE verwenden und dass die Installation ordnungsgemäß durchgeführt wird. Überprüfen Sie auch, ob es eine neuere Version des Images gibt, die möglicherweise das Problem behebt.

3. Wenn das Problem nach der erneuten Installation des Images weiterhin besteht, sollten Sie die Entwickler von PurE² kontaktieren und das Problem melden. Sie können dies normalerweise über das offizielle Forum oder die Supportseite des Projekts tun. Geben Sie alle relevanten Informationen an, einschließlich des Crashlogs, um den Entwicklern bei der Fehlerbehebung zu helfen.

4. Wenn Sie die Spracheinstellungen ändern müssen und die Box abstürzt, können Sie versuchen, die Spracheinstellungen über die Kommandozeile zu ändern. Verbinden Sie sich dazu per SSH mit Ihrem Receiver und verwenden Sie den Befehl "setlanguage", gefolgt von der gewünschten Sprache. Zum Beispiel: "setlanguage de" für Deutsch oder "setlanguage en" für Englisch. Beachten Sie jedoch, dass dies möglicherweise nicht das zugrunde liegende Problem behebt und dass es immer noch zu Abstürzen kommen kann.

Ich hoffe, dass diese Schritte Ihnen helfen, das Problem mit den Spracheinstellungen auf Ihrer Anadol Multibox SE zu lösen. Wenn das Problem weiterhin besteht, empfehle ich Ihnen, sich an den Support von PurE² zu wenden, um weitere Unterstützung zu erhalten.

 

[Derek Buegel]

die Entwickler von PurE² kontaktieren

Deshalb habe ich ja den Thread eröffnet.
Ich hoffe, das @jack1.9 hier mitliest.

 

[DEB ChatGPT]

Es tut mir leid, aber als KI-basierte Assistentin habe ich keinen Zugriff auf Informationen über Benutzer in einem bestimmten Forum. Ich kann nicht sagen, ob @jack1.9 in diesem Thread mitliest oder nicht. Es ist jedoch möglich, dass andere Benutzer oder möglicherweise ein Moderator oder Administrator des Forums Ihnen bei Ihrem Problem helfen können. Sie können weiterhin auf den Thread antworten und hoffen, dass jemand mit relevantem Wissen Ihre Frage beantwortet.

 

[jack1.9]

Versuch mal bitte Menue, Einstellungen ,Bedienung,Oberfläche dann ganz runter bis auf Gebietschema Sprache dort auf Deutsch und dann speichern . Leider noch sehr versteckt sorry

 

[Derek Buegel]

Wo genau?
Sobald ich auf Locale/Language Settings gehe kommt der Bluescreen.

Spoiler

Du musst Regestriert sein, um das angehängte Bild zusehen.

Ich versuche es mal über Konsole, wie der Bot vorgeschlagen hat.
Das geht so nicht, wie der Bot schreibt.

Spoiler

setlanguage de
-bash: setlanguage: command not found

 

[jack1.9]

Schon bei der Auswahl der kachel oder erst beim versuch zu wechseln ?

 

[Derek Buegel]

Stürzt ab sobald ich die Kachel mit OK auswähle.
Bei der Installation habe ich Deutsch gewählt und meine auch, das beim Erststart, die deutsche Sprache da war.
Ansonsten habe ich nur oscam vom Feed installiert.

 

[jack1.9]

Ich habe den Devs den Log mal weiter geleitet mal sehen ob sie etwas finden . Sonst ggf mal im Homeforum nachharken falls nichts kommt

 

[jack1.9]

habe die Info bekommen das sie versuchen es zeitnah zu beheben .denke da kommt zeitnah ein Update ... beta halt

 

[Derek Buegel]

Heute das System upgedatet.
Immer noch Absturz, beim Versuch die dt. Sprache einzustellen

Spoiler: Log

pure2 Enigma2 crash log

crashdate=Mon Jul 31 15:55:13 2023
compiledate=Jul 29 2023
skin=Estuary/skin.xml
sourcedate=2023-07-29
branch=7.0
rev=32657+564da03
component=Enigma2

model=multiboxse
machinebuild=novaler4kse
imageversion=7.3
imagebuild=001

kernelcmdline=root=/dev/mmcblk0p23 rootsubdir=linuxrootfs4 rootfstype=ext4 kernel=/dev/mmcblk0p22 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),18M(recovery),2M(bootoptions),2M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastplay),20M(kernel),20M(trustedcore),4M(misc),1024M(system),150M(vendor),306M(dvb),256M(cache),50M(private),8M(securestore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=937M mmz=ddr,0,0,60M vmalloc=500M

nimsockets:
NIM Socket 0:
    Type: DVB-S2X
    Name: avl62x1
    Has_Outputs: no
    Frontend_Device: 0
    I2C_Device: 0
    Supports_Blind_Scan: yes
NIM Socket 1:
    Type: DVB-S2X
    Name: avl62x1
    Has_Outputs: no
    Frontend_Device: 1
    I2C_Device: 0
    Supports_Blind_Scan: yes



15:54:06.8624 [Enigma] Python path is '/usr/lib/enigma2/python'.
15:54:06.8626 [Enigma] DVB API version 5, DVB API version minor 11.
15:54:06.8627 [Enigma] Enigma debug level 3.
15:54:39.1795 [eDVBPESReader] Created. Opening demux
15:54:39.1796 [eDVBPESReader] Created. Opening demux
15:55:12.9926 Traceback (most recent call last):
15:55:12.9928   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 305, in action
15:55:12.9934   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 276, in action
15:55:12.9937   File "FNCStyle.py", line 473, in FNCStyle.IconWall_4x3.okbuttonClick
15:55:12.9940   File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 10, in __call__
15:55:12.9943   File "/usr/lib/enigma2/python/Screens/Menu.py", line 575, in runScreen
15:55:12.9964     self.openDialog(*eval(arg[1]))
15:55:12.9968   File "/usr/lib/enigma2/python/Screens/Menu.py", line 581, in openDialog
15:55:12.9985     self.session.openWithCallback(self.menuClosed, *dialog)
15:55:12.9987   File "/usr/lib/enigma2/python/pure2startup.py", line 161, in openWithCallback
15:55:12.9993     dialog = self.open(screen, *arguments, **kwargs)
15:55:12.9999              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
15:55:12.9999   File "/usr/lib/enigma2/python/pure2startup.py", line 172, in open
15:55:13.0005     dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
15:55:13.0011                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
15:55:13.0012   File "/usr/lib/enigma2/python/pure2startup.py", line 111, in instantiateDialog
15:55:13.0016     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
15:55:13.0021            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
15:55:13.0022   File "/usr/lib/enigma2/python/pure2startup.py", line 138, in doInstantiateDialog
15:55:13.0026     dialog.applySkin()
15:55:13.0028   File "/usr/lib/enigma2/python/Screens/Screen.py", line 244, in applySkin
15:55:13.0032   File "/usr/lib/enigma2/python/Screens/Screen.py", line 276, in createGUIScreen
15:55:13.0034   File "/usr/lib/enigma2/python/Screens/LocaleSelection.py", line 148, in layoutFinished
15:55:13.0037   File "/usr/lib/enigma2/python/Screens/LocaleSelection.py", line 339, in moveToLocale
15:55:13.0039   File "/usr/lib/enigma2/python/Components/Sources/List.py", line 85, in setCurrentIndex
15:55:13.0042   File "/usr/lib/enigma2/python/Components/Sources/List.py", line 62, in selectionChanged
15:55:13.0045   File "/usr/lib/enigma2/python/Screens/LocaleSelection.py", line 195, in selectionChanged
15:55:13.0047   File "/usr/lib/enigma2/python/Screens/LocaleSelection.py", line 208, in updateText
15:55:13.0049   File "/usr/lib/enigma2/python/Components/International.py", line 766, in splitPackage
15:55:13.0054 AttributeError: 'NoneType' object has no attribute 'split'
15:55:13.0055 [ePyObject] (PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xaf0c44d0>>,('OkCancelActions', 'ok')) failed)


dmesg

<6>Booting Linux on physical CPU 0x0
<5>Linux version 4.4.35 (Pure2@www.hd-digital-satcrew.com) (gcc version 12.2.0 (GCC) ) #1 SMP Tue Feb 18 23:44:49 UTC 2020
<6>CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
<6>CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<5>initmrd: found no initmrd.
<6>Machine model: Hisilicon
<6>cma: Reserved 60 MiB at 0x35800000
<6>cma: Reserved 4 MiB at 0x3a400000
<6>Memory policy: Data cache writealloc
<7>-------------Fixed IO Mapping----------
<7>Virt,            Phys,             Size
<7>0xF9000000,    0xF8000000,    0x02000000
<7>--------------------------------------
<7>On node 0 totalpages: 239872
<7>free_area_init_node: node 0, pgdat c0bafc00, node_mem_map dfca1000
<7>  Normal zone: 1032 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 132096 pages, LIFO batch:31
<7>  HighMem zone: 107776 pages, LIFO batch:31
<6>PERCPU: Embedded 13 pages/cpu @dfc5d000 s22604 r8192 d22452 u53248
<7>pcpu-alloc: s22604 r8192 d22452 u53248 alloc=13*4096
<7>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<6>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 238840
<5>Kernel command line: root=/dev/mmcblk0p23 rootsubdir=linuxrootfs4 rootfstype=ext4 kernel=/dev/mmcblk0p22 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),18M(recovery),2M(bootoptions),2M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastplay),20M(kernel),20M(trustedcore),4M(misc),1024M(system),150M(vendor),306M(dvb),256M(cache),50M(private),8M(securestore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=937M mmz=ddr,0,0,60M vmalloc=500M
<6>log_buf_len individual max cpu contribution: 4096 bytes
<6>log_buf_len total cpu_extra contributions: 12288 bytes
<6>log_buf_len min size: 16384 bytes
<6>log_buf_len: 32768 bytes
<6>early log buf free: 14164(86%)
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 862904K/959488K available (7926K kernel code, 687K rwdata, 2232K rodata, 556K init, 522K bss, 31048K reserved, 65536K cma-reserved, 355316K highmem)
<5>Virtual kernel memory layout:
<5>    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
<5>    vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
<5>    lowmem  : 0xc0000000 - 0xe0400000   ( 516 MB)
<5>    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>      .text : 0xc0008000 - 0xc07c5cdc   (7928 kB)
<5>      .init : 0xc0a8d000 - 0xc0b18000   ( 556 kB)
<5>      .data : 0xc0b18000 - 0xc0bc3e6c   ( 688 kB)
<5>       .bss : 0xc0bc5000 - 0xc0c47938   ( 523 kB)
<6>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>Hierarchical RCU implementation.
<6>    Build-time adjustment of leaf fanout to 32.
<6>NR_IRQS:352
<6>clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>CPU: Testing write buffer coherency: ok
<6>ftrace: allocating 26342 entries in 78 pages
<6>CPU0: update cpu_capacity 1024
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>Setting up static identity map for 0x8280 - 0x82d8
<4>CPU: hi3798mv200
<7>CPU1: powerup
<6>CPU1: update cpu_capacity 1024
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<7>CPU2: powerup
<6>CPU2: update cpu_capacity 1024
<6>CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<7>CPU3: powerup
<6>CPU3: update cpu_capacity 1024
<6>CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>Brought up 4 CPUs
<6>SMP: Total of 4 processors activated (12681.21 BogoMIPS).
<6>CPU: All CPU(s) started in SVC mode.
<6>CPU3: update max cpu_capacity 1024
<6>devtmpfs: initialized
<6>VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<4>PCIe read alloc area phyaddr 08  size 00000000
<4>PCIe write alloc area phyaddr 08  size 00000000
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>CPU3: update max cpu_capacity 1024
<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>Serial: AMBA PL011 UART driver
<6>f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 25, base_baud = 0) is a PL011 rev2
<6>console [ttyAMA0] enabled
<6>f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 26, base_baud = 0) is a PL011 rev2
<6>f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 27, base_baud = 0) is a PL011 rev2
<6>pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered
<6>pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered
<6>pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered
<6>pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered
<6>pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered
<6>pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered
<6>pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered
<6>pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered
<6>pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered
<6>pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered
<4>hisilicon-pcie: probe of f0001000.pcie failed with error -1
<6>hisi_iommu_ptable_addr:phy 0x1e800000    size:0x400000
<6>hisi_iommu_err_rdaddr :phy 0x1f769600    size:0x200
<6>hisi_iommu_err_wraddr :phy 0x1f769800     size:0x200
<6>in hisi_iommu_domain_init start
<6>in hisi_iommu_domain_init end
<6>vgaarb: loaded
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
<6>ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
<6>spi_master spi0: will run message pump with realtime priority
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>media: Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>clocksource: Switched to clocksource hisp804
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>PCI: CLS 0 bytes, default 64
<6>NetWinder Floating Point Emulator V0.97 (double precision)
<6>hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available
<6>futex hash table entries: 1024 (order: 4, 65536 bytes)
<5>VFS: Disk quotas dquot_6.6.0
<6>VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<5>FS-Cache: Netfs 'cifs' registered for caching
<6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
<6>fuse init (API version 7.23)
<7>yaffs: yaffs built Installing.
<6>bounce: pool size: 64 pages
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>io scheduler cfq registered
<6>hiahci-phy: registered new sata phy driver
<6>brd: module loaded
<6>loop: module loaded
<4>ahci: probe of f9900000.hiahci failed with error -1
<6>hifmc100: registerd new interface driver hifmc100.
<5>hifmc100: Found flash memory controller hifmc100.
<6>hifmc100: no found spi-nor device.
<6>hifmc100: no found nand device.
<6>hifmc100: no found spi-nand device.
<6>FEPHY:addr=2, la_am=0xd, ldo_am=0x3, r_tuning=0x12
<6>libphy: himii: probed
<6>hi_eth: attached port 0 PHY 2 to driver HiSilicon Festa v330
<6>/soc/ethernet@f9840000/ethernet_phy@0 has invalid PHY address=255
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-pci: EHCI PCI platform driver
<6>ehci-platform: EHCI generic platform driver
<6>ehci-platform f9890000.ehci: EHCI Host Controller
<6>ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
<6>ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000
<6>ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-pci: OHCI PCI platform driver
<6>ohci-platform: OHCI generic platform driver
<6>ohci-platform f9880000.ohci: Generic Platform OHCI controller
<6>ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
<6>ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
<6>xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00030010
<6>xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
<6>usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<6>usbcore: registered new interface driver usb-storage
<6>mousedev: PS/2 mouse device common for all mice
<6>usbcore: registered new interface driver xpad
<6>i2c /dev entries driver
<6>IR NEC protocol handler initialized
<6>IR RC5(x/sz) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>IR SANYO protocol handler initialized
<6>IR Sharp protocol handler initialized
<6>IR MCE Keyboard/mouse protocol handler initialized
<6>IR XMP protocol handler initialized
<6>sp805-wdt f8a2c000.watchdog: registration successful
<4>registered new interface driver himciV2.0_4.4.35_20170401
<6>usb 1-2: new high-speed USB device number 2 using ehci-platform
<6>usb 3-1: new high-speed USB device number 2 using xhci-hcd
<6>mmc0: MAN_BKOPS_EN bit is not set
<4>scan edges:2 p2f:6 f2p:1
<4>mix set temp-phase 3
<4>scan elemnts: startp:15 endp:136
<5>Tuning SampleClock. mix set phase:[04/07] ele:[07/17]
<6>mmc0: new HS400 MMC card at address 0001
<6>mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
<6>mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
<6>usb-storage 3-1:1.0: USB Mass Storage device detected
<6>scsi host0: usb-storage 3-1:1.0
<6>mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
<6> mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(bootoptions) p5(deviceinfo) p6(baseparam) p7(pqparam) p8(logo) p9(fastplay) p10(kernel) p11(trustedcore) p12(misc) p13(system) p14(vendor) p15(dvb) p16(cache) p17(private) p18(securestore) p19(linuxkernel1) p20(linuxkernel2) p21(linuxkernel3) p22(linuxkernel4) p23(userdata)
<5>f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
<5>f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>usbcore: registered new interface driver snd-usb-audio
<6>oprofile: using timer interrupt.
<6>Netfilter messages via NETLINK v0.30.
<6>nfnl_acct: registering with nfnetlink.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>NET: Registered protocol family 10
<6>NET: Registered protocol family 17
<5>Key type dns_resolver registered
<5>Registering SWP/SWPB emulation handler
<6>ALSA device list:
<6>  No soundcards found.
<6>Freeing unused kernel memory: 556K (c0a8d000 - c0b18000)
<4>This architecture does not have kernel memory protection.
<4>EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
<6>EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
<4>FAT-fs (mmcblk0p4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<5>scsi 0:0:0:0: Direct-Access     WD       2500BEV External 1.75 PQ: 0 ANSI: 4
<5>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
<3>sd 0:0:0:0: [sda] No Caching mode page found
<3>sd 0:0:0:0: [sda] Assuming drive cache: write through
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<5>random: nonblocking pool is initialized
<6>hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
<6>input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>input: rc mouse emulation as /devices/virtual/input/input2
<6>DVB: registering new adapter (dvb0)
<6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
<4>Mali: Mali device driver loaded
<4>tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
<4>Disabling lock debugging due to kernel taint
<6>Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].
<6>Built against headers 4.4.35_hi3798mv2x #1 SMP Tue Dec 12 14:16:24 CST 2017 arm
<6>Running on kernel 4.4.35 #1 SMP Tue Feb 18 23:44:49 UTC 2020 armv7l
<2>WARNING: Running kernel does not match configured kernel headers the driver was built with!  The driver needs to be rebuilt with the correct kernel headers!
<6>SGI XFS with ACLs, security attributes, realtime, no debug enabled
<6>EXT4-fs (mmcblk0p23): re-mounted. Opts: data=ordered
<4>r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
<6>Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_UNKNOWN_CUT(10)_1T1R_RomVer(0)
<6>usbcore: registered new interface driver r8188eu
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control off
<6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<4>UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<6>yaffs: dev is 187695105 name is "mmcblk0p1" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"
<7>yaffs: yaffs: MTD device 1 either not valid or unavailable
<6>yaffs: dev is 187695105 name is "mmcblk0p1" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"
<7>yaffs: yaffs: MTD device 1 either not valid or unavailable
<6>tntfs info (device mmcblk0p1, pid 2562): ntfs_fill_super(): fail_safe is enabled.
<4>UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<4>UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<6>yaffs: dev is 187695107 name is "mmcblk0p3" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3"
<7>yaffs: yaffs: MTD device 3 either not valid or unavailable
<6>yaffs: dev is 187695107 name is "mmcblk0p3" rw
<6>yaffs: passed flags ""
<7>yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3"
<7>yaffs: yaffs: MTD device 3 either not valid or unavailable
<6>tntfs info (device mmcblk0p3, pid 2601): ntfs_fill_super(): fail_safe is enabled.

Receiver stürzt ab, sobald dieser Knopf gedrückt wird.

Spoiler: Sreenshot

Du musst Regestriert sein, um das angehängte Bild zusehen.

 

[jack1.9]

Habe es den Devs weiter geleitet mal sehen was kommt und Danke für die Info .

Du könntest ggf mal testen das Image neu aufzusetzen also nicht das Alte updaten sondern die Einstellung speichern und dann mit flash on the fly das ganze Image neu einspielen nicht das es durch alte Infos im Update immer noch crashed ist aber nur ein Versuch

 

[Derek Buegel]

Ja kann ich morgen mal machen. Hab ja noch einen Slot frei.

 

[Derek Buegel]

PurE²7.3 vom 29.07.23 komplett sauer neu aufgesetzt. Deutsche Sprache bleibt erhalten.
Soweit gut.
Habe noch paar Probleme mit oscam_icam (läuft noch nicht sauber), das ist aber ne andere Sache.

Habe es hinbekommen. libcrypto.so.0.9.8 hat gefehlt.
Shellscript zum Lich an und ausschalten funkt jetzt auch.

( gelöst ) Sonoff/Tasmota mit E² möglich?

Hallo Ich suche eine Möglichkeit, eine Sonoff/Tasmota-Steckdose mit/über einen Receiver zu schalten. Der Schaltbefehl sieht zum einschalten so aus: http://192.168.178.45/cm?cmnd=Power%20On und zum ausschalten so:http://192.168.178.45/cm?cmnd=Power%20off Kann man sowas irgendwie bewerkstelligen...

www.digital-eliteboard.com

 

[Derek Buegel]

@jack1.9 Heute konnte ich wieder einen Absturz "provozieren".
Ich habe versucht, in Spracheinstellungen, die nicht benötgten Sprachen zu löschen (gelb - bereinigen) und dabei stürzt der Receiver ab.
Hier das Crashlog.

Spoiler

pure2 Enigma2 crash log

crashdate=Do Aug  3 19:03:13 2023
compiledate=Jul 29 2023
skin=Estuary/skin.xml
sourcedate=2023-07-29
branch=7.0
rev=32657+564da03
component=Enigma2

model=multiboxse
machinebuild=novaler4kse
imageversion=7.3
imagebuild=001

kernelcmdline=root=/dev/mmcblk0p23 rootsubdir=linuxrootfs2 rootfstype=ext4 kernel=/dev/mmcblk0p20 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),18M(recovery),2M(bootoptions),2M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo),40M(fastplay),20M(kernel),20M(trustedcore),4M(misc),1024M(system),150M(vendor),306M(dvb),256M(cache),50M(private),8M(securestore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),-(userdata) hbcomp=/dev/block/mmcblk0p13 mem=937M mmz=ddr,0,0,60M vmalloc=500M

nimsockets:
NIM Socket 0:
    Type: DVB-S2X
    Name: avl62x1
    Has_Outputs: no
    Frontend_Device: 0
    I2C_Device: 0
    Supports_Blind_Scan: yes
NIM Socket 1:
    Type: DVB-S2X
    Name: avl62x1
    Has_Outputs: no
    Frontend_Device: 1
    I2C_Device: 0
    Supports_Blind_Scan: yes



19:41:29.3776 [Enigma] Python path is '/usr/lib/enigma2/python'.
19:41:29.3778 [Enigma] DVB API version 5, DVB API version minor 11.
19:41:29.3778 [Enigma] Enigma debug level 3.
18:34:51.4417 [eServicePeer] REMOVE Peer bre2ze4k
18:34:51.4418 [eServicePeer] REMOVE Peer bre2ze4k
18:34:51.4418 [eServicePeer] REMOVE Peer novaler4kse
18:34:51.4419 [eServicePeer] REMOVE Peer novaler4kse
18:34:51.4421 [eServicePeer] REMOVE Peer novaler4kse
18:34:51.4458 [eServicePeer] ADD Peer bre2ze4k=bre2ze4k.local:8001
18:34:51.4468 [eServicePeer] ADD Peer bre2ze4k=bre2ze4k.local:8001
18:34:51.4503 [eServicePeer] ADD Peer bre2ze4k=bre2ze4k.local:8001
18:34:51.4509 [eServicePeer] ADD Peer bre2ze4k=bre2ze4k.local:8001
18:35:05.1534 [eDVBPESReader] Created. Opening demux
18:35:05.1535 [eDVBPESReader] Created. Opening demux
18:35:26.1995 [eDVBPESReader] Created. Opening demux
18:35:26.1996 [eDVBPESReader] Created. Opening demux
18:55:39.0469 [eServicePeer] REMOVE Peer bre2ze4k
18:55:39.0477 [eServicePeer] REMOVE Peer bre2ze4k
18:57:57.4397 Exception in thread Thread-2 (ExtraInfo):
18:57:57.4402 Traceback (most recent call last):
18:57:57.4404   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:57:57.4424   File "/usr/lib/python3.11/threading.py", line 975, in run
18:57:57.4429   File "plugin.py", line 678, in plugin.FNCRadioStation.ExtraInfo
18:57:57.4436 NameError: name '_playing_song' is not defined
18:58:00.3797 Exception in thread Thread-3 (ExtraInfo):
18:58:00.3799 Traceback (most recent call last):
18:58:00.3799   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:00.3808   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:00.3811   File "plugin.py", line 678, in plugin.FNCRadioStation.ExtraInfo
18:58:00.3815 NameError: name '_playing_song' is not defined
18:58:01.9724 Exception in thread Thread-4 (ExtraInfo):
18:58:01.9725 Traceback (most recent call last):
18:58:01.9726   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:01.9731   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:01.9743   File "plugin.py", line 678, in plugin.FNCRadioStation.ExtraInfo
18:58:01.9747 NameError: name '_playing_song' is not defined
18:58:02.2851 Exception in thread Thread-5 (ExtraInfo):
18:58:02.2854 Traceback (most recent call last):
18:58:02.2855   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:02.2861   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:02.2864   File "plugin.py", line 678, in plugin.FNCRadioStation.ExtraInfo
18:58:02.2868 NameError: name '_playing_song' is not defined
18:58:02.5617 Exception in thread Thread-6 (ExtraInfo):
18:58:02.5618 Traceback (most recent call last):
18:58:02.5619   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:02.5623   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:02.5627   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:58:02.5630   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:58:02.5634 AttributeError: 'LoadPic' object has no attribute 'picload'
18:58:03.5624 Exception in thread Thread-7 (ExtraInfo):
18:58:03.5630 Traceback (most recent call last):
18:58:03.5631   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:03.5657   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:03.5660   File "plugin.py", line 678, in plugin.FNCRadioStation.ExtraInfo
18:58:03.5664 NameError: name '_playing_song' is not defined
18:58:08.4160 Exception in thread Thread-8 (ExtraInfo):
18:58:08.4161 Traceback (most recent call last):
18:58:08.4162   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:08.4166   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:08.4171   File "plugin.py", line 678, in plugin.FNCRadioStation.ExtraInfo
18:58:08.4174 NameError: name '_playing_song' is not defined
18:58:46.2294 Exception in thread Thread-14 (ExtraInfo):
18:58:46.2295 Traceback (most recent call last):
18:58:46.2296   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:46.2299   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:46.2302   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:58:46.2337   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:58:46.2355 AttributeError: 'LoadPic' object has no attribute 'picload'
18:58:46.2945 Exception in thread Thread-12 (ExtraInfo):
18:58:46.2946 Traceback (most recent call last):
18:58:46.2946   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:46.2950   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:46.2953   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:58:46.2956   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:58:46.2958 AttributeError: 'LoadPic' object has no attribute 'picload'
18:58:54.8897 Exception in thread Thread-17 (ExtraInfo):
18:58:54.8899 Traceback (most recent call last):
18:58:54.8900   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:54.8914   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:54.8940   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:58:54.8944   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:58:54.8946 AttributeError: 'LoadPic' object has no attribute 'picload'
18:58:55.2070 Exception in thread Thread-19 (ExtraInfo):
18:58:55.2072 Traceback (most recent call last):
18:58:55.2072   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:55.2076   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:55.2079   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:58:55.2081   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:58:55.2084 AttributeError: 'LoadPic' object has no attribute 'picload'
18:58:59.0447 Exception in thread Thread-24 (ExtraInfo):
18:58:59.0448 Traceback (most recent call last):
18:58:59.0448   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:59.0452   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:59.0455   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:58:59.0458   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:58:59.0460 AttributeError: 'LoadPic' object has no attribute 'picload'
18:58:59.1735 Exception in thread Thread-22 (ExtraInfo):
18:58:59.1737 Traceback (most recent call last):
18:58:59.1737   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:58:59.1741   File "/usr/lib/python3.11/threading.py", line 975, in run
18:58:59.1744   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:58:59.1746   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:58:59.1749 AttributeError: 'LoadPic' object has no attribute 'picload'
18:59:10.4290 Exception in thread Thread-27 (ExtraInfo):
18:59:10.4291 Traceback (most recent call last):
18:59:10.4291   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:59:10.4295   File "/usr/lib/python3.11/threading.py", line 975, in run
18:59:10.4298   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:59:10.4301   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:59:10.4313 AttributeError: 'LoadPic' object has no attribute 'picload'
18:59:10.9471 Exception in thread Thread-30 (ExtraInfo):
18:59:10.9472 Traceback (most recent call last):
18:59:10.9473   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:59:10.9476   File "/usr/lib/python3.11/threading.py", line 975, in run
18:59:10.9479   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:59:10.9482   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:59:10.9484 AttributeError: 'LoadPic' object has no attribute 'picload'
18:59:11.1412 Exception in thread Thread-28 (ExtraInfo):
18:59:11.1414 Traceback (most recent call last):
18:59:11.1414   File "/usr/lib/python3.11/threading.py", line 1038, in _bootstrap_inner
18:59:11.1418   File "/usr/lib/python3.11/threading.py", line 975, in run
18:59:11.1420   File "plugin.py", line 675, in plugin.FNCRadioStation.ExtraInfo
18:59:11.1423   File "plugin.py", line 1103, in plugin.LoadPic.destroy
18:59:11.1426 AttributeError: 'LoadPic' object has no attribute 'picload'
18:59:29.4763 [eDVBPESReader] Created. Opening demux
18:59:29.4764 [eDVBPESReader] Created. Opening demux
19:02:43.7922 [eDVBRecordFileThread] poll failed: -1
19:02:43.7923 [eDVBRecordStreamThread] asyncWrite returns -1

19:02:52.4561 Traceback (most recent call last):
19:02:52.4562   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 305, in action
19:02:52.4566   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 276, in action
19:02:52.4568   File "FNCStyle.py", line 473, in FNCStyle.IconWall_4x3.okbuttonClick
19:02:52.4572   File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 10, in __call__
19:02:52.4574   File "/usr/lib/enigma2/python/Screens/Menu.py", line 584, in openSetup
19:02:52.4595     self.session.openWithCallback(self.menuClosed, Setup, dialog)
19:02:52.4598   File "/usr/lib/enigma2/python/pure2startup.py", line 161, in openWithCallback
19:02:52.4605     dialog = self.open(screen, *arguments, **kwargs)
19:02:52.4609              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:02:52.4611   File "/usr/lib/enigma2/python/pure2startup.py", line 172, in open
19:02:52.4616     dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
19:02:52.4622                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:02:52.4622   File "/usr/lib/enigma2/python/pure2startup.py", line 111, in instantiateDialog
19:02:52.4626     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
19:02:52.4632            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:02:52.4632   File "/usr/lib/enigma2/python/pure2startup.py", line 133, in doInstantiateDialog
19:02:52.4637     dialog = screen(self, *arguments, **kwargs)  # Create dialog.
19:02:52.4642              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:02:52.4642   File "/usr/lib/enigma2/python/Screens/Setup.py", line 76, in __init__
19:02:52.4646   File "/usr/lib/enigma2/python/Screens/Setup.py", line 109, in createSetup
19:02:52.4649   File "/usr/lib/enigma2/python/Screens/Setup.py", line 138, in addItems
19:02:52.4651   File "/usr/lib/enigma2/python/Screens/Setup.py", line 154, in addItem
19:02:52.4654   File "<string>", line 1, in <module>
19:02:52.4654   File "/usr/lib/enigma2/python/Components/config.py", line 2101, in __getattr__
19:02:52.4658 AttributeError: lcd_powerled
19:02:52.4659 [ePyObject] (PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xad9caa90>>,('OkCancelActions', 'ok')) failed)
19:03:02.4827 Traceback (most recent call last):
19:03:02.4828   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 305, in action
19:03:02.4832   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 276, in action
19:03:02.4835   File "FNCStyle.py", line 473, in FNCStyle.IconWall_4x3.okbuttonClick
19:03:02.4837   File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 10, in __call__
19:03:02.4840   File "/usr/lib/enigma2/python/Screens/Menu.py", line 584, in openSetup
19:03:02.4858     self.session.openWithCallback(self.menuClosed, Setup, dialog)
19:03:02.4861   File "/usr/lib/enigma2/python/pure2startup.py", line 161, in openWithCallback
19:03:02.4866     dialog = self.open(screen, *arguments, **kwargs)
19:03:02.4870              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:03:02.4871   File "/usr/lib/enigma2/python/pure2startup.py", line 172, in open
19:03:02.4875     dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
19:03:02.4881                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:03:02.4881   File "/usr/lib/enigma2/python/pure2startup.py", line 111, in instantiateDialog
19:03:02.4885     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
19:03:02.4890            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:03:02.4890   File "/usr/lib/enigma2/python/pure2startup.py", line 133, in doInstantiateDialog
19:03:02.4894     dialog = screen(self, *arguments, **kwargs)  # Create dialog.
19:03:02.4898              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:03:02.4898   File "/usr/lib/enigma2/python/Screens/Setup.py", line 76, in __init__
19:03:02.4903   File "/usr/lib/enigma2/python/Screens/Setup.py", line 109, in createSetup
19:03:02.4907   File "/usr/lib/enigma2/python/Screens/Setup.py", line 138, in addItems
19:03:02.4909   File "/usr/lib/enigma2/python/Screens/Setup.py", line 154, in addItem
19:03:02.4912   File "<string>", line 1, in <module>
19:03:02.4912   File "/usr/lib/enigma2/python/Components/config.py", line 2101, in __getattr__
19:03:02.4916 AttributeError: lcd_powerled
19:03:02.4916 [ePyObject] (PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xad9caa90>>,('OkCancelActions', 'ok')) failed)
19:03:03.4955 Traceback (most recent call last):
19:03:03.4956   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 5293, in checkBsodCallback
19:03:03.4961   File "/usr/lib/enigma2/python/pure2startup.py", line 161, in openWithCallback
19:03:03.4968     dialog = self.open(screen, *arguments, **kwargs)
19:03:03.4973              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:03:03.4974   File "/usr/lib/enigma2/python/pure2startup.py", line 168, in open
19:03:03.4981     raise RuntimeError("[pure2startup] Error: Modal open are allowed only from a screen which is modal!")  # ...unless it's the very first screen.
19:03:03.4987     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:03:03.4988 RuntimeError: [pure2startup] Error: Modal open are allowed only from a screen which is modal!
19:03:03.4990 [ePyObject] (PyObject_CallObject(<bound method InfoBarHandleBsod.checkBsodCallback of <class 'Screens.InfoBar.InfoBar'>>,()) failed)
19:03:13.5204 Traceback (most recent call last):
19:03:13.5205   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 5293, in checkBsodCallback
19:03:13.5208   File "/usr/lib/enigma2/python/pure2startup.py", line 161, in openWithCallback
19:03:13.5214     dialog = self.open(screen, *arguments, **kwargs)
19:03:13.5218              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:03:13.5219   File "/usr/lib/enigma2/python/pure2startup.py", line 168, in open
19:03:13.5224     raise RuntimeError("[pure2startup] Error: Modal open are allowed only from a screen which is modal!")  # ...unless it's the very first screen.
19:03:13.5230     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
19:03:13.5231 RuntimeError: [pure2startup] Error: Modal open are allowed only from a screen which is modal!
19:03:13.5231 [ePyObject] (PyObject_CallObject(<bound method InfoBarHandleBsod.checkBsodCallback of <class 'Screens.InfoBar.InfoBar'>>,()) failed)


dmesg

Ist aber von der Sache kein Problem, die deutsche Sprache bleibt erhalten.