2 Identische Server, einer Logt die Emms nicht....

[schorsch244]

Hallo Freunde,
habe 2 identische Pi's am laufen.
Einer logt brav mit der andere macht leider nichts. Die selben user greifen auf beide zu... wirklich alles gleich. Hab auch schon die Konfigs vom einen auf den anderen Kopiert, ohne änderung.
Jetzt bin ich ratlos....

OScam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
clientmaxidle = 160
nice = -1
maxlogsize = 2048
cwlogdir = /var/log/oscam/cwlog/
emmlogdir = /var/log/oscam/
ecmfmt = c/s/1



[cccam]
port = xxxx
nodeid = B3DD61FB104E157E
version = 2.0.11

[webif]
httpport = xxxx
httpuser = xxxx
httppwd = xxxx
httphelplang = de
httppollrefresh = 10
httpshowmeminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.1,10.10.10.10-255.168.255.254
http_status_log = 1

Oscam.usr

Spoiler

[account]
user = xxxx
pwd = xxxx
caid = 098C
au = 1
group = 1

Oscam.server

Spoiler

[reader]
label = sky
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
#ecmwhitelist = 098C:52,57,64,6A,9B,9C,A0,A1,91,96,97,98,9D
detect = cd
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-g = 1
blockemm-bylen = 0-38,40,42-44,65-124,126-127,139-255
auprovid = 000001
ndsversion = 2

Rechte habe ich auf beiden 0777

Was noch aufgefallen ist, Pi1 der geht, schreibt auch "Successfully added EMM to /var/log/oscam/skyBL_global_emm.log" der andere nicht.
Pi2 zeigt nicht mal an das was rein kommt.... Im Webif bei reader/emms in der Blocked Spalte steht nur 0/0/0/0

Edit: Pi1 = V14-mit F0-012000003-Fuse 05 -> Karte empfängt Emms
Pi2 = V14-mit F0-012000003-Fuse 25 -> Keine Emms

 

[dj alex z]

AW: 2 Identische Server, einer Logt die Emms nicht....

Hallo,

stelle mal bitte ein Log in Spoiler vom Start des OScam auf dem Problemserver zur Verfügung.

Wieso hast du eigentlich zwei identische Server am laufen?
Wieso nicht ein Server mit zwei Cardreadern und der andere PI dann als Notefalllösung falls der erste defekt ist.

Bitte stelle auch mal die Configs des AU Users rein.

 

[schorsch244]

AW: 2 Identische Server, einer Logt die Emms nicht....

Den Log kann ich dir erst heute Abend posten.
Hab die Karte mal in den loggenden Pi geschoben. Hier kommen auch gar keine Emm's rein. Nach 30 min wieder die ursprüngliche karte rein geschoben und es kommen direkt wieder Globals.

(2 Server, da der eine an einem anderen Ort steht und als ausfall sicherung dient. Haben bei uns öffter mal Strom ausfälle bzw. schwankungen)

 

[dj alex z]

AW: 2 Identische Server, einer Logt die Emms nicht....

Schick mir mal die Cardserial von der "keine-EMMs-Karte" per PN

Edit:

Also die "Problem-Karte" bekommt Unique EMMs wie es sein muss.

Dann bitte heute Abend die Logs.

 

[schorsch244]

AW: 2 Identische Server, einer Logt die Emms nicht....

Ich hab mal den Kartenstart im funktionierenden Pi mit der nicht loggenden KArte dabei.
Wie gesagt die Pi's sind identisch...

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Jun 7 12:51:43 2016
-------------------------------------------------------------------------------
2016/06/07 12:51:43 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (arm-linux-gnueabihf)
2016/06/07 12:51:43 00000000 s (main) System name = Linux
2016/06/07 12:51:43 00000000 s (main) Host name = raspberrypi
2016/06/07 12:51:43 00000000 s (main) Release = 3.18.11+
2016/06/07 12:51:43 00000000 s (main) Version = #781 PREEMPT Tue Apr 21 18:02:18 BST 2015
2016/06/07 12:51:43 00000000 s (main) Machine = armv6l
2016/06/07 12:51:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 7241
2016/06/07 12:51:43 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2016/06/07 12:51:43 00000000 s (config) userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2016/06/07 12:51:43 00000000 s (main) signal handling initialized
2016/06/07 12:51:43 00000000 s (config) 994 provid's loaded
2016/06/07 12:51:43 00000000 s (config) 135 service-id's loaded in 2 ms
2016/06/07 12:51:43 00000000 s (net) newcamd: initialized (fd=5, port=xxx)
2016/06/07 12:51:43 00000000 s (net) -> CAID: 098C PROVID: 000000
2016/06/07 12:51:43 00000000 s (net) cccam: initialized (fd=6, port=xxx)
2016/06/07 12:51:43 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/06/07 12:51:43 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/06/07 12:51:43 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2016/06/07 12:51:43 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/06/07 12:51:43 00000000 s (reader) skyBL [mouse] creating thread for device /dev/ttyUSB0
2016/06/07 12:51:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/06/07 12:51:43 00000000 s (main) waiting for local card init
2016/06/07 12:51:43 19B9F6A0 h (webif) webif: decompressed 155065 bytes back into 370520 bytes
2016/06/07 12:51:43 19B9F6A0 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Buffers readed 0 bytes total time_us 75232
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 1 value 03 time_us 5604
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 2 value 40 time_us 2575
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 3 value 57 time_us 34236
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 4 value 5b time_us 72
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 5 value bf time_us 2422
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 6 value f5 time_us 1249
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 7 value fe time_us 1136
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 8 value 0f time_us 1221
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 9 value 7d time_us 2584
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 10 value f2 time_us 1244
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 11 value af time_us 1231
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 12 value 69 time_us 1235
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 13 value 00 time_us 1244
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 14 value ad time_us 2564
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 15 value f5 time_us 1256
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 16 value f0 time_us 1225
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 17 value ff time_us 1231
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 18 value ff time_us 2589
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 19 value f5 time_us 110
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 20 value 73 time_us 2342
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 21 value 3f time_us 1257
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Buffers readed 21 bytes total time_us 147214
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2016/06/07 12:51:44 07CE9A84 r (reader) skyBL [mouse] card detected
2016/06/07 12:51:44 07CE9A84 r (reader) skyBL [mouse] Buffers readed 0 bytes total time_us 75224
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] ATR: xxxxxxxx
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] Setting baudrate to 153600 bps
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] Buffers readed 0 bytes total time_us 75290
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Card type: P1TV
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Rom version: 20AA
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Credit available on card: 0 euro
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Extended 4C detected
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] FuseByte: 25
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Region Code: 00BO0102
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Country Code: DEU
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Pincode read: 2658
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] PCB settings: FF FF FF FF
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] serial: ########, BoxID: ########, baseyear: 2004
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] ready for requests
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] found card system videoguard2

Hoffe du siehst etwas was nicht passt...

 

[dj alex z]

AW: 2 Identische Server, einer Logt die Emms nicht....

Bitte noch mehr vom Log (wo sich der AU Client verbindet)

 

[dodo83]

AW: 2 Identische Server, einer Logt die Emms nicht....

das raus

[COLOR=#333333]#ecmwhitelist = 098C:52,57,64,6A,9B,9C,A0,A1,91,96,97,98,9D[/COLOR]
[COLOR=#333333]blockemm-bylen = 0-38,40,42-44,65-124,126-127,139-255[/COLOR]
[COLOR=#333333]auprovid = 000001[/COLOR]

die NODEID ist auch gleich auf beiden?

der Client läuft auch mit OScam?
wenn der auf beide Server zugreift ... müsste dort Loadbalancing aktiviert sein...
poste mal die Client Configs bitte auch

 

[schorsch244]

AW: 2 Identische Server, einer Logt die Emms nicht....

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Jun 7 12:51:43 2016
-------------------------------------------------------------------------------
2016/06/07 12:51:43 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (arm-linux-gnueabihf)
2016/06/07 12:51:43 00000000 s (main) System name = Linux
2016/06/07 12:51:43 00000000 s (main) Host name = raspberrypi
2016/06/07 12:51:43 00000000 s (main) Release = 3.18.11+
2016/06/07 12:51:43 00000000 s (main) Version = #781 PREEMPT Tue Apr 21 18:02:18 BST 2015
2016/06/07 12:51:43 00000000 s (main) Machine = armv6l
2016/06/07 12:51:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 7241
2016/06/07 12:51:43 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2016/06/07 12:51:43 00000000 s (config) userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2016/06/07 12:51:43 00000000 s (main) signal handling initialized
2016/06/07 12:51:43 00000000 s (config) 994 provid's loaded
2016/06/07 12:51:43 00000000 s (config) 135 service-id's loaded in 2 ms
2016/06/07 12:51:43 00000000 s (net) newcamd: initialized (fd=5, port=xxx)
2016/06/07 12:51:43 00000000 s (net) -> CAID: 098C PROVID: 000000
2016/06/07 12:51:43 00000000 s (net) cccam: initialized (fd=6, port=xxx)
2016/06/07 12:51:43 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/06/07 12:51:43 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/06/07 12:51:43 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2016/06/07 12:51:43 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/06/07 12:51:43 00000000 s (reader) skyBL [mouse] creating thread for device /dev/ttyUSB0
2016/06/07 12:51:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/06/07 12:51:43 00000000 s (main) waiting for local card init
2016/06/07 12:51:43 19B9F6A0 h (webif) webif: decompressed 155065 bytes back into 370520 bytes
2016/06/07 12:51:43 19B9F6A0 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Buffers readed 0 bytes total time_us 75232
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 1 value 03 time_us 5604
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 2 value 40 time_us 2575
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 3 value 57 time_us 34236
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 4 value 5b time_us 72
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 5 value bf time_us 2422
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 6 value f5 time_us 1249
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 7 value fe time_us 1136
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 8 value 0f time_us 1221
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 9 value 7d time_us 2584
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 10 value f2 time_us 1244
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 11 value af time_us 1231
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 12 value 69 time_us 1235
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 13 value 00 time_us 1244
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 14 value ad time_us 2564
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 15 value f5 time_us 1256
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 16 value f0 time_us 1225
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 17 value ff time_us 1231
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 18 value ff time_us 2589
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 19 value f5 time_us 110
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 20 value 73 time_us 2342
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Flush readed byte Nr 21 value 3f time_us 1257
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Buffers readed 21 bytes total time_us 147214
2016/06/07 12:51:43 07CE9A84 r (reader) skyBL [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2016/06/07 12:51:44 07CE9A84 r (reader) skyBL [mouse] card detected
2016/06/07 12:51:44 07CE9A84 r (reader) skyBL [mouse] Buffers readed 0 bytes total time_us 75224
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] ATR: xxxxx
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] Setting baudrate to 153600 bps
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] Buffers readed 0 bytes total time_us 75290
2016/06/07 12:51:45 07CE9A84 r (reader) skyBL [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Card type: P1TV
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Rom version: 20AA
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Credit available on card: 0 euro
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Extended 4C detected
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] FuseByte: 25
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Region Code: 00BO0102
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Country Code: DEU
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] Pincode read: 2658
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] PCB settings: FF FF FF FF
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] serial: ########, BoxID: ########, baseyear: 2004
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] ready for requests
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [mouse] found card system videoguard2
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] card detected
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] ------------------------------------------------------------------
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] +---------+----------+---------------------+---------------------+
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 0058 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 0056 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 0057 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 007b --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 007d --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 008e --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00c0 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00c8 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00c9 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00ca --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00c7 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00e5 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00f0 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00fa --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00f3 --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] |-- 00 ---|-- 00ff --| 2016/07/11-01:00:00 |
2016/06/07 12:51:46 07CE9A84 r (reader) skyBL [videoguard2] ------------------------------------------------------from-ins70--
2016/06/07 12:51:47 00000000 s (main) init for all local cards done
2016/06/07 12:51:47 00000000 s (emmcache) loaded 1 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
2016/06/07 12:51:47 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
2016/06/07 12:51:47 00000000 s (anticasc) anti cascading disabled
2016/06/07 12:51:47 4D34BE62 c (client) anonymous disconnected from xxx
2016/06/07 12:51:47 071746E9 c (client) encrypted cccam-client xxx granted (u1, au=auto (1 reader))
2016/06/07 12:51:48 3E56C5D5 c (client) encrypted cccam-client xxx granted (u2, au=auto (1 reader))
2016/06/07 12:51:49 0256B42C c (client) encrypted cccam-client xxx granted (u3, au=auto (1 reader))
2016/06/07 12:51:51 07CE9A84 r (reader) skyBL [videoguard2] classD3 ins54: no cw --> Card appears in error
2016/06/07 12:51:51 07CE9A84 r (reader) skyBL [videoguard2] classD3 ins54: no cw --> Tier expired
2016/06/07 12:51:51 0256B42C c (ecm) schorsch (098C/000B/1): not found (71 ms) by skyBL - Cinema +1
2016/06/07 12:51:53 07CE9A84 r (reader) skyBL [videoguard2] classD3 ins54: no cw --> Card appears in error
2016/06/07 12:51:53 07CE9A84 r (reader) skyBL [videoguard2] classD3 ins54: no cw --> Tier expired
2016/06/07 12:51:53 0256B42C c (ecm) schorsch (098C/000B/1): not found (54 ms) by skyBL - Cinema +1

@ Dodo
die NODEID ist auch gleich auf beiden!
Code hab ich raus genommen, aber keine änderung

Die client Configs habe ich jetzt micht zu hand. (Clients sind 5x Edision Receiver mit ILTV software via cccam und 2 E2 via Oscam via cccam)

 

[Pilot]

AW: 2 Identische Server, einer Logt die Emms nicht....

Spoiler

Code hab ich raus genommen, aber keine änderung

Spoiler

Oscam neu gestartet nach der Änderung?

 

[dodo83]

AW: 2 Identische Server, einer Logt die Emms nicht....

wer soll die Karten aber Updaten?
die Edis mit ILTV können keine EMM Senden.... da keine Linux ...
lösche mal die NODEID auf beiden und starte neu

 

[schorsch244]

AW: 2 Identische Server, einer Logt die Emms nicht....

Hab alles mal so geändert, leider immer noch kein log.

Wie gesagt, wenn ich die Karte tausche bekomme ich emm's rein! nach 10 sekunden sind die ersten globals da.

Es geht nur bei dieser Karte nicht. Die Edis scheinbar schon, habe auch immer Verlängerer bekommen ect. Nur geht das seid kurzem nicht mehr die letzten emm habe ich am 02.6. bekomme (Global) die letzten uniq am 28.05

 

[Pilot]

AW: 2 Identische Server, einer Logt die Emms nicht....

Die Edis scheinbar schon, habe auch immer Verlängerer bekommen ect.

Aber nur wenn du Edision Receiver hast , die auf Linux Basis arbeiten.
Dies Edision Receiver liefern EMMs: https://www.digital-eliteboard.com/1888-edision-linuxreceiver/
Diese Edision Receiver liefern keine EMMs. auch wenn man das im Menü so einstellen kann: https://www.digital-eliteboard.com/1892-edision-hd-receiver/

 

[schorsch244]

AW: 2 Identische Server, einer Logt die Emms nicht....

Guten Morgen,
also habe Gestern Abend sind wieder Emm's rein gekommen, ohne das ich weiter etwas umgestellt habe. Die Karte die ging, hat auch im anderen Pi direkt Emm's bekommen. Unerklärlich....

Mit den Clients und den Emm's, werde ich mal am Wochenende testen.