Configs für meine Server Fritzbox plus Configs für meinen pingulux

Pilot · 21. Januar 2011

Als Anleitung für die Edision User, die sich eine Fritzbox als Server eirichten möchten, stelle ich hier mal Configs für newcs, oscam und cccam rein.
1. Newcs:
liest die Karte. Daher Haken am USB Comport und auf FTDI_SIO Modul wählen
Cardreader: Apolloreader, Karte : S02 Karte

<newCSconfig>
<readers>name="Phoenix">
<device>
<name>Apollo</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>/dev/ttyUSB0</node>
<parity>even</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>

<crypto-special>yes</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>

<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>

<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>25550</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>200</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8081</port>
<enabled>yes</enabled>
</server>
<user>
<name>user</name>
<password>user</password>
<accesslevel>admin</accesslevel> </user>
</httpd> <debug> <password>newcs</password>
<level>normal</level> <type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options> </debug>
<newcamdserver> <enabled>Yes</enabled>
<name>newcs</name> <deskey>01 02 03 04 05 06 07 08 09
10 11 12 13 14</deskey>
<user><name>dummy</name><password>dummy</password><hostname></hostname><port></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rate>0</rate></user>
<user><name>wohn</name><password>zimmer</password><hostname></hostname><port></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rate>0</rate></user>
<user><name>newcs</name><password>newcs</password><hostname></hostname><port></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rate>0</rate></user>
</user>
<user><name>oscam</name><password>oscam</password><hostname></hostname><port></port><au>yes</au><spider>no</spider><sidoverride>no</sidoverride><rate>0</rate></user>
</newcamdserver>
</newCSconfig>

key = 0102030405060708091011121314 Deskey für die N-Line
<newcamd_port>25551</newcamd_port> = Port zum sharen
<port>8081</port> = Port zum öfnen der Newcs Managment Cosole
192.168.178.50:8081(natürlich Eure IP der Server Fritzbox eintragen)
<name>user</name> Benutzname zum Eintritt in die Newcs Managment Console
<password>user</password> Passwort für Necs Managment Console
<user><name>newcs</name><password>newcs</password>
newcs-newcs user und Passwort für die N-Line in der cccam.cfg:
N: 192.168.178.50 25550 newcs newcs 01020304050600708091011121314(natürlich die IP eurer Server Fritzbox eintragen)
<user><name>dummy</name><password>dummy</password>
dummy-dummy user und Passwort für die N-Line für den VIP1, um EMMs vom VIP1 zu bekommen:
N:192.168.178.50 25550 dummy dummy 01020304050600708091011121314(natürlich die IP eurer Server Fritzbox eintragen)
<user><name>wohn</name><password>zimmer</password>
wohn zimmer user und Passwort für die N-Line für den VIP2, um EMMs vom VIP2 zu bekommen:
N:192.168.178.50 25550 wohn zimmer 01020304050600708091011121314(natürlich die IP eurer Server Fritzbox eintragen)
<user><name>oscam</name><password>oscam</password>
oscam-oscam user und Passwort für einen Reader in oscam, um die S02 Karte in oscam zu mappen. Damit werden auch die HD Kanäle von Sky hell. Das kann newcs bei einer S02 Karte nicht. Bei Verwendung einer V13 Karte werden auch die Sky HD Kanäle hell bei Verwndung der N-Lines im , die ich für VIP1 und VIP2 geschrieben hab.

2. cccam.cfg
cccam liest hier nicht die Karte. cccam bekommt die Karte über newcs. Daher kein Haken setzen beim USB Comport cccam

#SERIAL READER: /dev/ttyUSB0 phoenix
#SERIAL READER: /dev/ttyUSB0 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 96000000

N: 192.168.178.50 35000 oscam1 oscam1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 192.168.178.50 25550 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

F: vip1 cccam1 2 1 1 { 0:0:2,09c4:000000 }
F: vip2 cccam2 2 0 1 { 0:0:2,09c4:000000 }
F: miniip1 cccam3 2 0 1 { 0:0:2,09c4:000000 }
F: miniip2 cccam4 2 0 1 { 0:0:2,09c4:000000 }

SERVER LISTEN PORT : 42451

WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam

WEBINFO LISTEN PORT : 16888

Show TIMING : yes
LOG WARNINGS : /tmp/warnings.txt
SHOW EXTENEDED CLIENT INFO : yes

MINIMUM DOWNHOPS: 1

SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key

AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key

STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw

CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio

PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers

CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo

N: 192.168.178.50 25550 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 N-Line aus newcs für die S02 Karte
192.16.178.50 oscam1 35000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 N-Line aus oscam für die HD+ Karte

SERVER LISTEN PORT : 42451 Port zum sharen
WEBINFO LISTEN PORT : 16888 Port für das Webinterface(WI) von cccam:
192.168.178.50:16888. hier wieder die IP eurer Server Fritzbox eintragen
WEBINFO USERNAME : cccam Benutzername für das WI
WEBINFO PASSWORD : cccam Passwort für das WI

F: vip1 cccam1 2 1 1 { 0:0:2,09c4:000000 } F-Line für den VIP1. Daraus die C-Line: C: 192.168.178.50 42451 vip1 cccam1
F: vip2 cccam2 2 0 1 { 0:0:2,09c4:000000 } F-Line für den VIP2. Daraus die C-Line: C: 192.168.178.50 42451 vip2 cccam2
F: miniip1 cccam3 2 0 1 { 0:0:2,09c4:000000 } F-Line für den Mini IP1. Daraus die C-Line: C: 192.168.178.50 42451 miniip1 cccam3
F: miniip2 cccam4 2 0 1 { 0:0:2,09c4:000000 } F-Line für den Mini IP2. Daraus die C-Line: C: 192.168.178.50 42451 miniip2 cccam4
F: miniip3 cccam5 2 0 1 { 0:0:2,09c4:000000 } F-Line für den Mini IP2. Daraus die C-Line: C: 192.168.178.50 42451 miniip3 cccam4

Bei den IPs der C-Lines natürlich die IPs eurer Server Fritzbox eintragen

3. oscam
oscam liest Karten. Hier eine HD+ Karte und eine freextv Karte. Daher am oscam Comport wieder den Haken setzen und auf FTDI_SIO Modul schalten.
Kartenleser: 2 Apolloreader
3.1 oscam.config

# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #3571
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
usrfile = (null)
logfile = /var/log/oscam.log
cwlogdir = (null)
disablelog = 1
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
failbantime = 0
cachedelay = 200
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 0
lb_save = 100
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0

[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 1

[newcamd]
port = 35000@1830:000000,003411,008011;35001@1833:000000;35002@1702:000000;35003@0500:041700
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.255
keepalive = 1
mgclient = 0

[cccam]
port = 42451
reshare = 0
ignorereshare = 0
version = 2.0.11
updateinterval = 240
minimizecards = 0

[webif]
httpport = xx
httpcss = /var/media/ftp/uStor01/cs/oscam//hexer_ddcstyle.css
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0

[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 10
penalty = 0
aclogfile = ./oscam_ac.log
denysamples = 8
fakedelay = 1000

httpport = xx Port für das Webinterface(WI) von oscam:
192.168.178.50:xx Hier wieder die IP eurer Server Fritzbox eintragen

[newcamd]
port = 35000@1830:000000,003411,008011;35001@1833:000000;35002@1702:000000;35003@0500:041700
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.255
keepalive = 1
mgclient = 0

35000= Port zum sharen für die HD Plus Karte -fü die N-Line für die cccam.cfg und Newcamd Clienten
35001= Port zum sharen der S02 Karte für Newcamd Clienten SD+HD Kanäle werden hell
35002= port zum sharen der S02 Karte für Newcamd Clienten . Es weden nur die SD Kanäle hell.
Mit Port 35001 oder 35002kann man entscheiden wer nur die SD kanäle hell bekommt und wer SD+ HD Kanäle hell bekommt.
35003= Port für freex tv Karte für die N-Line zur cccam.cfg und Newcamd Clienten

3.2 oscam.server
hier werden die Kartenleser(cardreader) konfiguriert. Jeder Reader sollte durch eine feste group Nummer festgelegt werden.

# oscam.server generated automatically by Streamboard OSCAM 1.00-svn build #3571
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB1
services = hdplus
caid = 1830
rsakey = BF............................DD5
boxkey = A7......................D37C
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100

[reader]
label = sky
enable = 1
protocol = newcamd
device = 192.168.178.50,25550
key = 0102030405060708091011121314
account = oscam
password = oscam
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd
reconnecttimeout = 30
caid = 1702,1833
ident = 0000:000000
group = 2
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100

[reader]
label = freex
enable = 1
protocol = mouse
device = /dev/ttyUSB2
services = freex
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:FFF830,041700,041710
group = 3
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100
deprecated = 1

Reader1 ist für die HD+ Karte konfiguriert. rsakey und boxkey mußte ich unkenntlich machen.
Reader2 ist ein sogenannter proxy Reader. Das heist er liest die Karten nicht selbst. Somdern erhällt die Karten daten hier von newcs:
protocol = newcamd newcamd, weil newcs die Karte liest
device = 192.168.178.50,25550
192.168.178.50 hier die IP eurer Server Fritzbox eintragen
25550= share Port aus newcs
account = oscam in newcs eingetragener Usernamer
password = oscam in newcs eingetragenes Passwort
key = 0102030405060708091011121314 Deskey für die N-Line

Reader3 ist für die freextv Karte konfiguriert.

3.3 oscam.servies
Hier sind die Caids der Sender eingetragen, die man hell haben will. Bei mir sind auch Caids enthalten, die für den Argus Classic sind. Dieser fordert andere Caids ab, als alle anderen Receiver. Ohne diese Caids wird nichts hell. Im Oscam.services müssen die Caids von neuen Sender neu eingetragen werden.
Meine Quelle dafür ist hier:
https://www.digital-eliteboard.com/f886/oscam-services-oscam-services-70969/
und das Wi von oscam. Da lese ich die abgeforderten caids ab und trage direkt im WI von oscam bei Services ein. Schon kurz nach dem Eintragen und speichern, wird der Sender hell.

# oscam.services generated automatically by Streamboard OSCAM 1.00-svn build #3571
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[skymce]
caid = 1702,1833
provid = 000000
srvid = 0096,0097,0098,0099,009A,009B,009C,1750,1752,1754,1756,1758,175A,175C,1850,1852,1854,1856,1858,185A,185C

[skybuli]
caid = 1702,1833
provid = 000000
srvid = 180C,170C,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,00FC

[skysport]
caid = 1702,1833
provid = 000000
srvid = 0011,00DD,00DE,00FD,014D,0143,0139,012F,0125,011B,0107,0111,016B,0175,0035,176A,178E,0154,0158,186A,188E,186A,176A,178C,18E2,18BE,18BA,186A,118C,186A,188C,188E

[skyextra]
caid = 1702,1833
provid = 000000
srvid = 3393,003E,3398,0042,3394,0043,3331,3395,0044,4462,003C,7009,700A,003F,3397,17E0,0148,17D6,17D2,17D0,17C6,17D4,0157,17C4,184E,17DC,003D,4461,700A,6FF1,3395,0016,18E0,0148,18D6,18D2,18D0,18C6,18D4,0157,18C4,184E,18DC,003D,4461,700A,6FF1,3395,0016,001B,01AC,1859,01BA,01BB,01B9,1859,6FF1,044D,18DE,18D8,0781,18DA

[skyfilm]
caid = 1702,1833
provid = 000000
srvid = 000A,000B,002B,0009,0029,0014,0204,0203,0019,0008,1742,1744,1746,1748,171C,1718,174C,1728,17AC,174E,1842,1844,1848,181C,1818,184C,1828,18AC,184E,1846,18C0,18C2

[skywelt]
caid = 1702,1833
provid = 000000
srvid = 002A,0015,0018,000E,0022,001C,0010,0013,00A8,000D,000C,001D,001A,001B,0024,0034,0032,0017,174A,171E,1740,1782,1772,175E,179C,17A0,1720,1722,1766,1768,176C,1764,176E,1770,1700,177E,1760,1762,0206,184A,181E,1840,1882,1872,185E,189C,18A0,1820,1822,1866,1868,186C,1864,186E,1870,1800,187E,1860,1862,0206,18A6

[skyhd]
caid = 1702,1833
provid = 000000
srvid = 0081,0082,0083,0084,18B6,18BC,18B4,18B8,18BA,18B2,18B0,18B6,18C0,18C2,18C2,18BE,18BA,1807,1801,1809,180B,1805,1707,1701,1707,170B,1705,006A,006B,0071,0070,0072,006F,18B6,18BA,189A,1803,18B6,18B4,189A

[hdplus]
caid = 1830
provid = 003411,000000,008011
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,277E,1ACC,1ACE,1AEE,1AEA,1AEC,1AAE,EF14,1AAA,1AA4

[blue+movie]
caid = 1702,1833
provid = 000000
srvid = 18F2,18F6,18FA,1826

[freex]
caid = 0500
provid = 041700
srvid = 378C,3786,378D,378E,378A,008C,3788,43B5,1D90,1D91,1D8F,1D92,1210,1272,1273,1274,1275,1275,227B

[orf]
caid = D050,0D95
provid = 000053
srvid = 329C,32CA,32CB,32CC,32CD,32DE,32DF,32D1,32D2,32D3,32D4,132F,1330

[austria_sat]
caid = 0D05,0D95
provid = 000060
srvid = 4461,4462,003E,07FE,0046,2EEE,6FF3,6FEE,6FFF,6FF0,0045,07FD,07FA,1FE4,17D6,17D5,17D5,17D8,0450,1FC6,1FC4,1FD4,0BC3,0BC4,1EF2,18E4

3.4. oscam.srvid
Dieser Bereich wird benötigt, damit im WI von oscam nicht nur der Caid des Senders angezeigt wird. Sondern der ganze Sendermame und der Provider. Auch dieser Bereich muß bei neuen Sendern angepasst werden.

3.5 oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.00-svn build #3571
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = oscam
pwd = oscam
disabled = 0
expdate =
group = 2
hostname =
uniq = 0
sleep = 0
monlevel = 1
au = 1
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd,hdplus
caid = 1702,1833
betatunnel = 1833.FFFF:1702
ident = 0000:000000
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
user = oscam1
pwd = oscam1
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 1
au = hdplus
services = hdplus
caid = 1830
betatunnel =
ident = 0000:000000,003411,008011
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
user = dummy
pwd = dummy
disabled = 0
expdate =
group = 1,2,3
hostname =
uniq = 0
sleep = 0
monlevel = 1
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd,hdplus,blue+movie,freex
caid = 1702,1833,1830,0500,0D05,0D95
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
user = oscam2
pwd = oscam2
disabled = 0
expdate =
group = 3
hostname =
uniq = 0
sleep = 0
monlevel = 1
services = freex
caid = 0500
betatunnel =
ident = 0000:FFF830,041700,041710
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
wird für die N-Line meiner HD+ Karte gebraucht, die in die cccam.cfg kommt
user = oscam1
pwd = oscam1
192.16.178.50 34000 oscam1 oscam1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
[account]wird für die N-Line meiner freextv Karte gebraucht, die in die cccam.cfg kommt
user = oscam2
pwd = oscam2

Beispiel Account:
[account]
user = dummy
pwd = dummy
disabled = 0
expdate =
group = 1,2,3 dieser User bekommt alle drei Karten
hostname =
uniq = 0
sleep = 0
monlevel = 1
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd,hdplus,blue+movie,freex
caid = 1702,1833,1830,0500,0D05,0D95
betatunnel = 1833.FFFF:1702 wichtig für Newcamd Clienten
ident = 0000:000000,003411,008011,041700
chid =
cccmaxhops = 3
keepalive = 1
numusers = 0
penalty = 0
bei services sind deshalb alle im oscam.services enthaltenden Labels aufgefürt.
Ebenso bei Caids
Bei Idents alle Provider.

Uber group regelt man welche Karten der User erhalten soll
group1 =HD+ Karte
group2 = S02 Karte
group3 = freextv Karte

Für jeden meine Argus Classic Receiver habe ich einen account wie dummy dummy angelegt. Jeder bekommt dann drei N-Lines mit den Ports 34001,34003 und 15052. Damit werden dann alle Sender der drei Karten hell

Es hier alles für Home CS konfiguriert.
Wer auch I-Net CS durchführen will muß bei den C-Lines und N-Lines der User die IP der Fritzbox durch seinen account bei dyndns ändern:
Beispiel
C: xxxx.dyndns.org 42451 vip1 cccam1
N: xxxx.dyndns.org 34000 dummy dummy0102030405060708091011121314

Dies Configs bitte nicht gleich auf die Fritzbox kopieren. Kopiert sie erst in ein Linux fähiges Schreib Programm. Ich benutze Proton:
Link ist nicht mehr aktiv.
Von dort mit alles markieren, kopieren direkt in das entsprende freetz kopieren. Natürlich in ein vorher gelöschtes Feld.
Meine Configs speichere ich immer so: Datei speichern unter-in einen vorher festgelegten Ordner auf dem PC. Dabei benenn ich die Datei vor dem Speichern um. Beispiel cccam.cfg-20.01.2011, newcs.xml- 20.01.211, oscam.config-20.01.2011....... So kann ich die jederzeit wieder hervorholen und in mein freetz kopieren.

Viel Erfolg

Falls jemand Fehler findet: Bitte per PN melden.

Mlg piloten

Pilot · 4. Juni 2011

AW: Configs für eine Server Fritzbox

hab auf meiner Fritzbox jetzt ein freetz von Pfof. Linux laufen. Sehr stabil.
Link Removed
Hier meine Configs für oscam als Kartenleser und cccam als C-Line Spender.
Oscam vergibt hier auch N-Lines für meine Argus Classic:

cccam.cfg
Basis: S02 Karte, weiße HD+ Karte, freextv Karte, Mille Karte für SRG und ORF ICE Karte

#SERIAL READER: /dev/ttyUSB0 phoenix
#SERIAL READER: /dev/ttyUSB0 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 96000000

N: 192.168.178.99 35000 oscam4 oscam4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 192.168.178.99 35001 oscam3 oscam3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 192.168.178.99 35002 oscam2 oscam2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 192.168.178.99 35003 oscam1 oscam1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 192.168.178.99 35005 oscam oscam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

F: cccam test 2 0 1 { 0:0:2,09c4:0:0 }
F: user1 21001 2 0 0 { 0:0:2,09c4:0:0 }
F: fuser2 21002 2 0 0 { 0:0:2,09c4:0:0 }
F: user3 21003 2 0 1 { 0:0:2,09c4:0:0 }
F: user4 21004 2 0 1 { 0:0:2,09c4:0:0 }
.
.
.
F: user10 21010 2 0 1 { 0:0:2,09c4:0:0 }

SERVER LISTEN PORT : 42451

WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam

WEBINFO LISTEN PORT : 168888

Show TIMING : yes
LOG WARNINGS : /tmp/warnings.txt
SHOW EXTENEDED CLIENT INFO : yes

MINIMUM DOWNHOPS: 1
DISABLE EMM: NO

SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key

AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key

STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw

CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio

PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers

CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo

Daraus baut mann diese C-Lines:
1.C: 192.168.178.99 42451 user1 21001 # fürs I-Net: C: deinccount.dyndns.org 42451 user1 21001
2. C: 192.168.178.99 42451 user2 21002 # fürs I-Net: C: deinccount.dyndns.org 33539 user2 21002
.
.
10. C:192.168.178.99 42451 user10 21010 # fürs I-Net: C: deinccount.dyndns.org 42451 user10 21010

oscam.config

# oscam.conf generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /dev/null
disablelog = 1
cachedelay = 120
nice = -1
maxlogsize = 2480
saveinithistory = 1
lb_mode = 1
lb_save = 100
lb_savepath = /usr/local/etc/.oscam/stat

[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 1

[newcamd]
port = 35000@1830:000000,003411,008011
port = 35001@1702:000000
port = 35002@1833:000000
port = 35003@0500:000000,23800
port = 35004@0500:021110,030B00,030700,024400,020810,FFF400,032820,041700,041710
port = 35005@0D95:000000,000004,000008,00000C,000010
key = 0102030405060708091011121314

[cccam]
port = 42451
reshare = 1
version = 2.2.1
nodeid = 364A0E8E104613A6
[webif]
httpport = xx
httpcss = /var/media/ftp/uStor01//cs/oscam//proflinux_ddcstyle.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = skysat
protocol = mouse
device = /dev/ttyUSB0
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd,hdplus,blue+movie,austria_sat,bluemovie+hd,selekt+hd
caid = 1702,1833
boxid = 12345678
detect = cd
mhz = 600
cardmhz = 600
ident = 1702:000000
group = 1
emmcache = 1,3,2
ccchop = 2

[reader]
label = hdplussat
protocol = mouse
device = /dev/ttyUSB1
services = hdplus
smargopatch = 1
caid = 1830
rsakey = BF...................................................................4DD5
boxkey = A7...............................7C
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,3,2

[reader]
label = freexsat
protocol = mouse
device = /dev/ttyUSB2
services = freex
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:FFF830,041700,041710
group = 3
emmcache = 1,3,2
blockemm-g = 1
deprecated = 1

[reader]
label = millesat
protocol = mouse
device = /dev/ttyUSB3
services = srg
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:FFF400,020810,020820,024400,023800,030700,030B00,023B00,021110,040810
group = 4
emmcache = 1,3,2

[reader]
label = orfsat
protocol = mouse
device = /dev/ttyUSB4
services = orf
smargopatch = 1
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:000000,000004,000008,00000C,000010
group = 5
emmcache = 1,3,2

oscam.services

# oscam.services generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[skymce]
caid = 1702,1833
provid = 000000
srvid = 0096,0097,0098,0099,009A,009B,009C,1750,1752,1754,1756,1758,175A,175C,1850,1852,1854,1856,1858,185A,185C

[skybuli]
caid = 1702,1833
provid = 000000
srvid = 180C,170C,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,00FC

[skysport]
caid = 1702,1833
provid = 000000
srvid = 0011,00DD,00DE,00FD,014D,0143,0139,012F,0125,011B,0107,0111,016B,0175,0035,176A,178E,0154,0158,186A,188E,186A,176A,178C,18E2,18BE,18BA,186A,118C,186A,188C,188E,0084,0077,3331,3335,0041

[skyextra]
caid = 1702,1833
provid = 000000
srvid = 3393,003E,3398,0042,3394,0043,3331,3395,0044,4462,003C,7009,700A,003F,3397,17E0,0148,17D6,17D2,17D0,17C6,17D4,0157,17C4,184E,17DC,003D,4461,700A,6FF1,3395,0016,18E0,0148,18D6,18D2,18D0,18C6,18D4,0157,18C4,184E,18DC,003D,4461,700A,6FF1,3395,0016,001B,01AC,1859,01BA,01BB,01B9,1859,6FF1,044D,18DE,18D8,0781,18DA,0039,003A,0025,0027,0038,0021,0026,0023,0037,003B

[skyfilm]
caid = 1702,1833
provid = 000000
srvid = 000A,000B,002B,0009,0029,0014,0204,0203,0019,0008,1742,1744,1746,1748,171C,1718,174C,1728,17AC,174E,1842,1844,1848,181C,1818,184C,1828,18AC,184E,1846,18C0,18C2

[skywelt]
caid = 1702,1833
provid = 000000
srvid = 002A,0015,0018,000E,0022,001C,0010,0013,00A8,000D,000C,001D,001A,001B,0024,0034,0032,0017,174A,171E,1740,1782,1772,175E,179C,17A0,1720,1722,1766,1768,176C,1764,176E,1770,1700,177E,1760,1762,0206,184A,181E,1840,1882,1872,185E,189C,18A0,1820,1822,1866,1868,186C,1864,186E,1870,1800,187E,1860,1862,0206,18A6,7001,7009

[skyhd]
caid = 1702,1833
provid = 000000
srvid = 0081,0082,0083,0084,18B6,18BC,18B4,18B8,18BA,18B2,18B0,18B6,18C0,18C2,18C2,18BE,18BA,1807,1801,1809,180B,1805,1707,1701,1707,170B,1705,006A,006B,0071,0070,0072,006F,18B6,18BA,189A,1803,18B6,18B4,189A,0077,0084

[hdplus]
caid = 1830,1843
provid = 003411,000000,008011
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,277E,1ACC,1ACE,1AEE,1AEA,1AEC,1AAE,EF14,1AAA,1AA4,5273

[blue+movie]
caid = 1702,1833
provid = 000000
srvid = 0159,0463,016D,0201,1826

[freex]
caid = 0500
provid = FFF830,041700,041710
srvid = 378C,3786,378D,378E,378A,008C,3788,43B5,1D90,1D91,1D8F,1D92,1210,1272,1273,1274,1275,1275,227B,1212,0013,0014,0111,0401,0400,1D7F,1213,128F

[orf]
caid = D050,0D95
provid = 000000,000004,000010
srvid = 329C,32CA,32CB,32CC,32CD,32DE,32DF,32D1,32D2,32D3,32D4,132F,1330

[austria_sat]
caid = 0D05,0D95
provid = 000060
srvid = 4461,4462,003E,07FE,0046,2EEE,6FF3,6FEE,6FFF,6FF0,0045,07FD,07FA,1FE4,17D6,17D5,17D5,17D8,0450,1FC6,1FC4,1FD4,0BC3,0BC4,1EF2,018E

[bluemovie+hd]
caid = 1702,1833
provid = 000000
srvid = 007A,0079,1813,1815,1826

[srg]
caid = 0500
provid = 023800,040810
srvid = 36B3,36B2,36B8,36B9,0385,038B,03DE,02CD

[selekt+hd]
caid = 1702,1833
provid = 000000
srvid = 0012,0078,0079,007A,00FB,00FE,0105,0108,010F,0119,0123,012D,0137,0141,014B,0078

[tntsat_hd]
caid = 0500
provid = 030B00
srvid = 2329,233D,232A,233E,245E,2472,2458,246C

[tntsat_sd]
caid = 0500
provid = 030B00
srvid = 20B3,20AE,20A5,20B6,1F48,25E5,25E6,25E7,2649,25E9,264D,2650,2651,25ED,25EE,25EF,2653,25E8,264A,264B,264C,25EA,264E,264F,25EB,25EC,1F57,2652,25F0,23F3,2407,1F41,1F58,20AF,20B4,20A4,20B5,1FEB,1FD8,4284,4290,1F44,1F56,1F4A,1F55,23F1,2405,23F6,240A,23F7,240B

oscam.srvid

oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = kinder
pwd = zimmer
group = 1,2,3,4,5
monlevel = 1
caid = 1830,1702,1833,0500
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700,041710,023800,040810

0000:000000,003411,008011,041700,023800,000004,000008,00000C,000010
cccmaxhops = 1

[account]
user = dummy
pwd = dummy2
group = 1,2,3
monlevel = 1
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd,hdplus,blue+movie,freex,selekt+hd
caid = 1702,1833,1830,0500
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700,041710,023800,040810
cccmaxhops = 3

[account]
user = pingu
pwd = lux1
group = 1,2,3,4,5
monlevel = 0
au = 1
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd,hdplus,blue+movie,freex,bluemovie+hd,srg,selekt+hd
caid = 1702,1833,1830,0500,0D95
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833.006F:1702,1833.0070:1702,1833.0071:1702,1833.0075:1702,1833.007A:1702,1833.007B:1702,1833.007C:1702,1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702,1833.0077:1702
ident = 0000:000000,003411,008011,041700,023800,000004,000008,00000C,000010
cccmaxhops = 3

[account]
user = pilot
pwd = dummy2
group = 1,2,3,4,5,6,7
services = skymce,skysport,skyextra,skyfilm,skywelt,skyhd,hdplus,blue+movie,freex,srg
caid = 1702,1833,0500,1830
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700,041710,023800,040810
cccmaxhops = 2
cccreshare = 0

[account]
user = meine
pwd = tvkarte
group = 1,2,3,4,5
au = 1
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd,hdplus,blue+movie,freex,orf,austria_sat,bluemovie+hd,srg,selekt+hd
caid = 1702,1833,1830,0500,0D95
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700,041710,023800,040810,000004,000008,00000C,000010
cccmaxhops = 2
cccreshare = 0

[account]
user = oscam
pwd = oscam
group = 1
monlevel = 1
au = 1
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,skyhd,blue+movie,bluemovie+hd,selekt+hd
caid = 1702,1833
betatunnel = 1833.FFFF:1702
ident = 0000:000000

[account]
user = oscam1
pwd = oscam1
group = 2
monlevel = 1
au = 1
services = !skymce,!skybuli,!skysport,!skyextra,!skyfilm,!skywelt,!skyhd,hdplus,!blue+movie,!freex
caid = 1830,1843
ident = 0000:000000,003411,008011

[account]
user = oscam2
pwd = oscam2
group = 3,4
monlevel = 1
au = 1
services = freex,srg,tntsat_hd
caid = 0500
ident = 0000:000000,003411,008011,041700,041710,023800,040810,030B00

[account]
user = oscam3
pwd = oscam3
group = 4
au = millesat
services = srg
caid = 0500
ident = 0000:000000,023800
cccmaxhops = 3
cccreshare = 0

[account]
user = oscam4
pwd = oscam4
group = 5
monlevel = 1
au = orfsat
services = orf,austria_sat
caid = 0D95
ident = 0000:000000,003411,008011,041700,041710,023800,040810,000004,000008,00000C,000010
cccmaxhops = 3

die accounts kinder,zimmer-dummy,dummy2-pilot,dummy2 = N-Lines für Argus Classic
N: 192.168.178.99 35001 kinder zimmer 0102030405060708091011121314 # mit port 35002 = caid 1833 = Sky Karte werden auch die HD Kanäle auf dem Argus Classic hell # fürs I-Net IP der Server Fritzbox austauschen gegen deinaccunt.dyndns.org
N: 192.168.178.99 35000 kinder zimmer 0102030405060708091011121314 = Hd+ Karte
N: 192.168.178.99 35003 kinder zimmer 0102030405060708091011121314 = freextv Karte
N: 192.168.178.99 35002 kinder zimmer 0102030405060708091011121314 = ORF ICE Karte
N: 192.168.178.99 35004 kinder zimmer 0102030405060708091011121314 = SRG Karte

N: 192.168.178.99 25550 dummy dummy2 0102030405060708091011121314
N: 192.168.178.99 25550 pilot dummy2 0102030405060708091011121314
die accounts oscam,oscam-oscam1,oscam2-oscam3,oscam3-oscam4,oscam4 = N-lines für die cccam.cfg (siehe oben in der selben)
mit oscam,oscam und port 25550 wird in die Sky Karte angesprochen auf caid 1702
mit oscam1,oscam1 und port 35000 wird in die HD+ Karte angesprochen auf caid 1830(weiße Karte).wer eine schwarze Karte hat schreibt überall bei 1830 die 1843
mit oscam2,oscam2 und port 35003 wird in die freextv Karte angesprochen auf caid 0500
mit oscam3,oscam3 und port 35004 wird in die SRG(mille) Karte angesprochen auf caid 0500
mit oscam4,oscam4 und port 35005 wird in die ORF ICE Karte angesprochen auf caid 0D95

Mlg piloten

Pilot · 16. Juni 2011

AW: Configs für eine Server Fritzbox

Configs für einer Dolly Buster Karte
Inclusive Oscam.services für den Argus Classic
oscam.config

# oscam.conf generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/media/ftp/uStor01/OScam.log
cachedelay = 120
nice = -1
maxlogsize = 2480
preferlocalcards = 1
saveinithistory = 1

[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 1

[newcamd]
port = 34000@0500:FFFAA0,042200,042210
key = 0102030405060708091011121314

[cccam]
port = 51280
reshare = 1
version = 2.1.1
nodeid = 364A0E8E104613A6
[webif]
httpport = 83
httpcss = /var/media/ftp/uStor01//cs/oscam//proflinux_ddcstyle.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = dollybustersat
protocol = mouse
device = /dev/ttyUSB0
services = dollybuster
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0500:FFFAA0,042200,042210
group = 1
emmcache = 1,3,2
blockemm-g = 1
ccchop = 2
deprecated = 1

oscam.services

# oscam.services generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[dollybuster]
caid = 0500
provid = FFFAA0,042200,042210
srvid = 1264,1272,1273,1274,1275,1D8B,1D8C,1D8D,1D8E,1D98

oscam.srvid

0500:1264|Dolly Buster|HD|TV|
0500:1272|Dolly Buster|Media|TV|
0500:1273|Dolly Buster|Hardcore|TV|
0500:1274|Dolly Buster|Classic|TV|
0500:1275|Dolly Buster|Five Star|TV|
0500:1D8A|Dolly Buster|HD|TV|
0500:1D8B|Dolly Buster|Media|TV|
0500:1D8C|Dolly Buster|Hardcore|TV|
0500:1D8D|Dolly Buster|Classic|TV|
0500:1D8E|Dolly Buster|Five Star|TV|

oscam.user

[account]
user = oscam
pwd = oscam
group = 1
au = dollybustersat
services = dollybuster
caid = 0500
ident = 0500:FFFAA0,042200,042210
cccmaxhops = 1

N-Line für die cccam.cfg:
N: 192.168.178.99 34000 oscam oscam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Alle Sender von der Abo Karte(4Sender ohne HD) werden hell mit diesen Configs.

Mlg piloten

Pilot · 13. Juli 2011

AW: Configs für eine Server Fritzbox

Configs für meinen Pingulux:. Setze ich ein unter Spark und E2

oscam.config

# oscam.conf generated automatically by Streamboard oscam 1.10 buikd 5705
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /root/plugin/var/log/oscam/oscam.log
fallbacktimeout = 2500
clientmaxidle = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 500
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 500
lb_savepath = /tmp/.oscam/stat
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_use_locking = 1

[monitor]
httpcss = /var/config//hexer ddcstyle.css
monlevel = 4
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ines
pmt_mode = 1
request_mode = 0

[webif]
httpport = 8888
httphelplang = de
httpuser = ines
httppwd = pass
httprefresh = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpsavefullcfg = 1

oscam.server interner Reader mit einer HD+ Karte und 7 C-Lines als cccam proxyserver. der erste cccam Proxy Server ist von meiner eigenen C-Line. user und passwort sind im Orginal natürlich anders.

# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #4685
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = reader
enable = 1
protocol = internal
device = /dev/sci0
services = hdplus
caid = 1830
boxid = 12345678
rsakey = BF.......................................4DD5
boxkey = A7....................37C
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:000000,003411,008011
group = 1
emmcache = 1,2,3
lb_weight = 100

[reader]
label = cccam_server
enable = 1
protocol = cccam
device = xxxxxxx.dyndns.org,64582
user = pingu
password = lux1
services = hdplus,orf,skyde,freex,srg
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833,1830,0500,0D95
ident = 0000:000000,003411,008011,FFF830,041700,041710,023800,040810,0FF400,020810,020820,024400,030700,030B00,023B00,021110,000000,000004,000010
group = 2
emmcache = 1,3,2
lb_weight = 100
cccversion = 2.1.1
cccmaxhops = 3
ccckeepalive = 1

[reader]
label = cccam_server2
enable = 1
protocol = cccam
device = xxxxx.blogdns.net,43678
user = user
password = pass
services = skyde
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833
ident = 0000:000000
group = 3
lb_weight = 100
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1

[reader]
label = cccam_server3
enable = 1
protocol = cccam
device = xxxxx.dyndns.biz,25881
user = user
password = pass
services = skyde
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833
ident = 0000:000000
group = 4
lb_weight = 100
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1

[reader]
label = cccam_server4
enable = 1
protocol = cccam
device = xxxxxxxx.dyndns.org,52581
user = user
password = pass
services = skyde,dollybuster
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833,0500
ident = 0000:000000,FFFAA0,042200,042210
group = 5
lb_weight = 100
cccversion = 2.1.1
cccmaxhops = 3
ccckeepalive = 1

[reader]
label = cccam_server5
enable = 1
protocol = cccam
device = xxxxx.dyndns.org,41251
user = user
password = pass
services = skyfde
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833
ident = 0000:000000
group = 6
lb_weight = 100
cccversion = 2.0.11
cccmaxhops = 3
ccckeepalive = 1

[reader]
label = cccam_server6
enable = 1
protocol = cccam
device = xxxxxx.dyndns.org,61978
user = user
password = pass
services = hdplus,skyde
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833,1830
ident = 0000:000000,003411,008011
group = 7
emmcache = 1,3,2
lb_weight = 100
cccversion = 2.1.1
cccmaxhops = 3
ccckeepalive = 1
[reader]
label = cccam_server7
enable = 1
protocol = cccam
device = xxxxxxx.dyndns.org,38788
user = user
password = pass
services = hdplus,skyde
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833,1830,0D95
ident = 0000:000000,003411,008011,000004,000010
group = 8
emmcache = 1,3,2
lb_weight = 100
cccversion = 2.1.1
cccmaxhops = 3
ccckeepalive = 1
oscam.services

oscam.services

# oscam.services generated automatically by Streamboard oscam 1.10 buikd 5705
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[orf]
caid = 0D95
provid = 000000,000004,000010
srvid = 132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27
[orf+]
caid = 0648
provid = 000000
srvid = 132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,14B4,14B5

[austria_sat]
caid = 0D05,0D95,0648
provid = 000000
srvid =

[skyde]
caid = 1702,1833,09C4
provid = 000000
srvid = 0008,0009,000A,000B,0014,0019,0029,002B,0203,0204,000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8,0201,0206,0021,0023,0025,0026,000F,0027,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,07FF,2EFE,3331,4461,4462,6FF1,7009,700A,7001,0011,0035,00DD,00DE,00FD,0107,0111,011B,0125,012F,0139,0143,014D,016B,0175,00FC,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,0077,0081,0069,0082,0083,0084,0071,006A,006B,0072,0070,006F,0075

[hdplus]
caid = 1830 #das ist für eine weiße HD+ Karte.schwarze Karte =1843, V13 Karte mit HD+ = 09C4
provid = 000000,003411,008011
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274,277E

[freex]
caid = 0500
provid = FFF830,041700,041710
srvid = 378C,3786,378D,378E,378A,008C,3788,43B5,1D90,1D91,1D8F,1D92,1210,1272,1273,1274,1275,1275,227B,1212,0013,0014,0111,0401,0400,1D7F,1213,128F

[srg]
caid = 0500
provid = 023800,040810
srvid = 36B3,36B2,36B8,36B9,0385,038B,03DE,02CD

[dollybuster]
caid = 0500
provid = FFFAA0,042200,042210
srvid = 1264,1272,1273,1274,1275,1D8B,1D8C,1D8D,1D8E,1D98

oscam.srvid

oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn build #4685
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]# oscam.user generated automatically by Streamboard oscam 1.10 buikd 5705
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = ines
pwd = pass
group = 1,2,3,4,5,6,7,8
monlevel = 4
au = 1
services = hdplus,orf,skyde,freex,srg,dollybuster
caid = 1702,1833,1830,0D95,0500
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833.006F:1702,1833.0070:1702,1833.0071:1702,1833.0075:1702,1833.007A:1702,1833.007B:1702,1833.007C:1702,1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702,1833.0077:1702
ident = 0000:000000,003411,008011,041700,FFF400,020810,020820,024400,023800,030700,030B00,023B00,021110,040810,000000,000004,000010,FFFAA0,042200,042210
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 3
cccreshare = 1
keepalive = 1

oscam.tiers

oscam.provider

neu:

oscam.dvbapi

######### oscam.dvbapi ##############
#
######### P = Priority ## I = Ignores ##########
#
# Sky Germany S02 Card
P: 1702:000000
P: 1833
I: 09c4
I: 1722

# HDplus HD01 Card (white)
P: 1830:000000
P: 1830:003411
I: 1834

# HDplus HD02 Card (black)
#P: 1843:000000
#P: 1843:003411
#I: 1830

# ORF/AustriaSat
P: 0D95:

# FreeX TV und Mille
P: 0500

# Andere Karten

P: 0648

################################################
### Falls du irgenteine Card vom eigenen #######
### Server speziell mit EMM versorgen ##########
### möchtest, ist die P (prio) folgend zu ######
### gestalten: Beispiel mit der HD01: ##########
### P: 1830:000000 1 ###########################
### P: 1830:003411 1 ###########################
################################################
#
##################### Ende #####################

oscam.whitliste

######################### oscam.whitelist #####################################
#
# oscam.whitelist - 2011/12/29
# Whitelist-Entry:
# w:caid

rov:srvid

id:chid:ecmlen1[,ecmlen2,...,ecmlenN]
#
# Ignore-Entry:
# i:caid

rov:srvid

id:chid:ecmlen1[,ecmlen2,...,ecmlenN]
#
# Example:
# w:1702 #all caid 1702 is on whitelist
# i:500::1234 #ignores all caid 0500 srvid 1234
#
# Rules:
# 1. First match - first used
# 2. No (valid) lines in oscam.whitelist, no filter
# 3. When end of file is reached and no line is matching, request is filtered. If you want to use this as a blacklist, just add
# w: as your last line! This matches all, so if no line before is matching, this entry allowes all others
#
# Link:

Sie müssen registriert sein, um Links zu sehen.

#
######## w = whitelist ## i = ignores #############
#
# S02 *********************************************
w:1702:000000::::93
#
# S02-Tunnel **************************************
w:1833:000000::::89
#
# V13 *********************************************
#w:09C4:000000::::46,58,90,95
#
# HD+ (HD01) **************************************
w:1830:000000::::92
w:1830:003411::::92
w:1830:008011::::92
#
# HD+ (HD02) **************************************
#w:1843:000000::::89
#w:1843:003411::::89
#w:1843:008011::::89
#
# CAMD3-Keys **************************************
w:0D05:::::9C

#ORF/Austriasat 19.2E
w:0D95:000004::::80,B8,F0
w:0D95:000010::::80,B8,F0

#SRG 13E
w:0500:023800::::2A

#SRG 13E
w:0500:040810::::30

#freextv 13E
w:0500:041700::::3E,43,44,4

#
# IGNORES #########################################
#i:
#
############################## Ende ############################################

Pilot · 27. Juli 2011

AW: Configs für meine Server Fritzbox plus Configs für meinen pingulux

Hier mal die Confings mit oscam allein. neues freetz:
Firmware:
Freetz-Version freetz-devel-7500M Link ist nicht mehr aktiv.
oscam Version:

OSCAM 1.10rc -DEB-Prof.Linux- build #5990

von hier:
Link ist nicht mehr aktiv.

Es werden fast die gleichen Configs genommen wie im 2. Beitrag. Nur hier wird auf die cccam.cfg verzichtet. In der oscam config gibts einen cccam Bereich.
Mit diesem cccam Bereich und oscam.user werde die C-Lines erstellt.
Dafür müssen im oscam.user für jede F-Line, die vorher in der cccam.cfg waren accounts erstellt werden.

oscam.config
cccam Bereich rot markiert
Newcamd Bereich wird für N-Line gebraucht. Für Receiver, die nur Newcamd beherrschen oder zum Testen auf jeden anderen Receiver

# oscam.conf generated automatically by Streamboard OSCAM 1.10rc-svn-SB-Trunk-by-gifftstaub build #5657
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
serverip = 0.0.0.0
usrfile =
mailfile =
logfile = /var/media/ftp/uStor01/oscam.log
cwlogdir =
emmlogdir =
disablelog = 0
disableuserfile = 1
disablemail = 1
loghistorysize = 4096
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 0
failbancount = 0
cachedelay = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = -1
serialreadertimeout = 1500
suppresscmd08 = 0
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
dropdups = 0
lb_mode = 1
lb_save = 500
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_savepath = /usr/local/etc/.oscam/stat
lb_stat_cleanup = 336
lb_use_locking = 0
lb_reopen_mode = 0
lb_max_readers = 0
lb_auto_betatunnel = 1
resolvegethostbyname = 0

[monitor]
port = 988
serverip = 0.0.0.0
nocrypt =
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 1

[newcamd]
port = 35006@0D95:000000,000004,000008,00000C,000010;35000@1830:000000,003411;35001@1702:000000;35002@1833:000000;35003@0500:021110,030B00,030700,024400,020810,FFF400,032820,023800,041700,041710;35004@0500:000000,023800;34005@0500:FFFAA0,042200,042210
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[cs357x]
port = 51290
suppresscmd08 = 0

[cccam]
port = 42451
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.2.1
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
nodeid = 364A0E8E104613A6
reshare_mode = 0

[webif]
httpport = xx
httphelplang = de
httpuser =
httppwd =
httpcert =
httpcss = /var/media/ftp/uStor01//cs/oscam//hexer_ddcstyle.css
httpjscript =
httptpl =
httpscript =
httprefresh = 10
httpallowed = 192.168.178.1-192.168.255.255
httpdyndns =
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 1

oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = skysat
protocol = mouse
device = /dev/ttyUSB0
services = skymce,skybuli,skysport,skyextra,skyfilm,skywelt,s kyhd,hdplus,blue+movie,austria_sat,bluemovie+hd,se lekt+hd
caid = 1702,1833
boxid = 12345678
detect = cd
mhz = 600
cardmhz = 600
ident = 1702:000000
group = 1
emmcache = 1,3,2
ccchop = 2

[reader]
label = hdplussat
protocol = mouse
device = /dev/ttyUSB1
services = hdplus
smargopatch = 1
caid = 1830
rsakey = BF......................................................D5
boxkey = A7.................................7C
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,3,2

[reader]
label = freexsat
protocol = mouse
device = /dev/ttyUSB2
services = freex
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:FFF830,041700,041710
group = 3
emmcache = 1,3,2
blockemm-g = 1
deprecated = 1

[reader]
label = millesat
protocol = mouse
device = /dev/ttyUSB3
services = srg
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:FFF400,020810,020820,024400,023800,030700,030 B00,023B00,021110,040810
group = 4
emmcache = 1,3,2

[reader]
label = orfsat
protocol = mouse
device = /dev/ttyUSB4
services = orf
smargopatch = 1
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
ident = 0000:000000,000004,000008,00000C,000010
group = 5
emmcache = 1,3,2

oscam.services

# oscam.services generated automatically by Streamboard OSCAM 1.20 -DEB-Freetz--Prof.Linux- build #5898
# Read more:

Sie müssen registriert sein, um Links zu sehen.

###argus classic####
[argus-hd+]
caid = 1830
provid = 003411,000000,008011
srvid = 1AAA,1AA4,1ACC,1ACE,1AEE,1AEA,1AEC,1AAE,1AC0,1AC2
####argus classic####
[argus-sky-full]
caid = 1702,1833
provid =
srvid = 18AC,1829,18B8,182B,18BA,1801,180D,1896,1809,180B,01BA,189A,1803,1859,1805,1807,18B6,1820,18BC,1842,1844,1846,1848,184C,181E,185E,1831,1825,1822,1866,1868,1840,1818,1828,181C,1872,189C,18C6,18C4,1821,182C,1882,1862,1860,1827,184A,18EF,18A6,182D,186C,184E,1864,186E,1870,0781,1823,195A,1857,1800,186A,188C,1812,1894,1890,187A,183E,183A,1836,181A,1832,18F8,18FC,188E,1833,18A0,187E,1826,1813,1815,18F2,18F6,18FA,1811,1802,1804,1806,1808,180A,18A8,1874,1878,1876,1814,182A,180C,1816,1830,1834,1838,183C,1884,1886,1888,18F0,18F4,1810,1850,1852,1854,1856,1858,185A,185C

[skywelt]
caid = 1702
srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A, 001B,001C,001D,0022,0024,002A,0032,0034,00A8,0206

[skyfilm]
caid = 1702,1833
srvid = 0008,0009,000A,000B,0014,0019,0029,002B,0203,0204

[skysport]
caid = 1702,1833
srvid = 0011,0035,00DD,00DE,00FD,0107,0111,011B,0125,012F, 0139,0143,014D,016B,0175

[skybundesliga]
caid = 1702,1833
srvid = 00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156, 0160,00FC

[skyselect]
caid = 1702,1833
srvid = 00FB,00FE,0105,0108,010F,0119,0123,012D,0137,0141, 014B,0012,0078,0079,007A,

[skyhd]
caid = 1702,1833
srvid = 0069,006A,006B,006F,0070,0071,0072,0075,0077,0079, 0081,0082,0083,0084,007C,0076

[skyweltextra]
caid = 1702,1833
srvid = 0021,0023,0025,0026,0038,003A,3331,07FF,0027,0037, 2EFE,0039,4461,4462,6FF1,7001,100A,700A

[bluemovie]
caid = 1702,1833
srvid = 0201,0159,0163,016D

[skysonstige]
caid = 1702,1833
srvid = 003B,000F,0045,0046

[hdplus]
caid = 1830
provid = 003411,000000,008011
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,277E,5273,5274,1519

[orf] # crypto
caid = 0D95
provid = 000000,000004,000010
srvid = 132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A5,33A7

[orf+] #iredeto
caid = 0648
provid = 000000,000004,000010
srvid = 132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,14B4,14B5,33A5,33A7

[austria_sat]
caid = 0D05,0D95
provid = 000060
srvid = 4461,4462,003E,07FE,0046,2EEE,6FF3,6FEE,6FFF,6FF0,0045,07FD,07FA,1FE4,17D6,17D5,17D5,17D8,0450,1FC6,1FC4,1FD4,0BC3,0BC4,1EF2,018E

[freex]
caid = 0500
provid = FFF830,041700,041710
srvid = 378C,3786,378D,378E,378A,008C,3788,43B5,1D90,1D91,1D8F,1D92,1210,1272,1273,1274,1275,1275,227B,1212,0013,0014,0111,0401,0400,1D7F,1213,128F

[srg]
caid = 0500
provid = 023800,040810
srvid = 36B3,36B2,36B8,36B9,0385,038B,03DE,02CD

oscam.srvid

oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.00-trunk_svn build #5279
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = user1 # aus der 1. F-Line der ehemaligen cccam.cfg
pwd = 21001
group = 1,2,3,4,5
monlevel = 0
au = 1
services =hdplus, skywelt,,skyfilm,skysport,skybuli,skyselect,skyhd,skyweltextra,bluemovie,skysonstige,freex,srg,orf,orf+,austriasat
caid = 1702,1833,1830,0500,0D95
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0075: 1702,1833.007A:1702,1833.007B:1702,1833.007C:1702, 1833.007E:1702,1833.007F:1702,1833.0080:1702,1833. 0081:1702,1833.0082:1702,1833.0083:1702,1833.0084: 1702,1833.0077:1702
ident = 0000:000000,003411,008011,041700,023800,000004,000 008,00000C,000010
cccmaxhops = 3

[account]
user = user2 # aus der 2. F-Line der ehemaligen cccam.cfg
pwd = 21002
group = 1,2,3,4,5
monlevel = 0
au = skysat,hadplussat,freexsat,millesat,orfsat
services = hdplus, skywelt,,skyfilm,skysport,skybuli,skyselect,skyhd,skyweltextra,bluemovie,skysonstige,freex,srg,orf,orf+,austriasat
caid = 1702,1833,1830,0500,0D95
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0075: 1702,1833.007A:1702,1833.007B:1702,1833.007C:1702, 1833.007E:1702,1833.007F:1702,1833.0080:1702,1833. 0081:1702,1833.0082:1702,1833.0083:1702,1833.0084: 1702,1833.0077:1702
ident = 0000:000000,003411,008011,041700,023800,000004,000 008,00000C,000010
cccmaxhops = 3

[account]
user = user10 # aus der 10. F-Line der ehemaligen cccam.cfg
pwd = 21010
group = 1,2,3,4,5
monlevel = 0
au = skysat,hadplussat,freexsat,millesat,orfsat
services = hdplus, skywelt,,skyfilm,skysport,skybuli,skyselect,skyhd,skyweltextra,bluemovie,skysonstige,freex,srg,orf,orf+,austriasat
caid = 1702,1833,1830,0500,0D95
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0075: 1702,1833.007A:1702,1833.007B:1702,1833.007C:1702, 1833.007E:1702,1833.007F:1702,1833.0080:1702,1833. 0081:1702,1833.0082:1702,1833.0083:1702,1833.0084: 1702,1833.0077:1702
ident = 0000:000000,003411,008011,041700,023800,000004,000 008,00000C,000010
cccmaxhops = 3

[account]
user = kinder
pwd = zimmer
group = 1,2,3,4,5
monlevel = 0
caid = 1830,1702,1833,0500,0D95
services = hdplus,skywelt,,skyfilm,skysport,skybuli,skyselect,skyhd,skyweltextra,bluemovie,skysonstige,freex,srg,orf,orf+,austriasat
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700,041710,023800,040 810
0000:000000,003411,008011,041700,023800,000004,000 008,00000C,000010
cccmaxhops = 1

[account]
user = dummy
pwd = dummy2
group = 1,2,3
monlevel = 1
services = hdplus,skywelt,,skyfilm,skysport,skybuli,skyselect,skyhd,skyweltextra,bluemovie,skysonstige,freex,srg,orf,orf+,austriasat
caid = 1702,1833,1830,0500,0D95
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700,041710,023800,040 810
cccmaxhops = 3

[account] # account für meinen pingulux
user = pingu
pwd = lux1
group = 1,2,3,4,5
monlevel = 0
au = skysat,hadplussat,freexsat,millesat,orfsat
services = hdplus,skywelt,,skyfilm,skysport,skybuli,skyselect,skyhd,skyweltextra,bluemovie,skysonstige,freex,srg,orf,orf+,austriasat
caid = 1702,1833,1830,0500,0D95
betatunnel = 1833.0072:1702,1833.006A:1702,1833.006B:1702,1833. 006F:1702,1833.0070:1702,1833.0071:1702,1833.0075: 1702,1833.007A:1702,1833.007B:1702,1833.007C:1702, 1833.007E:1702,1833.007F:1702,1833.0080:1702,1833. 0081:1702,1833.0082:1702,1833.0083:1702,1833.0084: 1702,1833.0077:1702
ident = 0000:000000,003411,008011,041700,023800,000004,000 008,00000C,000010
cccmaxhops = 3

[account] # account für meinen argus classic
user = pilot
pwd = dummy2
group = 1,2,3,4,5
services = argus-hd+,argus-sky-full,freex,orf,austria_sat,srg
caid = 1702,1833,0500,1830
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700,041710,023800,040 810
cccmaxhops = 2
cccreshare = 0

[account]
user = meine
pwd = tvkarte
group = 1,2,3,4,5
au = skysat,hadplussat,freexsat,millesat,orfsat
services = hdplus,skywelt,,skyfilm,skysport,skybuli,skyselect,skyhd,skyweltextra,bluemovie,skysonstige,freex,srg,orf,orf+,austriasat
caid = 1702,1833,1830,0500,0D95
betatunnel = 1833.FFFF:1702
ident = 0000:000000,003411,008011,041700,041710,023800,040 810,000004,000008,00000C,000010
cccmaxhops = 2
cccreshare = 0

oscam.provid

oscam.tiers

oscam.dvapi

######### oscam.dvbapi ##############
#
######### P = Priority ## I = Ignores ##########
#
# Sky Germany S02 Card
P: 1702:000000
P: 1833
I: 09c4
I: 1722

# HDplus HD01 Card (white)
P: 1830:000000
P: 1830:003411
M: 1830 1830:003411 map caid 1830 always to provider 003411
I: 1843

# HDplus HD02 Card (black)
#P: 1843:000000
#P: 1843:003411
#I: 1830

# ORF/AustriaSat
P: 0D95:000000
P: 0D95:000004
P: 0D95:000008
P: 0D95:00000C
P: 0D55:000010
P: 0648:000000 1
P: 0648:000003 1
P: 0648:000010 1

# FreeX TV und Mille
P: 0500

################################################
### Falls du irgenteine Card vom eigenen #######
### Server speziell mit EMM versorgen ##########
### möchtest, ist die P (prio) folgend zu ######
### gestalten: Beispiel mit der HD01: ##########
### P: 1830:000000 1 ###########################
### P: 1830:003411 1 ###########################
################################################
#
##################### Ende #####################

1. C: 192.168.178.99 42451 user1 21001 # fürs I-Net: C: deinccount.dyndns.org 42451 user1 21001
2. C: 192.168.178.99 42451 user2 21002 # fürs I-Net: C: deinccount.dyndns.org 42451 user2 21002
.
.
.
3. C: 192.168.178.99 41251 user10 21010 # fürs I-Net: C: deinccount.dyndns.org 41251 user10 21010

N-Line wie im 2. Beitrag

Mlg piloten
Geändert von piloten (13. July 2011 um 23:02 Uhr)

Suche

Suche

Configs für meine Server Fritzbox plus Configs für meinen pingulux

Pilot

Pilot

Pilot

Pilot

Pilot

Ähnliche Themen

Spenden Unterstützung