Digital Eliteboard - Das Digitale Technik Forum
Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben
Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben
Talk Audi MMI MIB3 / MHI3 / MPR3, Map FW POI Updates - Talk Fragen
- Ersteller nordlicht1
- Erstellt am
osis
Newbie
- Registriert
- 18. Februar 2018
- Beiträge
- 21
- Reaktionspunkte
- 6
- Punkte
- 240
Yes I did this update.
MPR3_ER_AU_P4397_MU4397 is available.
Zuletzt bearbeitet von einem Moderator:
- Registriert
- 14. August 2020
- Beiträge
- 46
- Reaktionspunkte
- 17
- Punkte
- 245
Here you go. Make sure you are on one of the software trains to update:
P35*, P36*, P37*, P38*, P439*
Changes i noticed so far:
P35*, P36*, P37*, P38*, P439*
Changes i noticed so far:
- AA and CP now send information to the Virtual Cockpit. You get the navigation information shown as Icon in the Dashboard and in the Head-Up-Display.
- Visual improvements of the MMI
- Speech recognition is way better and feels reworked by a lot
- AA and CP are very stable now
Sie müssen registriert sein, um Links zu sehen.
hitmn
Newbie
- Registriert
- 16. November 2025
- Beiträge
- 3
- Reaktionspunkte
- 0
- Punkte
- 6
Hello,
to all. Newbie here.
Reading a lot last few days about updating the MMI to latest version. What I loose if I don't have red menu? It is not like the green menu in previous generation, nothing can be done there, except to view the geko codes and to update. Does this update fix the SOS error ? Can I make it if external amp/bang olufsen low is installed?
Several times in this topic someone ask for step by step guide, do you have it ? If not is that correct.
1. Get USB drive. Format it to FAT32.
2. Write all files from .7z
3. Rename files auto.....
4. Get it car and stick drive in possition 1
5. Start the update
6. Finish update.
Thank you !
to all. Newbie here.
Reading a lot last few days about updating the MMI to latest version. What I loose if I don't have red menu? It is not like the green menu in previous generation, nothing can be done there, except to view the geko codes and to update. Does this update fix the SOS error ? Can I make it if external amp/bang olufsen low is installed?
Several times in this topic someone ask for step by step guide, do you have it ? If not is that correct.
1. Get USB drive. Format it to FAT32.
2. Write all files from .7z
3. Rename files auto.....
4. Get it car and stick drive in possition 1
5. Start the update
6. Finish update.
Thank you !
- Registriert
- 14. August 2020
- Beiträge
- 46
- Reaktionspunkte
- 17
- Punkte
- 245
Updating to the latest version will remove the red menu, meaning you won’t be able to update without ODIS afterward. (Renaming files to "auto" may work, but this hasn’t been tested yet.) However, it’s possible to re-enable the FEC codes in the gateway unit—tools like VCTool can help restore the red menu. This means every future update will require a few extra steps.
If you previously had SOS errors, resolve them before updating; otherwise, you may encounter additional issues during the update process. The latest update also includes changes to the communication module, which can fail if there are error codes stored in the unit.
You can update using EA/BO, but you might need to reconfigure parameters afterward. This hasn’t been an issue for me, but it could happen depending on your setup. For MIB3 units, use NTFS formatting.
The step-by-step procedure is correct as described. Renaming files to "auto" is optional if you still have access to the red menu.
If you previously had SOS errors, resolve them before updating; otherwise, you may encounter additional issues during the update process. The latest update also includes changes to the communication module, which can fail if there are error codes stored in the unit.
You can update using EA/BO, but you might need to reconfigure parameters afterward. This hasn’t been an issue for me, but it could happen depending on your setup. For MIB3 units, use NTFS formatting.
The step-by-step procedure is correct as described. Renaming files to "auto" is optional if you still have access to the red menu.
hitmn
Newbie
- Registriert
- 16. November 2025
- Beiträge
- 3
- Reaktionspunkte
- 0
- Punkte
- 6
My SOS is not permanent. It happens sometimes and disappear in 10-20 minutes.
I do not have ODIS or VCTool. I have tried to and succeeded to update the system once from P33*to P36*, triyng to activate Android Auto Wireless - unsuccessfully. However local boys helped with it at the end
. There was no need for FEC re-enablement then. So If I need to re-enable FEC will ask them for help.
I see that for only 1 year there is several updates rolled- on. Which is unexpectedly a lot. I can try waiting for 6 more mounts if you think there will be much greater improvement in future.
EA/BO are these parameters datasets? or Coding for external amp in main unit? When updated 1st time I got no problems with this, so I expect no problems with this one.
There is a tool that I got from MIBSolution that formats the USB drive to 32GBFAT.
I do not have ODIS or VCTool. I have tried to and succeeded to update the system once from P33*to P36*, triyng to activate Android Auto Wireless - unsuccessfully. However local boys helped with it at the end
. There was no need for FEC re-enablement then. So If I need to re-enable FEC will ask them for help.I see that for only 1 year there is several updates rolled- on. Which is unexpectedly a lot. I can try waiting for 6 more mounts if you think there will be much greater improvement in future.
EA/BO are these parameters datasets? or Coding for external amp in main unit? When updated 1st time I got no problems with this, so I expect no problems with this one.
There is a tool that I got from MIBSolution that formats the USB drive to 32GBFAT.
- Registriert
- 14. August 2020
- Beiträge
- 46
- Reaktionspunkte
- 17
- Punkte
- 245
Occasional errors with the emergency call system can occur when reception is impaired. If there is no reception, an error will be reported, but this is not an issue for an update. FEC activation is only required from version 43** onwards, meaning after the update—versions before that do not have the Red Menu lock enabled. Currently, it can be assumed that, for example, version 4397 already includes all planned features, so no significant improvements will follow after that. After an update, it is possible to lose your parameters and have to re-import them; however, I have not personally experienced this, and it is rare. The Audi TSB information specifies NTFS as the required file system. FAT is incorrect and not supported.