Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

    Nobody is reading this thread right now.
C

chrisbond

Newbie
Registriert
2. Mai 2011
Beiträge
29
Reaktionspunkte
1
Punkte
28
Hi, ich habe einen Xtrend Et4000 Receiver, meine Abo-Karten: Sky S02 sowie ORF Ice. Ich sitzte seit mehreren Tagen vor den Oscam Einstellungen, habe sehr viel im Forum gelesen und ausprobiert. Doch ich bekomme die S02 nicht hell. ORF Ice ist kein Problem. Bitte um Hilfe! Möchte Home CS mit meinem Opticum HD 403 p betreiben. Mein Image: Open PLI 3.0, Server wär der Xtrend und der Opti mein Client. Hier meine Einstellungen.

Oscam Config:
[global]logfile = /tmp/oscam.log;stdout
nice = -1
WaitForCards = 1
preferlocalcards = 1
maxlogsize = 256


saveinithistory = 1
[webif]
HttpPort = 8888
htthelplang = de
HttpUser =
HttpPWD =
HttpRefresh = 60
HttpAllowed = 192.168.1.1-192.168.255.255
HttpReadOnly = 0


[dvbapi]
Enabled = 1
Boxtype = dreambox
User = dvbapi
decodeforever = 1
AU = 1

Oscam Server:
[reader]
label = ORFIce
protocol = internal
device = /dev/sci1
detect = CD
cardmhz = 368
caid = 0D95
boxid = 12345678
group = 1
emmcache = 1,1,2

[reader]
label = S02
protocol = internal
device = /dev/sci0
detect = CD
ecmwhitelist = 1702:93;1833:89
mhz = 600
cardmhz = 600
caid = 1702,1833
boxkey = 1122334455667788
group = 1
emmcache = 1,3,2
blockemm-unknown = 1


Oscam User:
[account]
User = dvbapi
AU = 1
betatunnel = 1833.FFFF:1702
Group = 1
[account]
User = chris
Pwd = chris
AU = 1
Group = 1

Bitte um Hilfe! Danke im Voraus.
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

hi,
was sagt das log wenn die karte eingelesen wird nach oscam start?
welche oscam version benutzt Du?
mal probiert die karten zu tauschen, die eine nach oben andere nach unten?
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Danke für die schnelle Antwort.
Ich benutze Oscam 1.20 EMU Version build r9087
Karten habe ich getauscht, hat nichts gebracht.

Status:
2013/12/29 07:11:10 542F40 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 07:11:10 542F40 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!

Bei der S02 steht: ERROR (no entitlements)

Kann es auch daran liegen, dass bei mir die Oscam Dvbapi, Oscam.Srvid leer sind ? Es sind keine Einträge dort vorhanden. Wenn ja, was muss ich da ändern?
 
Zuletzt bearbeitet:
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

die dateien sind nicht relevant, die karte sollte ohne die dateien erkannt werden

wenn du die karten tauschst von oben nach unten musst aber auch die device anpassen

poste mal das start log wenn die karte eingelesen wird
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Wo finde ich das start log?
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

am einfachsten übers webIF, auf FILES --> logfile gehen

und deine configs bitte posten ohne kommen wir ehh nicht weiter

am besten oscam erstmal neu starten
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Hier ist die Logfile

> OSCam << cardserver log switched at Sun Dec 29 09:09:13 2013
-------------------------------------------------------------------------------
2013/12/29 09:09:13 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:09:13 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:09:13 0 >> OSCam << cardserver log switched, version 1.20-EMU-Version, build r9087 (mipsel-unknown-linux-gnu)
2013/12/29 09:09:13 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:09:13 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:09:13 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:09:13 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:09:13 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!

Hier ist die Config:

[global]
logfile = /tmp/oscam.log;stdout
nice = -1
WaitForCards = 1
preferlocalcards = 1
maxlogsize = 256


saveinithistory = 1
[webif]
HttpPort = 8888
htthelplang = de
HttpUser =
HttpPWD =
HttpRefresh = 60
HttpAllowed = 192.168.1.1-192.168.255.255
HttpReadOnly = 0


[dvbapi]
Enabled = 1
Boxtype = dreambox
User = dvbapi
decodeforever = 1
AU = 1
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

1. das ist kein start log, start log sieht so aus
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Dec 29 08:08:20 2013
-------------------------------------------------------------------------------
2013/12/29 08:08:20 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9029 (arm-linux-gnueabi)
2013/12/29 08:08:20 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 9788
2013/12/29 08:08:20 0 s services reloaded: 0 services freed, 24 services loaded, rejected 0
2013/12/29 08:08:20 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/12/29 08:08:20 0 s signal handling initialized


2013/12/29 08:08:20 0 s OSEmu [camd35] creating thread for device 127.0.0.1
2013/12/29 08:08:20 0 s V14 [mouse] creating thread for device /dev/v14
2013/12/29 08:08:20 0 s HD01 [mouse] creating thread for device /dev/hd01
2013/12/29 08:08:20 0 s waiting for local card init
2013/12/29 08:08:20 31A970 p camd35 proxy 127.0.0.1:23456
2013/12/29 08:08:20 31A970 p OSEmu [camd35] proxy initialized, server 127.0.0.1:23456
2013/12/29 08:08:20 380A80 h webif: decompressed 52414 bytes back into 154648 bytes
2013/12/29 08:08:20 380A80 h HTTP Server running. ip=0.0.0.0 port=1XXXX
2013/12/29 08:08:21 362610 r HD01 [mouse] Reader initialized (device=/dev/hd01, detect=cd, mhz=357, cardmhz=357)
2013/12/29 08:08:21 362610 r HD01 [mouse] card detected
2013/12/29 08:08:21 31C640 r V14 [mouse] card detected
2013/12/29 08:08:22 31C640 r V14 [mouse] ATR: 3F FD 15 XX XX XX
2013/12/29 08:08:22 31C640 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2013/12/29 08:08:22 31C640 r V14 [mouse] Setting baudrate to 153600 bps
2013/12/29 08:08:22 31C640 r V14 [mouse] Calculated work ETU is 3.88 us
2013/12/29 08:08:22 31C640 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2013/12/29 08:08:23 362610 r HD01 [mouse] ATR: 3F FF 95 XX XX XX XX
2013/12/29 08:08:23 362610 r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/29 08:08:23 362610 r HD01 [mouse] Setting baudrate to 111600 bps
2013/12/29 08:08:23 362610 r HD01 [mouse] Calculated work ETU is 8.96 us
2013/12/29 08:08:23 362610 r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)
2013/12/29 08:08:23 362610 r HD01 [mouse] Card responded ok for ifsd request of 251
2013/12/29 08:08:23 31C640 r V14 [mouse] Card type: P1TV
2013/12/29 08:08:23 31C640 r V14 [mouse] Rom version: 20AA
2013/12/29 08:08:23 31C640 r V14 [mouse] parental lock setting: FF FF FF FF
2013/12/29 08:08:23 31C640 r V14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
2013/12/29 08:08:23 31C640 r V14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2013/12/29 08:08:23 31C640 r V14 [mouse] ready for requests
2013/12/29 08:08:23 31C640 r V14 [mouse] found card system videoguard2
2013/12/29 08:08:23 31C640 r V14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2013/12/29 08:08:23 31C640 r V14 [videoguard2] card detected
2013/12/29 08:08:23 31C640 r V14 [videoguard2] type: VideoGuard Sky Germany (098C)
2013/12/29 08:08:23 31C640 r V14 [videoguard2] tier: 0056, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:23 31C640 r V14 [videoguard2] tier: 005d, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:23 31C640 r V14 [videoguard2] tier: 005e, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:23 31C640 r V14 [videoguard2] tier: 007b, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:23 31C640 r V14 [videoguard2] tier: 007d, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:23 31C640 r V14 [videoguard2] tier: 0081, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:23 31C640 r V14 [videoguard2] tier: 008e, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00c0, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00c7, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00c8, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00c9, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00ca, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00e4, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00e5, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00f3, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 31C640 r V14 [videoguard2] tier: 00fa, expiry date: 2014/04/26-01:00:00
2013/12/29 08:08:24 362610 r HD01 [mouse] detect native nagra card
2013/12/29 08:08:24 362610 r HD01 [mouse] found card system nagra
2013/12/29 08:08:24 362610 r HD01 [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2013/12/29 08:08:24 362610 r HD01 [nagra] ROM: D N A S P 1 4 2
2013/12/29 08:08:24 362610 r HD01 [nagra] REV: R e v G C 6
2013/12/29 08:08:24 362610 r HD01 [nagra] SER: ############
2013/12/29 08:08:24 362610 r HD01 [nagra] CAID: 1830
2013/12/29 08:08:24 362610 r HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2013/12/29 08:08:24 362610 r HD01 [nagra] Prv.ID: 00 00 00 00
2013/12/29 08:08:25 362610 r HD01 [nagra] IRD ID: ############
2013/12/29 08:08:25 362610 r HD01 [nagra] active to: 2014/02/18 11:59
2013/12/29 08:08:25 362610 r HD01 [nagra] -----------------------------------------
2013/12/29 08:08:25 362610 r HD01 [nagra] |id |tier |valid from |valid to |
2013/12/29 08:08:25 362610 r HD01 [nagra] +----+--------+------------+------------+
2013/12/29 08:08:25 362610 r HD01 [nagra] |8011|0064 |2013/11/26 |2014/11/27 |
2013/12/29 08:08:25 362610 r HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2013/12/29 08:08:25 362610 r HD01 [nagra] -----------------------------------------
2013/12/29 08:08:25 362610 r HD01 [nagra] ready for requests
2013/12/29 08:08:25 0 s init for all local cards done

2. um oscam lauffähig zu machen werden die oscam.conf,-.server,-.user benötigt
du hast die oscam.conf gepostet, nur mit der datei wird kein system laufen

3. spoiler verwenden bitte
Wie verwende ich Spoiler

Antworten, erweitert. Oben rechts im Menü findet ihr Spoiler. Damit werden die Beiträge nicht so riesen lang.
Spoiler anlicken,2x Enter drücken , Die kopierten Sachen dort einfügen

Du musst angemeldet sein, um Bilder zu sehen.
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Hier die Oscam Config:

[global]
logfile = /tmp/oscam.log;stdout
nice = -1
WaitForCards = 1
preferlocalcards = 1
maxlogsize = 256


saveinithistory = 1
[webif]
HttpPort = 8888
htthelplang = de
HttpUser =
HttpPWD =
HttpRefresh = 60
HttpAllowed = 192.168.1.1-192.168.255.255
HttpReadOnly = 0


[dvbapi]
Enabled = 1
Boxtype = dreambox
User = dvbapi
decodeforever = 1
AU = 1

Oscam Server:
[reader]
label = ORFIce
protocol = internal
device = /dev/sci1
detect = CD
cardmhz = 368
caid = 0D95
boxid = 12345678
group = 1
emmcache = 1,1,2


[reader]
label = S02
protocol = internal
device = /dev/sci0
detect = CD
ecmwhitelist = 1702:93;1833:89
mhz = 600
cardmhz = 600
caid = 1702,1833
boxkey = 1122334455667788
group = 1
emmcache = 1,3,2


blockemm-unknown = 1

Osacm User:
[account]
User = dvbapi
AU = 1
betatunnel = 1833.FFFF:1702
Group = 1
[account]
User = chris
Pwd = chris
AU = 1
Group = 1

Logfile:
>> OSCam << cardserver log switched at Sun Dec 29 09:35:11 2013
-------------------------------------------------------------------------------
2013/12/29 09:35:11 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:11 0 >> OSCam << cardserver log switched, version 1.20-EMU-Version, build r9087 (mipsel-unknown-linux-gnu)
2013/12/29 09:35:11 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:12 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:12 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:12 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:12 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:12 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:12 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:13 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:13 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:13 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:13 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:13 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:13 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:14 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:14 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:14 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:14 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:14 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:15 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:15 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:15 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:15 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:15 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:15 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:15 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:16 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:16 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:16 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:16 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:16 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:16 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:17 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:17 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:17 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:17 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:17 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:17 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:18 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:18 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:18 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:18 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:18 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:18 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:18 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:18 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:19 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:19 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:19 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:19 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:19 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:19 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:20 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:20 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:20 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:20 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:20 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:20 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:21 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:21 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:21 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:21 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:21 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:21 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:22 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:22 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:22 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:22 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:22 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:22 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:22 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:22 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:23 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:23 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:23 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:23 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:23 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:23 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:24 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:24 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:24 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:24 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:24 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:24 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:25 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:25 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:25 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:25 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:25 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:25 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:25 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:25 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:26 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:26 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:26 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:26 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:26 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:26 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:27 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:27 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:27 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:27 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:27 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:27 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:28 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:28 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:28 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:28 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:28 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:28 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:28 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:28 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:29 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:29 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:29 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:29 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:29 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:29 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:30 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:30 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:30 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:30 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:30 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:30 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:31 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:31 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:31 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:31 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:31 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:31 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:32 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:32 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:32 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:32 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:32 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:32 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:32 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:32 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/29 09:35:33 542F50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2013/12/29 09:35:33 542F50 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
Vielen Dank für deine Bemühungen
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

....immer noch kein startlog..........
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Im WebIf - File - Logfile steht nichts anderes als vorher beschrieben.

Nach einem Oscam Neustart übers WebIf erscheint unter Status diese Meldung:

2013/12/29 10:25:08 52D570 r ORFIce [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/12/29 10:25:08 52D570 r ORFIce [internal] Calculated work ETU is 37.20 us reader mhz = 500
2013/12/29 10:25:08 52D570 r ORFIce [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/29 10:25:08 52F300 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2013/12/29 10:25:08 52F300 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/12/29 10:25:08 52F300 r S02 [internal] Calculated work ETU is 93.00 us reader mhz = 600
2013/12/29 10:25:08 52F300 r S02 [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2013/12/29 10:25:09 52D570 r ORFIce [internal] card detected
2013/12/29 10:25:09 52D570 r ORFIce [internal] type: CryptoWorks
2013/12/29 10:25:09 52F300 r S02 [internal] detect irdeto tunneled nagra card
2013/12/29 10:25:09 52F300 r S02 [internal] no rsa key configured -> using irdeto mode
2013/12/29 10:25:09 52F300 r S02 [internal] detect irdeto card
2013/12/29 10:25:09 52D570 r ORFIce [internal] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
2013/12/29 10:25:09 52D570 r ORFIce [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2013/12/29 10:25:09 52D570 r ORFIce [internal] providers: 4 (04,08,0C,10)
2013/12/29 10:25:09 52D570 r ORFIce [internal] found card system cryptoworks
2013/12/29 10:25:09 52D570 r ORFIce [cryptoworks] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2013/12/29 10:25:09 52D570 r ORFIce [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2013/12/29 10:25:09 52D570 r ORFIce [cryptoworks] chid: 000D, date: 2012/12/08 - 2013/01/07, name: Product 000D
2013/12/29 10:25:09 52D570 r ORFIce [cryptoworks] chid: 0002, date: 2013/12/22 - 2014/08/29, name: Product 0002
2013/12/29 10:25:09 52D570 r ORFIce [cryptoworks] chid: FFE0, date: 2013/12/18 - 2014/08/25, name: Product FFE0
2013/12/29 10:25:09 52D570 r ORFIce [cryptoworks] chid: 7FFB, date: 2013/12/27 - 2014/01/26, name: Product 7FFB
2013/12/29 10:25:09 52D570 r ORFIce [cryptoworks] chid: 0001, date: 2013/12/28 - 2014/09/04, name: Product 0001
2013/12/29 10:25:10 52D570 r ORFIce [cryptoworks] chid: FFD8, date: 2013/12/08 - 2014/01/07, name: Product FFD8
2013/12/29 10:25:10 52D570 r ORFIce [cryptoworks] chid: 7FF7, date: 2013/12/21 - 2013/12/31, name: Product 7FF7
2013/12/29 10:25:10 52D570 r ORFIce [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2013/12/29 10:25:10 52D570 r ORFIce [cryptoworks] chid: 001D, date: 2013/08/06 - 2013/11/06, name: Product 001D
2013/12/29 10:25:10 52D570 r ORFIce [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2013/12/29 10:25:10 52D570 r ORFIce [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2013/12/29 10:25:10 52D570 r ORFIce [cryptoworks] ready for requests
2013/12/29 10:25:13 52F300 r S02 [internal] card system not supported
2013/12/29 10:25:13 52F300 r S02 [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/29 10:25:14 52F300 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2013/12/29 10:25:14 52F300 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/12/29 10:25:14 52F300 r S02 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2013/12/29 10:25:14 52F300 r S02 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2013/12/29 10:25:15 52F300 r S02 [internal] detect irdeto tunneled nagra card
2013/12/29 10:25:15 52F300 r S02 [internal] no rsa key configured -> using irdeto mode
2013/12/29 10:25:15 52F300 r S02 [internal] detect irdeto card
 
Zuletzt bearbeitet:
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

probiers mal auch so
Code: 
[COLOR=#333333][reader][/COLOR]
[COLOR=#333333]label = S02[/COLOR]
[COLOR=#333333]enable = 1[/COLOR]
[COLOR=#333333]protocol = internal [/COLOR]
[COLOR=#333333]device = /dev/sci0 [/COLOR]
[COLOR=#333333]caid = 1702,1833[/COLOR]
[COLOR=#333333]boxid = [/COLOR][URL="tel:12345678"]12345678[/URL]
[COLOR=#333333]detect = CD[/COLOR]
[COLOR=#333333]mhz = 600 [/COLOR]
[COLOR=#333333]cardmhz = 600[/COLOR]
[COLOR=#333333]group = 1 [/COLOR]
[COLOR=#333333]emmcache = 1,1,2[/COLOR]
oder auch mal nur die S02 in anderem kartenslot stecken, device auf dev/sci1 ändern
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Hat leider nichts gebracht. Hab beides probiert.
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

nimm mal die orf karte raus oder deaktiviere den reader per oscam webif
und poste wirklich endlich mal ein log, bis der erste sender entschlüsselt werden soll,
oben hört log da auf, wo es erst anfängt interessant zu werden
 
AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Die S02 läuft im xtrend nicht im internen Schacht , soweit ich mich erinnern kann musste dazu eine easymouse 2 extern via USB benutzen ! Evtl je nach Image musste dann noch die fti USB Serial Treiber ins Image einbauen ! Kommt eben aufs Image an !

Gruß Bodo


Sent from my iPhone using
Sie müssen registriert sein, um Links zu sehen.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

K
gelöst Dreambox One - Oscam Server mit Client verbinden
Antworten
13
Aufrufe
5K
m0bbed
M
N
Oscam verhunzt nach Software-Update
Antworten
5
Aufrufe
1K
salidos
S
H
  • Gesperrt
HD+ hell, Sky dunkel, Log meldet "not found"... was kann ich noch tun?
Antworten
10
Aufrufe
3K
hutzlerfoogy
H
S
ORF dunkel P410 EMM OK ECM NOK
Antworten
7
Aufrufe
2K
gyurma
G
B
gelöst Regelmäßige Probleme mit OSCAM in Verbindung mit ORF ICE oder HDPlus
Antworten
14
Aufrufe
3K
BeautifulDay
B
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…