Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

[chrisbond]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Über Cccam läuft die S02 im internen Schacht. Home Cs funktioniert mit dem Opti - habe aber ständig Freezer und deshalb möchte ich auf Oscam umstellen.

 

[master750]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

caid = 1702,1833

mach mal ohne 1833



reader]
label = S02
enable = 1
protocol = internal
device = /dev/sci0
caid = 1702
ident = 1702:000000
boxid =
detect = CD
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2


betatunnel = 1833.FFFF:1702 würde ich auch nicht machen

 

[chrisbond]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Danke für deine Antwort. Ich werde es zu Mittag probieren.

 

[master750]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

no rsa key configured steht bei dir auch wegen der 1833

lass sie auf 1702 und alles ist gut

 

[Bodo-1]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

@Master750

in Oscam braucht er aber die 1833

Die Sky HD Sat-Sender werden nur mit der 1833 verschlüsselt. CCcam hat einen Autobetatunnel von 1833 auf 1702. Darum bekommen CCcam User davon nichts mit.

Gruss Bodo

 

[chrisbond]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Es funkt nicht. Mit der Einstellung von Master750 funkt nicht mal die ORF Ice. Sie wird nicht mehr erkannt.

 

[dodo83]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

nimm mal die orf karte raus oder deaktiviere den reader per oscam webif
und poste wirklich endlich mal ein log, bis der erste sender entschlüsselt werden soll,
oben hört log da auf, wo es erst anfängt interessant zu werden

mach es mal so bitte wie hier vorgeschlagen

 

[chrisbond]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Hier ist das LOG

Spoiler

2013/12/30 12:41:25 0 s >> OSCam << cardserver started, version 1.20-EMU-Version, build r9087 (mipsel-unknown-linux-gnu)
2013/12/30 12:41:25 0 s creating pidfile /tmp/oscam.pid with pid 26923
2013/12/30 12:41:25 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/12/30 12:41:25 0 s signal handling initialized
2013/12/30 12:41:25 0 s 164 service-id's loaded in 4ms
2013/12/30 12:41:25 0 s 10 provid's loaded
2013/12/30 12:41:25 0 s S02 [internal] creating thread for device /dev/sci0
2013/12/30 12:41:25 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/30 12:41:25 0 s waiting for local card init
2013/12/30 12:41:25 52D600 r S02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2013/12/30 12:41:25 52F300 h webif: decompressed 54537 bytes back into 155148 bytes
2013/12/30 12:41:25 52F300 h HTTP Server running. ip=0.0.0.0 port=8888
2013/12/30 12:41:26 52D600 r S02 [internal] card detected
2013/12/30 12:41:27 52D600 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2013/12/30 12:41:27 52D600 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/12/30 12:41:27 52D600 r S02 [internal] Calculated work ETU is 93.00 us reader mhz = 600
2013/12/30 12:41:27 52D600 r S02 [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2013/12/30 12:41:28 52D600 r S02 [internal] detect irdeto tunneled nagra card
2013/12/30 12:41:28 52D600 r S02 [internal] no rsa key configured -> using irdeto mode
2013/12/30 12:41:28 52D600 r S02 [internal] detect irdeto card
2013/12/30 12:42:23 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:23 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:23 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:24 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:24 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:24 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:24 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:24 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:24 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:25 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:25 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:25 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:25 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:25 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:25 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:26 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:26 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:26 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:26 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:26 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:26 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:26 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:26 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:27 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:27 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:27 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:27 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:27 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:27 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:28 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:28 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:28 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:28 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:42:28 772007F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:42:28 772007F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

Oder ist es das:

Spoiler

>> OSCam << cardserver started at Mon Dec 30 12:40:30 2013
-------------------------------------------------------------------------------
2013/12/30 12:40:30 0 s >> OSCam << cardserver started, version 1.20-EMU-Version, build r9087 (mipsel-unknown-linux-gnu)
2013/12/30 12:40:30 0 s creating pidfile /tmp/oscam.pid with pid 26813
2013/12/30 12:40:30 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/12/30 12:40:30 0 s signal handling initialized
2013/12/30 12:40:30 0 s 164 service-id's loaded in 4ms
2013/12/30 12:40:30 0 s 10 provid's loaded
2013/12/30 12:40:30 0 s ORFIce [internal] creating thread for device /dev/sci1
2013/12/30 12:40:30 0 s S02 [internal] creating thread for device /dev/sci0
2013/12/30 12:40:30 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/30 12:40:30 0 s waiting for local card init
2013/12/30 12:40:30 52F390 r S02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2013/12/30 12:40:30 52D600 r ORFIce [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=368)
2013/12/30 12:40:30 53C0A0 h webif: decompressed 54537 bytes back into 155148 bytes
2013/12/30 12:40:30 53C0A0 h HTTP Server running. ip=0.0.0.0 port=8888
2013/12/30 12:40:31 52F390 r S02 [internal] card detected
2013/12/30 12:40:31 52D600 r ORFIce [internal] card detected
2013/12/30 12:40:31 52D600 r ORFIce [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2013/12/30 12:40:31 52D600 r ORFIce [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/12/30 12:40:31 52D600 r ORFIce [internal] Calculated work ETU is 37.20 us reader mhz = 500
2013/12/30 12:40:31 52D600 r ORFIce [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 12:40:31 52F390 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2013/12/30 12:40:31 52F390 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/12/30 12:40:31 52F390 r S02 [internal] Calculated work ETU is 93.00 us reader mhz = 600
2013/12/30 12:40:31 52F390 r S02 [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2013/12/30 12:40:32 52D600 r ORFIce [internal] card detected
2013/12/30 12:40:32 52D600 r ORFIce [internal] type: CryptoWorks
2013/12/30 12:40:32 52F390 r S02 [internal] detect irdeto tunneled nagra card
2013/12/30 12:40:32 52F390 r S02 [internal] no rsa key configured -> using irdeto mode
2013/12/30 12:40:32 52F390 r S02 [internal] detect irdeto card
2013/12/30 12:40:32 52D600 r ORFIce [internal] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
2013/12/30 12:40:32 52D600 r ORFIce [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2013/12/30 12:40:32 52D600 r ORFIce [internal] providers: 4 (04,08,0C,10)
2013/12/30 12:40:32 52D600 r ORFIce [internal] found card system cryptoworks
2013/12/30 12:40:32 52D600 r ORFIce [cryptoworks] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2013/12/30 12:40:32 52D600 r ORFIce [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2013/12/30 12:40:32 52D600 r ORFIce [cryptoworks] chid: 000D, date: 2012/12/08 - 2013/01/07, name: Product 000D
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] chid: 0002, date: 2013/12/22 - 2014/08/29, name: Product 0002
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] chid: FFE0, date: 2013/12/18 - 2014/08/25, name: Product FFE0
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] chid: 7FFB, date: 2013/12/27 - 2014/01/26, name: Product 7FFB
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] chid: 0001, date: 2013/12/28 - 2014/09/04, name: Product 0001
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] chid: FFD8, date: 2013/12/08 - 2014/01/07, name: Product FFD8
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] chid: 7FF7, date: 2013/12/21 - 2013/12/31, name: Product 7FF7
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] chid: 001D, date: 2013/08/06 - 2013/11/06, name: Product 001D
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2013/12/30 12:40:33 52D600 r ORFIce [cryptoworks] ready for requests
2013/12/30 12:40:36 52F390 r S02 [internal] card system not supported
2013/12/30 12:40:36 52F390 r S02 [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/30 12:40:37 52F390 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2013/12/30 12:40:37 52F390 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/12/30 12:40:37 52F390 r S02 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2013/12/30 12:40:37 52F390 r S02 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2013/12/30 12:40:38 52F390 r S02 [internal] detect irdeto tunneled nagra card
2013/12/30 12:40:38 52F390 r S02 [internal] no rsa key configured -> using irdeto mode
2013/12/30 12:40:38 52F390 r S02 [internal] detect irdeto card
2013/12/30 12:40:41 52F390 r S02 [internal] card system not supported
2013/12/30 12:40:41 52F390 r S02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/12/30 12:40:41 52F390 r S02 [internal] card initializing error
2013/12/30 12:40:41 0 s init for all local cards done
2013/12/30 12:40:41 0 s anti cascading disabled
2013/12/30 12:40:41 542F38 c plain dvbapi-client granted (dvbapi, au=auto (2 reader))
2013/12/30 12:40:41 542F38 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2013/12/30 12:40:45 542F38 c [DVBAPI] Receiver sends PMT command 3 for channel 0008
2013/12/30 12:40:45 542F38 c [DVBAPI] Receiver wants to demux srvid 0008 on adapter 0000 camask 0001 index 0000
2013/12/30 12:40:45 542F38 c [ADD PID 0] CAID: 1702 ECM_PID: 1718 PROVID: 000000
2013/12/30 12:40:45 542F38 c [ADD PID 1] CAID: 1833 ECM_PID: 1818 PROVID: 000000
2013/12/30 12:40:45 542F38 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B18 PROVID: 000000
2013/12/30 12:40:45 542F38 c [ADD PID 3] CAID: 09AF ECM_PID: 1F18 PROVID: 000000
2013/12/30 12:40:45 542F38 c [ADD PID 4] CAID: 098C ECM_PID: 1A18 PROVID: 000000
2013/12/30 12:40:45 542F38 c Found 5 ECMpids and 4 STREAMpids in PMT
2013/12/30 12:40:45 542F38 c [DVBAPI] Receiver wants to demux srvid 0008 on adapter 0000 camask 0001 index 0000
2013/12/30 12:40:45 542F38 c New program number: 0008 (1702:0008 unknown) [pmt_list_management 3]
2013/12/30 12:40:45 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:45 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:45 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:45 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:45 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:46 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:46 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:46 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:46 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:46 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:46 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:46 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:46 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:47 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:47 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:47 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:47 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:47 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:47 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:48 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:48 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:48 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:48 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:49 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:49 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:49 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:49 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:49 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:49 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:49 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:49 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:50 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:50 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:50 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:50 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:50 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:50 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:51 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/12/30 12:40:51 542F38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/12/30 12:40:51 542F38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

Hier ein LOG mit ORF Ice:

Spoiler

>> OSCam << cardserver started at Mon Dec 30 12:46:27 2013
-------------------------------------------------------------------------------
2013/12/30 12:46:27 0 s >> OSCam << cardserver started, version 1.20-EMU-Version, build r9087 (mipsel-unknown-linux-gnu)
2013/12/30 12:46:27 0 s creating pidfile /tmp/oscam.pid with pid 27237
2013/12/30 12:46:27 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/12/30 12:46:27 0 s signal handling initialized
2013/12/30 12:46:27 0 s 164 service-id's loaded in 6ms
2013/12/30 12:46:27 0 s 10 provid's loaded
2013/12/30 12:46:27 0 s ORFIce [internal] creating thread for device /dev/sci1
2013/12/30 12:46:27 0 s S02 [internal] creating thread for device /dev/sci0
2013/12/30 12:46:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/30 12:46:27 52D600 r ORFIce [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=368)
2013/12/30 12:46:27 0 s waiting for local card init
2013/12/30 12:46:27 52F300 h webif: decompressed 54537 bytes back into 155148 bytes
2013/12/30 12:46:27 53CEC8 r S02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2013/12/30 12:46:27 52F300 h HTTP Server running. ip=0.0.0.0 port=8888
2013/12/30 12:46:28 53CEC8 r S02 [internal] card detected
2013/12/30 12:46:28 52D600 r ORFIce [internal] card detected
2013/12/30 12:46:28 52D600 r ORFIce [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2013/12/30 12:46:28 52D600 r ORFIce [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/12/30 12:46:28 52D600 r ORFIce [internal] Calculated work ETU is 37.20 us reader mhz = 500
2013/12/30 12:46:28 52D600 r ORFIce [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/12/30 12:46:28 53CEC8 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2013/12/30 12:46:28 53CEC8 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/12/30 12:46:28 53CEC8 r S02 [internal] Calculated work ETU is 93.00 us reader mhz = 600
2013/12/30 12:46:28 53CEC8 r S02 [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2013/12/30 12:46:29 52D600 r ORFIce [internal] card detected
2013/12/30 12:46:29 52D600 r ORFIce [internal] type: CryptoWorks
2013/12/30 12:46:29 53CEC8 r S02 [internal] detect irdeto tunneled nagra card
2013/12/30 12:46:29 53CEC8 r S02 [internal] no rsa key configured -> using irdeto mode
2013/12/30 12:46:29 53CEC8 r S02 [internal] detect irdeto card
2013/12/30 12:46:29 52D600 r ORFIce [internal] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
2013/12/30 12:46:30 52D600 r ORFIce [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2013/12/30 12:46:30 52D600 r ORFIce [internal] providers: 4 (04,08,0C,10)
2013/12/30 12:46:30 52D600 r ORFIce [internal] found card system cryptoworks
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] chid: 000D, date: 2012/12/08 - 2013/01/07, name: Product 000D
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] chid: 0002, date: 2013/12/22 - 2014/08/29, name: Product 0002
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] chid: FFE0, date: 2013/12/18 - 2014/08/25, name: Product FFE0
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] chid: 7FFB, date: 2013/12/27 - 2014/01/26, name: Product 7FFB
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] chid: 0001, date: 2013/12/28 - 2014/09/04, name: Product 0001
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] chid: FFD8, date: 2013/12/08 - 2014/01/07, name: Product FFD8
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] chid: 7FF7, date: 2013/12/21 - 2013/12/31, name: Product 7FF7
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] chid: 001D, date: 2013/08/06 - 2013/11/06, name: Product 001D
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2013/12/30 12:46:30 52D600 r ORFIce [cryptoworks] ready for requests
2013/12/30 12:46:34 53CEC8 r S02 [internal] card system not supported
2013/12/30 12:46:34 53CEC8 r S02 [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/30 12:46:34 53CEC8 r S02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2013/12/30 12:46:34 53CEC8 r S02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/12/30 12:46:34 53CEC8 r S02 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2013/12/30 12:46:34 53CEC8 r S02 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2013/12/30 12:46:35 53CEC8 r S02 [internal] detect irdeto tunneled nagra card
2013/12/30 12:46:35 53CEC8 r S02 [internal] no rsa key configured -> using irdeto mode
2013/12/30 12:46:35 53CEC8 r S02 [internal] detect irdeto card
2013/12/30 12:46:38 53CEC8 r S02 [internal] card system not supported
2013/12/30 12:46:38 53CEC8 r S02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/12/30 12:46:38 53CEC8 r S02 [internal] card initializing error
2013/12/30 12:46:39 0 s init for all local cards done
2013/12/30 12:46:39 0 s anti cascading disabled
2013/12/30 12:46:39 543000 c plain dvbapi-client granted (dvbapi, au=auto (2 reader))
2013/12/30 12:46:39 543000 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

 

[dodo83]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

hast du es schon mit einer anderen oscam version probiert, mit der cccam sagst du läuft die s02, oder per externen reader probieren ob es mit oscam läuft

würde es gerne selber probieren aber meine S02 kommt erst nach neujahr dann probier ich die in der Xtrend intern und extern

 

[chrisbond]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Mit einer anderen Oscam hab ichs nicht probiert. Mit der Cccam läuft sie ohne Probleme.

 

[dodo83]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

probier mal mit einer 8XXXer version, schaden wird es nicht
oder mit einem externen reader

oder nimm mal den force_irdeto eintrag mit rein

[reader]
label                         = S02
enable                        = 0
protocol                      = internal
device                        = /dev/sci0
caid                          = 1702,1833
boxid                         = 12345678
[COLOR=#ff0000]force_irdeto                  = 1[/COLOR]
detect                        = cd
mhz                           = 600
cardmhz                       = 600
group                         = 2
emmcache                      = 1,1,2

 

[chrisbond]

AW: Xtrend Et4000 - mit Oscam wird Sky S02 nicht hell, ORF Ice sehr wohl

Geht leider nicht.