Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

gelöst Was genau muss bei SYMLINK+ eingetragen ? Was genau bedeutet das ?

    Nobody is reading this thread right now.
  • 2019/05/10 21:36:22 13873FEC r (reader) HD01 [mouse] ERROR: Opening device /dev/HD01 (errno=2 No such file or directory)
  • 2019/05/10 21:36:22 13873FEC r (reader) HD01 [mouse] Cannot open device: /dev/HD01
 
Hast du die Kiste nach den Änderungen auch mal neugestartet? Die serial stimmt mit der deines Readers überein?
Poste mal die Ausgabe von
Code:
ls -la /dev | grep ttyUSB*
und
Code:
lsusb -v
 
Hier mal die Info

Code:
root@debian ~ > ls -la /dev | grep ttyUSB*
lrwxrwxrwx 1 root root 7 Mai 10 21:47 HD01 -> ttyUSB0
crw-rw---- 1 root dialout 188, 0 Mai 10 21:47 ttyUSB0
root@debian ~ > lsusb -v

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.16
iManufacturer 3 Linux 3.16.0-8-686-pae ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:10.4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0001
Self Powered

Bus 005 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x076b OmniKey AG
idProduct 0x3021 CardMan 3121
bcdDevice 3.02
iManufacturer 1 OMNIKEY AG
iProduct 2 Smart Card Reader USB
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3 CCID
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 7 5.0V 3.0V 1.8V
dwProtocols 3 T=0 T=1
dwDefaultClock 4800
dwMaxiumumClock 8000
bNumClockSupported 4
dwDataRate 10752 bps
dwMaxDataRate 412903 bps
bNumDataRatesSupp. 106
dwMaxIFSD 254
dwSyncProtocols 00000007 2-wire 3-wire I2C
dwMechanical 00000000
dwFeatures 000207B2
Auto configuration based on ATR
Auto clock change
Auto baud rate change
Auto PPS made by CCID
CCID can set ICC in clock stop mode
NAD value other than 0x00 accepted
Auto IFSD exchange
Short APDU level exchange
dwMaxCCIDMsgLen 271
bClassGetResponse echo
bClassEnvelope echo
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 24
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.16
iManufacturer 3 Linux 3.16.0-8-686-pae uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0300 lowspeed power
Device Status: 0x0001
Self Powered

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.16
iManufacturer 3 Linux 3.16.0-8-686-pae uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0300 lowspeed power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.16
iManufacturer 3 Linux 3.16.0-8-686-pae uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0300 lowspeed power
Port 2: 0000.0300 lowspeed power
Device Status: 0x0001
Self Powered

Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6001 FT232 USB-Serial (UART) IC
bcdDevice 6.00
iManufacturer 1 FTDI
iProduct 2 FT232R USB UART
iSerial 3 A6032Q20
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 90mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 FT232R USB UART
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.16
iManufacturer 3 Linux 3.16.0-8-686-pae uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0300 lowspeed power
Device Status: 0x0001
Self Powered
root@debian ~ >
Gesendet von iPhone mit Tapatalk
 
Zuletzt bearbeitet von einem Moderator:
@tecfreak und @Alex .
Neustart hatte ich vergessen
Habe nun folgende Einstellung :

[reader]
label = HD01
description = HD01
protocol = mouse
device = /dev/HD01
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 600
group = 3
emmcache = 1,2,6,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

in der Rules Datei steht:

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A6032Q20", SYMLINK+="HD01", RUN+="/bin/setserial /dev/HD01 low_latency"

Im OSCAM Log steht folgendes:
  • 2019/05/11 06:56:49 5799A099 r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=600, cardmhz=357)
  • 2019/05/11 06:56:49 5799A099 r (reader) HD01 [mouse] card detected
  • 2019/05/11 06:56:50 5799A099 r (reader) HD01 [mouse] ATR: sag ich nicht 12345678
  • 2019/05/11 06:56:50 5799A099 r (reader) HD01 [mouse] Setting baudrate to 187500 bps
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [mouse] detect native nagra card
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [mouse] ready for requests
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [mouse] found card system nagra
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] ROM: D N A S P 1 4 2
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] REV: R e v G C 6
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] SER: ############
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] CAID: 1830
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] Prv.ID: 00 00 00 00
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] IRD ID: ############
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] active to: 2019/06/30 12:59
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] -----------------------------------------
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] |id |tier |valid from |valid to |
  • 2019/05/11 06:56:52 5799A099 r (reader) HD01 [nagra] +----+--------+------------+------------+
  • 2019/05/11 06:56:53 5799A099 r (reader) HD01 [nagra] |8011|0BB8 |2015/09/09 |2019/06/26 |
  • 2019/05/11 06:56:53 5799A099 r (reader) HD01 [nagra] -----------------------------------------


Die Jumper auf dem Reader sind wie folgt eingestellt: 5 V - Phönix - Pfeil - 6 Mhz


bei Set Serials kommt das
root@debian ~ > setserial /dev/ttyUSB*
/dev/ttyUSB0, UART: unknown, Port: 0x0000, IRQ: 0, Flags: spd_cust low_latency
bzw das

root@debian ~ > setserial /dev/HD01
/dev/HD01, UART: unknown, Port: 0x0000, IRQ: 0, Flags: spd_cust low_latency

Müsste jetzt passen oder ? Die Zeiten liegen jetzt so zwischen 300 und 320 . Waren vorher zwischen 390 und teilweise 600 . Danke @Alex und @tecfreak
:grinning:
 
Zuletzt bearbeitet:
Zurück
Oben