V14 Aktivierung, DVBapi Problem

[vollgass]

möchte meine V14 Karte in einer Vu+ freischalten lassen und empfange keine Emm´s.Bei Sky habe ich die Karte freischalten lassen.
Hier meine Logs

Spoiler

2014/07/10 16:45:32 77A02460 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/07/10 16:45:33 77A02460 c anonymous (098C&000000/0C20/006C/98:F477EAC2A9D95F7C203701A32DC083F9): not found (11 ms) by V14
2014/07/10 16:45:33 77A02460 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/10 16:45:33 77A02460 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/07/10 16:45:34 77A02460 c anonymous (098C&000000/0C20/006C/98:F477EAC2A9D95F7C203701A32DC083F9): not found (10 ms) by V14
2014/07/10 16:45:34 77A02460 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/10 16:45:34 77A02460 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/07/10 16:45:35 77A02460 c anonymous (098C&000000/0C20/006C/98:F477EAC2A9D95F7C203701A32DC083F9): not found (10 ms) by V14
2014/07/10 16:45:35 77A02460 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/10 16:45:35 77A02460 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/07/10 16:45:35 77A02460 c anonymous (098C&000000/0C20/006C/98:F477EAC2A9D95F7C203701A32DC083F9): not found (10 ms) by V14
2014/07/10 16:45:36 77A02460 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/10 16:45:36 77A02460 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/07/10 16:45:36 77A02460 c anonymous (098C&000000/0C20/006C/98:F477EAC2A9D95F7C203701A32DC083F9): not found (10 ms) by V14
2014/07/10 16:45:37 77A02460 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/10 16:45:37 77A02460 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/07/10 16:45:37 77A00468 r V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2014/07/10 16:45:37 77A00468 r V14 [videoguard2] classD3 ins54: no cw --> Card is paired
2014/07/10 16:45:37 77A02460 c anonymous (098C&000000/0C20/006C/98:F477EAC2A9D95F7C203701A32DC083F9): not found (110 ms) by V14
2014/07/10 16:45:38 77A02460 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
switch log file

oscam.config
[global]
logfile = /etc/tuxbox/config/log.log
disableuserfile = 0
maxlogsize = 500
usrfile = /etc/tuxbox/config/
cwlogdir = /etc/tuxbox/config/
emmlogdir = /etc/tuxbox/config/
[cache]

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = Vuplus
[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.255.255
hideclient_to = 15 [global]

oscam server
[reader]
label = V14
protocol = internal
device = /dev/sci0
services = skyall
caid = 098C
boxid = 12345678
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

 

[dodo83]

AW: Freischaltung der "neuen" V14 mit OScam

hi,
den boxtype

[COLOR=#333333]boxtype = Vuplus[/COLOR]

gibt es nicht zur Auswahl
änder mal auf

[COLOR=#333333]boxtype = dreambox[/COLOR]

dein User wird im log als Anonymous angezeigt, heisst dein Account in der oscam.user passt zum DVBapi abschnitt in der oscam.conf nicht, deswegen geht kein AU, poste bitte die oscam.user

 

[vollgass]

AW: Freischaltung der "neuen" V14 mit OScam

mein user
[account]
user = lokal
au = V14
group = 1

 

[dodo83]

AW: Freischaltung der "neuen" V14 mit OScam

das ist komisch den hier

2014/07/10 16:45:33 77A02460 c anonymous (098C&000000/0C20/006C/98:F477EAC2A9D95F7C203701A32DC083F9): not found (11 ms) by V14

wird der nicht erkannt

lösche diesen mal und mach den neu einrichten per WebIF
danach OScam neu starten, ganzes start log posten

 

[vollgass]

AW: Freischaltung der "neuen" V14 mit OScam

jetzt habe ich mal einen neustart gemacht.den User habe ich mal auf test geändert
hier der log

Spoiler

2014/07/10 17:44:43 0 s >> OSCam << cardserver started, version 1.20-unstable-patch, build r9785 (mipsel-unknown-linux-gnu)
2014/07/10 17:44:43 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 29873
2014/07/10 17:44:43 0 s couldn't open statistics file: /etc/tuxbox/config/
2014/07/10 17:44:43 0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2014/07/10 17:44:43 0 s signal handling initialized
2014/07/10 17:44:43 0 s V14 [internal] creating thread for device /dev/sci0
2014/07/10 17:44:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/07/10 17:44:43 0 s waiting for local card init
2014/07/10 17:44:43 55C780 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/07/10 17:44:43 558DF0 h webif: decompressed 152453 bytes back into 365344 bytes
2014/07/10 17:44:43 558DF0 h HTTP Server running. ip=0.0.0.0 port=8888
2014/07/10 17:44:44 55C780 r V14 [internal] card detected
2014/07/10 17:44:45 55C780 r V14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxx
2014/07/10 17:44:45 55C780 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/07/10 17:44:45 55C780 r V14 [internal] TEST tempo mhz check = 500 mhz
2014/07/10 17:44:45 55C780 r V14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2014/07/10 17:44:48 55C780 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/07/10 17:44:49 55C780 r V14 [internal] Card type: P1TV
2014/07/10 17:44:49 55C780 r V14 [internal] Rom version: 20AA
2014/07/10 17:44:49 55C780 r V14 [internal] Credit available on card: 0 euro
2014/07/10 17:44:49 55C780 r V14 [internal] Extended 4C detected
2014/07/10 17:44:49 55C780 r V14 [internal] FuseByte: 00
2014/07/10 17:44:49 55C780 r V14 [internal] Region Code:
2014/07/10 17:44:49 55C780 r V14 [internal] Pincode read: 1746
2014/07/10 17:44:49 55C780 r V14 [internal] PCB settings: FF FF FF FF
2014/07/10 17:44:49 55C780 r V14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/07/10 17:44:49 55C780 r V14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/07/10 17:44:49 55C780 r V14 [internal] ready for requests
2014/07/10 17:44:49 55C780 r V14 [internal] found card system videoguard2
2014/07/10 17:44:49 55C780 r V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/07/10 17:44:49 55C780 r V14 [videoguard2] card detected
2014/07/10 17:44:49 55C780 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/07/10 17:44:53 0 s init for all local cards done
2014/07/10 17:44:53 0 s anti cascading disabled
2014/07/10 17:44:53 560290 c plain dvbapi-client granted (anonymous, au=off)
2014/07/10 17:44:53 560290 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/07/10 17:44:54 560290 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2014/07/10 17:44:54 560290 c [ADD PID 1] CAID: 1833 ECM_PID: 1800 PROVID: 000000
2014/07/10 17:44:54 560290 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B00 PROVID: 000000
2014/07/10 17:44:54 560290 c [ADD PID 3] CAID: 09AF ECM_PID: 1F00 PROVID: 000000
2014/07/10 17:44:54 560290 c [ADD PID 4] CAID: 098C ECM_PID: 1A00 PROVID: 000000
2014/07/10 17:44:54 560290 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/07/10 17:44:54 560290 c [DVBAPI] Receiver wants to demux srvid 0011 on adapter 0000 camask 0001 index 0000 pmtpid 0064
2014/07/10 17:44:54 560290 c New program number: 0011 (1702:0011 unknown) [pmt_list_management 3]
2014/07/10 17:44:54 560290 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A00 ANY CHID PMTPID 0064 VPID 00FF
2014/07/10 17:44:54 55C780 r V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2014/07/10 17:44:54 55C780 r V14 [videoguard2] classD3 ins54: no cw --> Card is

so wie es aussieht habe ich mit den logfile auch probleme:
hier die smp log

Spoiler

2014/07/10 16:02:14, 0] /home/linux/oe/vuplus/vuuno/build/tmp/work/mipsel-oe-linux/samba-3.0.37-r0/samba-3.0.37/source/lib/pidfile.cidfile_create(112)
ERROR: smbd is already running. File /var/run/smbd.pid exists and process id 449 is running.

creating pidfile /tmp/.oscam/oscam.pid with pid 29873
2014/07/10 17:44:43 0 s couldn't open statistics file: /etc/tuxbox/config/
2014/07/10 17:44:43 0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2014/07/10 17:44:43 0 s signal handling initialized

2014/07/10 17:44:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat

 

[dodo83]

AW: Freischaltung der "neuen" V14 mit OScam

2014/07/10 17:44:53 560290 c plain dvbapi-client granted (anonymous, au=off)

User habe ich mal auf test geändert

der User muss so aber im DVBapi abschnitt und im Account der oscam.user gleich heissen

 

[vollgass]

das habe ich schon so geändert

jetzt habe eine andere Oscam Version installiert. Bei meiner V14 Karte ist HD Plus auch freigeschaltet.
Wie lautet die DVBAPI ?
Benötige ich dann einen srvid und Services
Was ist da noch falsch?

Hier mein Log

Spoiler

2014/07/11 15:28:39 0 s >> OSCam << cardserver started, version 1.20-unstable-patch, build r9785 (mipsel-newnigma2-linux-gnu)
2014/07/11 15:28:39 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1343
2014/07/11 15:28:39 0 s couldn't open statistics file: /etc/tuxbox/config/
2014/07/11 15:28:39 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/07/11 15:28:39 0 s signal handling initialized
2014/07/11 15:28:39 0 s V14 [internal] creating thread for device /dev/sci0
2014/07/11 15:28:39 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/07/11 15:28:39 0 s waiting for local card init
2014/07/11 15:28:39 533DF0 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/07/11 15:28:39 535C20 h webif: decompressed 152453 bytes back into 365344 bytes
2014/07/11 15:28:39 535C20 h HTTP Server running. ip=0.0.0.0 port=8888
2014/07/11 15:28:40 0 s init for all local cards done
2014/07/11 15:28:40 0 s anti cascading disabled
2014/07/11 15:28:40 53C360 c plain dvbapi-client granted (lokal, au=on (1 reader))
2014/07/11 15:28:40 53C360 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/07/11 15:28:44 53C360 c [ADD PID 0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2014/07/11 15:28:44 53C360 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2014/07/11 15:28:44 53C360 c [ADD PID 2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2014/07/11 15:28:44 53C360 c [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2014/07/11 15:28:44 53C360 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/07/11 15:28:44 53C360 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
2014/07/11 15:28:44 53C360 c New program number: 006C (1833:006C unknown) [pmt_list_management 3]
2014/07/11 15:28:44 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:44 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:45 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:45 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:45 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:46 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:46 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:46 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:47 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:47 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:47 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:47 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:48 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:48 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:48 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:49 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:49 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:49 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:50 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:50 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:50 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:50 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:51 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:51 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:51 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:52 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:52 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/07/11 15:28:52 53C360 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/07/11 15:28:53 53C360 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decod

 

[dodo83]

AW: Freischaltung der "neuen" V14 mit OScam

Wie lautet die DVBAPI ?

jetzt wird der DVBapi als lokal gefunden und angezeigt

deine Karte wird aber im Kartenleser nicht erkannt
mach mal Reader aus, Karte raus, OScam neu start, Karte rein und Reader an
oder mal die Box komplett neu starten ohne Karte im Kartenleser

oder halt erstmal den anderen Kartenleser testen falls vorhanden

 

[dia]

AW: Freischaltung der "neuen" V14 mit OScam

schreib mal die config datein

 

[vollgass]

AW: Freischaltung der "neuen" V14 mit OScam

hier meine configs

Spoiler

Oscam Config
[global]
logfile = /etc/tuxbox/config/log.log
disableuserfile = 0
maxlogsize = 500
usrfile = /etc/tuxbox/config/
cwlogdir = /etc/tuxbox/config/
emmlogdir = /etc/tuxbox/config/
[cache]

[dvbapi]
enabled = 1
au = 1


Oscam Server
[reader]
label = V14
protocol = internal
device = /dev/sci0
services = skyall
caid = 098C
boxid = 12345678
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
ndsversion = 2

User
[account]
user = lokal
au = V14
group = 1
user = lokal
boxtype = dreambox
[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.255.255
hideclient_to = 15

 

[cojo]

AW: Freischaltung der "neuen" V14 mit OScam

Bei der dvb-api hast du kein user und Boxtyp drin,dafür aber bein user,das ist falsch!

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox

----
User
[account]
user = lokal
au = V14
group = 1

nimm auch fürs erste mal Services und co raus,das ist fein tuning und kommt später

 

[femi]

AW: Freischaltung der "neuen" V14 mit OScam

mhz und cardmhz ist auch falsch oder? Da muß doch 367 rein

 

[dodo83]

AW: Freischaltung der "neuen" V14 mit OScam

die Karte wird im Kartenleser nicht erkannt

2014/07/11 15:28:39 0 s V14 [internal] creating thread for device /dev/sci0
2014/07/11 15:28:39 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/07/11 15:28:39 0 s waiting for local card init
2014/07/11 15:28:39 533DF0 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/07/11 15:28:39 535C20 h webif: decompressed 152453 bytes back into 365344 bytes
2014/07/11 15:28:39 535C20 h HTTP Server running. ip=0.0.0.0 port=8888
2014/07/11 15:28:40 0 s init for all local cards done
2014/07/11 15:28:40 0 s anti cascading disabled

daran sollte man erstmal arbeiten

@femi
die sind richtig, bei neuen Versionen und internen Reader muss man die so setzen

EDIT
ich mache mal einen eigenen Thread daraus

 

[dia]

AW: V14 Aktivierung, DVBapi Problem

kannst du da ein cardreader wie esaymouse oder smargo dran machen

 

[vollgass]

AW: V14 Aktivierung, DVBapi Problem

endlich kommen bei mir auch die Emms an.Nur weiß ich jetzt nicht,was ich mit Emms machen muß.Kann mir das einer erklären?
Darf man den Log von den Emms auch hier einstellen?