Umstieg von CCCam auf Oscam

[rantzel]

Hallo,
ich habe eine hd01 und eine V13 und die liefen bisher mit cccam 2.3
Da die HD01 dann plötzlich nicht mehr hell wurde, bin ich jetzt auf Oscm umgestiegen.
HD01 und V13 sind hell, allerdings habe ich bei der V13 Status OFF und no entitlements

Spoiler: oscam.server

[reader]
label = V13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 14
detect = cd
autospeed = 1
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

Ist das alles so korrekt ?
Was ist als nächstes zu tun ?

 

[Gatzi]

das sieht nicht schlecht aus. poste mal den Rest der Configs.

oscam.conf oscam.user

 

[Skydiver]

Hi ,
Was sagt denn das Log ?

Gesendet von meinem SM-N9005 mit Tapatalk

 

[rantzel]

Spoiler: oscam.conf

[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/

[cache]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = dvbapi_local
boxtype = dreambox

[webif]
httpport = 83
httposcamlabel = Oscam WebInterface
httphelplang = de
httpallowed = 0.0.0.0-255.255.255.254
hideclient_to = 15

Spoiler: oscam.user

[account]
user = dvbapi_local
au = 1
group = 1,2

Im Log steht nicht viel....

Spoiler: oscam.log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Apr 10 13:49:08 2018
-------------------------------------------------------------------------------
2018/04/10 13:49:08 11E1DC30 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11377 (mipsel-oe-linux)
2018/04/10 13:49:17 111D3F05 c (ecm) dvbapi_local (1830@000000/0000/EF75/92:A05BB02266FF123DCE54EE3833141967): found (403 ms) by hdplus
2018/04/10 13:49:19 11E1DC30 h Stopping log...

Was muss ich einstellen, damit da mehr drin steht ?

 

[Skydiver]

Hi ,
Ein Log vom Einlesen der Karte bzw oscamstart


Gesendet von meinem SM-N9005 mit Tapatalk

 

[bubbl]

Zeig mal die config der V13 und log ab start der oscam

 

[rantzel]

Spoiler: LiveLog

• 2018/04/10 22:26:28 00000000 s (main) Host name = vuduo2
• 2018/04/10 22:26:28 00000000 s (main) Release = 3.13.5
• 2018/04/10 22:26:28 00000000 s (main) Version = #2 SMP Sat Feb 10 17:23:31 CET 2018
• 2018/04/10 22:26:28 00000000 s (main) Machine = mips
• 2018/04/10 22:26:28 00000000 s (main) Stb model = dm8000
• 2018/04/10 22:26:28 00000000 s (main) Stb vumodel = vuduo2
• 2018/04/10 22:26:28 00000000 s (main) Stb boxtype = vuduo2
• 2018/04/10 22:26:28 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 9171
• 2018/04/10 22:26:28 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2018/04/10 22:26:28 00000000 s (main) signal handling initialized
• 2018/04/10 22:26:28 00000000 s (config) 2 provid's loaded
• 2018/04/10 22:26:28 00000000 s (reader) V13 [internal] creating thread for device /dev/sci0
• 2018/04/10 22:26:28 00000000 s (reader) hdplus [internal] creating thread for device /dev/sci1
• 2018/04/10 22:26:28 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/04/10 22:26:28 00000000 s (emmcache) loaded 44 emmcache records from /etc/tuxbox/config/oscam.emmcache in 2 ms
• 2018/04/10 22:26:28 0B39FEA9 r (reader) V13 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2018/04/10 22:26:28 0B39FEA9 r (reader) V13 [internal] Reader sci internal, detected box type: vuduo2
• 2018/04/10 22:26:28 4C42B3C1 r (reader) hdplus [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2018/04/10 22:26:28 4C42B3C1 r (reader) hdplus [internal] Reader sci internal, detected box type: vuduo2
• 2018/04/10 22:26:28 00000000 s (emmcache) loaded 43 emmstat records from /etc/tuxbox/config/oscam.emmstat in 2 ms
• 2018/04/10 22:26:28 00000000 s (anticasc) anti cascading disabled
• 2018/04/10 22:26:28 420DA159 c (client) plain dvbapi-client granted (dvbapi_local, au=auto (2 reader))
• 2018/04/10 22:26:28 420DA159 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2018/04/10 22:26:28 420DA159 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2018/04/10 22:26:28 111D3F05 h (webif) webif: decompressed 177547 bytes back into 437176 bytes
• 2018/04/10 22:26:28 111D3F05 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2018/04/10 22:26:29 4C42B3C1 r (reader) hdplus [internal] card detected
• 2018/04/10 22:26:30 4C42B3C1 r (reader) hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
• 2018/04/10 22:26:30 4C42B3C1 r (reader) hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/04/10 22:26:30 4C42B3C1 r (reader) hdplus [internal] Calculated work ETU is 7.11 us reader mhz = 450
• 2018/04/10 22:26:33 4C42B3C1 r (reader) hdplus [internal] Buffers readed 0 bytes total time_us 3099309
• 2018/04/10 22:26:34 4C42B3C1 r (reader) hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
• 2018/04/10 22:26:34 4C42B3C1 r (reader) hdplus [internal] Card responded ok for ifsd request of 251
• 2018/04/10 22:26:35 4C42B3C1 r (reader) hdplus [internal] detect native nagra card
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [internal] ready for requests
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [internal] found card system nagra
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] ROM: D N A S P 1 4 2
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] REV: R e v G C 6
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] SER: ############
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] CAID: 1830
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] Prv.ID: 00 00 00 00
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] IRD ID: ############
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] active to: 2018/06/01 12:59
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] -----------------------------------------
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] |id |tier |valid from |valid to |
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] +----+--------+------------+------------+
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] |8011|0064 |2010/10/25 |2011/10/26 |
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] |8011|0BEA |2016/12/26 |2018/12/12 |
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] |8011|0BB8 |2017/12/26 |2018/05/30 |
• 2018/04/10 22:26:36 4C42B3C1 r (reader) hdplus [nagra] -----------------------------------------
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CAA PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19AA PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1EAA PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AAA PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BAA PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 0609 PROVID: 051900
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 06CB ECM_PID: 026C PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186A ECM_PID: 1FAA PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 8 CAID: 186D ECM_PID: 1FAB PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 ecmpid 9 CAID: 098D ECM_PID: 0608 PROVID: 000000
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 found 10 ECMpids and 5 STREAMpids in caPMT
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1830 PROVID 000000 ECMPID 1CAA ANY CHID PMTPID 0065 VPID 05FF
• 2018/04/10 22:27:05 420DA159 c (dvbapi) Demuxer 0 found 10 ECMpids and 5 STREAMpids in PMT
• 2018/04/10 22:27:05 420DA159 c (ecm) dvbapi_local (1830@000000/0000/EF15/92:84EDBEC6B85025CDF203E681270DF1E6): found (404 ms) by hdplus
• 2018/04/10 22:27:06 420DA159 c (ecm) dvbapi_local (1830@000000/0000/EF15/92:4167C03E30953A04F15114E685761B4D): found (604 ms) by hdplus
• 2018/04/10 22:27:09 420DA159 c (dvbapi) Demuxer 0 stop descrambling program number EF15 (1830@000000:EF15 unknown)

Config der V13 steht doch im ersten Beitrag oder was meinst du ?

 

[Skydiver]

Die Karte wird ja gar nicht gelesen

Gesendet von meinem SM-N9005 mit Tapatalk

 

[rantzel]

Aber alle Programme sind hell ....Verstehe jetzt nur Bahnhof

 

[bubbl]

Sorry übersehen und deine V13 fehlt im log

 

[rantzel]

Wie kriege ich die in den Log ? Wie gesagt die Programme sind hell

 

[Gatzi]

mal einen kompletten Neustart machen!

 

[Smiley007]

maxlogsize = 100

ändere die 100 auf 1024 und starte die Oscam neu

 

[rantzel]

Oh mein Gott... Ich war jetzt so lange aus dem Thema raus...
Ich hatte irgendwann als alles zusammenbrach mit dem Himmel mir ein ci Modul besorgt, damit hatte sich das dann ja auch erledigt...
Tut mir leid das ich Eure Zeit in Anspruch genommen habe
Vielen Dank trotzdem...

 

[Gatzi]

:astonished::astonished::astonished: