Diskussione Thread di diskussione su How-To Udev

[elcoro]

AW: Thread di diskussione su How-To Udev

Beh allora? ho fatto bene rigaurdo il file rules? cosa posso fare adesso?

scusami ma non avevi risolto sull´altro 3ad?

Beh a questo punto direi che il thread è risolto perchè funziona tramite smartreader updater 1.7 e inserendo il nome del device per poi creare il cosiddetto Rules

 

[terminal]

AW: Thread di diskussione su How-To Udev

scusami ma non avevi risolto sull´altro 3ad?

Beh a questo punto direi che il thread è risolto perchè funziona tramite smartreader updater 1.7 e inserendo il nome del device per poi creare il cosiddetto Rules

Si ma se hai letto bene uno solo mi funziona se metto due insieme uno va e l'altro no

Inviato dal mio GT-I9300 con Tapatalk 2

 

[elcoro]

AW: Thread di diskussione su How-To Udev

ok perfetto allora vediamo il tuo

Ora posta la tua 10-usbadapter.rules

Usi debian oppure Ubuntu? come ta postato meister85

il tuo primo serial : 87654321 ( dovrebbe essere /dev/sky

il secondo serial : abcd1234 ( dovrebbe essere /dev/redlight

il terzo serial : 12345678 ( dovrebbe essere /dev/tivusat

facci sapere

devo anche dire che il terzo come serial mi sembra un po strano

 

[terminal]

AW: Thread di diskussione su How-To Udev

ok perfetto allora vediamo il tuo

Ora posta la tua 10-usbadapter.rules

Usi debian oppure Ubuntu? come ta postato meister85

il tuo primo serial : 87654321 ( dovrebbe essere /dev/sky

il secondo serial : abcd1234 ( dovrebbe essere /dev/redlight

il terzo serial : 12345678 ( dovrebbe essere /dev/tivusat

facci sapere

devo anche dire che il terzo come serial mi sembra un po strano

Non sono al PC però posterò il tutto. Voglio dire che gli attrs li ho messi io con smargo updater 1.7 e ti da la possibilità di poter cambiare il parametro perché se leggi il mio post riguardo dmesg, tra le virgolette attrs non mi usciva niente mettendo il nome del dispositivo adesso va ma non due insieme.
Inviato dal mio GT-I9300 con Tapatalk 2

 

[elcoro]

AW: Thread di diskussione su How-To Udev

e nn potrebbe essere che il tuo smargo sia rotto, non funziona a dovere per questo nn ti da il serial
ho avuto anche io diversi problemi con smargo fin quando lo cambiati e ho preso easymouse2 funzionano che e na meraviglia

 

[terminal]

AW: Thread di diskussione su How-To Udev

e nn potrebbe essere che il tuo smargo sia rotto, non funziona a dovere per questo nn ti da il serial
ho avuto anche io diversi problemi con smargo fin quando lo cambiati e ho preso easymouse2 funzionano che e na meraviglia

Capisco ma con device ttyUSB0 Va bene quindi credo che lo smargo vada bene

Inviato dal mio GT-I9300 con Tapatalk 2

 

[terminal]

AW: Thread di diskussione su How-To Udev

Allora uso Debian con IPC 11.5

ecco qui il RULES

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="12345678", SYMLINK+="SkyItalia"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="87654321", SYMLINK+="Tivusat"

Per adesso ho lasciato fuori la Redlight

Per ogni seriale di uno smargo va messo sempre nello stesso file?

 

[elcoro]

AW: Thread di diskussione su How-To Udev

ok perfetto ma adesso skyitalia ti funziona ? se la iinserita sul smargo con serial : 12345678?

per le config che cambi li fai tramite il Webif ho li trasferisci tramite putty.

 

[terminal]

AW: Thread di diskussione su How-To Udev

Si funziona

 

[elcoro]

AW: Thread di diskussione su How-To Udev

lo sai che stai postando la stessa cosa in due post differenti.

quindi se ti funziona la sky adesso dovresti configurare per la tivusat e se mettti tutto a posto funziona anche tivusat,
vedi diversi post fatti da altri user tutti vanno a buon fine.

 

[terminal]

AW: Thread di diskussione su How-To Udev

Beh allora potete anche chiudere questo perchè vorrei risolvere la tivusat poi vediamo il fatto UDEV grazie ancora e chiedo scusa al forum se sto creando confusione

 

[meister85]

AW: Thread di diskussione su How-To Udev

Metti perfavore solo due reader (quello per sky e quello per tivusat) attachati e vedi se hai preso i seriali corretti!

Anzi meglio se li posti qui!

Moi prova magari a rinominare la rules da 10 a 40 e fai un restart del server.

 

[terminal]

Allora lasciamo perdere gli smargo e prendiamo in considerazione solo easymouse.

ecco i comandi udev

Spoiler

root@debian / > udevadm info -n /dev/ttyUSB1 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.5/1-2.5:1.0/ttyUSB1/tty/ttyUSB1':
KERNEL=="ttyUSB1"
SUBSYSTEM=="tty"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.5/1-2.5:1.0/ttyUSB1':
KERNELS=="ttyUSB1"
SUBSYSTEMS=="usb-serial"
DRIVERS=="ftdi_sio"
ATTRS{latency_timer}=="1"
ATTRS{port_number}=="0"

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.5/1-2.5:1.0':
KERNELS=="1-2.5:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="ftdi_sio"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="ff"
ATTRS{bInterfaceProtocol}=="ff"
ATTRS{modalias}=="usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF"
ATTRS{supports_autosuspend}=="0"
ATTRS{interface}=="FT232R USB UART"

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.5':
KERNELS=="1-2.5"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}==" 90mA"
ATTRS{urbnum}=="76261977"
ATTRS{idVendor}=="0403"
ATTRS{idProduct}=="6001"
ATTRS{bcdDevice}=="0600"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{speed}=="12"
ATTRS{busnum}=="1"
ATTRS{devnum}=="13"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="FTDI"
ATTRS{product}=="FT232R USB UART"
ATTRS{serial}=="A901LNHI"

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2':
KERNELS=="1-2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}=="100mA"
ATTRS{urbnum}=="241"
ATTRS{idVendor}=="1a40"
ATTRS{idProduct}=="0201"
ATTRS{bcdDevice}=="0100"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="02"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="1"
ATTRS{devnum}=="2"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="7"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{product}=="USB 2.0 Hub [MTT]"

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
KERNELS=="usb1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="65"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0002"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="1"
ATTRS{devnum}=="1"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="10"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
ATTRS{product}=="EHCI Host Controller"
ATTRS{serial}=="0000:00:02.1"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:02.1':
KERNELS=="0000:00:02.1"
SUBSYSTEMS=="pci"
DRIVERS=="ehci_hcd"
ATTRS{vendor}=="0x10de"
ATTRS{device}=="0x03f2"
ATTRS{subsystem_vendor}=="0x1849"
ATTRS{subsystem_device}=="0x03f2"
ATTRS{class}=="0x0c0320"
ATTRS{irq}=="22"
ATTRS{local_cpus}=="ffffffff"
ATTRS{local_cpulist}=="0-31"
ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
ATTRS{companion}==""

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

Poi ho dato questi comandi

cd /etc/udev/rules.d

touch 10-usbadapter.rules

nano 10-usbadapter.rules

e poi questo

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A901LNHI", SYMLINK+="scheda1"

ragazzi controllate bene quello che ho scritto perchè ho fatto un copia e incolla magari ho sbagliato qualche lettera o simbolo

adesso se ho caipo bene in oscam.server devo usare questo:

Spoiler

device = /dev/scheda1

giusto? posso provare a far partire oscam con questa configurazione?

Ragazzi confermo va bene posto il log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Feb 25 21:42:50 2013
-------------------------------------------------------------------------------
2013/02/25 21:42:50 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8358 (i486-linux-gnu)
2013/02/25 21:42:50 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8953
2013/02/25 21:42:50 0 s ERROR: Cannot open file "/var/etc/oscam.services" (errno=2 No such file or directory)
2013/02/25 21:42:50 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/02/25 21:42:50 0 s signal handling initialized
2013/02/25 21:42:50 0 s ERROR: Cannot open file "/var/etc/oscam.srvid" (errno=2 No such file or directory)
2013/02/25 21:42:50 0 s ERROR: Cannot open file "/var/etc/oscam.tiers" (errno=2 No such file or directory)
2013/02/25 21:42:50 0 s ERROR: Cannot open file "/var/etc/oscam.provid" (errno=2 No such file or directory)
2013/02/25 21:42:50 0 s ERROR: Cannot open file "/var/etc/oscam.guess" (errno=2 No such file or directory)
2013/02/25 21:42:50 0 s ERROR: Cannot open file "/var/etc/oscam.ird" (errno=2 No such file or directory)
2013/02/25 21:42:50 0 s ERROR: Cannot open file "/var/etc/oscam.whitelist" (errno=2 No such file or directory)
2013/02/25 21:42:50 0 s ERROR: Cannot open file "/var/etc/oscam.cacheex" (errno=2 No such file or directory)
2013/02/25 21:42:50 0 s monitor: disabled
2013/02/25 21:42:50 0 s camd35: disabled
2013/02/25 21:42:50 0 s cs378x: disabled
2013/02/25 21:42:50 0 s newcamd: disabled
2013/02/25 21:42:50 0 s cccam: initialized (fd=5, port=12000)
2013/02/25 21:42:50 0 s pandora: disabled
2013/02/25 21:42:50 0 s csp: disabled
2013/02/25 21:42:50 0 s radegast: disabled
2013/02/25 21:42:50 0 s tivusat [mouse] creating thread for device /dev/scheda1
2013/02/25 21:42:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/02/25 21:42:50 0 s waiting for local card init
2013/02/25 21:42:50 B7200468 h dvbapi: HTTP Server listening on port 18641
2013/02/25 21:42:50 9B7E418 r tivusat [mouse] Reader initialized (device=/dev/scheda1, detect=cd, mhz=357, cardmhz=357)
2013/02/25 21:42:51 9B7E418 r tivusat [mouse] card detected
2013/02/25 21:42:53 9B7E418 r tivusat [mouse] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2013/02/25 21:42:53 9B7E418 r tivusat [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/02/25 21:42:53 9B7E418 r tivusat [mouse] Setting baudrate to 111600 bps
2013/02/25 21:42:53 9B7E418 r tivusat [mouse] Calculated work ETU is 8.96 us
2013/02/25 21:42:53 9B7E418 r tivusat [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/02/25 21:42:54 9B7E418 r tivusat [mouse] detect nagra tiger card
2013/02/25 21:42:54 9B7E418 r tivusat [mouse] type: NAGRA, caid: 183D, IRD ID: ############
2013/02/25 21:42:54 9B7E418 r tivusat [mouse] ProviderID: 00 00 54 11
2013/02/25 21:42:54 9B7E418 r tivusat [mouse] found card system nagra
2013/02/25 21:42:54 9B7E418 r tivusat [nagra] ROM: T I G E R 0 0 3
2013/02/25 21:42:54 9B7E418 r tivusat [nagra] REV: R e v 2 5 0
2013/02/25 21:42:54 9B7E418 r tivusat [nagra] SER: ############
2013/02/25 21:42:54 9B7E418 r tivusat [nagra] CAID: 183D
2013/02/25 21:42:54 9B7E418 r tivusat [nagra] Prv.ID: 00 00 54 11 (sysid)
2013/02/25 21:42:54 9B7E418 r tivusat [nagra] Activation Date : 01/01/2009
2013/02/25 21:42:54 9B7E418 r tivusat [nagra] Expiry Date : 01/01/2038
2013/02/25 21:42:55 0 s init for all local cards done
2013/02/25 21:42:55 0 s anti cascading disabled
2013/02/25 21:42:55 9B85460 c encrypted cccam-client 192.168.178.10 granted (user1, au=on (1 reader))

EDIT:

Credo che questo thread termina qui. Per gli smargo e le altre schede da far partire aprirò altri post giusto? Datemi conferma che farò in questo modo

 

[meister85]

AW: Thread di diskussione su How-To Udev

Sei voui usare udev per le tue scede puoi anche continuare qui

 

[Zasso]

AW: Thread di diskussione su How-To Udev

Ciao a tutti,

mi collego a questo thread anche se non alimentato da un po' di tempo.
Spero che non vada contro le regole.

Ho anche io un easymouse2 usb premium (questo

Sie müssen registriert sein, um Links zu sehen.

) a non riesco a farlo funzionare su Debian 6.0.8.

Posto di seguito i vari output

lsusb

Spoiler

root@debian:~# lsusbBus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ls -l /dev/ttyUSB*

Spoiler

root@debian:~# ls -l /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 0 Jan 18 13:01 /dev/ttyUSB0

[COLOR=#333333]udevadm info -n [/COLOR]/dev/ttyUSB0[COLOR=#333333] -a[/COLOR]

Spoiler

root@debian:~# udevadm info -n /dev/ttyUSB0 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.


looking at device '/devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/ttyUSB0/tty/ttyUSB0':
KERNEL=="ttyUSB0"
SUBSYSTEM=="tty"
DRIVER==""


looking at parent device '/devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/ttyUSB0':
KERNELS=="ttyUSB0"
SUBSYSTEMS=="usb-serial"
DRIVERS=="ftdi_sio"
ATTRS{latency_timer}=="1"
ATTRS{port_number}=="0"


looking at parent device '/devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0':
KERNELS=="3-1:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="ftdi_sio"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="ff"
ATTRS{bInterfaceProtocol}=="ff"
ATTRS{modalias}=="usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF"
ATTRS{supports_autosuspend}=="0"
ATTRS{interface}=="FT232R USB UART"


looking at parent device '/devices/pci0000:00/0000:00:10.1/usb3/3-1':
KERNELS=="3-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}==" 90mA"
ATTRS{urbnum}=="431786"
ATTRS{idVendor}=="0403"
ATTRS{idProduct}=="6001"
ATTRS{bcdDevice}=="0600"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{speed}=="12"
ATTRS{busnum}=="3"
ATTRS{devnum}=="2"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="FTDI"
ATTRS{product}=="FT232R USB UART"
ATTRS{serial}=="A7031GOU"


looking at parent device '/devices/pci0000:00/0000:00:10.1/usb3':
KERNELS=="usb3"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="36"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="3"
ATTRS{devnum}=="1"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="2"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.32-5-686 uhci_hcd"
ATTRS{product}=="UHCI Host Controller"
ATTRS{serial}=="0000:00:10.1"
ATTRS{authorized_default}=="1"


looking at parent device '/devices/pci0000:00/0000:00:10.1':
KERNELS=="0000:00:10.1"
SUBSYSTEMS=="pci"
DRIVERS=="uhci_hcd"
ATTRS{vendor}=="0x1106"
ATTRS{device}=="0x3038"
ATTRS{subsystem_vendor}=="0x1043"
ATTRS{subsystem_device}=="0x81cf"
ATTRS{class}=="0x0c0300"
ATTRS{irq}=="22"
ATTRS{local_cpus}=="ffffffff"
ATTRS{local_cpulist}=="0-31"
ATTRS{modalias}=="pci:v00001106d00003038sv00001043sd000081CFbc0Csc03i00"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""


looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

nano 10-usbadapter.rules

Spoiler

root@debian:/etc/udev/rules.d# nano 10-usbadapter.rules

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A7031GOU", SYMLINK+="skyit"

A questo punto ho riavviato il sistema e ho provato ad avviare la oscam con 2 differenti configurazioni (modificando mouse o smargo in protocol)

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r582# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = Tivusat
description =
enable = 1
protocol = smargo
device = /dev/skyit
reconnectdelay = 60000
smargopatch = 1
autospeed = 1
caid = 183D
rsakey = A92DA72F.........
ecmwhitelist = 183D@1F1F1F:8C,B7
detect = cd
nagra_read = 0
mhz = 368
cardmhz = 368
ident = 183D:005411,000000
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 1
blockemm-g = 1
lb_weight = 100
cccreshare = -1

Ma ricevo sempre questo tipo di errore

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver log switched at Sat Jan 18 13:39:28 2014
-------------------------------------------------------------------------------
2014/01/18 13:39:28 976D6A8 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9385 (i486-linux-gnu)
2014/01/18 13:39:28 976D6A8 h WebIf: Origin checked. Result: access from 192.168.178.24 => allowed
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Receiving:
2014/01/18 13:39:29 B7400588 F1 F0 FD FF F0 ED FF FC F0 F6 FF EC EA F6 EE E4
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Timeout in IO_Serial_Read
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IFD: Smargo ATR: 16 bytes
2014/01/18 13:39:29 B7400588 F1 F0 FD FF F0 ED FF FC F0 F6 FF EC EA F6 EE E4
2014/01/18 13:39:29 0 share-updater mode=initfast t=1s i=27
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Smargo: sending F=0174 (372), D=01 (1), Freq=0E6A (3690), N=00 (0), T=00 (0), inv=00 (0)
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 4 char(s), chunksize 4 char(s)
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:29 B7400588 01 01 74 01
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 3 char(s), chunksize 3 char(s)
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:29 B7400588 02 0E 6A
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 2 char(s), chunksize 2 char(s)
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:29 B7400588 03 00
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 2 char(s), chunksize 2 char(s)
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:29 B7400588 04 00
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 2 char(s), chunksize 2 char(s)
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:29 B7400588 05 00
2014/01/18 13:39:29 976D6A8 h WebIf: Origin checked. Result: access from 192.168.178.24 => allowed
2014/01/18 13:39:29 0 --- Skipped 2 duplicated log lines ---
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IFD: Setting parity from Odd to None
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Getting readerstatus...
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Set reader ready to Send
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Read timeout 500000 us, read delay 0 us, to read 33 char(s), chunksize 33 char(s)
2014/01/18 13:39:29 976D6A8 h WebIf: Origin checked. Result: access from 192.168.178.24 => allowed
2014/01/18 13:39:29 0 --- Skipped 1 duplicated log lines ---
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Timeout in IO_Serial_WaitToRead, timeout=500000 us
2014/01/18 13:39:29 B7400588 r Tivusat [smargo] IO: Setting RTS=1
2014/01/18 13:39:30 B7400588 r Tivusat [smargo] IO: Setting RTS=0
2014/01/18 13:39:30 0 share-updater mode=initfast t=1s i=26
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Receiving:
2014/01/18 13:39:31 B7400588 F1 F0 FD FF F0 ED FF FC F0 F6 FF EC EA F6 EE E4
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Timeout in IO_Serial_Read
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IFD: Smargo ATR: 16 bytes
2014/01/18 13:39:31 B7400588 F1 F0 FD FF F0 ED FF FC F0 F6 FF EC EA F6 EE E4
2014/01/18 13:39:31 0 share-updater mode=initfast t=1s i=25
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Smargo: sending F=026A (618), D=01 (1), Freq=1770 (6000), N=00 (0), T=01 (1), inv=00 (0)
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 4 char(s), chunksize 4 char(s)
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:31 B7400588 01 02 6A 01
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 3 char(s), chunksize 3 char(s)
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:31 B7400588 02 17 70
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 2 char(s), chunksize 2 char(s)
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:31 B7400588 03 00
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 2 char(s), chunksize 2 char(s)
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:31 B7400588 04 01
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Write timeout 1000 us, write delay 0 us, to send 2 char(s), chunksize 2 char(s)
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Sending:
2014/01/18 13:39:31 B7400588 05 00
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IFD: Setting parity from None to Even
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Getting readerstatus...
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Set reader ready to Send
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Read timeout 500000 us, read delay 0 us, to read 33 char(s), chunksize 33 char(s)
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Timeout in IO_Serial_WaitToRead, timeout=500000 us
2014/01/18 13:39:31 B7400588 r Tivusat [smargo] IO: Setting RTS=1
2014/01/18 13:39:32 B7400588 r Tivusat [smargo] IO: Setting RTS=0
2014/01/18 13:39:32 0 share-updater mode=initfast t=1s i=24
2014/01/18 13:39:33 B7400588 r Tivusat [smargo] IO: Receiving:
2014/01/18 13:39:33 B7400588 F1 F0 FD FF F0 ED FF FC F0 F6 FF EC EA F6 EE E4
2014/01/18 13:39:33 B7400588 r Tivusat [smargo] IO: Timeout in IO_Serial_Read
2014/01/18 13:39:33 B7400588 r Tivusat [smargo] IFD: Smargo ATR: 16 bytes
2014/01/18 13:39:33 B7400588 F1 F0 FD FF F0 ED FF FC F0 F6 FF EC EA F6 EE E4
2014/01/18 13:39:33 B7400588 r ERROR: this ATR TS byte is 00 and that should be 3B for direct or 3F for inverse convention!
2014/01/18 13:39:33 B7400588 r ERROR, function call reader->crdr.activate(reader, atr) returns error.
2014/01/18 13:39:33 B7400588 r Tivusat [smargo] Error activating card.

Spero mi possiate aiutare a sistemare.
Potreste dirmi anche come settare l'easymouse2?

- Smartmouse o Phoenix?
- 3,5V o 5V
- 3,57 MHz?

Grazie