Diskussione Thread di diskussione su How-To Udev

meister85 · 4. Februar 2013

Thread di diskussione su How-To Udev

fedro65 · 6. Februar 2013

AW: Thread di diskussione su How-To Udev

ciao meister85 e per la configurazione cccam
il device come viene impostato

elcoro · 6. Februar 2013

AW: Thread di diskussione su How-To Udev

stessa procedura di sopra How-to

fedro65 · 6. Februar 2013

AW: Thread di diskussione su How-To Udev

grz da quanto ho capito io questa conf

SERIAL READER : /dev/ttyUSB0 phoenix
SMARTCARD CLOCK FREQUENCY : /dev/ttyUSB0 3570000
TRY ALL CHIDS : /dev/ttyUSB0

e la devo modificare cosi giusto ho sbaglio

SERIAL READER : /dev/sceda1 phoenix
SMARTCARD CLOCK FREQUENCY : /dev/sceda1 3570000
TRY ALL CHIDS : /dev/sceda1
uso easymouse2

meister85 · 6. Februar 2013

AW: Thread di diskussione su How-To Udev

Si giusto!

Gesendet von meinem iPad mit Tapatalk HD

fedro65 · 6. Februar 2013

AW: Thread di diskussione su How-To Udev

grazie per la risposta

terminal · 20. Februar 2013

AW: Thread di diskussione su How-To Udev

Ragazzi ma se ho due smargo devo modificare sempre lo stesso file? Io ho fatto in questo modo non va

Code:

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="12345678", SYMLINK+="SkyItalia"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="87654321", SYMLINK+="Redlighter"

Ho fatto così e non si avvia niente ne l'uno ne l'altro ma se metto al secondo in oscam reader

device = /dev/ttyUSB1

il tutto funziona

Come mai non ne vuole sapere?

meister85 · 20. Februar 2013

AW: Thread di diskussione su How-To Udev

Mi servono il seriale del reader per vedere se hai fatto tutto come spiegato nel how-to!

terminal · 21. Februar 2013

AW: Thread di diskussione su How-To Udev

Ecco

Code:

root@debian / > udevadm info -n /dev/ttyUSB1 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.6/1-2.6:1.0/ttyUSB1/tty/ttyUSB1':
    KERNEL=="ttyUSB1"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.6/1-2.6:1.0/ttyUSB1':
    KERNELS=="ttyUSB1"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.6/1-2.6:1.0':
    KERNELS=="1-2.6:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0400dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="Smartreader plus"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.6':
    KERNELS=="1-2.6"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="938811"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0400"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="21"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Argolis BV"
    ATTRS{product}=="Smartreader plus"
    ATTRS{serial}=="87654321"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2':
    KERNELS=="1-2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="127"
    ATTRS{idVendor}=="1a40"
    ATTRS{idProduct}=="0201"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="7"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{product}=="USB 2.0 Hub [MTT]"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="36627"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="10"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:02.1"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:02.1':
    KERNELS=="0000:00:02.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x10de"
    ATTRS{device}=="0x03f2"
    ATTRS{subsystem_vendor}=="0x1849"
    ATTRS{subsystem_device}=="0x03f2"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="22"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

meister85 · 21. Februar 2013

AW: Thread di diskussione su How-To Udev

Credevo che hai risolto???

https://www.digital-eliteboard.com/...levato-dmesg&p=1752242&viewfull=1#post1752242

terminal · 21. Februar 2013

AW: Thread di diskussione su How-To Udev

No lì ho risolto ma se metto 2 reader non va. Uno alla vota si però, ecco perchè chiedevo se si doveva creare un altro file oppure no. Quindi credo che la funzione UDEV va benissimo per questo ho detto che era risolto, ma ciò non toglie che oscam non me lo apre insieme agli altri reader va in blocco ma uno alla volta si, non so se mi sono spiegato bene, infatti nell'altro thread che ho aperto riguardo configurazione 3 smargo, SKYItalia, Redlight e tivusat li sto facendo partire nel modo seguente:

Skyitalia = device UDEV
Redlight = device ttyUSB1
Tivusat = device ttyUSB2

Spero di essere stato chiaro, in pratica vorrei far partire tutti con i comandi UDEV tutto qua, allora per non fermarmi su punti fissi, per 3 problematiche ho aperto altrettanti thread, e spero di aver fatto cosa gradita

meister85 · 21. Februar 2013

AW: Thread di diskussione su How-To Udev

Postami tutt e tre seriali.

terminal · 22. Februar 2013

meister85 schrieb:
Postami tutt e tre seriali.

Ok però mi interesserebbe anche far partire tivusat

Inviato dal mio GT-I9300 con Tapatalk 2

Code:

root@debian / > ls -l /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 1 21 feb 23.34 /dev/ttyUSB1
crw-rw---- 1 root dialout 188, 2 21 feb 23.34 /dev/ttyUSB2
crw-rw---- 1 root dialout 188, 3 21 feb 23.34 /dev/ttyUSB3

Primo seriale

Code:

root@debian / > udevadm info -n /dev/ttyUSB1 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.5/1-4.5:1.0/ttyUSB1/tty/ttyUSB1':
    KERNEL=="ttyUSB1"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.5/1-4.5:1.0/ttyUSB1':
    KERNELS=="ttyUSB1"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.5/1-4.5:1.0':
    KERNELS=="1-4.5:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0400dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="Smartreader plus"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.5':
    KERNELS=="1-4.5"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="15"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0400"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="6"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Argolis BV"
    ATTRS{product}=="Smartreader plus"
    ATTRS{serial}=="87654321"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4':
    KERNELS=="1-4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="117"
    ATTRS{idVendor}=="1a40"
    ATTRS{idProduct}=="0201"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="7"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{product}=="USB 2.0 Hub [MTT]"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="49"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="10"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:02.1"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:02.1':
    KERNELS=="0000:00:02.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x10de"
    ATTRS{device}=="0x03f2"
    ATTRS{subsystem_vendor}=="0x1849"
    ATTRS{subsystem_device}=="0x03f2"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="22"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

Secondo seriale

Code:

root@debian / > udevadm info -n /dev/ttyUSB2 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.6/1-4.6:1.0/ttyUSB2/tty/ttyUSB2':
    KERNEL=="ttyUSB2"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.6/1-4.6:1.0/ttyUSB2':
    KERNELS=="ttyUSB2"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.6/1-4.6:1.0':
    KERNELS=="1-4.6:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0400dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="Smartreader plus"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.6':
    KERNELS=="1-4.6"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="15"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0400"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="7"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Argolis BV"
    ATTRS{product}=="Smartreader plus"
    ATTRS{serial}=="abcd1234"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4':
    KERNELS=="1-4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="117"
    ATTRS{idVendor}=="1a40"
    ATTRS{idProduct}=="0201"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="7"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{product}=="USB 2.0 Hub [MTT]"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="49"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="10"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:02.1"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:02.1':
    KERNELS=="0000:00:02.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x10de"
    ATTRS{device}=="0x03f2"
    ATTRS{subsystem_vendor}=="0x1849"
    ATTRS{subsystem_device}=="0x03f2"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="22"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

Terzo seriale

Code:

root@debian / > udevadm info -n /dev/ttyUSB3 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.7/1-4.7:1.0/ttyUSB3/tty/ttyUSB3':
    KERNEL=="ttyUSB3"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.7/1-4.7:1.0/ttyUSB3':
    KERNELS=="ttyUSB3"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.7/1-4.7:1.0':
    KERNELS=="1-4.7:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0400dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="Smartreader plus"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.7':
    KERNELS=="1-4.7"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="15"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0400"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="8"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Argolis BV"
    ATTRS{product}=="Smartreader plus"
    ATTRS{serial}=="12345678"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4':
    KERNELS=="1-4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="117"
    ATTRS{idVendor}=="1a40"
    ATTRS{idProduct}=="0201"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="7"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{product}=="USB 2.0 Hub [MTT]"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="49"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="10"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:02.1"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:02.1':
    KERNELS=="0000:00:02.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x10de"
    ATTRS{device}=="0x03f2"
    ATTRS{subsystem_vendor}=="0x1849"
    ATTRS{subsystem_device}=="0x03f2"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="22"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

meister85 · 22. Februar 2013

AW: Thread di diskussione su How-To Udev

Ok, fin qui tutto ok.

Ora posta la tua 10-usbadapter.rules

Usi debian oppure Ubuntu?

terminal · 22. Februar 2013

AW: Thread di diskussione su How-To Udev

Beh allora? ho fatto bene rigaurdo il file rules? cosa posso fare adesso?

Suche

Suche

Diskussione Thread di diskussione su How-To Udev

meister85

fedro65

Ist gelegentlich hier

elcoro

fedro65

Ist gelegentlich hier

meister85

fedro65

Ist gelegentlich hier

terminal

Freak

meister85

terminal

Freak

meister85

terminal

Freak

meister85

terminal

Freak

meister85

terminal

Freak

Ähnliche Themen

Spenden Unterstützung