Telecolumbus mit oscam

[dersimlicemo]

hi Leute

ich komme nicht weiter... vielleicht köönt ihr mir ja mal wieder weiter helfen.
Ich versuche die Telecolumbus mit einem Debian zu sharen aber nicht alle funzt wie es sollte. Die RTL etc. laufen alles ok.
Ich möchte aber gerne die Türkischen sender sharen was leider nicht geht. in der oscam webif sehe ich CARDOK.

hier mal meine config

Spoiler

# OSCam Konfiguration IPC - oscam.conf

[global]
logfile= /var/log/ipc/OScam.log
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
Saveinithistory = 1


[webif]
httpport = xxxx
httpuser = user
httppwd = pass
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xxxxxx.dyndns.org

[reader]
label = telecolumbus
protocol = smartreader
device = Serial:Reader B5DCCEB
caid = 09AF
boxid = 12345678
detect = cd
mhz = 480
cardmhz = 357
group = 1
emmcache = 1,3,2



oscam.log

2013/02/18 21:11:56 B73FAB70 r Found reader with serial Reader B5CCEB at 005:002
2013/02/18 21:11:56 B73FAB70 r Found smartreader device Serial:Reader B5DCCEB
2013/02/18 21:11:57 B73FAB70 r telecolumbus card detected
2013/02/18 21:12:00 B73FAB70 r ATR: 3F 7D 13 25 02 41 B0 03 69 FF 4A 50 F0 80 00 54 37 03
2013/02/18 21:12:02 B73FAB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2013/02/18 21:12:04 B73FAB70 r [videoguard2-reader] parental lock setting: FF FF FF FF
2013/02/18 21:12:04 B73FAB70 r [videoguard2-reader] type: VideoGuard Unknown Card, caid: 09AF
2013/02/18 21:12:04 B73FAB70 r [videoguard2-reader] serial: xxxxxx, BoxID: 12345678, baseyear: 1997
2013/02/18 21:12:04 B73FAB70 r [videoguard2-reader] ready for requests
2013/02/18 21:12:04 B73FAB70 r found cardsystem videoguard2
2013/02/18 21:12:04 B73FAB70 r [videoguard2-reader] telecolumbus card detected
2013/02/18 21:12:04 B73FAB70 r [videoguard2-reader] type: VideoGuard Unknown Card
2013/02/18 21:12:11 B74546C0 s init for all local cards done
2013/02/18 21:12:11 B74546C0 s anti cascading disabled
2013/02/18 21:12:11 B63ECB70 c anonymous disconnected from xxxxxxxx
2013/02/18 21:12:11 B63ECB70 c thread B63ECB70 ended!
2013/02/18 21:12:12 B63ECB70 c encrypted cccam-client xxxxxxx granted (aysun, au=off)
2013/02/18 21:12:16 B73FAB70 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2013/02/18 21:12:16 B73FAB70 r Error processing ecm for caid 09AF, srvid 04E2 (servicename: 09AF:04E2 unknown) on reader telecolumbus.
2013/02/18 21:12:16 B63ECB70 c housekeeping lb stats thread started
2013/02/18 21:12:16 B63ECB70 c aysun (09AF&000000/04E2/57:508B): not found (157 ms) by telecolumbus (of 1 avail 1)
2013/02/18 21:12:26 B63ECB70 c aysun (09AF&000000/04E2/57:7093): rejected group (0 ms) (of 0 avail 1) (no matching reader)
2013/02/18 21:12:36 B63ECB70 c aysun (09AF&000000/04E2/57:77D1): rejected group (0 ms) (of 0 avail 1) (no matching reader)
2013/02/18 21:12:46 B63ECB70 c aysun (09AF&000000/04E2/57:23FA): rejected group (0 ms) (of 0 avail 1) (no matching reader)
2013/02/18 21:12:56 B63ECB70 c aysun (09AF&000000/04E2/57:98EC): rejected group (0 ms) (of 0 avail 1) (no matching reader)

 

[dersimlicemo]

AW: Telecolumbus mit oscam

keine ne idee also ja? schade. bitte tread löschen.

 

[Richie880]

AW: Telecolumbus mit oscam

Hi habe die karte nicht aber versuch das mal

Spoiler

[reader]
label = telecolumbus
protocol = smartreader
device = Serial:Reader B5DCCEB
caid = 09AF
boxid = 87654321
boxkey = 1122334455667788
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,1,2

und zeig mal alle conf von clint .

benutzt du service?

und zeig mal user vom server

MFg

Richie

 

[dersimlicemo]

AW: Telecolumbus mit oscam

Spoiler

[global]
logfile = /var/log/ipc/OScam.log
clienttimeout = 9000
nice = -1
maxlogsize = 0
readerrestartseconds = 2
dropdups = 1
lb_mode = 3


[newcamd]
key = 0102030405060708091011121314
port = 22000@ 09AF:000000
keepalive = 1



[monitor]
port = 905
monlevel = 4

[webif]
httpport = 1010
httpuser = user
httppwd = pass
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = meine.dyndns.org

Spoiler

[reader]
label = telecolumbus
protocol = smartreader
device = Serial:Reader F4A5A24
pincode = xxxx
caid = 09AF
ident = 09AF:000000
boxid = 87654321
boxkey = 1122334455667788
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

Spoiler

[account]
user = cccam
pwd = cccam
hostname = localhost
caid = 09AF
au = telecolumbus
group = 1
ident = 09AF:000000

Spoiler

>> OSCam << cardserver started at Thu Mar 7 00:07:13 2013
-------------------------------------------------------------------------------
2013/03/07 00:07:13 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8416 (i486-linux-gnu)
2013/03/07 00:07:13 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1472
2013/03/07 00:07:13 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/03/07 00:07:13 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/03/07 00:07:13 0 s signal handling initialized
2013/03/07 00:07:14 0 s 1 service-id's loaded in 9ms
2013/03/07 00:07:14 0 s ERROR: Cannot open file "/var/etc/oscam.tiers" (errno=2 No such file or directory)
2013/03/07 00:07:14 0 s ERROR: Cannot open file "/var/etc/oscam.provid" (errno=2 No such file or directory)
2013/03/07 00:07:14 0 s ERROR: Cannot open file "/var/etc/oscam.guess" (errno=2 No such file or directory)
2013/03/07 00:07:14 0 s ERROR: Cannot open file "/var/etc/oscam.ird" (errno=2 No such file or directory)
2013/03/07 00:07:14 0 s ERROR: Cannot open file "/var/etc/oscam.whitelist" (errno=2 No such file or directory)
2013/03/07 00:07:14 0 s ERROR: Cannot open file "/var/etc/oscam.cacheex" (errno=2 No such file or directory)
2013/03/07 00:07:14 0 s monitor: initialized (fd=5, port=905)
2013/03/07 00:07:14 0 s newcamd: initialized (fd=6, port=22000)
2013/03/07 00:07:14 0 s -> CAID: 09AF PROVID: 000000
2013/03/07 00:07:14 0 s telecolumbus [smartreader] creating thread for device Serial:Reader F4A5A24
2013/03/07 00:07:14 A0E03C8 h dvbapi: HTTP Server listening on port 1010
2013/03/07 00:07:14 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/07 00:07:14 0 s waiting for local card init
2013/03/07 00:07:14 A0E1B70 r telecolumbus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/03/07 00:07:14 A0E1B70 r Found reader with serial Reader F4A5A24 at 005:002
2013/03/07 00:07:14 A0E1B70 r Found smartreader device Serial:Reader F4A5A24
2013/03/07 00:07:14 A0E1B70 r telecolumbus [smartreader] Reader initialized (device=Serial:Reader F4A5A24, detect=cd, mhz=357, cardmhz=357)
2013/03/07 00:07:15 A0E1B70 r telecolumbus [smartreader] card detected
2013/03/07 00:07:18 A0E1B70 r telecolumbus [smartreader] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/03/07 00:07:19 A0E1B70 r telecolumbus [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/03/07 00:07:19 A0E1B70 r telecolumbus [smartreader] Calculated work ETU is 26.05 us
2013/03/07 00:07:19 A0E1B70 r telecolumbus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/03/07 00:07:20 A0E1B70 r telecolumbus [smartreader] Card type: T7TV
2013/03/07 00:07:20 A0E1B70 r telecolumbus [smartreader] Rom version: 10A3
2013/03/07 00:07:21 A0E1B70 r telecolumbus [smartreader] parental lock setting: FF FF FF FF
2013/03/07 00:07:21 A0E1B70 r telecolumbus [smartreader] type: VideoGuard Telecolumbus (09AF), caid: 09AF
2013/03/07 00:07:21 A0E1B70 r telecolumbus [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2013/03/07 00:07:21 A0E1B70 r telecolumbus [smartreader] ready for requests
2013/03/07 00:07:21 A0E1B70 r telecolumbus [smartreader] found card system videoguard2
2013/03/07 00:07:21 A0E1B70 r telecolumbus [videoguard2] card detected
2013/03/07 00:07:21 A0E1B70 r telecolumbus [videoguard2] type: VideoGuard Telecolumbus (09AF)
2013/03/07 00:07:30 0 s init for all local cards done
2013/03/07 00:07:30 0 s anti cascading disabled
2013/03/07 00:07:30 A0E94F8 c client connected to 22000 port
2013/03/07 00:07:30 0 --- Skipped 1 duplicated log lines ---
2013/03/07 00:07:30 A0E94F8 c anonymous disconnected from 127.0.0.1
2013/03/07 00:07:30 A0EACA0 c localhost: resolved ip=127.0.0.1
2013/03/07 00:07:30 A0EACA0 c encrypted newcamd:22000-client 127.0.0.1 granted (cccam, au=on (1 reader))
2013/03/07 00:07:30 A0EACA0 c user cccam authenticated successfully (CCcam)
2013/03/07 00:07:30 A0EACA0 c AU enabled for user cccam on reader telecolumbus

- - - - - - - - - -

Spoiler

>> OSCam << cardserver started at Thu Mar 7 00:42:20 2013
-------------------------------------------------------------------------------
2013/03/07 00:42:20 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8416 (i486-linux-gnu)
2013/03/07 00:42:20 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6984
2013/03/07 00:42:20 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/03/07 00:42:20 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/03/07 00:42:20 0 s signal handling initialized
2013/03/07 00:42:20 0 s 1 service-id's loaded in 0ms
2013/03/07 00:42:20 0 s ERROR: Cannot open file "/var/etc/oscam.tiers" (errno=2 No such file or directory)
2013/03/07 00:42:20 0 s ERROR: Cannot open file "/var/etc/oscam.provid" (errno=2 No such file or directory)
2013/03/07 00:42:20 0 s ERROR: Cannot open file "/var/etc/oscam.guess" (errno=2 No such file or directory)
2013/03/07 00:42:20 0 s ERROR: Cannot open file "/var/etc/oscam.ird" (errno=2 No such file or directory)
2013/03/07 00:42:20 0 s ERROR: Cannot open file "/var/etc/oscam.whitelist" (errno=2 No such file or directory)
2013/03/07 00:42:20 0 s ERROR: Cannot open file "/var/etc/oscam.cacheex" (errno=2 No such file or directory)
2013/03/07 00:42:20 0 s monitor: initialized (fd=5, port=905)
2013/03/07 00:42:20 0 s newcamd: initialized (fd=6, port=22000)
2013/03/07 00:42:20 0 s -> CAID: 09AF PROVID: 000000
2013/03/07 00:42:20 A0E03C8 h dvbapi: HTTP Server listening on port 1212
2013/03/07 00:42:20 0 s telecolumbus [smartreader] creating thread for device Serial:Reader F4A5A24
2013/03/07 00:42:20 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/07 00:42:20 0 s waiting for local card init
2013/03/07 00:42:20 A0E1B70 r telecolumbus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/03/07 00:42:20 A0E1B70 r Found reader with serial Reader F4A5A24 at 005:002
2013/03/07 00:42:20 A0E1B70 r Found smartreader device Serial:Reader F4A5A24
2013/03/07 00:42:20 A0E1B70 r telecolumbus [smartreader] Reader initialized (device=Serial:Reader F4A5A24, detect=cd, mhz=357, cardmhz=357)
2013/03/07 00:42:21 A0E1B70 r telecolumbus [smartreader] card detected
2013/03/07 00:42:24 A0E1B70 r telecolumbus [smartreader] ATR: 3F 7D 13 25 02 41 B0 03 69 FF 4A 50 F0 80 00 54 37 03
2013/03/07 00:42:25 A0E1B70 r telecolumbus [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2013/03/07 00:42:25 A0E1B70 r telecolumbus [smartreader] Calculated work ETU is 26.05 us
2013/03/07 00:42:25 A0E1B70 r telecolumbus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/03/07 00:42:26 A0E1B70 r telecolumbus [smartreader] Card type: T7TV
2013/03/07 00:42:26 A0E1B70 r telecolumbus [smartreader] Rom version: 10A3
2013/03/07 00:42:27 A0E1B70 r telecolumbus [smartreader] parental lock setting: FF FF FF FF
2013/03/07 00:42:27 A0E1B70 r telecolumbus [smartreader] type: VideoGuard Telecolumbus (09AF), caid: 09AF
2013/03/07 00:42:27 A0E1B70 r telecolumbus [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2013/03/07 00:42:27 A0E1B70 r telecolumbus [smartreader] ready for requests
2013/03/07 00:42:27 A0E1B70 r telecolumbus [smartreader] found card system videoguard2
2013/03/07 00:42:27 A0E1B70 r telecolumbus [videoguard2] card detected
2013/03/07 00:42:27 A0E1B70 r telecolumbus [videoguard2] type: VideoGuard Telecolumbus (09AF)
2013/03/07 00:42:34 0 s init for all local cards done
2013/03/07 00:42:34 0 s anti cascading disabled
2013/03/07 00:42:34 A0EA860 c client connected to 22000 port
2013/03/07 00:42:34 A0EA860 c anonymous disconnected from 127.0.0.1
2013/03/07 00:42:39 A0EC008 c client connected to 22000 port
2013/03/07 00:42:39 A0EC008 c localhost: resolved ip=127.0.0.1
2013/03/07 00:42:39 A0EC008 c encrypted newcamd:22000-client 127.0.0.1 granted (cccam, au=on (1 reader))
2013/03/07 00:42:39 A0EC008 c user cccam authenticated successfully (CCcam)
2013/03/07 00:42:39 A0EC008 c AU enabled for user cccam on reader telecolumbu

 

[solo1999]

AW: Telecolumbus mit oscam

Hallo,

ich hatte auch mal eine 09AF. Ich habe immer mit einer Service gearbeitet. Vielleicht hilft das.

 

[4gx35]

AW: Telecolumbus mit oscam

geht die Karte denn im receiver und was wird damit noch alles hell ?
werden denn im Webif bei CardOk entitlements angezeigt, die fehlen hier im log irgendwie

 

[dersimlicemo]

AW: Telecolumbus mit oscam

Hier mein Log. CardOk habe ich zu stehen.

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Mar 7 18:28:13 2013
-------------------------------------------------------------------------------
2013/03/07 18:28:13 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8416 (i486-linux-gnu)
2013/03/07 18:28:13 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6717
2013/03/07 18:28:13 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/03/07 18:28:13 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/03/07 18:28:13 0 s signal handling initialized
2013/03/07 18:28:13 0 s 1 service-id's loaded in 0ms
2013/03/07 18:28:13 0 s ERROR: Cannot open file "/var/etc/oscam.tiers" (errno=2 No such file or directory)
2013/03/07 18:28:13 0 s ERROR: Cannot open file "/var/etc/oscam.provid" (errno=2 No such file or directory)
2013/03/07 18:28:13 0 s ERROR: Cannot open file "/var/etc/oscam.guess" (errno=2 No such file or directory)
2013/03/07 18:28:13 0 s ERROR: Cannot open file "/var/etc/oscam.ird" (errno=2 No such file or directory)
2013/03/07 18:28:13 0 s ERROR: Cannot open file "/var/etc/oscam.whitelist" (errno=2 No such file or directory)
2013/03/07 18:28:13 0 s ERROR: Cannot open file "/var/etc/oscam.cacheex" (errno=2 No such file or directory)
2013/03/07 18:28:13 0 s monitor: initialized (fd=5, port=905)
2013/03/07 18:28:13 0 s cccam: initialized (fd=6, port=18000)
2013/03/07 18:28:13 0 s telecolumbus [smartreader] creating thread for device Serial:Reader F4A5A24
2013/03/07 18:28:13 918B3D8 h dvbapi: HTTP Server listening on port 1010
2013/03/07 18:28:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/07 18:28:13 0 s waiting for local card init
2013/03/07 18:28:13 918CB80 r telecolumbus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/03/07 18:28:13 918CB80 r Found reader with serial Reader F4A5A24 at 005:002
2013/03/07 18:28:13 918CB80 r Found smartreader device Serial:Reader F4A5A24
2013/03/07 18:28:13 918CB80 r telecolumbus [smartreader] Reader initialized (device=Serial:Reader F4A5A24, detect=cd, mhz=357, cardmhz=357)
2013/03/07 18:28:14 918CB80 r telecolumbus [smartreader] card detected
2013/03/07 18:28:17 918CB80 r telecolumbus [smartreader] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/03/07 18:28:18 918CB80 r telecolumbus [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2013/03/07 18:28:18 918CB80 r telecolumbus [smartreader] Calculated work ETU is 6.51 us
2013/03/07 18:28:18 918CB80 r telecolumbus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/03/07 18:28:20 918CB80 r telecolumbus [smartreader] Card type: T7TV
2013/03/07 18:28:20 918CB80 r telecolumbus [smartreader] Rom version: 10A3
2013/03/07 18:28:20 918CB80 r telecolumbus [smartreader] parental lock setting: FF FF FF FF
2013/03/07 18:28:20 918CB80 r telecolumbus [smartreader] type: VideoGuard Telecolumbus (09AF), caid: 09AF
2013/03/07 18:28:20 918CB80 r telecolumbus [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2013/03/07 18:28:20 918CB80 r telecolumbus [smartreader] ready for requests
2013/03/07 18:28:20 918CB80 r telecolumbus [smartreader] found card system videoguard2
2013/03/07 18:28:20 918CB80 r telecolumbus [videoguard2] card detected
2013/03/07 18:28:20 918CB80 r telecolumbus [videoguard2] type: VideoGuard Telecolumbus (09AF)
2013/03/07 18:28:27 0 s init for all local cards done
2013/03/07 18:28:27 0 s anti cascading disabled xxx.xxx.xxx.xxx
2013/03/07 18:28:30 919A998 c encrypted cccam-client xxx.xxx.xxx.xxx granted (aysun, au=on (1 reader))
2013/03/07 18:28:38 918CB80 r telecolumbus [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2013/03/07 18:28:38 919A998 c aysun (09AF&000000/0000/001A/92:605B53A5062938F4BF06BF7EAF8245C4): not found (158 ms) by telecolumbus

geht die Karte denn im receiver und was wird damit noch alles hell ?
werden denn im Webif bei CardOk entitlements angezeigt, die fehlen hier im log irgendwie

die karte läuft im KAOn receiver ja.

 

[4gx35]

AW: Telecolumbus mit oscam

mach es mal ohne newcamd Link ist nicht mehr aktiv.
loadbalancing mal abschalten, welche kaerten hast du denn noch ?
wie viele entitlements stehen bei cardok ?

 

[dersimlicemo]

AW: Telecolumbus mit oscam

Spoiler

[global]
logfile = /var/log/ipc/OScam.log
clienttimeout = 9000
nice = -1
maxlogsize = 0
readerrestartseconds = 2
dropdups = 1
lb_mode = 3


#[newcamd]
#key = 0102030405060708091011121314
#port = 22000@09AF:000000
#keepalive = 1



[monitor]
port = 905
monlevel = 4

[webif]
httpport = 1010
httpuser = user
httppwd = pass
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = meine.dyndns.org

newcamd ist aus.

habe nur eine karte.

entitlements sind keine zu sehen. wenn ich auf entitlements klicke sehe ich die ATR, serial etc.

 

[4gx35]

AW: Telecolumbus mit oscam

lb_mode = 0 setzen, 3 ist falsch, wo ist [cccam] in oscam.conf ?(in Oscam Anleitung nachsehn)
deine lokale box verwendet doch sicher CCcam oder Oscam ?
vermute, dass deine reader einstellung nicht stimmt

 

[dersimlicemo]

AW: Telecolumbus mit oscam

das ist die neue oscam.config

Spoiler

[global]
logfile = /var/log/ipc/OScam.log
clienttimeout = 9000
nice = -1
maxlogsize = 1
readerrestartseconds = 2
dropdups = 1



#[newcamd]
#key = 0102030405060708091011121314
#port = 22000@09AF:000000
#keepalive = 1



[cccam]
port = 12002
nodeid = FED2E805107B157C
version = 2.3.0
stealth = 1

[monitor]
port = 905
monlevel = 4

[webif]
httpport = xxxxx
httpuser = xxxxxx
httppwd = xxxxx
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = meine.dyndns.org

 

[Idefix!]

AW: Telecolumbus mit oscam

Ich sage nur pairing! Mit der Karte laufen nur die Schrott-RTL-Sender und Co.!
Da wirst du wohl nichts machen können.

 

[kindl]

AW: Telecolumbus mit oscam

Das hat nix mit pairing zu tun, da das pairing nur die hd sender bei TC betrifft.
Die caid 09AF wird nicht mehr, mit den aktuellen oscam versionen per mouse - bzw smartreader-protokolle gelesen...die tatsache ist auch schon ein recht alter hut.
Ich besitze selber eine TC-basis karte, caid 09AF..., diese läuft per oscam, klaglos in der dreambox (interner slot)...seit ca 2 jahren.
Mit smargo oder easymouse ist jedoch nix zu machen...mehr ist dazu momentan auch nicht zu sagen.

 

[mgakk]

AW: Telecolumbus mit oscam

mit welchen Protokoll wird sie denn in der neuen oscam gelesen?

 

[4gx35]

AW: Telecolumbus mit oscam

wenn ich es richtig verstanden habe nur mit "internal"

aber du hast doch eine Dbox2, die kann oscam, vieleicht mal versuchen,
dann als proxyeader im server verwenden