Is their allready a new primo maps for this version to download?
- - - aktualisiert - - -
I made a translation with google, perhaps someone wants to take a look at it to see if the translation is correct?
Installation Guide Alpine INA -W910R
Attention! All changes on the device at your own risk !
A stylus for installation is an advantage. The files that want to copy your on the device , you still have to copy itself to the SD card. With the tool, Total Commander, the new files are copied to the device.
The structure and as Total Commander can read your work here . (Thanks to rocket chef for instructions)
Total Commander
1 Create backup of the original version.
1.1 Therefore , the Synctool provided by Alpine / Naviextras be taken . How do you get the information from the device to the SD card, is described in the Support area of Alpine. After start Naviextras Toolbox you are asked whether a backup should be made on the PC. Confirm with yes . Please note that with this Synctool not a complete backup of the folder of Alpine is located on the Flash Drive created . To create a complete backup of see point 1.2 .
1.2 The second option is to back up the entire folder with Alpine Total Commander . It makes sense if the device is to be sold , since then all the data will be copied back onto the device in its original state can .
2 SD card format and copy the contents from the Alpine folder from my download to the root directory of the SD card.
3 Press INA -W910R is switched and the Map button.
4 Insert the SD card, connect your monitor and press Map button. The navigation program is finished (takes one instant )
5 It opens the windows of WinCE where the drives and folders are visible. The SD card is named SDMMC the INA -W910R .
Double-click on SDMMC the contents of the SD card is visible.
6 Open the folder and INA Total Commander start by double-click.
7 With a double click in the right pane to Flash Drive / Alpine you open the folder where are the
iGO Primo files.
8 Mark the original AlpineNavi.exe (must be deposited Blue) Clear and with Total Commander or rename according to eg old_AlpineNavi . The keyboard in the Total Commander is hidden. To recall this , tap the bottom right of the button and enter the keyboard.
9 With a double click in the left pane, click SDMMC / Alpine / New You open the folder where the files are located on the unit which your want to copy. The AlpineNavi.exe located in the New folder Mark (must be blue background).
10 Now copy the highlighted file . Do this by pressing the button as shown in the instructions. The newly opened query window must be confirmed with " Copy". The rest you can refer to the manual.
11 Other files are copied to the device according to the same procedure .
12 After all the files to be copied on the device , the SD card and remove the device Restart . It takes up the Navi boot slightly again .
Support thread for this offer
- - - aktualisiert - - -
When I do step 3, so with a pen I press INAw910R, and the map button at the same time. I only turns off, whats going wrong over here?
)
