Archiv / Down Support zu iGO Primo - Teil 1

------------------------------------------------------
------------------------------------------------------
------------------ Crash Log Begin -------------------


Current System time: "2010-06-04 22:03:48"
Build version: 8.5.9.142948
Build configuration: Product--ARCHFAM
OS version: 6.0

Uptime: 0 h 0 m 2 sec 0 msec
Memory Stats:

FreeMemory: 73 MB, 992 KB, 0 B
TotalUseableMemory: 75 MB, 92 KB, 0 B
MaxMemory: 129 MB, 0 KB, 0 B
ReservedMemory: 1 MB, 0 KB, 0 B
ActualCacheSize: 0 MB, 0 KB, 0 B
GarbageSize: 0 MB, 0 KB, 0 B


Exception: 0xc0000005
At address: 0x006e703c
Access violation writing address: 0x3e50c40d
0x006e703c (A)


WinCE CallStack snapshot (function names unknown - map file \Disk\Programs\igo primo\iGO.map not found):

0x4002969c (A)
0x006a3af8 (A)
0x006a3150 (A)
0x006a3308 (A)
0x006a33d0 (A)
0x004e4784 (A)
0x40079494 (A)
0x40059b50 (A)
0x40053d20 (A)
0x4002a930 (A)
0x4002ac20 (A)
0x40053e20 (A)


Error message:

The application failed to start last time. Do you want to reset to factory defaults and lose all your POIs, tracks and settings?


Global status:

bInFocus: 0
bMouseDown: 0
bInLogic: 0
bInRender: 0
CurrentState[128]:
GPS Pos: (0.000000,0.000000)
Camera: pos0.000000,0.000000) rot:0 persp:0 zoom:0.000000 eng=0)


------------------- Crash Log End --------------------
------------------------------------------------------
------------------------------------------------------

[device]
; type="MIOC210" ; force device type
; typeid=4 ;In Igo8.exe: MIO device detected, use KernelIOControl method


[debug]
autosave=1
bringtotop_afterresume=1
buildneworderlist=1
cache=4096
compass_type=2
disable_3d=1 ;disables 3d buildings and roads
disable_outlookpoi=1 ;stops iGo from turning your contacts into POIs.
double_pixel_mode=2 ;3d mode fastdraw
doublepixel_stable_frame_time=500 ;time in ms before leavin fastdraw
earth=1
enable_buildings=0
enable_landmark_occlusion=1
enable_roadshow=1
enable_roadsign=1
fov=40
gnome_dem_files=1
hide_itiner_crossing=1
join_dual=0
lang_registry_2006=1
loop_sim=0
;max_memory=3088608 ; might've caused an error
mute_os_key=1 ;a value of 1 mutes the click noise from the OS when touching a touchscreen
no_file_cache=0
nortc=0 ;RTC = real time clock aka the devices internal clock
pin_sets_start=1
poi_labels=1
raster_quality=1
replay_tmc=1
reserve_memory=2097152
;run_on_mio_mantas=1
screen_calibration=1
show_arrows_on_route=1 ;little arrows in direction of route
show_device_type=0
show_gps_pos=1 ;this works again O)
show_lane_info=0
show_ltn=1
show_multinode_maneuvers=1
show_oneway_3d=1 ;3d arrows in the direction of travel on one way streets
show_oneway=1 ;Will either show on not show one way streets.
show_pedestrian=1
show_performance=1 ;cpu / mem / whatever bars on top of screen
show_plural=1
show_poi_areas=1
show_poi_boundingrects=1
show_priority_maneuvers=1
show_prohibited_maneuvers=0
show_rawdisplay_info=1 ;handy for seeing what igo chooses as display driver
show_residentonly=0
show_signpost=1
show_speed_limit=1 ;Will show the speed limit road sign on the corner of the screen
show_turn_penalty=1
sim_speed_factor_max=8.0
skip_eula=1 ;skips the End User License Agreement at start-up (only happens on first run anyways)
slowsim=0
smart_2d=1
sound_q_length=200
speedcam_enabled=1
split_dual=0
strap_waypoints=1
supress_highway_enter=0
supress_straight=0
supress_trivial_left=0
supress_trivial_right=0
tmc_all_stations=1
topmost=1
traincrossing=1
tts_expected_engine_delay=1400
tts_getaway_time=200
tts_min_ready_wav=1

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[folders]
app="/Disk/Programs/igo primo"
content="/Disk/Programs/igo primo/content"
data="/Disk/Programs/igo primo"

[gps]
port=8
baud=57600

[Interface]
show_exit = 1
resolution_dir="480_272"

[Rawdisplay]
autoconfig=1
extra_settings=1
class="auto"

highres=0
screen_x= 720
screen_y= 480
stretch=1

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[tts]
tts_buffer=66072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0

[warning]
speedcam_warning="1"

[RAWDISPLAY]
screen_x =480
screen_y =720
class=portrait
highres=0

[folders]
app="Disk/Programs/iGO8"

[interface]
show_exit=1
maxzoom2d=6000000
resolution_dir=480_720

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
announce_exit_direction=1

[Interface]
show_exit = 1
resolution_dir="480_272"
extra_settings=1

[Rawdisplay]
autoconfig=1
highres=0
screen_x=800
screen_y=480
stretch=1

[folders]
app="/Storage Card/Primo"
sdcardpath="/Storage Card/Primo"

[warning]
speedcam_warning="1"

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=0
ratio=0
gain=0

[sound]
ding=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
sound_q_length=200
tts_min_ready_wav= 1
tts_getaway_time=100
tts_expected_engine_delay=400

@norway und andere Spezies,
bin zu blöde, nach einer Änderung erkennt Primo die voice.zip nicht mehr...
wo ist der Trick, bitte?