AW: Smart MX40 CS über RS232 als client [Tutorial]
Hello, it's me again. Once again, thank you for your help.
I've got a new problem : I try to link my Smart MX 40 to a PC under Windows XP (I've try to do it on 2 different pc...), without any result.
The problem could be explained by the fact that I don't link the PC to the Smart receiver with a direct RS232 <> RS232 cable, but with a USB (PC) <> RS232 (Smart) cable.
1) I have installed the USB <> RS232 driver on the PC
2) I have patched the SMART MX 40 with the 3.26 FW
3) I processed F6+1+1+1 (making H111 on the smart screen)
4) I chose "003 PC Card Sharing ECM" on the tv screen and pressed OK
5) I plugged the USB cable in my pc (the rs232 is correctly plugged in the SMART MX 40)
6) NOTHING happens... no "new device wizard", not any sound, not any HDD noise, nothing in the device manager in the USB devices nor in the COM devices.
Well, the RS232 plug seems to be "dumb", "mute", "dead", etc...
I have inverted the #2 and #3 wires and the diagnostic is the same : nothing happens.
Help me please !
And now... in bad german...
Hallo, ist es ich wieder. Noch einmal danke für Ihre Hilfe.
Ich habe ein neues Problem:
Ich versuche, mein Smart MX 40 mit einem PC unter Windows Xp (ich versuchte, es auf unterschiedlichem PC 2 zu tun…), zu verbinden, ohne irgendein Resultat.
Das Problem könnte durch die Tatsache, dass ich den PC nicht mit dem Smart Empfänger mit einem direkten RS232 RS232 Kabel verbinde, aber mit einem (Smart MX40) Kabel RS232 erklärt werden USB-(PC).
1) Ich habe den Fahrer USB-RS232 auf den PC angebracht
2) Ich habe das Smart MX 40 mit den 3.26 FW ausgebessert
3) Ich verarbeitete F6+1+1+1 (H111 auf dem Smart Schirm bildend)
4) Ich wählte "003 PC Card Sharing ECM" teilt; auf dem Fernsehschirm und O.K. betätigt
5) Ich verstopfte das USB-Kabel in meinem PC (dem rs232 wird richtig das Smart MX 40 angeschlossen)
6) NICHTS geschieht… kein "new device wizard" , kein Ton, keine HDD Geräusche, nichts im Vorrichtungsmanager in den USB-Vorrichtungen noch in den COM-Vorrichtungen. Gut scheint der Stecker RS232, " zu sein; dumb" , " mute" , " dead" , ETC….
Ich habe das #2 umgewandelt und Drähte #3 und die Diagnose ist die selben: nichts geschieht.
Helfen Sie mir bitte!