Smargo defekt?

[Saccara]

hi,

ich habe nun Stunden damit verbracht mein Smargo mit oscam einzurichten. Aber irgendwie bin ich wohl zu doof oder ich übersehe was oder ich habe eine defekten Smargo?

Habe yavdr 0.5 am laufen und von Gandalf oscam und dvbapi installiert.

Ich kann irgendwie meinen Cardreader nicht ansprechen. Wenn ich den auf /dev/ttyUSB0 anspreche kommt in der oscam.log als Fehler

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Mon Nov 25 01:57:34 2013
-------------------------------------------------------------------------------
2013/11/25 01:57:34  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:34        0   >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r8699 (x86_64-linux-gnu)
2013/11/25 01:57:34  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:35  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:35  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:35  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:36  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:36  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:36  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:37  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:37  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:37  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:37  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:37  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:38  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:38  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:38  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:39  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!2013/11/25 01:57:37  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:37  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 01:57:37  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 01:57:38  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
 1Hilfe                  2Speichern               3Markieren               4Ersetzen                5Kopieren                6Verschieben             7Suchen                  8Löschen                 9Menüs                  10Beenden

Ich habe mich hier mal eingelesen

Sie müssen registriert sein, um Links zu sehen.

und auch mal

lsusb

eingegeben, da kommt als Ergebnis

Spoiler

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 004: ID 0471:060d Philips (or NXP) Consumer Infrared Transceiver (SRM5100)

Also ist doch der Smargo über 002:003 zu erreichen richtig?

Normalerweise sieht meine oscam.server so aus

Spoiler

[COLOR=#333333][reader] [/COLOR]
[COLOR=#333333]Label = hdplus [/COLOR]
[COLOR=#333333]Protocol = mouse [/COLOR]
[COLOR=#333333]Device = /dev/ttyUSB0[/COLOR]
[COLOR=#333333]smargopatch = 1[/COLOR]
[COLOR=#333333]caid = 1843 [/COLOR]
[COLOR=#333333]Mhz = 368 [/COLOR]
[COLOR=#333333]Detect = CD [/COLOR]
[COLOR=#333333]Group = 1 [/COLOR]
[COLOR=#333333]CAID = 1843 [/COLOR]
[COLOR=#333333]EMMCache = 1,3,2 [/COLOR]
[COLOR=#333333]rsakey = xxx[/COLOR]
[COLOR=#333333]boxkey =xxxx[/COLOR]
[COLOR=#333333]audisabled = 0
[/COLOR]

Ich also mal als Protocol "smartreader" und als Device 002:003 eingetragen, aber da findet er dann auch kein Device

Weiß jemand was mein Gedankenfehler ist? Habe auch /dev/ttyUSB1 und /dev/ttyUSB2 ausprobiert, bringt auch nichts.

 

[Radagast]

AW: Smargo defekt?

Hi,

wie hast du denn den Smargo als solchen eingestellt und was sagt das Logfile zur Erkennung der Karte als solche? Also bitte mal das Logfile posten, in dem zu sehen ist wie OScam versucht den Reader zu initialisieren.

 

[Saccara]

AW: Smargo defekt?

hmm, wo soll das stehen? In der oscam.log fängt alles direkt so an:

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Mon Nov 25 10:53:31 2013
-------------------------------------------------------------------------------
2013/11/25 10:53:31  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 10:53:31        0   >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r8699 (x86_64-linux-gnu)
2013/11/25 10:53:32  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 10:53:32  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 10:53:32  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 10:53:33  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 10:53:33  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 10:53:33  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 10:53:33  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 10:53:34  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 10:53:34  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 10:53:34  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!
2013/11/25 10:53:35  1295AB0 c [DVBAPI] Demuxer #0 no suitable readers found for ecmpids in PMT that can be used for decoding!
2013/11/25 10:53:35  1295AB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 6 ecmpids!

 

[Radagast]

AW: Smargo defekt?

Hi,

dein Logfile fängt aber an mit:

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Mon Nov 25 10:53:31 2013
-------------------------------------------------------------------------------

Das bedeutet soviel wie das Logfile wurde gewechselt. Starte OScam mal neu und lösche sicherheitshalber vorher das bestehende Logfile. Da kommen dann ganz andere Angaben.

 

[Saccara]

AW: Smargo defekt?

Da kommt dann nun

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Nov 25 11:15:43 2013
-------------------------------------------------------------------------------
2013/11/25 11:15:43        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r8699 (x86_64-linux-gnu)
2013/11/25 11:15:43        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6236
2013/11/25 11:15:43        0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/11/25 11:15:43        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/11/25 11:15:43        0 s signal handling initialized
2013/11/25 11:15:43        0 s 240 service-id's loaded in 0ms
2013/11/25 11:15:43        0 s 140 tier-id's loaded
2013/11/25 11:15:43        0 s 23 provid's loaded
2013/11/25 11:15:43        0 s cccam: initialized (fd=6, port=22765)
2013/11/25 11:15:43        0 s hdplus [mouse] creating thread for device /dev/ttyUSB0
2013/11/25 11:15:43        0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/11/25 11:15:43        0 s waiting for local card init
2013/11/25 11:15:43 9C0008C0 h webif: decompressed 52419 bytes back into 151576 bytes
2013/11/25 11:15:43 9C0008C0 h HTTP Server running. ip=:: port=8083
2013/11/25 11:15:43  110B2D0 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=357)
2013/11/25 11:15:44  110B2D0 r hdplus [mouse] card detected
2013/11/25 11:15:44  110B2D0 r hdplus [mouse] ATR: 00 00
2013/11/25 11:15:44  110B2D0 r hdplus [mouse] ERROR: Could not read reader->convention
2013/11/25 11:15:44  110B2D0 r hdplus [mouse] Error activating card.
2013/11/25 11:15:45  110B2D0 r hdplus [mouse] ATR: 00 00
2013/11/25 11:15:45  110B2D0 r hdplus [mouse] ERROR: Could not read reader->convention
2013/11/25 11:15:45  110B2D0 r hdplus [mouse] Error activating card.
2013/11/25 11:15:46  110B2D0 r hdplus [mouse] ATR: 00 00
2013/11/25 11:15:46  110B2D0 r hdplus [mouse] ERROR: Could not read reader->convention
2013/11/25 11:15:46  110B2D0 r hdplus [mouse] Error activating card.
2013/11/25 11:15:46  110B2D0 r hdplus [mouse] card initializing error
2013/11/25 11:15:47        0 s init for all local cards done
2013/11/25 11:15:47        0 s anti cascading log initialized
2013/11/25 11:15:47  111DDD0 c plain dvbapi-client granted (vdr, au=auto (1 reader))
2013/11/25 11:15:47  111DDD0 c Detected /dev/dvb/adapter0/demux0 Api: 0

 

[czutok]

AW: Smargo defekt?

Protocol = smartreader
Device = 002:003

 

[Radagast]

AW: Smargo defekt?

Hi,

da stimmen wohl die Eintsellungen des Smargo als solches noch nicht. Zumindest wird der Cardreader ja schonmal gefunden. Aber zu der Frage

wie hast du denn den Smargo als solchen eingestellt

kam ja leider noch keine Antwort.

 

[Saccara]

AW: Smargo defekt?

Im ersten Posting hatte ich doch das notiert, oder sind das die falschen Angaben?

[reader]
Label = hdplus
Protocol = mouse
Device = /dev/ttyUSB0
smargopatch = 1
caid = 1843
Mhz = 368
Detect = CD
Group = 1
CAID = 1843
EMMCache = 1,3,2
rsakey = xxx
boxkey =xxxx
audisabled = 0

 

[czutok]

AW: Smargo defekt?

smargopatch = 1

kanst gleich löschen oder mit # auskomendiren

 

[Saccara]

AW: Smargo defekt?

Und laut Settings Tool ist es eingestellt mit:

Mode: Auto
Frequency: 3,69
Kernel Type: NEW
T Mode T0
EGT: 0
Bei DEVICE NAME steht bei mir nichts

 

[Saccara]

AW: Smargo defekt?

Kommentiere ich smargopatch aus und starte oscam erneut kommt das

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Nov 25 11:56:46 2013
-------------------------------------------------------------------------------
2013/11/25 11:56:46        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r8699 (x86_64-linux-gnu)
2013/11/25 11:56:46        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8839
2013/11/25 11:56:46        0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/11/25 11:56:46        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/11/25 11:56:46        0 s signal handling initialized
2013/11/25 11:56:46        0 s 240 service-id's loaded in 0ms
2013/11/25 11:56:46        0 s 140 tier-id's loaded
2013/11/25 11:56:46        0 s 23 provid's loaded
2013/11/25 11:56:46        0 s cccam: initialized (fd=6, port=22765)
2013/11/25 11:56:46        0 s hdplus [mouse] creating thread for device /dev/ttyUSB0
2013/11/25 11:56:46        0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/11/25 11:56:46        0 s waiting for local card init
2013/11/25 11:56:46   BF62D0 r hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2013/11/25 11:56:46   BF62D0 r hdplus [mouse] Cannot open device: /dev/ttyUSB0
2013/11/25 11:56:46 740008C0 h webif: decompressed 52419 bytes back into 151576 bytes
2013/11/25 11:56:46 740008C0 h HTTP Server running. ip=:: port=8083
2013/11/25 11:57:46   BF62D0 r hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2013/11/25 11:57:46   BF62D0 r hdplus [mouse] Cannot open device: /dev/ttyUSB0

- - - - - - - - - -

Vergesst meinen letzten Post, ich Idiot hatte den Reader noch bei mir am Win PC zum auslesen, einen Moment :agree:

 

[czutok]

AW: Smargo defekt?

Protocol = smartreader
Device = 002:003

 

[Saccara]

AW: Smargo defekt?

Nun ist der Reader angeschlossen, oscam neu gestartet, da kommt nun

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Mon Nov 25 12:01:41 2013
-------------------------------------------------------------------------------
2013/11/25 12:01:41        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r8699 (x86_64-linux-gnu)
2013/11/25 12:01:41        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 9131
2013/11/25 12:01:41        0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/11/25 12:01:41        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/11/25 12:01:41        0 s signal handling initialized
2013/11/25 12:01:41        0 s 240 service-id's loaded in 1ms
2013/11/25 12:01:41        0 s 140 tier-id's loaded
2013/11/25 12:01:41        0 s 23 provid's loaded
2013/11/25 12:01:41        0 s cccam: initialized (fd=6, port=22765)
2013/11/25 12:01:41        0   >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r8699 (x86_64-linux-gnu)
2013/11/25 12:01:41        0 s hdplus [mouse] creating thread for device /dev/ttyUSB0
2013/11/25 12:01:41        0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/11/25 12:01:41        0 s waiting for local card init
2013/11/25 12:01:41 C40008C0 h webif: decompressed 52419 bytes back into 151576 bytes
2013/11/25 12:01:41 C40008C0 h HTTP Server running. ip=:: port=8083
2013/11/25 12:01:41  12A32D0 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=357)
2013/11/25 12:01:42  12A32D0 r hdplus [mouse] card detected
2013/11/25 12:01:42  12A32D0 r hdplus [mouse] ATR: 00 00
2013/11/25 12:01:42  12A32D0 r hdplus [mouse] ERROR: Could not read reader->convention
2013/11/25 12:01:42  12A32D0 r hdplus [mouse] Error activating card.
2013/11/25 12:01:43  12A32D0 r hdplus [mouse] ATR: 00 00
2013/11/25 12:01:43  12A32D0 r hdplus [mouse] ERROR: Could not read reader->convention
2013/11/25 12:01:43  12A32D0 r hdplus [mouse] Error activating card.
2013/11/25 12:01:44  12A32D0 r hdplus [mouse] ATR: 00 00
2013/11/25 12:01:44  12A32D0 r hdplus [mouse] ERROR: Could not read reader->convention
2013/11/25 12:01:44  12A32D0 r hdplus [mouse] Error activating card.
2013/11/25 12:01:45  12A32D0 r hdplus [mouse] card initializing error
2013/11/25 12:01:45        0 s init for all local cards done
2013/11/25 12:01:45        0 s anti cascading log initialized
2013/11/25 12:01:45  12B5B60 c plain dvbapi-client granted (vdr, au=auto (1 reader))
2013/11/25 12:01:45  12B5B60 c Detected /dev/dvb/adapter0/demux0 Api: 0

- - - - - - - - - -

Hmm, habe mal die Karte um 180 Grad gedreht, ist das so nun richtig?

Spoiler

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Nov 25 12:03:42 2013
-------------------------------------------------------------------------------
2013/11/25 12:03:42        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r8699 (x86_64-linux-gnu)
2013/11/25 12:03:42        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 9335
2013/11/25 12:03:42        0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/11/25 12:03:42        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/11/25 12:03:42        0 s signal handling initialized
2013/11/25 12:03:42        0 s 240 service-id's loaded in 0ms
2013/11/25 12:03:42        0 s 140 tier-id's loaded
2013/11/25 12:03:42        0 s 23 provid's loaded
2013/11/25 12:03:42        0 s cccam: initialized (fd=6, port=22765)
2013/11/25 12:03:42        0 s hdplus [mouse] creating thread for device /dev/ttyUSB0
2013/11/25 12:03:42        0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/11/25 12:03:42        0 s waiting for local card init
2013/11/25 12:03:42  80008C0 h webif: decompressed 52419 bytes back into 151576 bytes
2013/11/25 12:03:42  80008C0 h HTTP Server running. ip=:: port=8083
2013/11/25 12:03:42  21C92D0 r hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=357)
2013/11/25 12:03:44        0 s init for all local cards done
2013/11/25 12:03:44        0 s anti cascading log initialized
2013/11/25 12:03:44  21DBDD0 c plain dvbapi-client granted (vdr, au=auto (1 reader))
2013/11/25 12:03:44  21DBDD0 c Detected /dev/dvb/adapter0/demux0 Api: 0

 

[czutok]

AW: Smargo defekt?

ne einfache frage

ist die karte richtig in dem smargo eingesteckt ???

chip solte auf die seite sein wo die led leuchtet , in dem momment wo du die karte bis zum anschlag reinstekst , solte die led ausgehen und ab und zu blinken

 

[Saccara]

AW: Smargo defekt?

Habe meinen obigen Post bearbeitet, das 2. Log sieht besser aus oder?