Giova25
Ist gelegentlich hier
- Registriert
- 22. September 2009
- Beiträge
- 78
- Reaktionspunkte
- 1
- Punkte
- 8
Guten Abend !
Kann mir bitte jemand helfen.
Seit heute läuft meine V13 mit oscam nicht mehr.
Hab nix an den configs verändert und Karte ist frei.
Hier der log
[
meine oscam.server
oscam.conf
Kann mir bitte jemand helfen.
Seit heute läuft meine V13 mit oscam nicht mehr.
Hab nix an den configs verändert und Karte ist frei.
Hier der log
[
014/01/25 19:58:54 D0EBC0 r sky [smargo] smargo init type is smargo
2014/01/25 19:58:54 D108C0 h HTTP Server running. ip=0.0.0.0 port=8888
2014/01/25 19:58:54 D0EBC0 r sky [smargo] clocking for smartreader with smartreader protocol
2014/01/25 19:58:54 D0EBC0 r sky [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2014/01/25 19:58:55 D0EBC0 r sky [smargo] card detected
2014/01/25 19:59:01 D0EBC0 r sky [smargo] ATR:
2014/01/25 19:59:01 D0EBC0 r sky [smargo] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/25 19:59:01 D0EBC0 r sky [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2014/01/25 19:59:02 D0EBC0 r sky [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/25 19:59:03 D0EBC0 r sky [smargo] card system not supported
2014/01/25 19:59:03 D0EBC0 r sky [smargo] Normal mode failed, reverting to Deprecated Mode
2014/01/25 19:59:06 D0EBC0 r sky [smargo] ATR:
2014/01/25 19:59:06 D0EBC0 r sky [smargo] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/25 19:59:06 D0EBC0 r sky [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2014/01/25 19:59:06 D0EBC0 r sky [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/25 19:59:07 D0EBC0 r sky [smargo] card system not supported
2014/01/25 19:59:07 D0EBC0 r sky [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/25 19:59:07 D0EBC0 r sky [smargo] card initializing error
2014/01/25 19:59:08 0 s init for all local cards done
2014/01/25 19:59:08 0 s anti cascading disabled
2014/01/25 19:58:54 D108C0 h HTTP Server running. ip=0.0.0.0 port=8888
2014/01/25 19:58:54 D0EBC0 r sky [smargo] clocking for smartreader with smartreader protocol
2014/01/25 19:58:54 D0EBC0 r sky [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2014/01/25 19:58:55 D0EBC0 r sky [smargo] card detected
2014/01/25 19:59:01 D0EBC0 r sky [smargo] ATR:
2014/01/25 19:59:01 D0EBC0 r sky [smargo] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/25 19:59:01 D0EBC0 r sky [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2014/01/25 19:59:02 D0EBC0 r sky [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/25 19:59:03 D0EBC0 r sky [smargo] card system not supported
2014/01/25 19:59:03 D0EBC0 r sky [smargo] Normal mode failed, reverting to Deprecated Mode
2014/01/25 19:59:06 D0EBC0 r sky [smargo] ATR:
2014/01/25 19:59:06 D0EBC0 r sky [smargo] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/25 19:59:06 D0EBC0 r sky [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2014/01/25 19:59:06 D0EBC0 r sky [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/25 19:59:07 D0EBC0 r sky [smargo] card system not supported
2014/01/25 19:59:07 D0EBC0 r sky [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/25 19:59:07 D0EBC0 r sky [smargo] card initializing error
2014/01/25 19:59:08 0 s init for all local cards done
2014/01/25 19:59:08 0 s anti cascading disabled
meine oscam.server
[reader]
label = sky
protocol = smargo
device = /dev/ttyUSB0
caid = 09C4
detect = cd
mhz = 600
cardmhz = 600
ident = 09C4:000000,000001,000002,000003
group = 1
emmcache = 1,3,2
auprovid = 0009C4
boxid = 12345678
label = sky
protocol = smargo
device = /dev/ttyUSB0
caid = 09C4
detect = cd
mhz = 600
cardmhz = 600
ident = 09C4:000000,000001,000002,000003
group = 1
emmcache = 1,3,2
auprovid = 0009C4
boxid = 12345678
oscam.conf
[cccam]
port = 15545
version = 2.2.1
reshare = 0
keepconnect = 0
stealth = 1
[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 0
httpallowed = 192.168.178.58
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
port = 15545
version = 2.2.1
reshare = 0
keepconnect = 0
stealth = 1
[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 0
httpallowed = 192.168.178.58
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0