gelöst Seit Heute "Reader Device Error"

[16v]

Moin!

Kam von arbeit heim, wollte guggen, und meine Freetz 7530 meckert, dass sie den Reader nicht findet.

Log direkt bei Neustart:

Spoiler

2024/06/08 01:01:02 00000000 s (main) System name = Linux
2024/06/08 01:01:02 00000000 s (main) Host name = fritz.box
2024/06/08 01:01:02 00000000 s (main) Release = 4.4.60
2024/06/08 01:01:02 00000000 s (main) Version = #1 SMP PREEMPT 2021-04-26
2024/06/08 01:01:02 00000000 s (main) Machine = armv7l
2024/06/08 01:01:02 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5702
2024/06/08 01:01:02 00000000 s (config) userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2024/06/08 01:01:02 00000000 s (main) signal handling initialized
2024/06/08 01:01:02 00000000 s (config) 1170 service-id's loaded in 15 ms
2024/06/08 01:01:02 00000000 s (net) cccam: initialized (fd=5, port=13000)
2024/06/08 01:01:02 00000000 s (reader) triplereader00_hdplus [smargo] creating thread for device /dev/ttyUSB0
2024/06/08 01:01:02 00000000 s (main) waiting for local card init
2024/06/08 01:01:02 75AEB7C8 h (webif) webif: decompressed 176396 bytes back into 468888 bytes
2024/06/08 01:01:02 75AEB7C8 h (webif) HTTP Server running. ip=:: port=83
2024/06/08 01:01:02 7B1CFF6B r (reader) triplereader00_hdplus [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
2024/06/08 01:01:02 7B1CFF6B r (reader) triplereader00_hdplus [smargo] Cannot open device: /dev/ttyUSB0
2024/06/08 01:01:04 7B1CFF6B r (reader) triplereader00_hdplus [smargo] ERROR: Opening device /dev/ttyUSB0 (errno=6 No such device or address)
2024/06/08 01:01:04 7B1CFF6B r (reader) triplereader00_hdplus [smargo] Cannot open device: /dev/ttyUSB0

Und bei scan usb:lsusb: Failed to run or not installed!

Was will die denn von mir?

Gesendet von meinem SM-G975F mit Tapatalk

 

[Derek Buegel]

Es wird (mAn) nur angezeigt, das die USB-Anschlüsse da sind.
Es müsste etwa so aussehen:

Spoiler

root@raspberrypi ~ > lsusb -v | grep Serial
can't get device qualifier: Resource temporarily unavailable
Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
can't get device qualifier: Resource temporarily unavailable
  idProduct          0x6001 FT232 Serial (UART) IC
  iSerial                 3 A9KF7DH9
can't get debug descriptor: Resource temporarily unavailable
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
  idProduct          0x6001 FT232 Serial (UART) IC
  iSerial                 3 Reader 2B0E5A8
can't get debug descriptor: Resource temporarily unavailable
  iSerial                 0
  iSerial                 0
can't get debug descriptor: Resource temporarily unavailable
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
  iSerial                 1 3f980000.usb

 

[rolu2]

Hab ja nen TripleReader...
Aber keiner der 3 is ansprechbar.

Dann kauf dir entlich mal was gescheites, ich meine mich daran zu erinnern, das du damit schon mal Probleme hattest

 

[prisrak]

Dann liegt es tatsächlich an dem Gerät(en) selbst und nicht an der Fritz!Box

 

[16v]

Dann liegt es tatsächlich an dem Gerät(en) selbst und nicht an der Fritz!Box

Ja, an der vu wird der au ned wrkannt.

Dann kauf dir entlich mal was gescheites, ich meine mich daran zu erinnern, das du damit schon mal Probleme hattest

Das war der Stinger Dual, der ebenfalls nicht erkannt wurde.
Beim Triple wars nur problematisch, wie ich den ansprechen musste.
Und seither lief der wunderbar!

Da es diesen aber nicht mehr gibt, werd ich nun auf die mäuse umsteigen müssen.

Gesendet von meinem SM-G975F mit Tapatalk

Eidit:
Taugen die was?

Spoiler

Du musst Regestriert sein, um das angehängte Bild zusehen.

Gesendet von meinem SM-G975F mit Tapatalk

Edit:
Habe jetzt die mäuse...
O
Log:

Spoiler

2024/06/14 22:57:06 00000000 s (main) System name = Linux
2024/06/14 22:57:06 00000000 s (main) Host name = fritz.box
2024/06/14 22:57:06 00000000 s (main) Release = 4.4.271
2024/06/14 22:57:06 00000000 s (main) Version = #1 SMP PREEMPT 2022-12-15
2024/06/14 22:57:06 00000000 s (main) Machine = armv7l
2024/06/14 22:57:06 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5596
2024/06/14 22:57:06 00000000 s (config) userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2024/06/14 22:57:06 00000000 s (main) signal handling initialized
2024/06/14 22:57:06 00000000 s (config) 1170 service-id's loaded in 15 ms
2024/06/14 22:57:06 00000000 s (net) cccam: initialized (fd=5, port=13000)
2024/06/14 22:57:06 00000000 s (reader) Mouse_hdplus [mouse] creating thread for device /dev/ttyUSB0
2024/06/14 22:57:06 00000000 s (main) waiting for local card init
2024/06/14 22:57:06 1F607812 h (webif) webif: decompressed 176396 bytes back into 468888 bytes
2024/06/14 22:57:06 1F607812 h (webif) HTTP Server running. ip=:: port=83
2024/06/14 22:57:08 31C1E026 r (reader) Mouse_hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=369)
2024/06/14 22:57:08 31C1E026 r (reader) Mouse_hdplus [mouse] card detected
2024/06/14 22:57:08 31C1E026 r (reader) Mouse_hdplus [mouse] ATR: 0E F8 00 BC FB FE 00 BC FC FC FE 82 FE 00 FE F2 F8 FE F2 FF 72 FC
2024/06/14 22:57:08 31C1E026 r (reader) Mouse_hdplus [mouse] ERROR: Could not read reader->convention
2024/06/14 22:57:08 31C1E026 r (reader) Mouse_hdplus [mouse] Error activating card.
2024/06/14 22:57:09 31C1E026 r (reader) Mouse_hdplus [mouse] ATR: 0E F8 00 BC FB FE 00 BC FC FC FE 82 FE 00 FE F2 F8 FE F2 FF 72 FC
2024/06/14 22:57:09 31C1E026 r (reader) Mouse_hdplus [mouse] ERROR: Could not read reader->convention
2024/06/14 22:57:09 31C1E026 r (reader) Mouse_hdplus [mouse] Error activating card.
2024/06/14 22:57:10 31C1E026 r (reader) Mouse_hdplus [mouse] ATR: 0E F8 00 BC FB FE 00 BC FC FC FE 82 FE 00 FE F2 F8 FE F2 FF 72 FC
2024/06/14 22:57:10 31C1E026 r (reader) Mouse_hdplus [mouse] ERROR: Could not read reader->convention
2024/06/14 22:57:10 31C1E026 r (reader) Mouse_hdplus [mouse] Error activating card.
2024/06/14 22:57:11 31C1E026 r (reader) Mouse_hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2024/06/14 22:57:11 31C1E026 r (reader) Mouse_hdplus [mouse] card initializing error
2024/06/14 22:57:12 00000000 s (main) init for all local cards done
2024/06/14 22:57:12 00000000 s (emmcache) loaded 0 emmcache records from /var/media/ftp/addon/oscam/oscam.emmcache in 0 ms
2024/06/14 22:57:12 00000000 s (emmcache) loaded 0 emmstat records from /var/media/ftp/addon/oscam/oscam.emmstat in 0 ms
2024/06/14 22:57:12 00000000 s (anticasc) anti cascading disabled
2024/06/14 22:57:12 00000000 s (gbox) local gbox failed init
2024/06/14 22:57:12 3DA070A8 c (client) encrypted cccam-client 192.168.3.250 granted (wohnen, au=auto (11 reader))
2024/06/14 22:57:13 3DA070A8 c (ecm) wohnen (P: 1830:EF15: #CW=0000000000000000000000000000000069B77329AD5E3366DDE6D0AF0288B9B HOP: rejected group (1 ms) - RTL 2 HD (no matching reader)
2024/06/14 22:57:22 3DA070A8 c (ecm) wohnen (P: 1830:EF15: #CW=00000000000000000000000000000000:048CC282BA0F89DB5F23E7C6E72786D7 HOP: rejected group (0 ms) - RTL 2 HD (no matching reader)
2024/06/14 22:57:32 3DA070A8 c (ecm) wohnen (P: 1830:EF15: #CW=00000000000000000000000000000000:88C4F5B42938C6CA10BD29BE54B90C55 HOP: rejected group (0 ms) - RTL 2 HD (no matching reader)

Server

Spoiler

reader]
label = Mouse_hdplus
protocol = mouse
device = /dev/ttyUSB0
localcards = 1830:000000,003411
caid = 1830
boxkey = abc
rsakey = xyz
detect = cd
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,3,2,0

Was passt nicht?

Spoiler

Du musst Regestriert sein, um das angehängte Bild zusehen.

Gesendet von meinem SM-G975F mit Tapatalk

 

[MKLST2]

lösch mal cardmhz und mhz, den localcards-Eintrag brauchts auch nicht. Nach speichern restart.

Hab gelesen das es an MHZ Einstellungen liegen soll.

 

[16v]

Jupp, das wars.


Gesendet von meinem SM-G975F mit Tapatalk

 

[MKLST2]

immer schön wenns wieder läuft

 

[16v]

Hab mir ja die Mäuse gekauft, und es lief jetzt ein paar Tage ganz gut.

Vor 2 Tagen dass:

Spoiler

02 23:29:33 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:33 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:33 221022EC r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:29:35 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:35 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:36 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=00000000000000000000000000000000:E5CB23CDFA90689A2261576823C39A7A HOP: timeout (5000 ms) by Mouse_hdplus - ProSieben MAXX HD
2024/07/02 23:29:37 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:37 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:37 221022EC r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:29:39 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=00000000000000000000000000000000:AF8B7664732E6783D65BBDB57DC8BDC1 HOP: timeout (5000 ms) by Mouse_hdplus - ProSieben MAXX HD
2024/07/02 23:29:39 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:39 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:42 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:42 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:42 221022EC r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:29:44 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:44 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:46 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:46 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:46 221022EC r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:29:48 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:48 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:53 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:53 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:53 221022EC r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:29:55 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:55 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:56 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=00000000000000000000000000000000:099955B2E116D71F373BDCBF65E55B6F HOP: timeout (5001 ms) by Mouse_hdplus - ProSieben MAXX HD
2024/07/02 23:29:57 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:57 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:29:57 221022EC r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:29:59 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=00000000000000000000000000000000:F32FCDFA401D87BE5CD4646A27524D2F HOP: timeout (5001 ms) by Mouse_hdplus - ProSieben MAXX HD
2024/07/02 23:29:59 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:29:59 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:30:02 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:30:02 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:30:02 221022EC r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:30:04 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:30:04 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:30:06 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:30:06 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:30:06 221022EC r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:30:08 221022EC r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:30:08 221022EC r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:30:09 6120A424 h (webif) reader Mouse_hdplus disabled by WebIf
2024/07/02 23:30:10 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=00000000000000000000000000000000:CB2296DBC237AC4AAE1FFCC1944CB7E8 HOP: rejected group (1 ms) - ProSieben MAXX HD (no matching reader)
2024/07/02 23:30:21 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=00000000000000000000000000000000:C1A995879752E1F02C72AD80BB43A26F HOP: rejected group (0 ms) - ProSieben MAXX HD (no matching reader)
2024/07/02 23:30:29 6120A424 h (reader) Mouse_hdplus [nagra] Restarting reader
2024/07/02 23:30:29 6120A424 h (reader) Mouse_hdplus [nagra] creating thread for device /dev/ttyUSB0
2024/07/02 23:30:29 6120A424 h (webif) reader Mouse_hdplus enabled by WebIf
2024/07/02 23:30:29 67051F3F r (reader) Mouse_hdplus [nagra] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2024/07/02 23:30:30 67051F3F r (reader) Mouse_hdplus [nagra] card detected
2024/07/02 23:30:31 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=00000000000000000000000000000000:C4B636A411C28C65E55F66E526F7EDC3 HOP: rejected group (1 ms) - ProSieben MAXX HD (no matching reader)
2024/07/02 23:30:32 67051F3F r (reader) Mouse_hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2024/07/02 23:30:32 67051F3F r (reader) Mouse_hdplus [mouse] Setting baudrate to 111600 bps
2024/07/02 23:30:33 67051F3F r (reader) Mouse_hdplus [mouse] detect native nagra card
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [mouse] ready for requests
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [mouse] found card system nagra
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] ROM: D N A S P 1 4 2
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] REV: R e v G C 6
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] SER: ############
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] CAID: 1830
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] Prv.ID: 00 00 00 00
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] IRD ID: ############
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] active to: 2024/08/23 12:59
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] -----------------------------------------
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] |id |tier |valid from |valid to |
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] +----+--------+------------+------------+
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] |8011|0BEA |2024/02/26 |2025/02/27 |
2024/07/02 23:30:34 67051F3F r (reader) Mouse_hdplus [nagra] -----------------------------------------
2024/07/02 23:30:40 67051F3F r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:30:40 67051F3F r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:30:40 67051F3F r (reader) Mouse_hdplus [nagra] Warning: needed try nr 2, next ECM has some delay
2024/07/02 23:30:42 67051F3F r (reader) Mouse_hdplus [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2024/07/02 23:30:42 67051F3F r (reader) Mouse_hdplus [nagra] T1 Resync command successful ifsc = 251
2024/07/02 23:30:42 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=00000000000000000000000000000000:0F7FBDCF32296DB8FE528ADF2EED0A65 HOP: not found (1314 ms) by Mouse_hdplus - ProSieben MAXX HD (lg)
2024/07/02 23:30:47 67051F3F r (reader) Mouse_hdplus [nagra] wohnen emmtype=global, len=150 (hex: 0x96), cnt=2: written (482 ms)
2024/07/02 23:30:55 2C665F31 c (ecm) wohnen (P: 1830:EF78: #CW=8B8D556D748C090909105C75081A587A:1615C45EEA93074FEC81C10DF625999E HOP: found (322 ms) by Mouse_hdplus - ProSieben MAXX HD (lg)
2024/07/02 23:30:56 67051F3F r (reader) Mouse_hdplus [nagra] wohnen emmtype=global, len=150 (hex: 0x96), cnt=3

Is der ausgestiegen.
Ein paar mal Neustart, ab und anstecken, seitdem läuft sie wieder.

Wisst ihr, woran das gelegen haben könnte?

Gesendet von meinem SM-G975F mit Tapatalk

 

[waves]

• USB Kabel
• Stromversorgung der Reader

 

[Kind regards]

detect=cd, mhz=357, cardmhz=357

Sie müssen registriert sein, um Links zu sehen.

 

[Vigor]

Aktiven USB-Hub verwenden.

 

[pehedima]

Kontakte der Karte reinigen.

Es deutet auf ein Kommunikationsproblem mit der Karte hin, dass all die zuvor genannten Ursachen haben kann.
Also mal der Reihe nach durchgehen.

 

[16v]

Aktiven USB-Hub verwenden.

Is 1. Nur eine Mouse, und die hängt direkt an der Fritte.

Kontakte der Karte reinigen.

Es deutet auf ein Kommunikationsproblem mit der Karte hin, dass all die zuvor genannten Ursachen haben kann.
Also mal der Reihe nach durchgehen.

Danke, ich putze.

Sie müssen registriert sein, um Links zu sehen.

In der server ist NUR "cd" eingetragen.
Siehe weiter oben, die anderen beiden Einträge wurden entfernt.
Damit lief die Karte nicht.

Aber ich werde auch das testen.

Ich verstehe deinen Link nicht...
Gesendet von meinem SM-G975F mit Tapatalk

 

[Kind regards]

hier läuft es so

Du musst Regestriert sein, um das angehängte Bild zusehen.

und der Link sollt dir zeigen das die Karte was die Karte kann:
Fi=512, Di=16, 32 cycles/ETU (125000 bits/s at 4.00 MHz, 156250 bits/s for fMax=5 MHz)

 

[16v]

Hast Du in der server:
detect
Mhz
Und cardmhz
eingetragen?

Hatte ich auch, wenn Du weiter oben schaust, aber damit lief die Karte gar nicht.
Erst als mir geraten wurde mhz und cardmhz zu löschen, lief sie.

Ich verstehe das mit dem Link und was Du mir dazu sagst immer noch nicht.

Gesendet von meinem SM-G975F mit Tapatalk