Raspi Karten werden nicht gelesen

[pucy]

Hallo Gemeinde
Ich habe einen Raspberry 2 mit 2 Easymouse 2 das Oscam build 6089 läuft habe jetzt die HD+ Karte in den Reader geschoben und habe im log folgendes
hdplus card detected
Error activating card drei mal
card initializing error
Ich habe die Karte sonst in meiner Dream und da läuft sie mit Oscam einwandfrei.

 

[Derek Buegel]

AW: Raspi Karten werden nicht gelesen

Hast Du IPC am laufen?
Aktuallisiere Deine oscam

o compile

Ansonsten Konfigs posten. Glaskugel ist in Reparatur.

MfG

 

[pucy]

Bin dabei melde mich wenn fertig

So fertig leider das gleiche Bild hier meine Oscam-Server

Spoiler

[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB1
caid = 1843
rsakey = xxxxxxxxxxxxxxxxxxxxx
boxkey = xxxxxxxxxxxxxxxxxxxxx
detect = cd
mhz = 600
cardmhz = 357
group = 2
emmcache = 1,1,2

Das gleiche mit meiner Sky Kabel Karte

Spoiler

[reader]
label = sky
protocol = mouse
device = /dev/ttyUSB0
key = 0102030405060708091011121314
caid = 1722,1835
boxkey = 1122334455667788
detect = cd
mhz = 368
cardmhz = 600
ident = 1722:000000;1835:000000
group = 1
emmcache = 1,3,2

 

[Alex]

AW: Raspi Karten werden nicht gelesen

Wie sieht den das log beim start von Oscam aus?
mhz = 368 kann btw. gar nicht sein, sofern es sich um eine Easymouse handelt

 

[pucy]

AW: Raspi Karten werden nicht gelesen

Also das log sieht so aus

Spoiler

>> OSCam << cardserver started at Thu Mar 26 17:13:12 2015
-------------------------------------------------------------------------------
2015/03/26 17:13:12 76F2B210 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (armv6l-pc-linux)
2015/03/26 17:13:12 76F2B210 s version=1.10rc-svn, build #6089, system=armv6l-pc-linux, nice=0
2015/03/26 17:13:12 76F2B210 s client max. idle=120 sec, debug level=0
2015/03/26 17:13:12 76F2B210 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2015/03/26 17:13:12 76F2B210 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2015/03/26 17:13:12 76F2B210 s Cannot open file "/var/etc/oscam.services" (errno=2 No such file or directory)
2015/03/26 17:13:12 76F2B210 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/03/26 17:13:12 76F2B210 s signal handling initialized (type=sysv)
2015/03/26 17:13:12 76F2B210 s can't open file "/var/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2015/03/26 17:13:12 76F2B210 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2015/03/26 17:13:12 76F2B210 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2015/03/26 17:13:12 76F2B210 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2015/03/26 17:13:12 76F2B210 s monitor: disabled
2015/03/26 17:13:12 76F2B210 s camd33: disabled
2015/03/26 17:13:12 76F2B210 s camd35: disabled
2015/03/26 17:13:12 76F2B210 s cs378x: disabled
2015/03/26 17:13:12 76F2B210 s newcamd: initialized (fd=7, port=22000, crypted)
2015/03/26 17:13:12 76F2B210 s CAID: 1830
2015/03/26 17:13:12 76F2B210 s provid #0: 003411
2015/03/26 17:13:12 76F2B210 s radegast: disabled
2015/03/26 17:13:12 76F2B210 s http thread started
2015/03/26 17:13:12 76F2B210 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/03/26 17:13:12 76B7D470 h HTTP Server listening on port 16002
2015/03/26 17:13:12 76F2B210 s waiting for local card init
2015/03/26 17:13:13 76F2B210 s init for all local cards done
2015/03/26 17:13:13 76F2B210 s anti cascading disabled
2015/03/27 15:25:01 76B7D470 h Restart requested by WebIF from 192.168.200.11
2015/03/27 15:25:01 76B7D470 h restart oscam requested
2015/03/27 15:25:02 76B7D470 h HTTP Server: Shutdown requested.
2015/03/27 15:25:02 76F2B210 s userdb 1 accounts freed

- - - - - - - - - -

Kann mir einer sagen was ich bei den Dib Schaltern der Easymouse einschtellen muss könte der Fehler sein oder

 

[Alex]

AW: Raspi Karten werden nicht gelesen

Das ist doch noch ein log von Version #6089. Kein o compile gemacht?
außerdem sind da keine Reader aktiv

 

[Derek Buegel]

AW: Raspi Karten werden nicht gelesen

Hast IPC am laufen? dann würde ich mal UDEV-Rules über IPC-Web-If einstellen. (System - Manager)
Stimmen die device? Vlt. mal USB0 und USB1 tauschen.
Evtl hilft Dir das auch weiter
https://www.digital-eliteboard.com/...gurationsvorschlaege-fuer-diverse-karten.html

MfG

 

[pucy]

AW: Raspi Karten werden nicht gelesen

Kann mir einer sagen was ich bei den Dib Schaltern der Easymouse einschtellen muss könte der Fehler sein oder

- - - - - - - - - -

Hier die aktuelle log sorry

Spoiler

>> OSCam << cardserver started at Fri Mar 27 15:25:02 2015
-------------------------------------------------------------------------------
2015/03/27 15:25:02 76F2B210 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (armv6l-pc-linux)
2015/03/27 15:25:02 76F2B210 s version=1.10rc-svn, build #6089, system=armv6l-pc-linux, nice=0
2015/03/27 15:25:02 76F2B210 s client max. idle=120 sec, debug level=0
2015/03/27 15:25:02 76F2B210 s max. logsize=2000 Kb, loghistorysize=1024 bytes
2015/03/27 15:25:02 76F2B210 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2015/03/27 15:25:02 76F2B210 s services reloaded: 0 services freed, 12 services loaded, rejected 0
2015/03/27 15:25:02 76F2B210 s userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2015/03/27 15:25:02 76F2B210 s signal handling initialized (type=sysv)
2015/03/27 15:25:02 76F2B210 s 531 service-id's loaded in 3ms
2015/03/27 15:25:02 76F2B210 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2015/03/27 15:25:02 76F2B210 s 7 provid's loaded
2015/03/27 15:25:02 76F2B210 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2015/03/27 15:25:02 76F2B210 s monitor: disabled
2015/03/27 15:25:02 76F2B210 s camd33: disabled
2015/03/27 15:25:02 76F2B210 s camd35: disabled
2015/03/27 15:25:02 76F2B210 s cs378x: disabled
2015/03/27 15:25:02 76F2B210 s newcamd: disabled
2015/03/27 15:25:02 76F2B210 s radegast: disabled
2015/03/27 15:25:02 76F2B210 s http thread started
2015/03/27 15:25:02 76F2B210 s creating thread for device /dev/ttyUSB0
2015/03/27 15:25:02 76B7D470 h HTTP Server listening on port 20000
2015/03/27 15:25:02 76B71470 r reader thread started (thread=76B71470, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=600)
2015/03/27 15:25:02 76F2B210 s creating thread for device /dev/ttyUSB1
2015/03/27 15:25:02 76371470 r reader thread started (thread=76371470, label=hdplus, device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=368)
2015/03/27 15:25:02 76F2B210 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/03/27 15:25:02 76F2B210 s waiting for local card init
2015/03/27 15:25:06 76F2B210 s init for all local cards done
2015/03/27 15:25:06 76F2B210 s anti cascading disabled
2015/03/27 15:31:36 76371470 r hdplus card detected
2015/03/27 15:31:46 76371470 r Error activating card.
2015/03/27 15:31:57 76371470 r Error activating card.
2015/03/27 15:32:08 76371470 r Error activating card.
2015/03/27 15:32:08 76371470 r card initializing error
2015/03/27 15:35:04 76B7D470 h Restart requested by WebIF from 192.168.200.11
2015/03/27 15:35:04 76B7D470 h restart oscam requested
2015/03/27 15:35:04 76B7D470 h HTTP Server: Shutdown requested.
2015/03/27 15:35:04 76F2B210 s killing reader sky
2015/03/27 15:35:05 76F2B210 s thread 76B71470 killed!
2015/03/27 15:35:05 76F2B210 s killing reader hdplus
2015/03/27 15:35:05 76F2B210 s thread 76371470 killed!
2015/03/27 15:35:05 76F2B210 s userdb 11 accounts freed

 

[Derek Buegel]

AW: Raspi Karten werden nicht gelesen

https://www.digital-eliteboard.com/224793-smartmouse-easymouse-2-konfigurationen.html
#6089
Diese Version ist aus der Dinosaurierzeit.

MfG

 

[Alex]

AW: Raspi Karten werden nicht gelesen

Bei der HD Karte: 5V, Phoenix, Pfeil nach Rechts, 6 MHz.

P.S.: Bau dir endliche eine neue Binary mit o compile

 

[pucy]

So habe die Easy jetzt eingestellt nun sieht das Log schon anders aus aber immernoch Fehler
siehe log

Spoiler

>> OSCam << cardserver started at Fri Mar 27 17:27:17 2015
-------------------------------------------------------------------------------
2015/03/27 17:27:17 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10642 (arm-linux-gnueabihf)
2015/03/27 17:27:17 0 s (main) System name = Linux
2015/03/27 17:27:17 0 s (main) Host name = Oscam-Server
2015/03/27 17:27:17 0 s (main) Release = 3.18.7-v7+
2015/03/27 17:27:17 0 s (main) Version = #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015
2015/03/27 17:27:17 0 s (main) Machine = armv7l
2015/03/27 17:27:17 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2247
2015/03/27 17:27:17 0 s (config) services reloaded: 0 services freed, 12 services loaded, rejected 0
2015/03/27 17:27:17 0 s (config) userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2015/03/27 17:27:17 0 s (main) signal handling initialized
2015/03/27 17:27:17 0 s (config) 531 service-id's loaded in 6 ms
2015/03/27 17:27:17 0 s (config) 7 provid's loaded
2015/03/27 17:27:17 0 s (net) cccam: initialized (fd=5, port=12000, ip=192.168.200.100)
2015/03/27 17:27:17 0 s (reader) sky [mouse] creating thread for device /dev/ttyUSB0
2015/03/27 17:27:17 0 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB1
2015/03/27 17:27:17 0 s (reader) axel [cccam] creating thread for device aero090176.ddns.net
2015/03/27 17:27:17 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/03/27 17:27:17 0 s (main) waiting for local card init
2015/03/27 17:27:17 133E60 p (reader) aero090176.ddns.net: resolved ip=93.221.43.206
2015/03/27 17:27:17 133E60 p (reader) axel [cccam] connecting to aero090176.ddns.net:18001
2015/03/27 17:27:17 131330 h (webif) webif: decompressed 157417 bytes back into 368408 bytes
2015/03/27 17:27:17 131330 h (webif) HTTP Server running. ip=192.168.200.100 port=20000
2015/03/27 17:27:17 133108 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75142
2015/03/27 17:27:17 1335B0 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75141
2015/03/27 17:27:17 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 0e time_us 6001
2015/03/27 17:27:17 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value f0 time_us 50
2015/03/27 17:27:17 133E60 p (reader) axel [cccam] proxy initialized, server aero090176.ddns.net:18001
2015/03/27 17:27:17 133108 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75122
2015/03/27 17:27:17 133108 r (reader) sky [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=600)
2015/03/27 17:27:17 1335B0 r (reader) hdplus [mouse] Buffers readed 2 bytes total time_us 81266
2015/03/27 17:27:17 1335B0 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] card detected
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75172
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 7f time_us 1354
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value bc time_us 26
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value 7f time_us 1367
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 70 time_us 25
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 8e time_us 1261
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1447
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 1356
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 4e time_us 1461
2015/03/27 17:27:18 1335B0 r (reader) hdplus [mouse] Buffers readed 8 bytes total time_us 83903
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 8f time_us 1389
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 7f time_us 31
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value bc time_us 1218
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 7f time_us 29
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 70 time_us 1373
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1304
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 30
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 8e time_us 1378
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 4e time_us 1304
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Buffers readed 9 bytes total time_us 83749
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] ERROR: Could not read reader->convention
2015/03/27 17:27:19 1335B0 r (reader) hdplus [mouse] Error activating card.
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75200
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 8f time_us 1524
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 7f time_us 29
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value bc time_us 1226
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 7f time_us 85
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 70 time_us 81
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1291
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 1271
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 8e time_us 1393
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 4e time_us 1316
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Buffers readed 9 bytes total time_us 84114
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 7f time_us 1473
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value bc time_us 32
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value 7f time_us 1289
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 70 time_us 31
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 8e time_us 1304
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1345
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 1510
2015/03/27 17:27:20 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 4e time_us 1176
2015/03/27 17:27:21 1335B0 r (reader) hdplus [mouse] Buffers readed 8 bytes total time_us 84069
2015/03/27 17:27:21 1335B0 r (reader) hdplus [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
2015/03/27 17:27:21 1335B0 r (reader) hdplus [mouse] ERROR: Could not read reader->convention
2015/03/27 17:27:21 1335B0 r (reader) hdplus [mouse] Error activating card.
2015/03/27 17:27:21 1335B0 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75222
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 8f time_us 1372
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 7f time_us 89
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value bc time_us 2986
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 7f time_us 48
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 70 time_us 70
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 36
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 912
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 8e time_us 1467
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 4e time_us 1262
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Buffers readed 9 bytes total time_us 87747
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 8e time_us 1227
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 8e time_us 1366
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value 8e time_us 1278
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 4e time_us 1073
2015/03/27 17:27:22 1335B0 r (reader) hdplus [mouse] Buffers readed 4 bytes total time_us 81198
2015/03/27 17:27:23 1335B0 r (reader) hdplus [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
2015/03/27 17:27:23 1335B0 r (reader) hdplus [mouse] ERROR: Could not read reader->convention
2015/03/27 17:27:23 1335B0 r (reader) hdplus [mouse] Error activating card.
2015/03/27 17:27:23 1335B0 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/27 17:27:23 1335B0 r (reader) hdplus [mouse] card initializing error
2015/03/27 17:27:24 0 s (main) init for all local cards done
2015/03/27 17:27:24 0 s (anticasc) anti cascading disabled
2015/03/27 17:43:52 1335B0 r (reader) hdplus [mouse] card detected
2015/03/27 17:43:52 1335B0 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75145
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 8f time_us 1411
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 7f time_us 57
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value bc time_us 34
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 7f time_us 892
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 70 time_us 35
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1108
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 1126
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 8e time_us 1201
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 4e time_us 1193
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Buffers readed 9 bytes total time_us 84284
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 7f time_us 1489
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value bc time_us 34
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value 7f time_us 1077
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 70 time_us 34
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 8e time_us 1028
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1285
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 1206
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 4e time_us 1259
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Buffers readed 8 bytes total time_us 84101
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] ERROR: Could not read reader->convention
2015/03/27 17:43:53 1335B0 r (reader) hdplus [mouse] Error activating card.
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75141
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 7f time_us 1428
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value bc time_us 37
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value 7f time_us 34
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 70 time_us 795
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 8e time_us 1202
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1284
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 1215
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 4e time_us 1198
2015/03/27 17:43:54 1335B0 r (reader) hdplus [mouse] Buffers readed 8 bytes total time_us 84034
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 8f time_us 1490
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 7f time_us 35
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value bc time_us 983
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 7f time_us 34
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 70 time_us 1107
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1208
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 34
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 8e time_us 1040
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 4e time_us 1285
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Buffers readed 9 bytes total time_us 83980
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] ERROR: Could not read reader->convention
2015/03/27 17:43:55 1335B0 r (reader) hdplus [mouse] Error activating card.
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75140
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 8f time_us 1370
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 7f time_us 35
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value bc time_us 1008
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 7f time_us 34
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 70 time_us 1150
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 34
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 1105
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 8e time_us 1272
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 4e time_us 1293
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Buffers readed 9 bytes total time_us 84059
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 8f time_us 1313
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 7f time_us 36
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 3 value bc time_us 916
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 7f time_us 48
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 5 value 70 time_us 1019
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 6 value 8e time_us 1206
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 7 value 8e time_us 1209
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 8e time_us 1212
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 4e time_us 33
2015/03/27 17:43:56 1335B0 r (reader) hdplus [mouse] Buffers readed 9 bytes total time_us 83883
2015/03/27 17:43:57 1335B0 r (reader) hdplus [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
2015/03/27 17:43:57 1335B0 r (reader) hdplus [mouse] ERROR: Could not read reader->convention
2015/03/27 17:43:57 1335B0 r (reader) hdplus [mouse] Error activating card.
2015/03/27 17:43:57 1335B0 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/27 17:43:57 1335B0 r (reader) hdplus [mouse] card initializing error

So ich habe noch mal alles durgesehen und was soll ich sagen es geht. :wacko1:
An alle die mir geholfen haben recht herzlichen dank, :emoticon-0137-clapp