AW: QUA la Sbox 0.0.4-5
Proprio cosi Savio
È un agiornamento che va fatto solo dai possessori della Card Tivu-Sat.
Pecui chi non possiede la Card non deve fare nessun aggiornamento.
La Oscam è in fase di perffezzione, arriverà anche quela.
No indo funziona con tute le Carde
(PowerPC, MIPS, X86 & wrt54gl)
What's New? 0.0.4-6
-Bugs solved
+Added support for NDS smartcards
+Added support for Irdeto smartcards
+Added support for Tiger/Ncmed smartcards
+Added Webinterface
ToDo
+Sleep alot
SmartCards Supported:
System EMM ECM SCI Phoenix
-----------------------------------
Nagra2/3 OK OK OK OK
Nagra Tiger/NCMED OK OK OK OK
Viaccess KO OK OK OK
Seca OK OK OK OK
Irdeto OK OK OK KO
NDS KO OK OK KO
sbox.ppc enigma1
sbox.mips enigma2
sbox.x86 Linux PC
sbox.wrt54gl Linksys router
PER LA CONFIGURAZIONE E FACILE E TUTTO SCRITO NELLA Sbox.Config
Solo per la TIGER003 ci vuole la Rsa e la boxkey
[main]
server_only=0 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/var/bin/users.sbox # users list
webinterface=0 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0
ncdserver=0
deskey=0102030405060708091011121314
port=33000
mhz=368
Se avede piu Letori basta agiugere slot0,slot1,slot2 E COSI VIA ESEMBIO SE AVETE UN LETORE INTERNO ESEMPIO DM 800 e UN USB SMART
[slot1]
active=1
sci=/dev/usb/tts/0
ncdserver=0
deskey=0102030405060708091011121314
port=33001
mhz=600
#
Nagra2/3 Example # Per TivuSat e
TIGER003
[
TIGER003] # nagra2 camid (4 bytes)
rsa=XXXXXXXXX # rsa "n" from this card (like newcs)
boxkey=XXXXXXXX # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/keys/port.list # path from port.list
#
Nagra tiger/ncmed Example
[CCCCCCCC] # nagra camid (4 bytes)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#
Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#
Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#
Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#
NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
#
[TIGER547] <- this is the rom version from your card
#
rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
POI METERE I SLOT NELLA USER.SBOX COSI SE AVEDE SOLO QUELLO INTERNO SI MEDE SOLO [ slot0 ]
ALTRIMENDI MEDETE ALTRI slot CON LE RELADIVE USER E PASSWORD
#ESEMPIO configuration Per sbox cardclient server
[slot0] # slot to connect
user=test
pass=test
au=1
# [slot1] # slot to connect
# user=sky de
# pass=alberto1
# au=1